Dell :: Memory Options For Latitude E6430?
Aug 3, 2013
I'm planning to purchase a Dell Latitude E6430 in a few days time but I have a couple of things to clarify before I purchase this laptop. The question is, Dell manual correctly says this supports up to 16GB of RAM. However Dell does not provide/ship 16GB of ram with this laptop.
I would purchase aftermarket 16GB of ram to do what I want to do with this laptop. But I'm uncertain which RAM specification I should buy. Should I buy DDR3L (1.35V) or DDR3 (1.5V) SODIMM ?
This is what the Latitude E6430 manual says :
MemoryMemory connector two SODIMM slotsMemory capacity 1 GB, 2 GB, or 4 GBMemory type DDR3 SDRAM (1600 MHz)Minimum memory 2 GB Maximum memory 16 GB
View 11 Replies
ADVERTISEMENT
Feb 13, 2013
Weird issue... I cannot enable wireless.
The driver is current
The switch on the side is on.
In device manager all looks fine.
When I try and enable it ... it says enabling but never get enabled.
Tried dleting the driver completely and loding the current... no joy.
View 1 Replies
View Related
Apr 4, 2013
A07 Bios has been validated on the following operating systems:1. Microsoft Windows 82. Microsoft Windows 7 3. Microsoft Windows XP Service Pack 3.
Why for the Bios A09 and A11 is not shown for what operating systems are validated?
View 2 Replies
View Related
Nov 5, 2014
Attempting to install 1600x900 screen and getting wrong colors and bad resolution. I understand the cable may need replacement.
View 5 Replies
View Related
Mar 26, 2014
I have a Dell Latitude E6430 and touch pad has not worked since day one I got it but I always have a mouse plugged into the USB so I never used the Touch pad since testing it on day one.
I download the Dell Diagnostic tool and ran it under the "Complete Setting" and everything back as passed.
View 5 Replies
View Related
Feb 24, 2013
I got two E6430 - USB 3 does not work with windows 8... (Installed from a new win 8 DVD)...
View 2 Replies
View Related
Mar 25, 2013
I m trying to install ESXi 5.0 as a VM in LATITUDE E6430 ,but it gives me the following error
No network adapters were detected.Either no network adapters are physically connected to the system or a suitable driver could not be located.A third party driver may be required.
I have found that DELL customized image is available but only for servers (tried that too but not working)...
View 1 Replies
View Related
Jan 23, 2015
I used to be a Dell Technician too, 578260. I got a latitude e6430 given to me from the company I am currently working now Prodagio Software. I am locked out of my BIOS but manage to use the laptop using finger print. I forgot my password and with that problem I am not able to modify anything inside the BIOS. I am afraid to do a reset because I might lose the A08 upgrade.
View 3 Replies
View Related
Mar 16, 2013
I just purchased a Latitude E6430 to replace my aging Latitude D630. I like to keep a second AC adaptor in my laptop case just for travel. When talking with the telephone sales agent at Dell, she told me the two adaptors are not compatible, yet both are PA-12, 65W, 19.5v, 3.34A. the only difference, is the old one is 2-pin and the new one is 3-pin. Is she blowing smoke at me?
I also have an off-brand "universal" audo/air/AC adaptor for the old computer that's, 90W, 19v, 2.7A that was listed as compatible with the D630. Are these all compatible with each other?
View 1 Replies
View Related
Mar 6, 2013
I have a problem with my Latitude E6430 i7-3720QM upgraded to Windows 8,, Bios A09, 8 core...Fan is constantly running and drying the battery out. Tem range between 60-70C. All tests from Dell webpage passed successfully. Tests from Intel Diagnostic tools passed. However, fun is always running, lap top is warm and battery goes down very quickly, in an hour. Under windows 7 it used to last much longer. I even did a clean install of Windows 8 and the problem persists
View 15 Replies
View Related
Dec 16, 2013
When I take it off the internet works fine.
Running two Toshiba 32L2300U 32" tv's that have VGA connections. Since the eport only has one VGA connection the other is connected with a DisplayPort to VGA adapter.
I need to work from home on two monitors, not the laptop in a dock with the lid open and one TV screen. (Internet is restored when I open the lid as it's in the dock but only one monitor works.
View 2 Replies
View Related
Apr 30, 2014
Every time I run the Client System Update tool and check for updates I get the error message "Check for updates failed"
I have a Dell Latitude E6430 running Windows 7 SP1 64 bit and I am connected to the internet...
View 2 Replies
View Related
Feb 8, 2009
I think the E4200 is a great machine, and I can probably get one cheap off Dell Outlet. My only real concern here is hard drive capacity. The standard options of 64GB or 128GB SSD aren't going to cut it for me...
I'd want to have at least a 256GB SSD or one of the Toshiba 250GB 5400RPM 1.8" drives.
I know that the E4200 has a 1.8" hard drive slot, so a standard 2.5" notebook hard drive will not work at all.
But its 1.8" slot should mean that regular 1.8" hard drives should work in it, no? Surely the computer can use either a 1.8" SSD drive or 1.8" hard drive
View 5 Replies
View Related
Jan 29, 2009
I just recently purchased a Dell Latitude E4300 and i'm pretty happy with it overall.
However, i'd like to connect an external monitor to it. I noticed that it only has a VGA port (unless i'm blind), but Dell's website makes many references to it having a DISPLAY-PORT.
It even sells an adapter for this model:
http://accessories.us.dell.com/sna/p...9&sku=330-2915
Does this thing have a Display port?
View 4 Replies
View Related
Feb 17, 2014
Though in all adverts it boasts about strong encryption options, I could not find any way of encrypting the disk other than Windows Bitlocker.
In the Dell Data Protection Console, but there are no options in the Encryption Tab. I even downloaded directly from Dell product site DDP Encryption software (650 Mb !) but in the installation, personal installation option is disabled asking for only Enterprise installation which requires some kind of a server.
View 6 Replies
View Related
Apr 14, 2013
I've heard there is a possibility in e6530 laptop to set the battery to only charge to certain level (what would extend li ons battery life). I have updated my bios to A17 in my e6520 but haven't found it.
Is there any way to reach it on my laptop?
View 1 Replies
View Related
Mar 1, 2014
I have a Dell Latitude E6430 laptop running windows 7 64-bit. When I try to use it with a docking station, the USB ports on the docking station do not work. When I try to use a USB mouse with it, it only works with one of the USB ports. When I try using my printer (HP laserjet 1320) through the USB ports, it doesn't work (it did previously with a Dell latitude E6430 running windows 7 64-bit).
I've installed the latest BIOS upgrade, updated the USB and intel chipset drivers. How do I get these working?
View 8 Replies
View Related
Dec 16, 2010
I have a new dell latitude 6510 notebook and now i will install Windows 7 Pro 32 Bit again. When selected "Boot List Option" under bios settings i see legacy and uefi but i can´t "Add Boot Options" - Warning "File System not Found". Windows 7 Pro 32 Bit is installed and working under legacy but not working on uefi. When uefi selcted windows 7 pro 32 Bit is installed and when installation is finish can´t find bootable device.
View 2 Replies
View Related
Nov 21, 2014
I would like to buy a Dell Latitude 6540 and have found out the following statement in the configuration:
“Operating System Recovery Options: no media”.
It also says: "Dell Backup and Recovery: Dell Backup and Recovery Basic"
I think this means that I will not get a recovery disk along with the system.
If so, I wonder how I can re-load the system in case I need it for whatever reason (for example how can re-format the HD if I need it to?)
View 4 Replies
View Related
Mar 3, 2013
In the past we've restrict the boot options on our laptops vis bios sequence to prevent unauthorised reimaging of machines. However I've just noticed our newest Latitude e6230 still list all the devices as available despite these settings. Screenshots attached.
Bios configuration:
Laptop manual boot:
View 1 Replies
View Related
Feb 15, 2009
I'm about to order an E6400 from the dell outlet and was wondering if you all have any advice before i order.
I want to upgrade the memory and HD, but i dont know what to buy exactly.
I want 4 gb of RAM, and the quietest and most inexpensive HD that is 250 or 320gb that I can get. I assume that a 5400rpm is quieter than a 7200rpm drive. Any ideas?
View 8 Replies
View Related
Jan 5, 2015
I have a dell E6400 Latidue with 4 Gig of memory I would like to upgrade to 8 gig. I need for my building control software. Were can I find 8 gig .All I can find is the 4 gig memory updates which is what I already done...
View 3 Replies
View Related
Oct 21, 2014
I keep running into a problem with windows not loading after installing new RAM. I am currently using the original 4GB (2 x 2GB) it came with and I am wanting to go with 8GB (2 x 4GB). I am using the recommended Crucial RAM and I have checked the BIOS which recognizes the new memory. The BIOS is up to date running A16 version. I have not been able to find any settings that would be inhibiting it from running. I have noticed that the currently installed RAM runs a 1067mhz even though it is rated at 1333mhz. As far as I can tell there is no memory remapping feature for the BIOS which does not make sense.
Here is a snap shot of what I have:
Operating System
System Model
Windows 7 Ultimate (x64) Service Pack 1 (build 7601)Install Language: English (United States)System Locale: English (United States)Installed: 9/29/2014 3:01:57 PMBoot Mode: BIOS (Secure Boot not supported)
[Code] .....
View 4 Replies
View Related
Mar 19, 2013
I am running a Dell D630 with Windows XP, 2 gig memory.Recently, I began having an issue where the screen would lock. Unable to move the cursor,, type or anything. This would occur with various pgms, Word, excel, even with just the desktop.Cycling power would allow me to resume for some time, then it would occur again. It doesn’t seem to be load related as it can occur with little going on.I ran checkit and it showed a memory allocation failure. I have read that this may be a false failure with checkit. I’m not sure.
I replaced the RAM (2gig) and the problem still occurs.I have windows allocating virtual memory..I then tried to do a restore, thinking some update got loaded and is causing the problem, but restore fails when I run it.I am thinking possibly a bad sector on the HD, but have not found anything to check this out.
View 6 Replies
View Related
Oct 13, 2008
A friend just showed me his new Dell Vostro lappy. He has 4 GB of DDR2 800mhz memory on it when compared to my 4 GB of DDR2 667mhz memory on my XPS 1530
However, under his windows experience score - he gets 5.9 score for memory operations while I just get a 5.1. I can't believe that a couple of hundred mhz can result in such a drastic difference.
Is there something optimized for his system but not for mine?
View 10 Replies
View Related
Jan 12, 2015
I just purchased a used Elitebook 8540w with i7 quad core and four memory slots (I love it!). It is running 64 bit Windows 7 Professional It came with one 4gb memory module and I purchased an additional 4gb module to bring total RAM to 8gb.
I have the HP document that shows for two 4gb memory modules, one should be in memory slot 1 and the other in memory slot 3 for correct functioning of dual channel memory. All set right?
Not quite. In the Elitebook 8540w, the primary memory slots under the keyboard are clearly labeled "1" and "2" However, the expansion memory slots on the underside of the chassis are also clearly labeled "1" and "2" Opps! There is no "3" and there is no "4" In which of the unfilled three slots do I install the second 4gb module for correct functioning of dual channel memory?
View 3 Replies
View Related
Oct 18, 2014
i having the Acer TravelMate 6493, originally it have 2GB of Memory. Recently, i have addin additional 2GB, mean that currently the system is having 4GB of Memory.
in the BIOS, showing the system is installed with 4GB of Memory, but when come into the windows, it show 4GB installed (2.90GB Usable) .....
View 4 Replies
View Related
Apr 6, 2009
I currently have a latitude x1, it served me well, but it's time to upgrade. My options are something within the 13"-15" screen range --no more external disk drives--such a pain in the backside. My main concern with which i need assistance is what
Dell screen would be best visually? My position requires extensive computer use so I need a screen that would be best on the eyes. What i noticed with my current model is that it puts a lot of strain on my eyes. Perhaps it is the brightness, or perhaps it is the actual quality of the screen, in any case I need help selecting an appropriate model for me.
I specifically want to go with dell because I receive a discount through them.
money is not an issue. I primarily use my notebook for MS Office applications, media editing, and web browsing -- occasionally play a game or two or watch a movie.
My current options are Vostro 1320
screen options- 13.3 ultrasharp WXGA LCD w/true life
or, -anti glare 13.3 WXGA.
XPS Studio 13
-Edge to edge 13.3 HD WXGA LCD
-Edge to edge 13.3 HD WXGA Slim WLED LCD
Latitude E4300
-13.3 Wide screen WXGA WLED panel for latitude ON
View 10 Replies
View Related
Mar 20, 2009
I bought a Inspiron 1545 in the outlet section, got it for $420 with a coupon I got off ebay.
I got the laptop and I absolutely love it! But there is a problem, the graphics card driver keeps crashing, this is an annoying problem and I think it might progressively get worse, so I'm worried.
My options so far that I can think of are:
Do a complete OS reinstall (can I use my dell cdkey to reinstall vista?)
Send it in to get fixed, if that's the case, what kind of fixing will they do?
Thanks.!
Quote:
Log Name: System
Source: Display
Date: 3/20/2009 12:29:18 AM
Event ID: 4101
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: Laptop-909
Description:
Display driver igfx stopped responding and has successfully recovered.
<Provider Name="Display" />
<EventID Qualifiers="0">4101</EventID>
<EventRecordID>25003
View 6 Replies
View Related
Sep 13, 2009
I'm currently running 190.40 drivers for my GeForce 9500M on my SXPS13. Before updating to 190.40, clicking the little green NVIDIA tray icon that shows what mode you're running in allowed me to choose my mode manually through the use of two radio buttons.
Currently, I can only switch between "Boost Performance" and "Save Power" by switching power profiles in Windows. Is there some way I can get back those radio buttons without having to go back to the older driver?
View 3 Replies
View Related
