Dell Latitude E6430 :: USB3 Does Not Work With Windows 8
Feb 24, 2013I got two E6430 - USB 3 does not work with windows 8... (Installed from a new win 8 DVD)...
View 2 RepliesI got two E6430 - USB 3 does not work with windows 8... (Installed from a new win 8 DVD)...
View 2 RepliesI have a Dell Latitude E6430 and touch pad has not worked since day one I got it but I always have a mouse plugged into the USB so I never used the Touch pad since testing it on day one.
I download the Dell Diagnostic tool and ran it under the "Complete Setting" and everything back as passed.
I have a Dell Latitude E6430 laptop running windows 7 64-bit. When I try to use it with a docking station, the USB ports on the docking station do not work. When I try to use a USB mouse with it, it only works with one of the USB ports. When I try using my printer (HP laserjet 1320) through the USB ports, it doesn't work (it did previously with a Dell latitude E6430 running windows 7 64-bit).
I've installed the latest BIOS upgrade, updated the USB and intel chipset drivers. How do I get these working?
Weird issue... I cannot enable wireless.
The driver is current
The switch on the side is on.
In device manager all looks fine.
When I try and enable it ... it says enabling but never get enabled.
Tried dleting the driver completely and loding the current... no joy.
I'm planning to purchase a Dell Latitude E6430 in a few days time but I have a couple of things to clarify before I purchase this laptop. The question is, Dell manual correctly says this supports up to 16GB of RAM. However Dell does not provide/ship 16GB of ram with this laptop.
I would purchase aftermarket 16GB of ram to do what I want to do with this laptop. But I'm uncertain which RAM specification I should buy. Should I buy DDR3L (1.35V) or DDR3 (1.5V) SODIMM ?
This is what the Latitude E6430 manual says :
MemoryMemory connector two SODIMM slotsMemory capacity 1 GB, 2 GB, or 4 GBMemory type DDR3 SDRAM (1600 MHz)Minimum memory 2 GB Maximum memory 16 GB
A07 Bios has been validated on the following operating systems:1. Microsoft Windows 82. Microsoft Windows 7 3. Microsoft Windows XP Service Pack 3.
Why for the Bios A09 and A11 is not shown for what operating systems are validated?
Attempting to install 1600x900 screen and getting wrong colors and bad resolution. I understand the cable may need replacement.
View 5 Replies View RelatedI m trying to install ESXi 5.0 as a VM in LATITUDE E6430 ,but it gives me the following error
No network adapters were detected.Either no network adapters are physically connected to the system or a suitable driver could not be located.A third party driver may be required.
I have found that DELL customized image is available but only for servers (tried that too but not working)...
I used to be a Dell Technician too, 578260. I got a latitude e6430 given to me from the company I am currently working now Prodagio Software. I am locked out of my BIOS but manage to use the laptop using finger print. I forgot my password and with that problem I am not able to modify anything inside the BIOS. I am afraid to do a reset because I might lose the A08 upgrade.
View 3 Replies View RelatedI just purchased a Latitude E6430 to replace my aging Latitude D630. I like to keep a second AC adaptor in my laptop case just for travel. When talking with the telephone sales agent at Dell, she told me the two adaptors are not compatible, yet both are PA-12, 65W, 19.5v, 3.34A. the only difference, is the old one is 2-pin and the new one is 3-pin. Is she blowing smoke at me?
I also have an off-brand "universal" audo/air/AC adaptor for the old computer that's, 90W, 19v, 2.7A that was listed as compatible with the D630. Are these all compatible with each other?
I have a problem with my Latitude E6430 i7-3720QM upgraded to Windows 8,, Bios A09, 8 core...Fan is constantly running and drying the battery out. Tem range between 60-70C. All tests from Dell webpage passed successfully. Tests from Intel Diagnostic tools passed. However, fun is always running, lap top is warm and battery goes down very quickly, in an hour. Under windows 7 it used to last much longer. I even did a clean install of Windows 8 and the problem persists
View 15 Replies View RelatedWhen I take it off the internet works fine.
Running two Toshiba 32L2300U 32" tv's that have VGA connections. Since the eport only has one VGA connection the other is connected with a DisplayPort to VGA adapter.
I need to work from home on two monitors, not the laptop in a dock with the lid open and one TV screen. (Internet is restored when I open the lid as it's in the dock but only one monitor works.
tried to upgrade my Latitude E5510 from 2x2Gb (factury Samsung) to 2x4Gb Corsair CMSO8GX3M2A1333C9. BIOS updated to Rev. A13, latest. Memory is recognized as 8Gb. But booting into Windows7 X64 doesn't work anymore. If I boot from a Lubuntu CD (x86) it runs, naturally only with approx. 4Gb since this is a x86 OS-version. Windows 7 X64 just reboots. If I use Save Mode a reboot occurs when the loading of "ClassPnP.sys" starts. When I put in the old 2x2Gb everything works perfectly. Can't even get into Windows Setup from a clean DVD.
View 1 Replies View RelatedEvery time I run the Client System Update tool and check for updates I get the error message "Check for updates failed"
I have a Dell Latitude E6430 running Windows 7 SP1 64 bit and I am connected to the internet...
I recently purchased an Inspiron 17R SE and have been trying to move all my files, music, videos, etc. from my old desktop PC.
I've successfully transferred about 750GB of data to my USB3.0 backup drive. When I plug it into my new laptop, it appears fine and I can start copying files from it. However, after about 5 minutes of copying, it stops and the Windows Explorer windows close. If I try again, it copies fine for 5 minutes then everything stops again.
I've tried plugging the drive into different ports but the same problem occurs. I've also tried plugging it into a different PC and I can copy the files no problem.
I am thinking a bit later on this year of perhaps upgrading my Envy, as I would love to get USB3.0 and a bit more power on the gaming side would be great.
Not wanting to fork out the money for a brand new one, I thought I might possibly be able to upgrade just the motherboard to the current model (i7 version), which would include the USB3 and 5830 graphics... and would cost me quite a bit less (my current specs are in signature)
I just want to know if that would be possible? I assume that all the other parts are pretty much interchangeable, and from what I can see there were no significant changes to the chassis or anything else from Gen 1 to Gen 2....
The USB3 were working, but I had to do a WIN7 restore (full format of the HD).
The USB3 ports are not working now, they will light up a external HD, but the HD never shows up on My Computer.
I've downloaded and installed "Fresco Logic USB 3.0 Host Controller Driver (SP55093)", but Device Manager still says there is no driver loaded.
I've run Windows Update--everything is up-to-date.
I've run HP Support Assistand updater--no updates available.
I've uninstalled the Fresno Logic USB Root Hub, re-installed the Intel Chipset Driver, rebooted the machine and watched it search for a driver. No driver found to install. So, I run the installation program for the Fresco Logic USB 3.0 Host Controller Driver (SP55093) and reboot. Device Manager still says "The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element."
Fresco Logic USB 3.0 Host Controller is listed under "Other Devices", not "Universal Serial Bus Controllers."
according to the lenovo US site every T440p will come with 4xUSB3 as standard:
[URL]
The psref´s (WE for western europe, but also the worldwide) say it will come with 2xUSB3 and 2xUSB2:
[URL]
All 440p you can order here in Germany unfortunately seem to have 2xUSB3 only.
This is very confusing. Why sould lenovo buy/develop a 2xUSB2 version (USB3 is fully downwards compatible) ?
I have found that mouse etc only works from usb3 slot not from other 2 slots, have tried reinstalling drivers for chipset and usb3 ... I can run a fan stand from other 2 but that is all.
View 4 Replies View RelatedI recently purchased the Latitude E6400 and was wondering if there is a way to set up the fingerprint reader to work for online websites such as gmail etc. It works to log in but can it also work for other things too
View 5 Replies View RelatedI cannot type but I can use the keyboard trackpoint and trackpoint keys. I have tried changing the keyboard, but the same problem persisted. The drivers were good and I can attach keyboard via USB for full functionality. Could it be a problem with the palm rest where the keyboard attaches to or something else?
View 3 Replies View RelatedI have been trying to get to the system setup menu by pressing the F2 key at startup and the boot menu by pressing the F12 key at startup. Neither key works. The notebook proceeds into Windows startup (I am running Win 7 Pro 32-bit). How can I get to the system setup menu and the boot menu on this notebook?
View 9 Replies View RelatedI have old version A05 on my E6410 Bios. I tried to upgrade to A06, then I´d like to upgrade to A07, A09, and then to A13, because i need to have the A09 installed before install A13.I`ve downloaded all the versions, but the problem is that the Dell BIOS Flash window does not start !!!
View 9 Replies View Relatedi have a number of Dell D600 latitude laptops in the organisation,all identicial. Strange thing is that one of them will not work with the docking station, any Docking station to think of it. this is the error message i get " Your power adapter does not supply enough power to run the attached docking station" press F1 to shut down
View 7 Replies View Relatedback lite keyboard doesn't work ....it was working properly 2 days before...
View 1 Replies View RelatedWe are running more than200 dell computers in our company. lately we purchased E7240 for some users but it looks like the AC adapter does not work with the Dell E-Port docking station we have and that cause the USB hubs not to function at all.
Currently the workaround is to plug the AC adapter to the laptop instead of the docking station.
Our BIOS is updated to the latest version. also a message comes up when the ac adapter connected to the docking station before the windows boot up saying the ac adapter won't charge.....
latitude 3440
windows 8.1 64 bit
after switching between user accounts, I can move the cursor around on the screen, but I can't click on anything, not left click or right click
after signing out of the problematic user account and signing back in, the pad works normally
I saw a lot of reports on this problem for linux, but none for windows.
this laptop came with ubuntu installed. I personally installed windows 8.1 64 bit, which is supported, and I installed all the latest drivers.
My new Lattitude laptop powers back on (sort of) when in either sleep or hibernate modes, but I have to power off in order to get the computer to start. Usually happens after a few hours of being in either mode. Does it have something to do with power management?
View 1 Replies View RelatedI have a Dell Latitude E6500 that I have been using for quite a long time. Recently it started acting up, and now it won't start up past the Dell logo. It simply goes to a black screen with a flashing dash. I've restarted it a few times, tried pushing F8, and gone into F12. I tried the Diagnostics through F12, but it takes an extremely long time and has never finished so far. I tried it again this morning, and periodically throughout the test a message like this has shown up:
Error Code 0123. Msg: Error Code 2000-0123 Msg: Memory - integrity test failed. The given error code and message can be used by Dell Technical Support to diagnose problem. Do you want to continue testing?
Yes or No or Retry
I'm not sure what exactly this means, but it keeps popping up. I would like to get through to start up my computer all the way, but that doesn't seem to be an option. Is there anyway for me to wipe it without F8? My cd slot won't open, and I don't have disks anyways. Is it possible to fix it via USB drives? Or F12?
They don't seem to offer W7 with the i7 chipset, even on the business site. Wondering if I can just get the W8 version and downgrade it to W7.
View 1 Replies View Related