Dell Latitude E5510 :: Booting Into Windows 7 X64 Doesn't Work Anymore
Jan 22, 2013
tried to upgrade my Latitude E5510 from 2x2Gb (factury Samsung) to 2x4Gb Corsair CMSO8GX3M2A1333C9. BIOS updated to Rev. A13, latest. Memory is recognized as 8Gb. But booting into Windows7 X64 doesn't work anymore. If I boot from a Lubuntu CD (x86) it runs, naturally only with approx. 4Gb since this is a x86 OS-version. Windows 7 X64 just reboots. If I use Save Mode a reboot occurs when the loading of "ClassPnP.sys" starts. When I put in the old 2x2Gb everything works perfectly. Can't even get into Windows Setup from a clean DVD.
View 1 Replies
ADVERTISEMENT
Feb 17, 2009
I use my Dell laptop as an HTPC, I have never had this problem before but now all the sudden I'm having this problem.
View 10 Replies
View Related
Feb 1, 2009
my CS.
sony tech did a repair on my laptop and when he was done, a piece of the trim wasn't flush near the LCD hinge. To fix this, I put a drop of krazy glue under the hinge (it snaps off) on the panel above the keyboard and was able to fix the problem cleanly.
The problem is, I noticed my caps lock light no longer turns on. I have no clue when this could have happened, since it was under a couple repairs before. But, my worry is my warranty. Do you think they'll complain about replacing it if they see I had to glue a piece together? On the other hand, the light module screws into this panel so, technically they don't need to replace this panel, just the light module.
View 5 Replies
View Related
Nov 4, 2014
Just bought an Aspire ES1-511. Not my first Windows 8.1 laptop, but my first with UEIF firmware.
I've been trying to boot Driveimage from CD to do an offline backup, and guess what, it wouldnt recognise the CD as bootable. Fixed that by setting the boot type to "Legacy" in the BIOS and it boots fine.
My problem is that the mouse doesnt work after booting from the CD. Watching the behaviour of the mouse, it powers up when I press the power button, but powers off immediately the POST completes.
If booting Windows from the HD, power to USB is restored as soon as windows loads to the lock screen.
View 2 Replies
View Related
Feb 19, 2013
I've got my Dell Inspiron n5040 for almost 14 months, on which I upgraded to Windows 8, and now it doesn't start anymore. It tried to start in repair mode, but then it just shows a black screen, which doesn't change.
After running diagnostics I've gotten error info:
Error Code 2000-0142Validation 63358Msg: Hard Drive 0 - S/N WD-WX51A8109114, self test unsuccesful. Status = 7.
View 1 Replies
View Related
Nov 12, 2009
My apple had Mac and XP installed on it. My friend suggested me to install Windows 7 on it. And I thought it was a good idea. So I started my XP and runned it up. When win7 was completely installed everything seemed to work. Except that a few buttons on my keyboard don't work anymore now. The button for throwing out CD's and DVD's don't work anymore. And my 'Fn' button doesn't work anymore. Does anybody else have the same problem as me, or does someone know how to fix this. Because I also can't change the brightness. Which is set to maximum at the moment.
View 10 Replies
View Related
Nov 4, 2014
I have a latitude e5510 that is being forced back into service. I have received support here in updating the bios from A-4 to A16.
But my problem still exists. Any USB thumb drive or larger powered usb devices are not showing in Windows Explorer. The Power is getting to the device but not visible in Explorer.
View 10 Replies
View Related
Mar 26, 2014
I have a Dell Latitude E6430 and touch pad has not worked since day one I got it but I always have a mouse plugged into the USB so I never used the Touch pad since testing it on day one.
I download the Dell Diagnostic tool and ran it under the "Complete Setting" and everything back as passed.
View 5 Replies
View Related
Feb 20, 2013
I have a problem with my dell latitude e5510..... After Updating the Bios last version() ,BIOS has been Locked and i have no access to bios, although system powers up and my windows boots without any problem..... I tried every method searched in internet but no result ... as I realized this model has a high security system...I think by updating the bios a default pass created for the bios.
View 1 Replies
View Related
Apr 25, 2012
I own a Dell Latitude E5510. I *love* this laptop.
However, today I started having a problem with it. The laptop turned off suddenly. When I went to turn it back on, it began to load as usual with the following things on the screen:
1. the circular logo in the center of the screen.
2. the "press f12 for boot menu" thing in the top right corner.
3. the blue loading bar beneath the circular logo in the center.
What happens is the blue bar fills up, but then the screen goes black. It doesn't just instantly go black though. It starts from the top of the screen and moves to the bottom. It does the same thing when I press f12 to get into the boot menu.
View 11 Replies
View Related
Apr 23, 2013
back lite keyboard doesn't work ....it was working properly 2 days before...
View 1 Replies
View Related
Jan 1, 2015
latitude 3440
windows 8.1 64 bit
after switching between user accounts, I can move the cursor around on the screen, but I can't click on anything, not left click or right click
after signing out of the problematic user account and signing back in, the pad works normally
I saw a lot of reports on this problem for linux, but none for windows.
this laptop came with ubuntu installed. I personally installed windows 8.1 64 bit, which is supported, and I installed all the latest drivers.
View 4 Replies
View Related
Oct 19, 2013
I am booting a Dell Latitude E5420 running Windows 7 and after the POST it just shows a blinking cursor..... BUT WAIT... not ALL the time... it does manage to boot into the windows after I choose the HDD from F12 options or sometimes even when I keep on shutting down and starting up again and sometimes when I do a restore checkpoint in the repair options....
The Diagnostic tests are not working when I go through the F12 and just hangs up showing the message -
Examining ACPI interface
Running MATS test
I can't understand... if it was consistently NOT booting or showing a consistent error... but here the behavior is erratic (except for the MATS test failure....
View 16 Replies
View Related
Oct 28, 2009
I've attempted updating my XPS 1640 BIOS to A11 in my notebook.
It hanged up at the half of it (it said "Erasing block 16 of 32") and after waiting for 1 hour, I restarted the computer...
Now it doesn't start up, when I press the power button, the 3 volume keys start to blink for some seconds, then the keyboard light turns on, and the computer turns off after a couple of seconds.
View 10 Replies
View Related
Feb 24, 2013
I have a XPS 17. The trackpad worked well. Then I formatted and reinstalled Windows 7 64bits Home Premium. But the Trackpad doesn't work. I can move the mouse, click etc. but the multiouch doesn't work. I can't scroll.
Some printscreens : [URL] ....
View 3 Replies
View Related
Mar 3, 2013
When I turn my Dell Inspiron 7720 on, integrated webcam often does not work. Camera app in Windows 8 shows "there's a problem with a camera", other apps also show error messages or just a black screen.
After several resets the camera may start to work properly till the next reset. The camera is always shown in the Device Manager without errors and in the USBView I see that at least USB descriptors are correct. Moreover, after several disable/enable cycles in device manager the camera may start to work.
I've created two HDD partitions and installed Windows 7 Pro and Windows 8 Pro (both from original ISO files downloaded from MSDN). On clear Win 8 the camera shows the same problem, but on Win 7 it works properly.
There is no camera driver for Inspiron 7720 on the Dell web-site, thus I've used standard Microsoft driver on both Win 7 and Win 8.
I'm still not sure is it a hardware problem, because it is reproduced only with Windows 8. The computer was initially sold with Ubuntu, but Windows 8 is in the list of supported OS.
Camera IDs are: VID = 0C45 (Sonix), PID = 648D, REV = 2206.
View 15 Replies
View Related
Oct 30, 2012
I have a problem on my laptop. My laptop is HP pavilion g4-1357tx, with Windows 7 64 bit, already updated with new BIOS provided in HP website.
I updated my laptop from Windows 7 32 bit to 64 bit 2 weeks ago. Since then, I can't use the alt buttons, both on the left and right. Some information on internet said that there might be some dusts under the buttons, and I've tried to clean it, but the problem still occur.
View 7 Replies
View Related
Feb 8, 2013
I upgraded my daughters Inspiron 1520 to Windows 8 and everything works well. The only problem we are having is the memory card reader does not work. Windows 8 recognizes it and shows the action center flag and advises us to install a new driver.. We install the driver R188776.exe, install it, and re-boot, but the memory card reader still doesn't work.. Is there another driver we can install?
View 5 Replies
View Related
Oct 7, 2014
My problem is that suddenly keyboard isn't working in windows . it works while entering password, after that it doesn't work . knowing that yesterday it was working properly.
View 3 Replies
View Related
Apr 30, 2014
I have a EliteBook 8730w sinds 2010 and I just installed Windows 8.1.Now I don't have any access to my SD reader.According to the device manager the SD reader driver is up to date and is working, but I don't see the SD reader in the file explorer.The SD reader is a RICOH.In the device manager I have some problems with Other devices:
1) Base system device
2) Base system device
3) Fingerprint sensor
4) Unknown device
I suppose that the problem must be in Other devices.
View 3 Replies
View Related
Jan 2, 2015
I use V3-371-59M8 which model is for windows8 OS only but I use it w/ windows7 OS and it works well but bluetooth doesn't work at all.I got and installed BT drivers(Atheros or intel or Broadcom) for widnows7 but couldn't find any BT devices.
What is the BT adaptor brand (Atheros or intel or Broadcom??) of the model.
View 5 Replies
View Related
Jul 18, 2013
My Dell Inspiron M5010 beeps 7 times and does not work anymore.
I'm no longer covered by warranty, as I purchased this laptop over 3 years ago. What other options do I have to fix my laptop? Ideally, I'd like to recovery everything on my hard-drive, even if the laptop itself no longer works.
View 4 Replies
View Related
Jan 26, 2009
My friends that are into desktop publishing and graphic design are very pro Mac-centric when it comes to their work. They tell me that Macs are better than PCs (with Windows) when it comes to developing their work.
That may have been the case in the past, but Macs are not really necessary for that line of work anymore. Many applications are now more readily developed for Windows based PCs. On Windows, you get the whole Adobe Creative Suite, many audio manipulation programs superior to Garage Band (i.e. Ableton), and other neat applications. The only thing Macs have over Windows is the excellent Final Cut Pro, although Premiere is more than competent.
Many musicians have been noted to be avid Mac users. However, major pop music producers such as Timbaland and Lil' Jon now develop their music under a Windows-based platform.
Is the Mac necessary (or worth it) for doing this type of work other than the sheer chic and hip factor of Macs?
View 10 Replies
View Related
May 8, 2014
I have a HP Pavilion 17-e067cl Notebook PC, it came with Windows 8 pre-installed. I really hate windows 8 so I downgraded, but now my wifi-related drivers are down.
View 9 Replies
View Related
Aug 14, 2012
I updated my Thinkpad with windows 8.1. But the wifi driver doesn't work correctly. After the installation the device was diasabled with code 10. I searched for a new driver and found one from Realtek for win 8. After this installation and the reboot, the wifi works fine. Restarting the notebook again, the device was disabled again. I tried a lot of different drivers - it's always the same: After the first installation and reboot it works, after the second boot, the device is disabled again.
View 2 Replies
View Related
Aug 1, 2014
i recently upgraded my g500 from windows 8 to windows to 8.1. But ever since then, my mouse does not work and the keyboard only works after standby. I tried to restore to factory defaults but that hasnt worked.
View 5 Replies
View Related
Aug 7, 2014
so basically I reinstalled windows 7 Home Premium x64 Operating System and it seems that some drivers are missing. I bought a new hard disk and 4 G of ram..I installed them and the laptop is HP Pavilion dv6-2137sl , Intel Core i5 CPU m430 , 2.27 GHz with 6 G of ram now.When I looked at the Device Manager. I saw at Other devices : Base System Device Base System Device Base System Device Network Controller Unknown device Unknown device. All have yellow triangle. I tried to install a driver, the Realtek PCIe GBE Family Controller Driver but after the installation it gives me the next message : The Realtek Network Controller was not found.If Deep Sleep Mode is enabled Please Plug the Cable.
View 3 Replies
View Related
Feb 3, 2013
I have a VGA plug in my Dell Inspiron 1545 and when I plug in the cord it doesnt work. I have another laptop and I used the same cord and it works. So I guess my VGA doesnt work, what do I have to get to replace the VGA in my laptop?
View 1 Replies
View Related
Dec 27, 2014
I just got a Lenovo Y40 and the touchpad uses the ELAN software. I already set up two finger option to open right click (pop-up menu).
View 9 Replies
View Related
Nov 13, 2013
I recently did a clean install of Windows 8.1 on my X230T, and also installed Office 2013.
I need to use the digitizer with OneNote 2013 heavily for taking lecture notes.
As I did when I was using Windows7, I set the side button on the digitizer to "eraser" and expect that it works properly.
Unfortunately, when I tried to press the button to switch the tip from the pen mode to the eraser mode, the behavior
of the digitizer becomes pretty strange.
(1) If I remain the tip close to the screen, it would not switch to the eraser mode
(2) if I move the tip a little higher and let the cursor disappear, then hold the button and move the tip back to the screen, I SOMETIMES get the eraser mode; but it doesn't switch back to the pen mode even if I release the button.
I need to again move the tip far away from the screen and release the button to get the pen mode back.
I downloaded the up-to-date driver from Wacom but it doesn't work.
Also, I cannot find the driver for this functionality for Windows 8.1 on Lenovo website;the latest version of multitouch driver only supports Windows 7 and older versions of windows.
View 1 Replies
View Related
