Dell Latitude E6410 :: Windows 7 32 Bit Drivers Are Not Documented Correctly
Nov 15, 2011
Recently began recollecting drivers needed for Latitude E6410 Win 7 32 bit fresh build, and found some descrepancies. 1 "How to Download and Install Drivers in the Correct Order" (Dated 8-14-2006) on the Latitude E6410 driver page states that for number 8 the Dell ControlPoint software Says it is located in "Applications" when itis in fact under Dell Control Point. It Suggests installing the following:
-Control Point System Manger
-Control Point Security Manager
-Control Point Connection Manager
But in fact the only 2 available are Control Point System Manager and Control Vault (A little confusing). Also, under System Utilities is the PDF E-Family How-To Reimage Guide Which is marked urgent and I use for recreating images. It states that the Driver that has to be installed (Prerequisite to other DCP ) is Dell Control Point Security Driver Pack. Which is no where to be found. I heard toady from "Ronnie" at Dell Tech services via phone that I should use Dell Data Protection (Instead of Dell Control Point) but can find nothing on the correct order or how and when to install it.
Is there anyway to get an updated Latitude E6410 Win 7 32bit Correct order (And which ones) Driver install list?
View 1 Replies
ADVERTISEMENT
Nov 28, 2014
I have a Latitude E6410. Hard Drive crashed. Bought a new HD, installed and installed Windows 7 Home Premium. Got no wireless. Looking at Device Function I see no driver for:
Broadcom USH
Network Controller
Unknown Device
What drivers do I need and where to find??
View 1 Replies
View Related
Oct 31, 2014
Latitude E6410, changed a bad HD for a new one. Installed windows 7. Besides having issues with WIFI and USB drivers, I cannot do a windows update, it shows a big red X, message I get is
" Windows Update cannot currently check for updates, because the service is not running. You many need to restart your computer"
I updated the bios, and rebooted like 15 times.
View 5 Replies
View Related
Mar 17, 2011
I have a Latitude E6410 with SD card reader. I can see the card reader in device management but the sd card will not apper as a drive in Windows 7. I tried the sd card on a colleagues laptop (exactly same spec and OS installation) and it works instantly.
View 2 Replies
View Related
Feb 15, 2013
So I just had Windows 7 reinstalled as my harddrive died. But after the reinstall, Windows 7 only detects my laptops native resolution (recommended resolution) as 1280x800.
I know this laptop has the 1440x900 display, I have coworkers with the same laptop and their display shows the "recommended" is 1440x900, and I know that was the case before I lost my drive and got a new one with a reinstall.
This laptop has the NVIDIA Quadro NVS 160M adapter, and I have the latest driver for this from NVIDIA.
Why does windows think my native resolution is 1280x800. I can use the NVIDIA driver to force it to go to 1440x900, which works. I was just wondering why it is doing this. Is there some inf package that I need from Dell?
View 1 Replies
View Related
Nov 21, 2014
I purchased a refurbished Dell e6410 about a year ago. The Laptop was working find with no issues. But in mid August, I did a windows 7 update... After the update, windows restarted... But instead of booting up to windows... It went to "startup repair". It ran this several times until is said it could not repair the startup.
I ended up having to do a recovery and reload windows and re-image my HD... After doing that, I tried windows update again. Same issue. after windows update... It would just got to startup repair.
Again, I had to restore my OS and re-image my drive. I tested and checked the HD and go no errors. Ran disk check and disk check /r... But if I tried to run a windows update it would just go into startup repair and I would eventually have to just reload my os and re-image the drive.
I spoke to an agent from Dell about it... He suggested I wait a month before trying to do the windows update. Perhaps they have a bug.
So I waited two months and tried an update again, last night. This time, I would get the dell logo, with f12 option, that would go away and then "windows is loading necessary files", but then the screen would go black and dell screen came up gain, then "windows is loading necessary files". I let it do this for almost an hour. Windows never started... I had no option to get into safe mode or any other boot modes. I have a regular desk top pc that I have done windows update and it has no issues.
I am running windows 7 64bit.
View 1 Replies
View Related
Jan 29, 2013
I am having an issue with 3 devices not being installed correctly. I am working a 32 Bit Operating system, Vista Business.
The main problem that I am noticing is that I do not have WIFI avail at the minute, but I do not know which of these devices is the issue.
They are:
Base System Device (Hardware ID)
PCIVEN_1180&DEV_0843&SUBSYS_024F1028&REV_11PCIVEN_1180&DEV_0843&SUBSYS_024F1028PCIVEN_1180
&DEV_0843&CC_088000PCIVEN_1180&DEV_0843&CC_0880
Network Controller(Hardware ID)
PCIVEN_8086&DEV_4232&SUBSYS_13218086&REV_00PCIVEN_8086&DEV_4232&SUBSYS_13218086PCIVEN_8086
&DEV_4232&CC_028000PCIVEN_8086&DEV_4232&CC_0280
Sm Bus Controller(Hardware ID)
PCIVEN_8086&DEV_2930&SUBSYS_024F1028&REV_03PCIVEN_8086&DEV_2930&SUBSYS_024F1028PCIVEN_8086
&DEV_2930&CC_0C0500PCIVEN_8086&DEV_2930&CC_0C05
View 4 Replies
View Related
May 17, 2010
My question is this - are SATA laptop optical drives the same as older IDE drives, in that they are universally compatible
with laptops, or do OEMs have drives that don't follow a standardized size and form factor now?
I found a Lite-On DVD-RW with LightScribe on eBay for like $40, but I don't want to get it if it's not going to fit.......................................................
View 5 Replies
View Related
Mar 18, 2013
Does the Latitude E6410 have a weak or a time critical signaling on the VGA port? The other day I had to replace my Latitude with a backup laptop as it was unable to drive a VGA splitter feeding three projectors. There was no problems in driving at single projector though. The other LG laptop E500 had no problems in running exactly the same presentation on all three projectors through the splitter.
The rather surprising thing was that as long as my power point presentation were display in edit mode, it worked fine whereas in show mode all of the connected projectors went blank. I tried to exercise the Fn F8 with no change.Would a VGA amplifier do the trick?
View 1 Replies
View Related
Jan 16, 2013
My Latitude E6410 Windows 7 Ultimate 64-bit machine crashed yesterday and when it came back up I was no longer able to use the touch-pad buttons below the touchpad, or the middle button above the touchpad. The pointer stick, along with the right and left button above the touchpad are still working properly.
I have tried reinstalled the ALPS driver and the Dell touchpad software.When I open the touchpad software it shows the touchpad as being enabled but it does not show any configuration for the pointer stick or buttons above the touchpad. what driver or application I need to install to get my touchpad and buttons operational again?
View 8 Replies
View Related
Dec 9, 2014
My company has offered to give to me my Latitude e6410. However, I cannot keep the hard drive. It has to be destroyed per policy. I am able to pull off recovery information and build my own image. One more concern is that the current hard drive is encrypted with Symantec Endpoint Encryption (SEE). Therefore, I do not want to simply clone the drive as I do not want no cannot use that image.
Also, if I need to reinstall my own image of Win 7 from new disks, will this e641 run 64bit. Currently the OS is WIn7 Pro.What about the recovery partition? I already have a spare 5ooGB 7200rpm 2.5" disk and i have a lot of hardware experience so I have no concerns about the actual disk replacement. It's just the image.
View 5 Replies
View Related
Jan 20, 2015
I have one device, a 3DRobotics PixHawk autopilot, which connects intermittently via USB to my E6410. All other USB devices, flash drives, cameras, wireless rcvr etc. always work fine. This one device does not. It only connects occasionally and usually does not. The failures issued by the device vary.
If I hook the device to my Asus X53U, it connects every time. The Asus is extremely slow and I really need to reliably connect to the Dell.
Note: The E6410 contains an upgrade to an i7 720QM quad processor.
View 1 Replies
View Related
Oct 14, 2010
We image all our new systems in our organizations on SCCM. I've got one that is a puzzler. I will not get an ip from the server. Instead it displays the message "PXE-E51:No DHCP or proxyDHCP offers were received." No other computer has this issue. I does not get as far as the network boot so it is not a windows deployment service issue. And it senses if the cable is disconnected, and gives you a different PXE error. I have flashed the BIOS, no sucess. I RMA'd the motherboard, and no difference. Dell won't replace the whole system since it was a replacement for another DOA. I thought it might be that little daughter card that contains the NIC connection, but cannot see that listed on the dispatch site as a seperate part.
View 2 Replies
View Related
Oct 25, 2007
when I got the 1730 from Dell, right out of the box I was getting 15,500 on 3DMark05. I installed Dell's 'new' driver on their site and it lowered to around 15,000, so I rolled back to the original 'pre-release' driver and it popped back up to the original scores (this is stock, non-overclocked, btw...when CPU is cranked to 3.4Ghz, it gets ~17,000). This was dandy, and I was very happy with the performance of pre-release drivers.
So many games didn't work with Vista, or else worked badly (i.e. crashes), that I decided to reformat and put XP on there. Well, I figured I'd put the video drivers from Dell's Reinstall CD on there, thinking these were the same 'pre-release' drivers that were allowing the better scores in Vista. BOOM: I get 10,000 in 3DMark05, a 1/3 performance decrease! Believe me, I tweaked the driver settings just like I always do...SLI is definitely 'enabled' in the driver page, but the computer performs as if it is DISABLED. So, thinking it's a driver issue, I upgrade to the 'new' drivers on Dell's Support site, and BOOM: same issue. I'm so pissed off right now, I can hardly type, as this is LOWER than my 1710. For $4000, I could have bought a lot of hookers and coke, so this laptop may be going back with extreme prejudice if a solution isn't found in the next five to seven days.
There are threads about this in other forums around the net, but none of them I've found have any real workaround or solution other than 'we'll have to wait for Dell or Nvidia to properly support SLI.' Even the 'pre-release' driver on the system when it ships is not available for download anywhere, and I believe it's Visa-only anyway. Does anyone have a solution for this problem? Hell, is anyone else HAVING this problem? I PM-ed Progneta yesterday, because I thought he had had the same issue and fixed it, but the more I thought about it, the more I figured a separate thread should be started concerning this problem, since it's pretty basic and very crippling. SOMEBODY at Dell should have caught this, since I know for a fact the engineers over there EXPECT people for format their machines when they get them (i.e. this is marketed to an enthusiast crowd, and they know it).
View 15 Replies
View Related
May 21, 2010
I'm deciding between T410 and E6410. I know the 6-cell in thinkpad doesn't protrude but does is stick out on E6410? I really do not want to ruin the dimension by using "physically" extended batteries
View 3 Replies
View Related
Oct 14, 2010
I received a e6410 laptop through ma company. XP is installed on it. My problem: the webcam is not working.
So, first I download and install the latest driver from the dell website. But there was an error during the installation.
Then I look in the device manager and no webcam is present at all. So it's seems to be an hardware problem.
So I go to the bios and look for an option to activate it but there is no option in the dell bios...
a way to have my webcam detected by the system)
View 15 Replies
View Related
Nov 13, 2014
I bought aDell Latitude E6410 laptop yesterday and every time it turns on it says no boot or something. So I push the enter button and it resets. Then when it shows the dell logo again I press F12 and go to the boot sequence and its set on cd drive and not the internal HDD. So I choose to redo that all over again and then press boot from internal HDD and it works no problem but its a lot to go through just to start a laptop. How can I figure out how to change the admin password so I can set the boot sequence right.
View 2 Replies
View Related
Oct 25, 2010
create a new Bios Screen to ours Latitude E6410.I have used a bootable CD with a splash.exe file to load a Bios Screen with the company logo and it had worked in ours Latitude D600/610/620/630 and E6400.Now when I try to do the same with our E6410 I'm getting the message " This Bios does not support splash.exe. Upgrade your system Bios and try again."
View 2 Replies
View Related
Jan 26, 2011
all I got a new E6410 and 2 docking stations around a month ago.The problem I have is that when the notebook is in my office docking station it is really really slow.I can watch while window contents are draw, switching messages inthugnerbird takes a couple of seconds.In the home dokcing station everything is fine.
View 15 Replies
View Related
Mar 20, 2013
I have a Dell Latitude E6410. I recently installed created a linux partition on my HDD but was not interested in keeping it. Anyway after I uninstalled this OS, the space allocated to it on the HDD was turned into unallocated space. I have been unable to merge it with my primary partition. What I wanted to ask was that if I perform a reinstall of my original OS(Windows 7 Professional), will I be able to recover the original partitions and how can it be done?
View 1 Replies
View Related
Nov 4, 2014
I bought a Dell Latitude E6410 with fingerprint sensor, I checked the drivers and I've the drivers for Dell ControlVault w/ fingerprint swipe sensor, and I want to use the fingerprint sensor instead of the pasword to log in in my user of the computer, but I dont know what software I need to do it, what software (Aplication) can I use for that?
View 1 Replies
View Related
Feb 2, 2015
I need to install the synaptic touchpad driver. I bought a refurbished Dell Latitude E6410 and the scrolling aspect of the mouse pad doesn't work.
View 1 Replies
View Related
Dec 22, 2012
This one currently has A07, and I know it needs to flash A09 before bumping up to the current A13, but A09 stops right after launch (".....unexpectedly quit..."). Logged in with Admin rights, not seeing any reason for BIOS failure. Another download of the A09 was tried as well.
View 6 Replies
View Related
Sep 18, 2014
I'm just reinstalled my windows to Windows 8.1 64 bit, but all drivers not working correctly. I can't find the real drivers.
View 5 Replies
View Related
May 6, 2010
I just bought an E6410 tonight, thanks to a 30% off coupon I found.
All of a sudden, however, I'm doubting my purchase - specifically because this machine uses an Alps touchpad, whereas the Vostro 3300 I was going to buy (before I found this coupon) uses a Synaptics touchpad.
The last time I had a machine with an Alps pad was in 2004 with my Latitude D600, and that thing sucked. I mean, it was an atrocious piece of hardware.
So what's the verdict on the hardware in the new E64x machines? Is it painful to use? I found a thread talking about using different OEM drivers to improve the responsiveness of the device - is this still necessary?
Just curious to see what current owners think about this. I still don't understand why Dell's been so dead-set on using Alps hardware since the D-series. My old C600 had a Synaptics trackpad, and I loved that thing.
View 8 Replies
View Related
Mar 26, 2013
I have old version A05 on my E6410 Bios. I tried to upgrade to A06, then I´d like to upgrade to A07, A09, and then to A13, because i need to have the A09 installed before install A13.I`ve downloaded all the versions, but the problem is that the Dell BIOS Flash window does not start !!!
View 9 Replies
View Related
Jul 15, 2014
This Latitude E6410 is my 4th dell laptop, (3 desktops too) so I thought I was familiar with their behaviour. Nevertheless a new issue has arisen, when idle for some time the screen goes blank, similar to my other machines. Usually I press enter, they wake up and I carry on with my work.. The E6410's screen goes blank and will not display again. All the activity is revived as I can hear the sounds my spreadsheets and accounting and tax software make, except for the screen display. A reboot is necessary.
View 1 Replies
View Related
Feb 19, 2013
I have a Latitude E6410 that I'm having problems with. On boot up it goes to a black screen with this error message: ERROR "The reader is not installed on this machine. To install reader, press any key to restart your computer and run the reader installer. If the reader is installed on this pc, please check if the reader is installed on an encrypted hard drive.....Press any button to continue".
View 4 Replies
View Related
Dec 3, 2014
I shutdown my laptop yesterday normally and today when i tried opening it it gives me a blank black screen, and then in a minute or so it makes 2 beep sounds and that's it...
things i've tried that didn't work :
1)disconnecting battery and pressing the power button for 60 seconds
2)placing a magnet on the spot where the switching lid should be
View 1 Replies
View Related
Oct 7, 2011
I bought new Dell E6410 (without windows). I installed Win XP SP3 and all drivers + Bios. When I turn off my pc and come after some time, I try to start it but not starting, The power button starts blinking!! I press many times but in vain.
I press FN + Power then it start's, Esc then restart, then it works fine ( During restart it gives one pop message at startup: before windows logo appears that its starting from default image, If I carry again the bios Update, this message will not come anymore).
I tried many Bios Versions (A09, A10, A06) and no good luck. B4 I used Dell D630 and after one month, the nvida card was defective ( I threw it out as scrap and still new laptop).
Do I have to threw this to scarp and lose my money again with Dell???
View 7 Replies
View Related
