Dell :: Perfect Case For The SXPS 16!
Dec 8, 2009I'm putting this in this forum because of the difficulty many have had finding a good case for the SXPS 16..
But I figured more SXPS 16 users would see this here .....
I'm putting this in this forum because of the difficulty many have had finding a good case for the SXPS 16..
But I figured more SXPS 16 users would see this here .....
I use to own one with my XPS M1530 too..
I didnt think the Studio XPS 16 would fit but its an actual PERFECT fit.
it's the best case on the market in my opinion. And it retails for $99.00 but I got it through amazon for $55.00 brand new. It's awesome!
So I need to order my sleeve by tomorrow night. I need to find a sleeve that perfectly fits the Dell Studio XPS 16. I dont want one that fits it big
View 10 Replies View RelatedI'm a proud new owner of a MBP 13-inch. couple of matters.
(1) A good skin/sleeve/cover/case to protect it on the go. Ideally I'd like a very lightweight and elegant skin or shell that's on all the time to protect the exterior from wear and tear, without trapping too much heat.
(2) I need a sleek padded case to carry the unit and typical accessories (charger, adapters, mouse) and other small items.
(3) I'm looking for a convenient laptop stand for my desk to set the MBP alongside an external monitor.
Would it ever be possible for Sony to make a Vaio that is close to the macbook air.
I love the macbook air but it still lacks features. With Sony's brains can't they make something which combines features from the Vaio Z and Macbook Air,
i wouldnt mind something like a thinner Z series with a backlight keyboard and better graphics with a better trackpad and better battery life
full review of studio 1640: how a perfect system ends up on ebay
View 4 Replies View RelatedThis is interesting... a friend of mine just tried to order the SXPS with the i7-820 processor and got denied by Dell. Apparently, the 1645 has been fully discontinued, and Dell will no longer be placing the i7-820 processor in any SXPS form factor. They quoted that due to hardware and power issues as the reason behind discontinuing the 1645 (and replacing it with the 1647) and killing i7-820 support. The sales rep said the only offering will be the Studio series for the i7-820.
As a 1645 owner with the i7-820, this is kinda scary that this laptop has been discontinued this quickly as well as the offering of the 820 series chip. We ended up calling a second time, and another sales rep confirmed the same story.
Anyone get similar information from Dell on this? I'm also wondering if this is a "Dell Canada" thing...
The build quality on my Studio 1535 is really, astonishingly poor. All cheap plastic and case creaks and noises. Very flimsy, even for a budget laptop.
My question is this- Would it be possible to purchase another case- a better case, perhaps and XPS or something similar,
and move the internals from the Studio to the new case? Or would that just be a logistcal nightmare not even worth attempting?
Has anyone here done an XPS m1530 case mod? I'd like to take off the front panel of my 1530 and do a custom paint job on it, but from the few sites where I've seen instructions for disassembling the 1530 it seems like a huge hassle.
If I weren't using spray paint, I suppose I wouldn't need to take it apart. But I'm new to case modding, and I haven't seen any mods done with anything other than spray paint.
What type/brand of case is everyone using to tote around their E4300. I just got mine in yesterday and I need something to protect her!
View 3 Replies View RelatedI just received an email from dell to receive 25 % off my new purchase on a system over 2.6k or an accessory. So i wanted to order a laptop case this one in paticular [url]but im not sure wether or not it will fit anyone know?
View 10 Replies View RelatedWhats your opinion on the case design? Im looking to purchase and looking at the case it looks kind of frimpy and ugly, and that ripple effect on the outside seems very cheesy!
But i've been fooled many times by pictures online vs. the look of something in person.
By contrast, the 6400 series look like they have beautifully elegant case designs with aluminum look to them.
I removed a label from the palm rest of my M6400. Unfourtunately it left behind a sticky residue. In my defense it was the "regulatory information is under the battery" sticker and I am pretty sure it is supposed to be easy to remove.
View 3 Replies View RelatedGot them off a seller on ebay for about $1.50 each $2.50 total combined postage. The 2 Vista and 1 Firefox ones on the left side were ones the seller threw in for free.
The four I ordered, Graphics by Nvidia, Nvidia - The Way Its Meant To Be Played, Intel Core 2 Duo and G.Skill Ram. The Nvidia and Intel ones were Offical badges, the G.Skill one was a custom design by the seller but looks equally professional.
Thought the palmrest looked very bare.
Decided to place them vertically with the originals. I do realise theres 2 Intel ones but I didnt want anybody thinking I only had an old Core 1 .
What do you guys use?
View 6 Replies View RelatedI just got my Dell 1720 laptop and I'm impressed, very nice.
I also purchased a Belkin laptop case for it.
Just wondering which way down into the laptop case do I put the laptop. the back of the laptop has the battery sticking out because its got the 9cell battery.
Do I put it down in the case battery side so the wieight of the laptop is on the battery or on the front side where the buttons are?
Dont want to break it.
I would like to install a backlit keyboard into my e4300.
I removed all the visible screws but the case is still intact.
Are there screws behind the rubber pieces?
Has anyone successfully disassembled the e4300 before? I wasn't able to find any documentation or photos anywhere.
I noticed recently that the area of the laptop on the left of the touchpad and the touchpad itself have been getting quite hot to the touch.
I've read the temperature survey thread, and I don't think my temperatures are that bad.
When idle, I get around 50-55 C for the cores, and 60-65C for the GPU. It's higher than that under load, (GPU/CPU can go into 70's) but as far as I understand it's not atrociously bad.
(These are SpeedFan temps).
But I am bothered that the handrest is getting so hot, I'm not sure if it used to get this hot because I use a laptopstand that has its own handrest so I rarely touch it.
Well I acquiered my Laptop last december and im noticing a few scratches, I googled for cases and covers but I didn't find anything amazing,
I've noticed people with macs that hace sweet looking covers but I haven't found any for my Dell, do you guys know any web page that sells them?
I recently bought a 14z from dell outlet. I had actually bought a 14z a few weeks ago, but was very unhappy with the 720p screen. I arranged for a return, and began looking/waiting for one with a 900p screen. I was able to find one for not much more than the first one, with all the same specs. However, it had the black chain link cover.
I knew I didn't want this cover, as I already have my Sager 9262/fingerprint magnet. I very much liked the red textured finish on my fist 14z, so I bought a refurbished red cover with my purchase.
Let me first say that I am fairly experienced in taking apart, and reassembling notebook computers. I have replaced several parts, including motherboards, and screens in several previous dell models and my Sager/Clevo D901C.
To get to the point, I took my new 14z apart, removed the screen, took that apart, and replaced the black chain link cover with the red one I purchased. I made sure to follow the service manual instructions to the letter. Everything seemed to go fine, except that now when closing my 14z, the top right corner of the screen does not come down all the way. There is an obvious gap, maybe 1/4 inch or so on the right side, while the left is completely flush.
This may be something I just have to live with, but I'm hoping maybe someone has experienced this, either on a new laptop, or after working on one, and was able to find the culprit. so far, I can't find anything that would hinder flush contact.
I have a inspiron 1440 that is my daughters and I would like to change the case top to pink.Has anyone changed that cover and does anyone know where to get a Dell cover?
View 6 Replies View RelatedWill the LCD from the 6400 fit on a 6000
View 4 Replies View RelatedI posted earlier a message about my Vostro 1500 which suddenly won't start. I called Dell and a local repair shop, and both indicate it's most likely the motherboard, and will cost anywhere from $300-$500 to fix.
Just not worth it - I'll get me a new lighter laptop instead. However, read where you can get a hard drive case to get the data off the hard drive and to use as a backup drive
I recently bought a nice Targus back pack for my new laptop, but I noticed that it will not fit due to the battery sticking out the rear about an inch...does anybody know of any aluminum cases (preferred) or nice back packs that will fit this inside it?
View 12 Replies View RelatedMy Inspiron 9400/E1705 case is getting a little banged up and I was wondering if it's possible to use a M1705 case (bezel, palmrest, base, etc). as a replacement.
View 10 Replies View RelatedMy problem is that the laptop is getting extremely hot on the left side of keyboard during any games i play, even older games. I literally cannot rest my left hand to use keyboard as it is frying it.
When i initially bought the laptop 4 months ago I could play those games and the case (keyboard area including) would stay perfectly cool. I had even played need for speed hot pursuit new with full graphics and laptop was cool.
There is a definite massive difference in case temperature between initial month or so and recently.
HW monitor program recorded temperatures of 85 degrees max for i5 processor, and around 72-78 degrees on graphics card during game play on a variety of games old and new.
Worth to mention that during other lightweight activities, such as surfing etc the laptop is cool.
Can anyone recommend me a case for soon to arrive 1545, it would be great if it could take 2 laptop, other being a Latitude D830.
View 4 Replies View RelatedDoes the Dell XPS M1330 still come with the travel remote and case extras when you purchase a new laptop?
While they're pictured in all the reviews dating to over a year ago
I have a small question. What kind of case (plastic or magnium) have a Dell Latitude E6500 with BLUE and RED colors of case?
View 4 Replies View RelatedSometimes when I startup or resume from standby I will get this horrible grinding type of sound from my fan. Someone told me that the fan in the AAO contacts part of the housing and causes this noise, but I was wondering if anyone else had this problem. I really don't want to open up my baby, but it will leave me no choice if this is a real problem (unless I can send it to Acer).
Also on a side note, AA1 Fan Control has been reading a constant 85C even though my CPU is only about 44C (according to HWMonitor). Is there a newer version of AA1 Fan Control out, or perhaps a better program? Thanks.
Fixed the AAO Fan Control. I just had to reinstall that port driver.