I have an M4300 notebook with a Quadro FX 360m as the GPU. Now, my problem is that it is automatically downclocked by about half after it reaches a temperature of 85C. I *would* be able to play Crysis (low, of course) at around 30 FPS if it weren't for this.
I thought it might be a BIOS problem; therefore, I downgraded to A02 (I had A13), but that didn't work, so I upgraded again.
I thought maybe it was the graphics drivers;
so, I installed the next lowest ones, but that didn't work either, so I re-installed the newer ones.
I want to upgrade the hard drive on my son's Precision M4300 laptop. In reading the review, I see that the Seagate ST9500420AS rates the highest, with the Western Digital Scorpios following.
I want to know if anyone has had any experience with the ST9500420AS in this particular laptop.
Seagate admits that there are issues with the ASG model in Dell machines, but claim that there are no issues with the AS model
my laptop is not booting any more. Looks like everything turns on but all I get is a black screen and two beeps. If I press some keys I get the two beeps again.
Changed the mother board battery and RAM but no results.
According to [URL] ..., Dell M4300 laptop bought several years ago might include Flash Cache Module. Dell BIOS allows to enable FCM. Is there a way to check whether the module is actually installed w/o physically opening up the laptop? What part number or name might it have in System Configuration on Dell Support web-site? It shows that the laptop was shipped with 200GB SATA HDD (part no WT611 - [URL] ...., but there are no components listed with "FCM" or "flash" in their names.
I recently got a Dell Precision M4300 from a friend and had a few questions.
When i got the laptop, I reformatted the Laptop and Reinstalled Windows XP Pro SP2. I proceeded from Microsoft to Update to SP3 and so on.
Well I also Went to Dell's Website and downloaded all the necessary drivers (using the service tag) for this laptop and installed them.
Now here is where I ran into a problem,
When I installed the NVIDIA drivers for the NVidia Quadro FX 360M video card, everything seemed to go fine. Then I rebooted the Laptop, and now every time I reboot, my hardware acceleration is defaulted back to None, and it gives me multiple pop ups about this issue. I go into the settings and turn the Acceleration back to full and it goes away.
This is a major problem, and is really frustrating to deal with everytime the laptop is booted up.
My other problem, is when I open up Internet Explorer, It tends to lock up the browser for no reason when Loading a website. I then CTRL+ALT+DEL and attempt to close iexplore.exe via the task manager. It closes the browser but does not shut down the browser, making it impossible to browse, so then I have to reboot.
here are the specs of the PC, from the device manager and drivers I have gotten
Dell Precision M4300 NVidia Quadro FX 360M 512mb Video Graphics Card TSST 8x dvd+-R burner 120GB Hard Drive 3.5GB of Ram 2.5GHZ T9300 Core 2 Duo Processor 1394 Port 2 USB ports External Monitor Ports Wifi Support Bluetooth Support Windows XP SP2 Pro
HOW TO OVER CLOCK MY HDX 16 BOTH CPU AND GPU OVERCLOCKING......THE SPECIFICATION IS AS FOLLOWS
Intel(R) Core(TM)2 Duo Processor P9550 (2.66GHz) FREE Upgrade to 4GB DDR2 System Memory (2 Dimm) from 3GB DDR2 System Memory (2 Dimm) FREE Upgrade to 320GB 5600RPM SATA Hard Drive from 250GB 7200RPM SATA Hard Drive 1GB Nvidia GeForce GT 130M 16.0" diagonal High Definition HP Ultra BrightView Infinity Display (720p) LightScribe SuperMulti 8X DVD+/-RW with Double Layer Support Webcam + Fingerprint Reader with HP Imprint Finish (Fluid) Intel Next-Gen Wireless-N Mini-card hp hybrID TV Tuner w/remote control Full SizecolouR matching Keyboard 6Cell Lithium Ion Battery No Productivity Software
I am trying to find out who the ODM ( original design manufacturer) is for these precision models, dell no longer sells them, perhaps there is another channel for buying one besides Dell???
If anyone has any information please let me know and also what model not just the ODM's name.
For example ALienware laptops are made by the ODM Clevo which also sells the same Chassis without the alienware bling and price under the name of Sager, Averatec also as I recall ....
I have a new XPS 1340, That seems to be having issues with starting up in the wee hours. Monday morning 4:30am I woke up for work, looked over at the Laptop sitting on the desk and the side hinge lights were on.opened screen and saw the login page. I always shut my computer down completely I don't use the hibernate feature.
Several Times last week I noticed when I came home from work and powered up the laptop instead of "starting Windows" it said "resuming Windows". I really don't know if this just started or has been this way since day one. I do know that the battery level always indicates 100% when I shut down and when I start up it's down to about 92% from just sitting turned off? Again I don't use hibernate I "Shut down". using windows 7.
Are their scheduled tasks that can start my machine I have noticed about 34 scheduled tasks in the scheduler can't quite undertsand why so many tasks come pre loaded. Anyway, most have never executed can I just delete them?any help, suggestions, greatly appreciated.
Spent the past 45 min trying to talk to Dell, been on hold guess lunch time is a bad idea.
Could I have a Progrram that is trying to "auto run once" ?
Can someone tell me what air adapter I need for the mini10v or where I can find out that information? I have a long 11hour flight and I need that air adapter!
I have just bought a new "Dell Slim Auto/Air/AC Adapter" . But when it's connected to my XPS M1330 it always sounds a squeaking or creaking sound if you hear it by closing your ears.
Recently i had infamous video problem on M1330, so Dell replaced the motherboard.
But after that my m1330's video is fine, but it just shut down all of sudden. sometimes it shuts down when it is booting or it shuts down after 20-30 mins of use .....
Recently bought a dell inspiron 11 and after completing the latest windows update the autorotate function does not work at all. I am still able to rotate the screen using the cntl alt arrow keys, however I miss the convenience of the auto rotate. Also the keyboard is not disable until totally being flipped into tablet position. All drivers and components show to be working in the device manager. I have looked into all of the video settings and auto rotate is not listed as n option. Again, I noticed the problem after I did the latest windows update.
If left unattended or not used for a period of several hours my Dell Inspiron N5050 automatically hibernates. How can I disable this function so the laptop remains on until I elect to hibernate or shut down?,
Additionally I receive a pop-up message about the screen resolution of my attached Dell LED monitor as being too low and urges me to upgrade the resolution to 1080. How do I upgrade?
I have an XPS M1330 and just recently it starts to make the eject noise whenever I boot up or come out of sleep mode. I don't think it's a hardware issue since I tried to install Windows 7 but went back to Vista since my drivers weren't working, and could not be installed under Windows 7. I've tried disabling the driver, deleting Upper and LowerFilters in the registry, uninstalling the driver (which actually appears to reinstall automatically after reboot or sleep), downloaded a program to disable Auto Eject, went to AutoPlay in Control Pabel and unchecked that, and uncheck it from the POST sequence by entering the BIOS setup upon bootup (The F2 Button Setup). (A diagnostics check found the drive to be running fine.) I admit, I accidentally dropped the laptop, but since I've been able to install the lastest driver, insert a disk and it successfully reads it, I've disregarded hardware as the issue. For some reason, the drive tries to eject a nonexistent disk whenever either the E:/ is clicked in My Computer, bootup, or coming from sleep. This problem doesn't occur when there's a disk in the drive, but I don't want to keep inserting a dummy disk just to cancel the noise because I think this might be some auto eject BIOS command that might have accidentally been triggered. Other than this, the drive seems to be functioning normally. Who wants to say it's a normal sound, this didn't occur before. I know the CD-ROM quickly "wakes up" upon bootup, but this is an auto eject noise.
Specs: Dell XPS M1330, MS Windows Vista Home Premium, 4GB RAM, 300 GB HDD, 2.1 GHZ Power
Recently, I have a problem with my Dell Inspiron 1420 as it's often freeze and auto shut down or restart. When it freezes, my screen will appear many small black pixels which are scattered around the desktop.
During the restart process, the system will require me to choose one of the few options available (eg. Start Windows Normally) as it stated there that the laptop was not shut down properly.
Remarks: My Dell Inspiron 1420 is equipped with NVidea 8400M GS.
I have dell Inspiron N5110. From past few days, it is auto scrolling to bottom of the page. Even if I try to scroll up its taking me down.
This problem exists even outside OS. I mean I have multiple OS installed on the system. After boot when OS selection windows opens, its always selecting last OS present in the list. System always makes some sound when this option is selected.
Regarding the keyboard. I have installed new keyboard last year under warranty.
Recently a client of mine starting experiencing WiFi connection issues, specifically the wireless will not automatically reconnect upon waking. One note: the "Wireless Network Connection" shows several routers but simply will not connect. The only solutions are either to reboot the laptop or run the connection troubleshooter in Windows. I have checked for driver updates (none available) , adjusted the power setting ("Allow the computer to turn off this device to save power" is unchecked), and verified that the AV software is not interfering - all to no avail.
I have my inspirion 17R now for 2 weeks, and when i play Grand Theft Auto San Andreas and GTAIV on it. It's gonna freeze after a while. It is not really hot. I think it's around 55~60 degrees celsius. This is without things put under the laptop. This problem is gonna piss me off for now, because also the hard drive light is on then and doesn't go out. And when i put my ear on the laptop the hard drive is not searching at all. ( it is a 1TB seagate momentus ) And i have a Core i7 and Nvidia Geforce GT630M 1GB. My dad said send it back, but i don't think that will solve the problem. Normally if i use Speedfan to put the fan on 100% the laptop will stay cool. Around 45 degrees celsius when gaming.
My computer is the dell 1747 Studio Laptop running Windows 7 Professional. It has the built-in Synaptics Touch Pad. When you drag your finger on the far right side of the pa, it auto scrolls through the document on the screen.
I use my Laptop almost exclusively with a remote desktop connection. I process large documents (some as many as 200 pages). If I accidentally drag my hand or finger up or down on the left side of the touch pad, it begins to scroll. Since it is a remote desktop connection, it will not stop scrolling until it reaches the end of the document either up or down. I have to sit and wait for it to finish scrolling before I can use the computer again.
I would like to know how to turn OFF auto scrolling on the touch pad. There is a "wheel" setting in the device setup menu but you can only turn it down to "1" not "zero".
How to disable auto brightness feature on my laptop. It's dell xps 15 with 1080p display. It happens on battery only, on every power plan. I don't mean the display dimming after a certain time, but it just goes from bright to dark. The darker the image, the darker the screen dimms and vice versa. I had another problem which was the colors going crazy when the screen went back on after unplugging charger or waking it on battery (it all went down to what was like 256 color range).
This problem was resolved after unchecking "Intel Display Power Saving Technology" in Dell Quick Set. Yet I can't get rid of the auto screen dimming which is extremely annoying. Has the laptop got an ambient light sensor or something?
I all seems like there's an ambient light sensor which is trigggered by the brightness of the screen itself and it shouldn't work like that.
some one said it may be fan problem so i had check it and found that fan is working in starting up windwos but fan will slow after that . and it is not hit too much.
Every time when the laptop goes to sleep mode by itself and I turn it on again, the touch screen will be partly unresponsive, to be more specific, it is the upper part of the screen. The problem is only at the screen, mouse and touchpad are working fine. Now I can solve the problem by pressing power button to let it sleep and press again to turn it on, but I don't want to do this everyday.
My Inspiron 13 7000 2-in-1 laptop, after having the screen and hinges replaced due to other problems (ghost touches), now won't auto rotate the screen when in tablet mode. The keyboard is also functional when the screen is pushed back past 90 degrees, so when the keyboard is on my laptop but the screen is facing me. This doesn't happen in true tablet mode however.I've tried reinstalling all of the up-to-date drivers; chipset, BIOS, along with the ST Microelectronics 3-Axis Digital Accelerometer Driver.
There are a number of issues I can highlight that stop this from working;
1) in device manager there is no entry for ST Microelectronics 3-Axis Digital Accelerometer Driver, nor Accelerometer or anything I presume makes this function work. There is a Sensors collection, but nothing in there I think is it,. There is also no 'Unknown' device listed.
2) I should see PopUp_DM.exe in the running services and in the startup selection of programs. This is nowhere to be seen.
3) I don't appear to have a "Sensors" applet
4) when I choose 'Normal Startup' in msconfig & then reboot, it goes back to the bottom option, Selective startup. Is this something I need to do via the Dell BIOS Advanced Options?
Other than doing a full restore, which I loathe to do again as already prompted by Dell previous to this issue, what can I do? A bit worried that when Dell replaced my screen they didn't refit or include the accelerometer!
I downloaded and installed the GlobeTrotter Connect in order to use 3g/HSPA on my z11wn.
I could make may lap connect to internet via the inserted sim. However, the connection only last for few mins, then drops. The only way to make it works again is turn off wwan, turn on and restart GlobeTrotter Connect, sometimes I need to restart lap aswel. this is very annoyed, because I can use mobile internet for only few mins, then must shut down and reset the WWAN adapter.
