Dell :: Quadro FX 770M With Geforce 9600 GT Drivers
Nov 5, 2008
I was wondering if it would be possible to install the drivers for the 9600 GT drivers on the FX 770M. If i'm correct the card is based on the same chip and i was curious if i'd be able to get a better game performance using those drivers.
Are there any real risks in installing the 9600 drivers?
View 10 Replies
ADVERTISEMENT
Aug 24, 2009
I just received from ebay a nvidia Quadro 770M 512MB
Quote:
[url] or[url]
as an upgrade for my HP 8510p which currently has ATi HD2600 256MB.
Both cards are MXM II (physically fit) however I'm afraid that this VGA is not on whitelist so it's not going to work - I only get blank screen, no error message, no POST, no chance of entering BIOS. I read that there is some tool that can modify BIOS - something called HP Tattoo utility however maybe it's obsolete now and has been replaced by some other utility - I can't even download it anywhere.
View 10 Replies
View Related
Sep 8, 2009
I have windows 7 ultimate 64 bit version. I have the windows 7 drivers (latest) for this but the windows rating for aero and gaming has gone down, which drivers are recommended for this card (1GB)?
View 6 Replies
View Related
Apr 25, 2010
I have a hp compaq v6000 laptop with a GeForce Go 6150. The last driver I could find for it was made in 2006. I was wondering if there was any newer drivers or some solution either official or unofficial that could make it so I can test OpenGl 3.0-3.3 dependent programs on here.
View 7 Replies
View Related
Jan 10, 2010
I just upgraded my old Windows XP to Windows 7 and guess what ... there is no drivers for my graphics card provided by SONY. On the sony web site we can find the following information:
"dear user, try Vista graphics drivers. They MAY work."- - I might say that this is really professional... so, the vista graphics drivers for my GeForce doesn`t work. I receive all the time the BSOD.
This is quite a good graphics card so I cannot understand why there is no drivers from Nvidia or Sony... any ideas? Maybe You know where can I find good drivers for my card?
-----
My laptop is Sony VGN-FE28h with NVidia GeForce Go 7400 with TurboCache supporting 256MB
View 6 Replies
View Related
Feb 21, 2010
My DV7T Quad has the 320M card in it, but when I pull up the drivers for my system on HP's website, it shows drivers only for the 230M. I assumed that perhaps the 230M drivers would install on a 320M card, however that is not the case.
Is there a reason why there is no 320M drivers on HP's website? I can't imagine NVidia releasing hardware when they have no drivers for it. Right now I'm forced to use drivers that are in the "SwSetup" folder in order to install the drivers for my card...it appears to be some type of generic NVidia driver...which is totally not cool. I called up HP about it and they confirmed there is no 320M driver but had no explanation for it.
View 5 Replies
View Related
Dec 27, 2009
i have Dell Inspiron 9300 With Nvidia Graphics card
I recently installed Windows 7 Ultimate
From Device Manager:
NVIDIA GeForce Go 6800
Driver Provider: NVIDIA
Driver Date : 3/6/2009
Driver Version : 7.15.11.7967
Digital Signer: Microsoft Windows Hardware Compatibility
On scanning from Nvidia website:
Product : NVIDIA GeForce Go 6800
Current Installed Driver : 179.67
Latest Driver Update :
The manufacturer of this system requires that you download the driver for your GPU from their support site .....
View 4 Replies
View Related
Dec 29, 2008
I recently got a Dell Precision M4300 from a friend and had a few questions.
When i got the laptop, I reformatted the Laptop and Reinstalled Windows XP Pro SP2. I proceeded from Microsoft to Update to SP3 and so on.
Well I also Went to Dell's Website and downloaded all the necessary drivers (using the service tag) for this laptop and installed them.
Now here is where I ran into a problem,
When I installed the NVIDIA drivers for the NVidia Quadro FX 360M video card, everything seemed to go fine. Then I rebooted the Laptop, and now every time I reboot, my hardware acceleration is defaulted back to None, and it gives me multiple pop ups about this issue. I go into the settings and turn the Acceleration back to full and it goes away.
This is a major problem, and is really frustrating to deal with everytime the laptop is booted up.
My other problem, is when I open up Internet Explorer, It tends to lock up the browser for no reason when Loading a website. I then CTRL+ALT+DEL and attempt to close iexplore.exe via the task manager. It closes the browser but does not shut down the browser, making it impossible to browse, so then I have to reboot.
here are the specs of the PC, from the device manager and drivers I have gotten
Dell Precision M4300
NVidia Quadro FX 360M 512mb Video Graphics Card
TSST 8x dvd+-R burner
120GB Hard Drive
3.5GB of Ram
2.5GHZ T9300 Core 2 Duo Processor
1394 Port
2 USB ports
External Monitor Ports
Wifi Support
Bluetooth Support
Windows XP SP2 Pro
View 10 Replies
View Related
Jun 6, 2009
I've been browsing online for a Vista 64bit 770M driver optimized for After Effects but I can only find 32bit or 1700M drivers instead
View 6 Replies
View Related
Sep 29, 2008
I've a question about dell lattitude and dell lattitude.
These two laptop've a different graphic chip. Which one is better for some 3d program like Sketchup, CAD, 3DSMAX. I prefer on Lattitude e6400 , It's look slim and good design. That's OK. But I've a question about a GPU in this laptop. Can it play some games?
- The Sim2
- Need for speed
- Pro Evolution Soccer
If I compare Quardo NVS160 & GFORCE 9300. Which one is better for some 3D program? Quardo NVS?
- Quardo NVS160 & Quardo FX370 - How about a diffrent?
Lattitude or Precision?
View 10 Replies
View Related
Sep 29, 2008
When will the Dell m1530 have a 9600 card instead of the 8600? I heard the 9600 will slightly outperform, as well as have better power consumption (less heat and noise is a nice bonus for me)
Also, is the hard-drive noise really that bad? Hard drive noises can sometimes drive me nuts. I'm using a HP laptop, and I dread it when the HD is constantly blurting out "brrr brr brr brrrrrrrr" noises. I get so happy when the laptop isn't making that sound while surfing the interbutts and stuff.
View 10 Replies
View Related
Feb 18, 2009
Looking at a Macbook Pro with nVidia 9600 512 or Gateway 7805u with 9800 1gig for games like Medal of Honor.
View 10 Replies
View Related
Jan 24, 2010
i have an acer 6935G and the memory installed is 4GB with DDR3 aswell as GPU which says DDR3.but since i've been browsing the forums for quite some time,i've seen people stating that acer doesn't really support DDR3 on this machines and it acts like DDR2.How can i change it to run as DDR3 than? And how am i sure it runs as DDR2 or 3?
View 10 Replies
View Related
Nov 18, 2009
I am going to be getting a refurb uMBP towards the end of the week and I am trying to decide between the 256mb and the 512mb versions of the 9600M. I will be using it mostly for surfing, blogging, programming, photoshop and gaming. Obviously the gaming is what really poses the question.
I plan to play things like WoW, Aion, L4D2, Borderlands, CoD:MW2, Batman Arkham Asylum, and the like. Obviously this will be done in windows via boot camp.
Is the 512mb absolutely necessary to play these games with decent settings or will I be fine with the 256mb as long as I have the discrete gfx (i.e. I know I wouldn't be able to play most of these on the 13" uMBP which is why I am already in the 15" category).
View 10 Replies
View Related
Jan 2, 2009
So Photoshop CS 4 is giving me corrupt graphics. It's very random, I've only come across it a couple of times.
Here's the picture: Click! (1Mb png)
Does this mean that my 9600 is faulty, since CS 4 is using my GPU?
(the only reason I linked the picture is because it's 1680x1050 and 1MB, and I didn't want to stretch the page)
View 10 Replies
View Related
Apr 2, 2010
you can see here two vaio graphic cards ..
9600M GT and GT 330M
That really surprised me that 330M doesnt support DX 11
View 10 Replies
View Related
Jan 10, 2009
What the latest Dell notebook is available nvidia quadro as its graphic card?
View 6 Replies
View Related
Mar 28, 2008
I am a fully certified DCSE for dell and I was just certifying today on the 2008 systems and noticed that the vcard instructions for the M1710 are identical to the Precision 6300.
the X800 really had 16 pipes, you can damm near oc the 7900GS' core double, amongst other surprises... It would explain why dell may have held out on this card until the dual 8800's came out for the M1730... Who would buy a 1730 w/8700's when you can get a new card for your 1710... Timing me thinks... It wouldn't hurt dell too much to release that card now since the duals are out and are obviously faster...
View 15 Replies
View Related
Nov 18, 2007
earlier this year I moved to vista , having good performance under games and a 3dmark05 score of 6500-7500.. , over the course of the year I had many reinstalls cause I wanted to check both X86 and X64 versions of Vista , and decided to stay with x64.
now I don't exactly know when exactly it happend - but a few months back I noticed my 3dmark05 score went down to 3300-3700 , well I thought .. maybe just a bad driver , so over the last 2 months i've tried many driver versions (155.xx , 156,xx , 169.xx from Laptopvideo2go and NBF) and I had the same results with all , I did fresh driver installs so thats not due to bad install or anything like it.
since I'm Currently playing WoW only :P I don't have any other benchmarks to run , Aquamark doesn't work under x64 and I don't know about any good benchmark tools.
something else I noticed which im sure is relevant - I remember that before having those problems my Temps went to the roof while gaming (93-94c) and 73c when idle , now with the new sets of drivers I have about 83c when gaming and 67c idle , now don't get me wrong .. im happy with those temps , but that also means my card doesn't stress itself to the max.
my 1st guess was Powermizer feature , Tried disabling it in the nv_disp.inf without any luck.. I'm not too sure if I managed to disable it.. GPU-Z always "sees" my clocks (500/600) at max.
I also thought about installing an old driver version but honestly I don't remember which drivers were ok to use under vista x64.
so I would really appriciate Ideas , that is before I do format C: ( I really want to avoid it this time).
Dell 1705 , 2GB Ram , T7200 , Quadro 2500m.
View 14 Replies
View Related
Mar 11, 2008
I have been out of high school for two years now and working as a waiter and I am still living with my parents. My dad told me to do something with my life or move out .
Anyway, I decided to go to ITT tech for digital entertainment and Game Design. I guess my dad was glad because he said that I could have his old XPS M1710. Well, my buddy is in school for game design and said that I have to have Quadro graphics for game design.
But, I can't find anything that says that there is such a thing as Quadro with a M1710.
My buddy has an Alienware notebook so he is no help with my Dell, but he swaers that M1710s can have the Quadro. I tried calling Dell and they said that M1710 don't come with Quadros.
Anyway, is there such a thing as Quadro M1710? If so how do I get it. Do you need a new motherboard or is a card and how much would it cost me. Right now my M1710 has a ATI x1400 video and from what I read won't help me at all in school.
View 15 Replies
View Related
Sep 3, 2009
according to this site linkhttp://www.notebookcheck.net/Mobile-...ist.844.0.html
it appears to be apart from a few minor things but basically were talking 280m power here ?
View 9 Replies
View Related
May 11, 2009
Why is a lot of people on ebay selling the m2400 with a quadro fx 380
Dell dont have the 380 on their homepage and i cant find it on nvidias homepage eiter
View 4 Replies
View Related
Apr 10, 2010
My laptop is a D630 with Windows Vista 32 which otherwise was working perfectly.
First the facts:
-Starting last week, my screen started to switch off without apparent reason requiring a hard reboot each time it happened since nothing else worked to bring it back to life.
-Then it started getting worse, one of the times I rebooted I got a split screen (two identical bad quality images one on top of the other) and the only way I managed to get out of it was to disable the nvidia driver (I had already tried to revert to the previous one and it was failing as well). Only problem with that is that playing video with the Nvidia disabled is a nightmare since the image slows down a lot and it's not synchronized with the sound.
-I tried to install the latest drivers from Dell (it seemed to be working then), and then I installed the latest ones from Nvidia and started having problems again.
-At some point during all this, my Windows lost the ability to suspend or hibernate.
-When I thought about restoring the system, it was already too late to go back to before the problem started, since all the available restoring points where more recent than that. (I know, slow reflexes on my part). I still tried to restore to when the new Dell drivers were working but the restoring failed (several times).
-Once or twice I managed to re-enable the driver and make it work for a few hours but the "screen turn off" eventually appears again.
Now the questions:
-Does anyone have a solution for this?
-Has it happened to anyone else? I searched D630 and Nvidia in the forums but all the threads I found were from 2008 and older.
-What's the next step, what should I do now?
-Would re-installing Windows be the only option, or it wouldn't help at all since I'd still have a driver problem?
View 6 Replies
View Related
Oct 2, 2008
I'm starting to get some weird video symptoms on my Latitude D830 with the Nvidia Quadro NVS140M video. Fairly random at this point, maybe once or twice a week, the screen does something weird in terms of displaying stuff that it completely shouldn't, even during boot-up.
Don't know if this chip is a member of the family of Nvidia chips that suffers from the bugs, but has anyone else experienced this with a heavily-used Latitude D830 yet?
If I have to get a new motherboard, has Nvidia actually implemented a solution, or are they still shipping the same parts? I have ~3 years of warranty left (plus the bonus year), but I don't look forward to a motherboard replacement every year or so.
View 10 Replies
View Related
Oct 2, 2009
I purchased an FX 1600M to replace my fried 7900GS. BIOS didn't recognize it. At the beginning of the boot screen I realized that the card was "engineering sample" and I couldn't install nvidia drivers by double clicking on the setup file because no compatible card recognized. I only could install them from the device manager by updating drivers and pointing out the extracted drivers folder. I use A09 BIOS and Windows XP.
Everest and gpuz say that the card is Quadro fx1600. On every speed setup ati tool showed artifacts, even with downclock!
However the card managed both 3dmark 05 and 06. Actually with good marks.
The card had 2 heatpipes but since my case needed modification I decided to change heatpipes with my old GF7900 gs. With 1 heatpipe I installed it in my Dell E1705. Can it be a heat problem that atitool showed artifacts? I also use i8kfan to check heat run and while gaming temperature went up to 84 degrees. Idle temperature was 60 degrees (corrected with gpuz). I will modify my case soon and install it with 2 heatpipes again.
Does anybody know about "engineering sample" gpu's?
View 15 Replies
View Related
Jan 13, 2008
i have an m90 t520 with 4gb ram and fx2500m,runing vista ultimate with dx10.
i try to run crysis and i cant get it to run with very high and on high it barely runs, i updated my gpu nvidia driver to 7.15.10.9808 , and still cant run it good , i tried to get a modified inf but my laptop kept on giving me the blue screen and crashes everytime i try to run crysis or even 3dmark06
if anyone can provide a working inf or a good driver with the latest inf modified installed that would be great.
and maybe an answear on why i can run the damn game on very high with dx10 even though my laptop is more then qualified to run it
dell m90 , t5200 core 2 duo,4gb ddr2 5400,nvidia quadrofx2500,wxga+ 1440.900.
View 12 Replies
View Related
Aug 27, 2009
some month ago i upgrade my bad 7900GS to a Quadro 1600M.
i have a great problem with internal monitor with a black screen.
now i use with external monitor and DVI and work
i try with a M90 monitor and work perfectly. i try my monitor with m90 and work.
what can i do? i read about flash with other bios but i don't understand.
i have to donwload bios of dell m6300? or i have to change my video driver?
probably new quadro card have different voltage.
i try also different OS: win Xp, Vista, Ubuntu, Win 7
View 15 Replies
View Related
Dec 28, 2007
I just modded my quadro fx3500m into a geforce 7950gt using the rivatuner. I did this because i thought the card would perform better while playing games. However there was no improvement and some games like NfsProstreet became slower. My 3dmark06 slipped from 5867 to 5734.Has this happened to anybody else,or did i go wrong somewhere?
View 11 Replies
View Related
Mar 6, 2009
Does anyone know why this card is RIDICULOUSLY RIDICULOUSLY and last but not least RIDICULOUSLY TERRIBLE!!??
I installed CoD5 and the graphics looked no better than my 7950gtx NOR my 128mb ATI which is about 5 years old. It even looks terrible playing Warcraft 3. Even looks bad when playing vista chess- i can see the jagged edges.
WTH GIVES?!
I might as well get a laptop geforce 6800, and it will BLOW BLOW BLOW the newer Quadro 2700m away anyday any night.
View 4 Replies
View Related
Jul 28, 2009
And OpenCL eventually? Sorry if it was asked before but my searches were unsuccessful.
I am planning a Latitude E6400 and would like this option over 4500MHD if it supports CS4 and vReveal acceleration.
View 3 Replies
View Related