Dell :: RGBLED 1080p Settings Solution Found!
Jan 24, 2010
I finally found where the hue and saturation setting are in the ATI ccc which nobody has been able to discover, including Dell who had already agreed to replace my screen because of the reds... gotta call them tomorrow to cancel. Am so happy with my screen now!
Anyway, I installed the latest ATI drivers from the AMD website and used the mobility modder to mod them so that they can be used correctly with the laptop vga card (although I'm sure that this option is in every version).
1) In the ccc switch to "Advanced" mode
2) At the top left where there's a menu titled "Graphics" with a small arrow next to it, choose "Desktops & Displays"
3) On the bottom left there should be a small picture of a laptop with the number "1" next to it. Right click on the picture of the laptop and choose "Configure"
4) It should now open a new screen. Just go to the middle tab "Avivo Color" and play around with the Hue and Saturation.
Here are my current settings:
Avivo Color:
Hue: -4
Saturation: 83
Desktop Properties (Also under the top left menu):
Set color correction for: All Channels
Gamma: 1.00
Brightness: -50
Contrast: 90
View 10 Replies
ADVERTISEMENT
May 19, 2009
I just got my new system yesterday, and the screen is mighty bright, with very bright and detailed colors, which seem fake and cartoonish...
It's a beautiful screen, just bright... The colors seem like they are highlighted, and not natural.
Who has the correct setting for this monitor?
View 10 Replies
View Related
Dec 5, 2009
Please post only setting of your screen settings, just having problems finding the right colors.
View 3 Replies
View Related
Oct 16, 2009
Just wanted to share my personal opinion and experience in comparing the SXPS 16's RGBLED LCD to the newer, less expensive 15.6" Full HD (FHD) LED backlit 1080p display.
Having used the RGBLED for many months, I was never too happy with the "look" of the display. It looked too warm (maybe too yellowish?). Hard to put my finger on it, but in my work, I see LOTS of new desktop LCD monitors and LOTS of new notebooks, and the RGBLED did not have bright, white, whites. Comparing the RGBLED to my HP 24" LCD on my desktop, side-by-side, it was obvious the RGBLED was not pure white. Color corrections, etc., could make it better, but not to my satisfaction. Also, small text looked multi-colored, not black.
Having recently received a SXPS 16 with a 1080p Full HD LED backlit display, and moving my SSD drive to the new SXPS 16 so everything would be identical, I can say that the FHD display is PERFECT! Bright, white, whites (finally), and small text is sharp and black. I cannot really notice that it is 0.4" smaller, so that does not bother me.
For me, the cheaper FHD 1080p display is a better display than the more expensive RGBLED. I wanted to share my opinion for those that are wondering which they should order. If you already have an RGBLED, maybe you could comment on your experience with your RGBLED? But, I believe if you order the FHD display and save a bunch of $$$, you will be perfectly happy!
View 10 Replies
View Related
Apr 16, 2009
someone asked if they had a temp monitoring solution for the studio 1737 as i8kfan doesnt work...
View 5 Replies
View Related
Nov 3, 2009
yesterday I received my XPS 16. Nice machine, BUT: the cracking speakers / subwoofer is hard to accept.
I mainly listen to trance / techno music and the cracking noise is just there. Is there any patch or whatsoever? It's horrible ;/
View 10 Replies
View Related
Aug 13, 2009
I am currently using a HP dv2000t notebook and the entire lid is glossy and very prone to fingerprints. I am awaiting for my XPS 16 to arrive but I've read many reviews about this laptop being a "fingerprint magnet" as well.
So just in case you guys didn't know, there is a way to help treat the fingerprints on the laptop's surface / lid.
NOTE: This is by no means permanently guaranteeing no future fingerprints.
..but for those that are interested, what I do is I take car wax and I wax the glossy surface like I would wax a car's clear coat.
Personally I use Meguires NXT car wax (paste kind, not liquid wax) but any other car wax works as well .....
View 4 Replies
View Related
Oct 31, 2008
i was having this wierd behavior of my laptop where battery woudnt charge above 6%, ive tried most of the "solutions" on the web, but none of them worked.
-Desinstalling Microsoft's ACPI-Compliant control method battery
-Doing a vista clean install
-Restarting/Removing/Plugging the battery from the laptop with the system running and shut down, and all sorts of combinations between.
-Trying different AC (from dell, some of my friends have got some dell systems, i tried a m1330 AC)
-Tried to find a battery calibrator, but was unsuccesful, and even tried to downgrade my BIOS, but couldnt because my battery wasnt charged above 10% (thats a requisite to flash the BIOS)
NONE OF THOSE WORKED.
So i called dell, they told me to go to the BIOS, tech guys told me that the problem could be figured out there by 2 ways, it'd either:
-Recognize the AC adapter (in due case, it was a battery problem)
-Or it wouldnt recognize it (in which case, it would be a MoBo or a AC adapter problem.
Turned out it recognized the AC adapter, so next step was to send me a new battery, since i had a 6 cell battery (which the dell guy confirmed after i gave him the serial number of the battery) i expected to receive a 6 cell battery replacement, but no, lucky me i received a 9 CELL BATTERY INSTEAD, free within warranty period (system is only 7 months old) so yeah, im happy, and my battery is charging again.
Everything is fine, so i thought i would share this info for you guys.
One thing to get in consideration: The embedded battery health indicator might not indicate that the battery is healthy, since my faulty battery had 5/5 green lights when i tried to check the health but was still faulty (my new one has 5/5 health lights and works wonderful)
View 10 Replies
View Related
Dec 30, 2008
my problem specifically was that beer got spilled on the keyboard. after a while the machine shorted and shut off. I have a Dell Inspiron 9300, with a 1.73 ghz Sonoma CPU. i left the laptop off for two days so some of the liquid would dry out. after some problems and a dozen reboots i got into the bios, then finally through to windows.
everything was fine except that the CPU was working at a very low frequency. also the fans were continually at highest speed. the CPU was being reported between 101 mhz to 503 mhz, depending on the software. it was being recognized correctly but showing to operate at 202 mhz in the system properties panel. what was really striking is that the notebook harware software i had installed was reporting the CPU temperature as 85 C. I tried various software to manipulate the CPU frequency to no avail. The temp was a constant 85 C, although i could tell that it was not even close to this temperature since i my laptop was partly disassembled and i could feel the surface of the heatsink with my hand; it was cool.
I finally surmised that the problem was with the thermal sensor on the motherboard. it had probably shorted or got soaked and was reporting the highest temperature it could as a safety measure, thereby limiting the CPU to a very low frequency and not allowing it to throttle above 503 mhz.
My last option, save for replacing the motherboard, was to find the sensor chip, clean it, dry it and hope that it would work again.
But this is not what solved the problem. somewhere on the net i came accross a code, that when entered on an Inspiron 9100 (an older laptop, with a different chipset) would bring up the Thermal Management screen or something like that, which is certainly not accessible via the BIOS. I was playing around with the settings on a program called Hardware sensors monitor, again to no avail, when i finally decided to enter this code:
FN key + zxcvasdqwer. almost the second i pressed z, or maybe after x, the high speed fans shut off! after a short while they kicked back into operation but at a low speed, just like they were supposed to. the program hmonitor began reporting a more realistic CPU temp. i tried to play a high-def movie file and finally it played normal, without any lag or stuttering! as i played it, the fans kicked into higher mode, and the temp which had been steadily rising, began to drop. the program, and most other programs were still reporting the cpu at 202 mhz, windows system properties as well. but since it was playing a 720p video file normally, it had to be much higher than that. i did a reboot and voila!
all monitoring software are now reporting the CPU at 1.73 ghz. the system temperatures are perfectly normal, and at idle the CPU goes as low as 20 degrees C. The software Speedfan, however, is still giving an error regarding the sensor chip on the motherboard.
View 11 Replies
View Related
Dec 25, 2008
Nvidia apparently has a solution to the problems faced by many in their notebooks powered by GeForce 8M series, that is, to encourage the OEM/ODMs to buy their new problem free chips. Of course, this doesn't solve the issues faced by current users and there won't be any replacement for them.
Nvidia has come out with a new GPU called NB8E-SET which is essentially NB8E-SE with the new underfill. NB8E-SE is used on many notebooks most commonly advertised as GeForce 8700M GT, GeForce 8800M GS or GeForce 9650M GS. NB8E-SET (G84-751) uses the new Hitachi underfill and is clocked at 625MHz core and 128-bit 800MHz GDDR2/3 memories similar to the current NB8E-SE.
Here's a note from Nvidia to their partners :
NVIDIA is committed to providing our customers with quality products that push the edge of technology and also continuously improve product quality and reliability. To help improve the product quality and ensure smooth and uninterrupted product supply during the current “end stage” of life cycle, NVIDIA strongly recommends that customers transition to this latest revision of the NB8E-SET GPUs as soon as possible. These latest revision units utilize “Hitachi” underfill packaging material that improves product quality and enhances operating life by improved thermal cycling reliability.
Source: [url]
View 10 Replies
View Related
Nov 12, 2009
Some suggested using spyder3
Some said it was a result of the ccfl
Some said that the ATI card didn't have that issue
So after updating all the nvidia drivers and bios I still had the grainy...and blotchy picture. It wasn't as bad on animated movies but regular films still had the blotchiness.
The replacement 6400 had 4 gigs of ram . XP 32 bit. The ccfl screen. We've contacted Dell about this issue, but the tech I talked to said that unless there was a "technical" issue he couldn't help and for me to call customer care if I didn't like it.
I realize a lot of you use the 6400 and I didn't know whether to send this back or if there was an answer/solution to the off color (yellow/green).
View 6 Replies
View Related
Mar 7, 2010
Solution to the crackling noise from the speakers.
Right click on the ‘speaker / headphones tab (located in your tray)
Select sound
Box Opens.
Click on playback tab
Right click on the speaker / headphones
Properties
Box Opens.
Advance
Default format needs to be changed to 24bit 192000hz studio quality.
Done problem solved blast your tunes all day long without that annoying sound.
View 10 Replies
View Related
Feb 7, 2009
I'm getting the same thing -- artifacts during bootup, drivers won't initialize properly, safe mode works in VGA mode but there are patterns throughout.
I also went into Dell diagnostics and in the second diagnostic program (not the initial one that comes up, but the second one you actually interact with after exiting the first one) it will actually check the memory of the video card, contrary to what I've read around here ......
View 11 Replies
View Related
Oct 20, 2009
Like you from the first day I had my hands on my Dell Studio 1535 I have the problem with sensitive buttons, eject the cd light stays lit,
the light stays lit lower volume and not permitted me to walk up or down the volume or when the team suspended him again and I fastened to light one of those lights, etc etc.
I changed the panel of sensitive buttons 2 times, thinking the problem was that but never fix the problem .....
View 6 Replies
View Related
Mar 20, 2010
I've seen many posts from people who want to use a traditional 2.5" HDD in their new Z11 laptops instead of the DVD/BR drive. I have a working solution.
I picked up a Lenovo Ultrabay III adapter for a W510 I had on order and subsequently canceled after 2 months of delays in shipping.
The DVD drive is attached via a micro-SATA connector. If you haven't seen one before, here's a comparison to a regular SATA connector .....
View 10 Replies
View Related
Nov 3, 2008
I got myself 5930G a week ago.
I removed all of the unnecessary programs that Acer put in (they do make decent laptops but really overbload the OS with stupidities) and optimized Vista as much as I could (which is working nicely if i do say so myself ... but I'm still considering on going back to XP SP3 until Windows 7 comes out.).
Right ... I also played Mass Effect for a while on the laptop (maxed out at native res of 1280x800 works without a problem).
Now the only thing is, I'd like to reduce the temperatures of the laptop.
The idle CPU temp is at about 52 degrees, while under load reaches about 72 degrees Celsius (which is pretty good considering the casing).
I will buy myself the ZALMAN ZM-NC2000B cooler ... but what I would also love to do is to undervolt both the CPU and the GPU.
I'm aware the RMClock is not exactly effective when it comes to P7350 cpu.
I tried to undervolt it last night, and as much as I reduced the current going to the multipliers, the temperatures remained the same under stress for prolonged periods of time.
So ... until I find a way to undervolt the cpu and get myself the forementioned cooler, I'd like to undervolt the gpu (9600m GT GDDR3)
If it's possible (and I know it is), I need to know of programs that can be used to acomplish this.
As much as I like my new laptop, it would be nice to further extend it's lifespan (even though it's brand new) and reduce the heat output.
I was also thinking on getting the thermal paste and applying it to cpu/gpu.
Although I'm not sure I want to go ahead with it as I don't want to void the warranty.
how to overclock the cpu/gpu in question without significant gains in temps.
View 10 Replies
View Related
Apr 17, 2009
i hate dell's dcp. not very useful, security is pain in the butt. pre-requsite microsoft framework, and etc.
I am wondering if there is a program that can handle dell's battery management, with charge threshold setting.
View 3 Replies
View Related
Jul 26, 2009
I was running an FW and noticing huge percentage drop when I would hibernate and leave it unplugged overnight, sometimes it would be about 30%. However the percentage would always remain 30% lower then when I powered it down for a while so I figured my battery life was not affected overall and that the battery indicator was wrong. Well it turns out that I was wrong, I can usually squeeze out 2 min per percentage if I leave my computer idle and allow the screen saver to popup while on battery. However after the 30% drain overnight I noticed my overall battery life was affected severely, with 1 overnight on hibernate session my battery life went from on average 2 min per percentage to 1.33 min per percentage.
Possible Solution:
Turn on battery care function on the Vaio Control Center and set the custom setting at 100%. Having done this my battery during hibernate (and shutdown) overnight drops only 1-2%.
View 10 Replies
View Related
May 27, 2010
I was looking on ebay for accessories for my new Z and came across these drives. Would these work as direct replacements for our DVD drives?
NEW Blu-Ray Drive for HP laptops - eBay (item 170491173520 end time Jun-24-10 18:54:19 PDT)
View 10 Replies
View Related
Oct 6, 2009
After trying for months to make my DigitalPersona to work with Firefox 3.5, I read on their website that the solution for HP users is "HP Personal" 4.1. I asked HP Support about it and here it is the solution...for now:
HP Customer Care [url]
I understand that you would like to know whether Digital Persona 4.1 is released for your HP HDX X18-1103EA Premium Notebook PC which supports Firefox 3.5.
I understand your concern in this regards and assure you of my best effort in resolving this issue to your satisfaction.
*****, to use the Digital Persona Software with Firefox 3.5, please download and install the latest Digital Persona Fingerprint Reader software, version 4.0.1.3749 (SP4883 for 64-bit notebooks). The download link is give below.
Digital Persona Fingerprint Reader Software (Version: 4.0.1.3749_64 A)....
View 8 Replies
View Related
May 26, 2009
I bought a DV2000 with a failed motherboard. I tried reflowing it once and it didnt work. I will more than likely be replacing the mobo after I try reflowing once more.
It currently has a gforce 6150 igp with an athlon tk53. I am wanting to get a mobo with the best graphix solution possible. So far, the best I have found is a gforce 7150 board. I know there are intel setups with gforce 8200 but I would prefer to stick with amd, although an intel board is not completely out of the question.
So, if you know what the best graphix solution is, let me know! Post up the exact model number so that I can get a mobo part number. Or, just post what you got if its better than a 7150 gforce!
View 5 Replies
View Related
Jan 5, 2009
I have recently purchased a Dell Studio 14 laptop with Western Digital WD3200BEVT 320 GB 5400 rpm HDD. I installed Ubuntu Intrepid Ibex 8.10 immediately after purchasing it.
I am aware of the Load_cycle_count issue and would like to fix it. But with so many threads on the topic available on the net, I am a bit confused.
Has anyone applied the fix on the Studio Laptop with the above HDD yet? If yes, can anyone please share their experiences/caveats etc. so that I can confidently go ahead and apply the fix .....
View 3 Replies
View Related
May 9, 2009
Does time machine function as a complete backup solution?
Does it backup every file?
View 10 Replies
View Related
Feb 27, 2009
I recieved my studio 16 2 days back and so far its been treating me well. I got the deal in Canada for a whopping 1350 .
It has the standard features that are found on most dell studio xps 16's here on the forum. I wanted to get some advice from you guys. You see I went with the native WLED 1366X768p screen and I am not too happy with it. When I was customizing the system I didn't see a point in spending 300 additional bucks on the higher end screen. However now I am thinking of getting the 1090p resolution LCD. How has the experience been for people that have the RBGLED? Is there a way to get it at a lower price? and is there a way to get higher display resolution on this current screen? perhaps through a different GPU? I am just considering my options here since I really do like this laptop everything is fine. I guess I'm just looking for a more crisp resolution and the price is too high
View 10 Replies
View Related
Sep 13, 2009
I ordered my XPS 1640 on the 5th, it is due to be delivered to me on the 23rd. I was looking over my order and found this a bit confusing:
1 320-0997 Premium FHD WLED Display Obsidian Black, 2.0 MP Webcam
View 7 Replies
View Related
Nov 5, 2009
What is/are the part number(s) for the 16" 1080p RGBLED screen? My Dell order keeps getting some 1080p 15.6" WLED screen ... I'd like to use the part # and get the manager to fix it quickly. Also what is the part # for Bluetooth?
View 9 Replies
View Related
May 30, 2010
Does anyone know if the Dell XPS 16 will be getting its RGBLED screen back? I find it kind of strange that they took it out after they introduced the ATI 5730.
View 10 Replies
View Related
Aug 13, 2009
RGBLED vs WLED, both 1920x1080. I already ordered my sxps16 on 8-4-09, I went with the WLED, I bought it when it was 25% off select laptops, couldn't pick RGBLED at that time.
I have been racking my brain about this, tried to cancel but it was to late. Should be here soon, ten days since order and still not shipped. I HATE WAITING! They told me after I recieved the laptop I could return it.
View 3 Replies
View Related
Aug 23, 2009
I just orderet an Dell XPS 16 with a WLED 1080P screen and i should have it on the 25. of August.
Then yesterday i went to dell's side and now they offer the same laptop at same price but with the RGBLED screen instead.
It seems its a new RGBLED screen as its not 16" but 15,6" as the WLED screen.
I dunno what to do. Would you guys return the laptop and order a new one with the RGBLED instead?
View 10 Replies
View Related
Feb 28, 2010
When I go on the Dell website (both Canadian and American, although I am in Canada) and I customize one of these laptops with the rgbLED display, as soon as I switch the system colour to any other colour than the default black the rgbLED switches to a WLED, but the cost stays the same.
Is this a glitch, when it says WLED does it actually mean rgbLED? (or else why does it still cost the same) I was curious because I was definitely getting interested in the rgbLED, but I would much rather have the laptop in white.
View 7 Replies
View Related
