I noticed its not an option anymore through Dell. Maybe I'm not just looking hard enough, did they get rid of it. The best option now is Edge-to-Edge FHD Widescreen 15.6 inch WLED LCD (1920x1080) W/2.0 MP?
It seems Dell does not have any RGBLED screens available for the XPS 16. What are the biggest advantage of the RGBLED instead of the other options Dell offers? Should I wait for the RGBLED? I'm not going to do any high-end photo or video editing, and I've heard that's one good reason to have that screen.
Just curious if anyone else is having this problem/glitch when I unplug the laptop from AC power and the screen brightness is turned up about more than 1 tick the screen turns really red and dark but then brightens up a second later.
It seems odd that it turns mostly red and then back up to normal in a second
There is some screen behavior that has me a bit confused though and I'm hoping someone here might have thoughts or advice about it.
Every now and again, the screen gets just a bit dimmer for just a very brief moment, not much, just a bit, and pretty quickly, and then comes back to normal. It almost looks like it wants to go into it's "power saving" mode or something, for a moment, and then back out .....
I just bought a Dell Studio XPS 16 second hand, advertised with an RGBLED screen.
The laptop works great but I am very sceptical about this display, all the reviews harp on about how amazing it looks but I can't really see much of a difference between this screen and my WLED monitor.
but I can confirm just now that I took the plastic cover off b/c I could not stand the glare anymore, and it's a very nice matte screen underneath!
Now I am going to follow the other bold gentleman and cut out that clear plastic, leaving myself with an antiglare xps 1640!
The plastic is actually 1 mm thick as the xps1340 poster (livincali) stated. I was worried that for some reason the xps 16 would be slightly differently built than the xps 13, but it's not with regards to the screen.
I am confident that the plastic can be cut out with an exacto knife, if not just a pair of scissors. I do not have any sandpaper .....
I recieved my studio 16 2 days back and so far its been treating me well. I got the deal in Canada for a whopping 1350 .
It has the standard features that are found on most dell studio xps 16's here on the forum. I wanted to get some advice from you guys. You see I went with the native WLED 1366X768p screen and I am not too happy with it. When I was customizing the system I didn't see a point in spending 300 additional bucks on the higher end screen. However now I am thinking of getting the 1090p resolution LCD. How has the experience been for people that have the RBGLED? Is there a way to get it at a lower price? and is there a way to get higher display resolution on this current screen? perhaps through a different GPU? I am just considering my options here since I really do like this laptop everything is fine. I guess I'm just looking for a more crisp resolution and the price is too high
What is/are the part number(s) for the 16" 1080p RGBLED screen? My Dell order keeps getting some 1080p 15.6" WLED screen ... I'd like to use the part # and get the manager to fix it quickly. Also what is the part # for Bluetooth?
Does anyone know if the Dell XPS 16 will be getting its RGBLED screen back? I find it kind of strange that they took it out after they introduced the ATI 5730.
RGBLED vs WLED, both 1920x1080. I already ordered my sxps16 on 8-4-09, I went with the WLED, I bought it when it was 25% off select laptops, couldn't pick RGBLED at that time.
I have been racking my brain about this, tried to cancel but it was to late. Should be here soon, ten days since order and still not shipped. I HATE WAITING! They told me after I recieved the laptop I could return it.
I just orderet an Dell XPS 16 with a WLED 1080P screen and i should have it on the 25. of August.
Then yesterday i went to dell's side and now they offer the same laptop at same price but with the RGBLED screen instead.
It seems its a new RGBLED screen as its not 16" but 15,6" as the WLED screen. I dunno what to do. Would you guys return the laptop and order a new one with the RGBLED instead?
When I go on the Dell website (both Canadian and American, although I am in Canada) and I customize one of these laptops with the rgbLED display, as soon as I switch the system colour to any other colour than the default black the rgbLED switches to a WLED, but the cost stays the same.
Is this a glitch, when it says WLED does it actually mean rgbLED? (or else why does it still cost the same) I was curious because I was definitely getting interested in the rgbLED, but I would much rather have the laptop in white.
I'm looking for a glossy, bright, rich color screen that has really, really deep blacks. There were some comments in the RGBLED settings thread that the blacks don't get very black on this screen. Is that true?
Would a white LED screen have better blacks? I don't care about photo work, I just want the best looking screen for games and movies.
Anyone else with this laptop find that the screen has a very warm-reddish white balance, or is it just me? Compared to my MBP and other Dell laptops and screens, it has by far the most reddish whites.
I've tried the many ICM profiles posted here, and it definately made a difference. I'm now getting much more accurate colors, but the white balance itself remains quite reddish.
To make matters worse, the ATI CCC which, on my desktop computer, gives me White Temperature controls, those same controls are non-existant on the 1640 (same Catalyst 9.9 drivers).
my order is being messed up with a 15.6" WLED 1080p screen, but I asked for a 16" RGBLED 1080p screen. I read on here that sometimes Dell installs an RGBLED even though it says WLED. How would an end user tell the difference, apart from "colour", which is subjective? Like is there a way to show it in something such as Device Manager or is there a way to look at your part somehow? I'd rather not rip my screen apart, but if it's not RGBLED then Dell is going to have to send a tech and the right screen.
So I recieved my laptop yesterday and opened it up today. I got everything set up and messed around, yet had to go out for a little while. I left it off power yet when I went to start it up the screen didn't come on! The side light is constantly white when plugged in, and an external monitor works perfectly fine. Is there anything I can do to troubleshoot this issue? I there any button I could have pressed to cause this problem? Or is a call with dell my only answer?
*UPDATE* Issue resolved by buckZor: Shutdown gracefully, disconnect power. Remove battery. Wait 3 minutes. Plug battery back in & power, open and boot. Display light up?
My 1647 came in yesterday. I was pumped to finally have it.
As soon as I pulled up IE I noticed a very distinct yellow tint to every color displayed on the screen. This is very annoying and I'm not getting used to it at all. The difference between this display and my Mac Book Pro is unbelievable. The colors on the MacBook are better in every way. I'm very disappointed in the display. I had hoped it was going to blow me away, but instead I'm very underwhelmed.
Has anyone else noticed this on their RGBLED display? I've seen it mentioned on other models on this forum, but no mention on other 1645/1647's.
Has anybody ordered the RGBLED display and received the WLED one instead? I ordered the RBGLED (as shown on my receipt and Dell confirmation email) but my shipping confirmation says WLED. I am on the phone with them now, but they are only seeing WLED now (since that's what it's now showing for them). If you had this issue, how did you get it resolved?
So I've been following the RGBLED calibration thread and don't think i've found my answer through all the ICC profiles and whatnot.
I've had a Studio XPS 1640 which i exchanged for a 1645. The 1640's screen was showing up as way too saturated with blue causing everything to have very cool overtones. I had that screen replaced only to see the same issue.
Upon receiving my new 1645 I've noticed the same thing. The screen (although slightly to a lesser extent) is still pushing way to cool a picture. None of the ICC profiles have helped other than to push too much green as a result of the change.
My question is should I consider this to be an issue and request a replacement screen. Is there anyone out there who doesn't have an over saturation of the RGB colors in their display? I've seen people complain about too much reds and some with too much green. Also the display going to 1 of the 3 colors entirely. (I have not experience this)
I'm comparing this to my Dell Dimension 2200 Monitor which although is not RGB LED i would assume color accuracy would be near to (although more vibrant) as my samsung 245BW LCD.
Things I've tried. (all of the ICC Profiles provided in the display thread, Windows 7 Color calibration and finally ATI's Color control system in the CCC.