Dell :: Xps 1640 RGBLED Screen Is Actually Matte/antiglare Underneath!
Apr 27, 2010
but I can confirm just now that I took the plastic cover off b/c I could not stand the glare anymore, and it's a very nice matte screen underneath!
Now I am going to follow the other bold gentleman and cut out that clear plastic, leaving myself with an antiglare xps 1640!
The plastic is actually 1 mm thick as the xps1340 poster (livincali) stated. I was worried that for some reason the xps 16 would be slightly differently built than the xps 13, but it's not with regards to the screen.
I am confident that the plastic can be cut out with an exacto knife, if not just a pair of scissors.
I do not have any sandpaper .....
Dell is finally starting to help me out as far as the screen glossiness and some other issues I've been having.
Before I tell them what parts I need in a replacement, I need to know if the M6400 RGBLED screen (not the Covet) is matte finish?
I'd really appreciate it - I can't trust their sales staff to actually know. My gut instinct would be that the E2E RGBLED screen is glossy, while the other is matte... but I don't want to replace my glossy with another glossy!
Anyone else with this laptop find that the screen has a very warm-reddish white balance, or is it just me? Compared to my MBP and other Dell laptops and screens, it has by far the most reddish whites.
I've tried the many ICM profiles posted here, and it definately made a difference. I'm now getting much more accurate colors, but the white balance itself remains quite reddish.
To make matters worse, the ATI CCC which, on my desktop computer, gives me White Temperature controls, those same controls are non-existant on the 1640 (same Catalyst 9.9 drivers).
I've just ordered M6400 with an Anit-glare RGB LED screen.
Could You give me a hint how to check that I recived correct version. (I chosed this screen as it was recommended by many people and never saw it on my own eyes)
I am considering some laptops and the sony vaio is one of them. I have heard great things about the screen but it is glossy, something I have sworn off all these years. I have seeing reflections on my screen. how the anti-reflective screen performs?
Do all Dell E5400 have a matte screen? I want a matte one not glossy. Also when I choose LED screen for my custom E5400 it would not let me. And in general how is this laptop for basic use?
which Sony model apart from the X11 Netbook has a matte screen, as in anti-glare screen. Also I need to be able to see what's on the screen so for 13 inch a basic resolution. Am I right in assuming there is a Vaio Z series with a matte screen? I am very sensitive to glossy and some LED screens.. I hope Sony's LED is a good one.
Are matte screens available on any Pavillion systems? I've searched and searched, but they pretty much all seem to be 'brightview' or 'infinity brightview', which are glossy, right?
I don't want to start this whole 'matte vs. glossy' debate again, but needless to say I work in a bright office and my DV4T's reflections are killing me
So far I've found the business Elitebooks look nice and have matte screens, but they're a tad behind, say, the HDX systems in terms of the available configurations.
The thing they call "edge to edge glass" which is really just plastic above an ordinary screen. The thing is, that the screen under that edge to edge plastic is a nice anti-glare screen, no kidding! You can see this if you take your laptop in sunlight and tilt it the right way.
So what's happening is you're getting the worst part of an anti-glare screen (reduced contrast ratio) plus the worst part of a glossy screen (unless you have a really pretty face).
I took the plastic thing off, cut along the black/clear border, pulled out the middle, and stuck the centerless border back on the laptop.
Result? THIS SCREEN IS FANTASTIC. Yeah ok, of course I would say that. But if you knew me, you'd know that was way out of the ordinary and really meant that THIS SCREEN IS FANTASTIC.
One thing you may not have considered is that the screen in its default position has yet another flaw, both sides of that glossy plastic thing are glossy, so some of the light coming from the screen is reflected back to the screen, and as you know light reflected onto the screen has a yellowish tint. That is my guess as to why the whites on this screen are really really white now, and the screen is much brighter. This also explains why other 300nit screens used to look so much brighter than this.
I will have more pics when I am able to charge the battery to my good camera. If anyone has any questions about removing that plastic thing I'll be happy to answer your questions, it's actually pretty easy. For those interested, here is how I did it:
1. I removed the "star" head screws, this was accomplished not with a special star head screw driver, but an ordinary flat head precision screw driver.
2. Put some paper over a hacksaw blade to avoid scratching, wedged it under the plastic near the top where the camera is, and snapped out the first of the several lock-in points on along the top edge. I proceeded to detatch the rest of the top of the screen in this way.
3. Both the left and right sides were held on mostly by adhesive, the very edge point locks in slightly, but the efforts removing these sides are focused mainly on separating the adhesive bond.
4. I pulled upward on the plastic and it came right off, there seems to be no adhesive or lock-in points on the bottom side.
5. Using the center of the screen as a test area, I tested several cutting utilities and decided on the utility knife. To my surprise, the plastic was about 1mm thick.
6. I clamped the screen down to the table, with a straight edge positioned 1mm inward of the black line, to give headroom for errors.
7. I cut along these lines, and repeated step 6 for each side, and pushed out the center to reveal the border piece that now resembled a common laptop screen enclosure border.
8. I used a medium grit sand paper to bring the cut lines to meet the black lines, and finished it off with a fine grit sand paper.
9. I applied some electrical tape to the area between the edge of the screen itself, and the edge of the laptop on the right and left sides because there was light leakage, and then popped the border back on and screwed it down.
Found the charger! Here's the high res shots. They do *some* justice to the screen quality.
I went insane and cut along the black-to-clear border of the m1340 screen thing. The thing they call "edge to edge glass" which is really just plastic above an ordinary screen.
The thing is, that the screen under that edge to edge plastic is a nice anti-glare screen, no kidding! You can see this if you take your laptop in sunlight and tilt it the right way.
So what's happening is you're getting the worst part of an anti-glare screen (reduced contrast ratio) plus the worst part of a glossy screen (unless you have a really pretty face).
I took the plastic thing off, cut along the black/clear border, pulled out the middle, and stuck the centerless border back on the laptop.
It seems Dell does not have any RGBLED screens available for the XPS 16. What are the biggest advantage of the RGBLED instead of the other options Dell offers? Should I wait for the RGBLED? I'm not going to do any high-end photo or video editing, and I've heard that's one good reason to have that screen.
I noticed its not an option anymore through Dell. Maybe I'm not just looking hard enough, did they get rid of it. The best option now is Edge-to-Edge FHD Widescreen 15.6 inch WLED LCD (1920x1080) W/2.0 MP?
Just curious if anyone else is having this problem/glitch when I unplug the laptop from AC power and the screen brightness is turned up about more than 1 tick the screen turns really red and dark but then brightens up a second later.
It seems odd that it turns mostly red and then back up to normal in a second
There is some screen behavior that has me a bit confused though and I'm hoping someone here might have thoughts or advice about it.
Every now and again, the screen gets just a bit dimmer for just a very brief moment, not much, just a bit, and pretty quickly, and then comes back to normal. It almost looks like it wants to go into it's "power saving" mode or something, for a moment, and then back out .....
I just bought a Dell Studio XPS 16 second hand, advertised with an RGBLED screen.
The laptop works great but I am very sceptical about this display, all the reviews harp on about how amazing it looks but I can't really see much of a difference between this screen and my WLED monitor.
What are your thoughts about the shiny (almost mirror like) high gloss screen types? Do people actually like it?
I think it�s terrible, I can see myself in the screen and all of the lights around me. They are supposed to reduce glare and all but in my opinion it creates it.
I'm comparing this to what I prefer using � standard TFT displays.
The anti-glare is quite refreshing, actually, and reminds me of my 2007 MacBook Pro...
Anyway, it's blazing fast, and with a fresh OS X install on her OCZ Vertex SSD, she's up and running and very happy. She's MORE than glad to be rid of the utterly awful 1440x900 resolution, and up to 1680x1050 (though she'd still prefer 1920x1200...).
It seems a very speedy upgrade from her 2008 unibody: 2.53Ghz C2D, 4GB, etc. I have to say, the inertial scrolling is very cool, and sort of a crime that Apple is currently only letting new owners use it!
However, the WLED LCD versions (1600x900 and 1920x1080) seem to be not 16" in size but rather just 15.6", while the 720p LED Display w/ TrueLife and RGBLED LCD (1366x768 and 1920x1080 respectively) are 16" in size. Is this correct? If so:
- Why are some of these screen smaller than the others?
- Are the quality of the screens 1,2 and 3 all the same execept for the 4th, the RGBLED version?
- Some people review that the RGBLED LCD is phenomenal, while others state that has inferior contrast ratio than the regular WLED models?
Where are we in all of this and why is Dell making these choices so complacated as far as names, screen sizes and features?...
I personally went to a Dell retailer and saw a model featuring the Edge to Edge High Definition 720p LED Display w/ TrueLife (1366x768), which I assume is a WLED model though its not stated as such. I have to say, albeit the low resolution, image quality, color depth, contrast ratio and viewing angles are among the best Ive seen on any display currently on the market.
the screen on this laptop decided to go Red ... I connected the laptop to an external monitor and the image on the external monitor is fine..So, I'm assuming the screen is bad. I've been looking for a complete assembly (screen/outer shell) to drop in ...
Question, if I currently have a screen with resolution of 1366 x 768 ( HD ) ... I can purchase and install a Full HD display with 1920x1080p resolution and it work fine...I may just have to update a driver? Was thinking of Dell part number P8YVW
I am planning to get a new laptop within the next few weeks. My main purpose of use with the new laptop is Photography, so Image quality is paramount!!! I have been browsing through this forum and researched with good reviews about the dell studio 16 rgb led screen. Now problem is each model 1640,1645,1647 has it main problem of issues ranging from extreme heat,constant freezing,lock up,fan noise and the most noticeable throttling issues.
I dont plan to use the laptop to it's absoloute abilities...so hardly any gaming will be involved, just mainly phtography software and occasional movie watching. So overall which model has the less problems for what I will be using this laptop for?
My only criteria is I want the rgb led screen. Is the 1640 good enough?(is there a big peformance difference in Photo editing between a 1640,1645?
I write this thread as I dont want to spend time chasing up dell for parts,complaints and constant searching on threads for solutions! Or should I just get away from delll all together and get a Sony Vaio F series or AW? btw which screen is better Sony AW rgb screen or Dell xps 16 rgb led.
