Dell :: Which XPS 16 Handles The RGB Led Screen Best 1640,145,1647?
Feb 15, 2010
I am planning to get a new laptop within the next few weeks. My main purpose of use with the new laptop is Photography, so Image quality is paramount!!! I have been browsing through this forum and researched with good reviews about the dell studio 16 rgb led screen. Now problem is each model 1640,1645,1647 has it main problem of issues ranging from extreme heat,constant freezing,lock up,fan noise and the most noticeable throttling issues.
I dont plan to use the laptop to it's absoloute abilities...so hardly any gaming will be involved, just mainly phtography software and occasional movie watching. So overall which model has the less problems for what I will be using this laptop for?
My only criteria is I want the rgb led screen. Is the 1640 good enough?(is there a big peformance difference in Photo editing between a 1640,1645?
I write this thread as I dont want to spend time chasing up dell for parts,complaints and constant searching on threads for solutions! Or should I just get away from delll all together and get a Sony Vaio F series or AW? btw which screen is better Sony AW rgb screen or Dell xps 16 rgb led.
View 10 Replies
ADVERTISEMENT
Mar 17, 2010
So I have a 1640 with a t9900 3.06ghz processor being replaced with a 1647 i5 540M processor. Does the t9900 outperform the i5 540M?
On notebookcheck.com the i5 540M is rated lower than the t9900.
View 4 Replies
View Related
May 27, 2010
I've decided to get an xps 16 for college, and I am curious as to which to get. I plan on using it for college, but also plan on playing quite a few games on it as well when I have the time. Which would be better overall to avoid throttling issues, and just have the best performance for this overall?
On a side note, on the dell site, how do I tell which is a 1640, 1645, and 1647?
View 10 Replies
View Related
Feb 25, 2010
Please note that my GPU Throttles down when it hits 84C. This cycle will continue up and down as the system system downclocks the GPU.
View 10 Replies
View Related
Feb 17, 2010
So yes I have no cred and I am relatively new but I think we can all agree the direction of the heat vent on the XPS 16XX series needs to be changed to face downwards at least, so that the heat isn't dicipated directly onto the screen!
There doesn't seem anywhere available to add a secondary vent, so at least the primary vent needs to be improved.
I will send this to Dell_Bill_B as he requested in the throttling forum, and he said he would take this issue up at the next conference call!
View 10 Replies
View Related
May 29, 2010
I'm pretty disappointed since the whole reason I bought this computer was for photo editing and the RGB Led screen was just perfect. But the Dell rep tells me that they are no longer offering that screen and that they will be sending me a 15.6 inch WLED.
They are still checking with the dispatch people to make sure that they aren't shipping the RGB Led, but I was wondering what my options were? I'm tempted to ask Dell to give me the Studio 17 instead, since it seems to be one of the last Dell computers to offer the RGB Led.
View 10 Replies
View Related
Mar 17, 2010
Just curious if anyone else is having this problem/glitch when I unplug the laptop from AC power and the screen brightness is turned up about more than 1 tick the screen turns really red and dark but then brightens up a second later.
It seems odd that it turns mostly red and then back up to normal in a second
View 4 Replies
View Related
Sep 10, 2014
Studio XPS 1647 laptop can't boot past POST and stuck at Dell splash screen with progress bar at ~80%. After holding down FN and pressing the power button, all three volume LEDS would flash twice, immediately followed by the volume UP and DOWN keys flashing, and then followed by just the Volume Down LED flashing.
Recently my Studio XPS 1647 has had overheat problems, and sometimes they would cause BSOD with broken screen images. The BSOD always came with bcode 116 error: this is apparently video card related. So last weekend I opened the case, removed the heat sink and the fan. The heat sink vent was completely blocked with a thick layer of dirt, so it's no wonder for overheating. I cleaned up the heatsink vent and the fan, cleaned up the top of CPU chip and the top of GPU chip, reapplied thermal paste and put everything back together. After that, the machine couldn't pass the Dell splash screen on boot. I've already checked the discussions here and followed suggestions on holding down the power button to remove static, reseating the memory card etc., but they are of no use.
Finally I followed the instructions on starting up ePSA. I've tried it repeatedly, and every time the boot always stuck at the Dell splash screen with the progress bar at about 80% with or without applying ePSA. The SPA screen never came up if I held down FN+Power button. The difference between a generic boot and a PSA boot is that if I held down FN+Power button, all three volume LEDS would flash twice, immediately followed by the volume UP and DOWN keys flashing, and then followed by just the Volume Down LED flashing.
I've read from a few discussions talking about all three volume LEDS flashing would be a motherboard problem. But in my case it's three LEDs flashing twice, followed by volume UP and DOWN keys flashing once, and then followed by just the Volume Down LED flashing continuously. What this PSA blinking code means?
View 2 Replies
View Related
Aug 19, 2009
clarify me on the available screen choices for the 1640.
There seem to be:
1) Edge to Edge High Definition 720p LED Display w/ TrueLife (1366x768)
2) Edge-to-Edge HD+ Widescreen WLED LCD (1600x900)
3) Edge-to-Edge FHD Widescreen WLED LCD (1920x1080)
4) Edge-to-Edge FullHD Widescreen RGBLED LCD (1920x1080)
However, the WLED LCD versions (1600x900 and 1920x1080) seem to be not 16" in size but rather just 15.6", while the 720p LED Display w/ TrueLife and RGBLED LCD (1366x768 and 1920x1080 respectively) are 16" in size. Is this correct? If so:
- Why are some of these screen smaller than the others?
- Are the quality of the screens 1,2 and 3 all the same execept for the 4th, the RGBLED version?
- Some people review that the RGBLED LCD is phenomenal, while others state that has inferior contrast ratio than the regular WLED models?
Where are we in all of this and why is Dell making these choices so complacated as far as names, screen sizes and features?...
I personally went to a Dell retailer and saw a model featuring the Edge to Edge High Definition 720p LED Display w/ TrueLife (1366x768), which I assume is a WLED model though its not stated as such. I have to say, albeit the low resolution, image quality, color depth, contrast ratio and viewing angles are among the best Ive seen on any display currently on the market.
View 10 Replies
View Related
Feb 25, 2013
the screen on this laptop decided to go Red ... I connected the laptop to an external monitor and the image on the external monitor is fine..So, I'm assuming the screen is bad. I've been looking for a complete assembly (screen/outer shell) to drop in ...
Question, if I currently have a screen with resolution of 1366 x 768 ( HD ) ... I can purchase and install a Full HD display with 1920x1080p resolution and it work fine...I may just have to update a driver? Was thinking of Dell part number P8YVW
View 4 Replies
View Related
Jan 10, 2009
Perhaps some of you have more experience with this than I do, so I thought I'd ask.
I know the 1640 has DisplayPort, VGA and HDMI outs -- my question is this: Can I run two external monitors with this laptop using the outputs --
I'd like to run 2 24" (1900x1200) from the 1640 -- I don't really care if the internal LCD works when I have it plugged it -- I'm just looking for a psuedo-docking solution when I'm at home at my desk
View 3 Replies
View Related
Oct 2, 2009
I have the WLED Full HD display with the 4670 card. The issue I am having is that on the right side of the screen (rightmost two inches) on a white background only on the white area you can see a faint flickering that sometimes looks like waves coming up from the upper right conner. Again, this effect is very faint, yet visible if you know about it. Is like the wind is messing up the "water" or something.
To see it/test it open IE (or notepad etc) at google and look at the right most side in the white area. It is easier to see if the screen is tilted away from you or looking from under, however, I can see it in the regular position I use.
If you have the same configuration can you please check yours if you see anything?
The problem it is not visible in an external monitor.
Dell replaced my screen in which the problem is milder than the previous screen, but it is still there.
I kinda accepted it as fact of life for the screen, however, when I update the ATI driver, during the update process the screen flickers for a second or two (goes black) and after that there is no problem until I reboot. So apparently the driver is reseting something that makes the problem go away.
I now have Win7 RTM, but the problem was present with Vista and in the Dell Diags CD (if you move the Diags window to the right). I have the A10 BIOS, the problem was also present with A8.
The screen brightness setting does not affect it.
I run a couple screen test software with a lot of patterns no additional problems there ,i.e., no distortion of the patterns, other than the above issue on a white background.
I do not mean to be picky about it, but it bugs me since my other laptops do not have this issue and now that I found that the issue can go away momentarily with the driver update/change.
View 10 Replies
View Related
Feb 22, 2010
I just want to know if Dell fixed the problem with their new screens, i am having some dust particles in the lower left hand corner..
i called Dell and after arguing with the rep, he said they will send me a box and i have to ship the Laptop to them for a screen replacement. The rep was saying that this was due because i dropped the laptop and cracked the screen, this is ridiculous because the laptop has been sitting on my desk and never been dropped.
Anyway, i just want to know if they fixed the new screens, because if they don't i can wait because the replacement screen will have to be replaced again in few months..........
View 5 Replies
View Related
Dec 14, 2009
I'm wondering if there is a way to shut down the Screen monitor on (Dell xps studeio 1640) while it's working downloading?
Usually there is a button on the keyboard for this kind of task, but I haven't been able to find any (Fn+Button) combination on the keyboard for this particular task..
PS. I know that putting the laptop screen all the way down is a way 2 solve this, but im looking for other or -the Button "shutdown" alternative....
View 10 Replies
View Related
Nov 11, 2014
My xps 1640 has been going strong until today for 5years +. I haven't even replaced the battery yet and it still works incredibly well, quite amazing I'd say. However, I've spent countless hours today trying to troubleshoot this issue and I can't even find a proper e-mail to contact dell with. I don't have warranty on it anymore but this is something that should be covered regardless of the limited warranty. The laptop is still in quite good state, I've never dropped it and I've maintained it properly throughout it's years. Aside from minor wear on the edges and the side lights not working anymore I have no issues with it. I was considering even upgrading the ram and ssd since it's my main workstation at the moment.
Anyways, I'll restate the problem: Computer turns on fine, no issues, if I move the screen up and down, 90% of the time there's a specific angle that it will trigger the notebook to turn off completely. It will start right up again if I press and hold the button, but otherwise it turns off instantly. This is not a sleep feature or anything, it's happening before and after I'm in Windows. I got through a day long's train ride and had no problems with this, I got into my apartment, booted it up, tried to readjust the screen and boom on the same day...
View 3 Replies
View Related
Oct 6, 2009
So lately my SXPS 1640 has been crashing every so often, with a blue screen coming up saying:
POWER_DRIVER_STATE_FAILURE
(or something along those lines)
saying that the computer is restarting to protect the device. I haven't been able to read all of what it says because it restarts to quickly but it's getting really annoying as it is happening more frequently.
It also generally only seems to happen when I've been using it with the battery only and not when it's plugged into the socket.
View 4 Replies
View Related
Apr 27, 2010
but I can confirm just now that I took the plastic cover off b/c I could not stand the glare anymore, and it's a very nice matte screen underneath!
Now I am going to follow the other bold gentleman and cut out that clear plastic, leaving myself with an antiglare xps 1640!
The plastic is actually 1 mm thick as the xps1340 poster (livincali) stated. I was worried that for some reason the xps 16 would be slightly differently built than the xps 13, but it's not with regards to the screen.
I am confident that the plastic can be cut out with an exacto knife, if not just a pair of scissors.
I do not have any sandpaper .....
View 3 Replies
View Related
Jun 8, 2009
When I recieved my xps, my screen had a ton of dust/debris in between the plastic cover and the lcd.
I called dell and they set up a service call. Is taking off the screen a very involved process?
will my laptop still be the same once they put it back together? anything I should ask the tech to do to make sure he doesn't mess it up?
View 5 Replies
View Related
Jan 10, 2010
this is a little thing I noticed just last night, actually, about my 1640, I guess I probably didn't pay much attention to it before, but:
Most easily seen when the background is black (e.g. screen saver, boot-up, etc.), I noticed that the black in the middle is the darkest,
whereas the black on the left and right sides are slightly lighter (as if due to extra residual light from either side), and gradually smooths into the darkest of the black, of course
View 4 Replies
View Related
Jan 9, 2013
I have had my Dell studio xps 1640 for around 2 years now, apart from the common overheating problems has been working fine.
Last night i powered down as usual after watching some live stream football, this morning went to start up again and the keyboard lights up & can hear the fan running but getting completely blank, black screen. It seems windows isn't loading up either as if i push the power button again it shuts down instantly.
I have always kept the inside clean and free of dust and really need to know what may need repairing. Could it be a Graphic or video card or Motherboard problem.
I have also tried the usual checks of memory but have not tried to get display via vgi or hdmi in to another monitor.
View 5 Replies
View Related
Feb 27, 2010
After waiting for over a month or so, I finally got my XPS 1647 from dell. I was very keen on adding a second HDD to store bulk data and use a SSD as primary driver for OS.
Speical thanks to this specific thread, specially Nando4 for all the information.
Pre-Requisites:
Confidence to open your laptop
HDD Caddy to replace the Optical Disk Drive - I got one from New Mode Electronics, which sells such caddys. This specific machine uses 12.7mm (height) slot-loading model with SATA external interface. You can buy it on ebay too for a cheaper price, but most of them ship from China and takes a long time to arrive.. and if there is a problem..its a nightmare to return or re-order.
A second HDD
Dell Service Manual for Studio XPS 16 series - Specially how to replace the Optical Drive
Here is the Pictorial :
Click on each of the image below to see a larger image (in a new window)
Step 01 - Ready to Dismantle the Laptop
Step 02 - Remove the Back cover (10 screws to remove)
Step 03 - Remove the Rear caps (slide, and pull out as described in the dell service manual). Don't apply force.
Step 04 - Remove 14 screws (this is needed to remove the palm rest). On my system 10 screws were marked "P", 2 were marked "K" and 2 were flat screws.
Step 05 - Turn over, and remove the two screws to remove the palm rest. (Point to remember - once you are done, and when you tighten this later, don't tighten it too much, else the plastic under it would crack). Once the two screws are removed, use the two tabs to pull out the palm rest (as described in the service manual)
Step 06 - Disconnect the cables connected (by lifting the tab - again - its described very well in the service manual).
Step 07 - Remove the cables connected (two of them). Now the palm rest is free & the motherboard and the ODD is visible
Step 08 - View of the mother board and ODD
Step 09 - View of the mother board and the 3 screws that need to be removed to free the OOD
Step 10 - One screw at the back to remove the ODD. Point to note - the HDD caddy did not have this screw hole - but the HDD Caddy fits in place securely with other 3 screws.
Step 11 - the ODD is now free - You can see the inter-poser (SATA to the motherboard pins) - simply pull it out from the ODD to set it free.
Step 11a - View of ODD out of the system
Step 12 - The ODD and the HDD Caddy that I got from New Mode Electronics. There is a component that is used on the ODD to secure it to the motherboard - This needs to be removed (2 screws) and put on the new HDD caddy as shown in this image.
Step 13 - View of ODD, Securing Component, Interposer, and the HDD Caddy - all side by side.
Step 14 - The new HDD caddy with the 500 GB Seagate HDD (that came with my system), interposer and the securing component
Step 15 - Plug in the HDD caddy in the system and fasten the screws. From this point, its just a reverse process of putting things back in place (palm rest, screws, rear caps and the back cover)
Step 16 - BIOS - now shows the second HDD !
Step 17 - Window Shows the second HDD!
Total time taken from start to finish (including taking photos..etc) - 60 mins!
So, there you go.. you now have a second HDD in your XPS 1647..
View 10 Replies
View Related
Jan 21, 2010
I've been stalking the XPS 1645/1647 for a while now hoping that the overheating/under clocking issues get resolved. I'm to the point now where I just need to roll the dice and make one of these work for me.
Currently I work off of a Mac Book Pro (latest unibody) with the 3.06 GHz processor upgrade and the 256 SSD upgrade and 4GB RAM. I do primarily web design (.NET, WordPress, etc.), so I stay in Windows (via Bootcamp) most of the time or work on my Sony Vaio Z. I was waiting for the Bootcamp upgrade to come out in hopes that it would help the hardware cope with Win7 better. Well, it came out a couple of days ago, and it did help, but it's still lacking in a few ways.
My question is around the processor. My everyday activities, making up 80% of my day, are fairly light with the exception of Adobe Creative Suite apps and Microsoft Visual Studio, but I do a decent amount of video processing. I am looking for the most power available without sacrificing battery life. If I understand the processor options correctly, that would be the i7-620M. How would that processor compare to the i5 540M in terms of speed and battery life? I have read that the i5 is "newer technology" and "should" be more efficient than the i7's.
View 10 Replies
View Related
May 22, 2010
This was released at the same time as A09 for 1645, why is nobody talking about it? Does it remove the 84 degree gpu limit like A09 does?
View 10 Replies
View Related
Feb 19, 2010
I ended up choosing the Studio XPS 1647
It should be shipped in a week or two, and I was wondering what recommendations you all had for it. I plan on reformatting it to get rid of all the bloatware and also undervolting it.
I'll use it as a desktop replacement and occasionally play some games on it (probably nothing too demanding though). So any suggestions on what to do to start off right and keep it healthy?
View 9 Replies
View Related
Mar 9, 2010
I'm getting this next month (or the order says I am), and I have a couple questions reading this forum:
1. I'm getting an i7 Quad Core -720, that's still a 1647 right? I keep reading that the 640 is what that goes up to, but am not sure.
2. What is throttling? I do a search on the internet and all I get is Drag Racing info Is that when the fan starts to spin super hard?
3. I've got a 1640 that I'm selling once I get it....it's new from Dell because of an exchange so no warranty (but can be upgraded by the buyer), what do you think is a fair asking price? It's a P8700 2.53 Core 2 Duo, 4GB RAM 320GB HD, 512MB ATI 3670. HD screen, etc.
View 5 Replies
View Related
Apr 11, 2010
I just got my 1647 in yesterday and it's been a struggle of immense proportions. I have a MSDN subscription, so I ordered it with Win7 Home and reformatted it when it got here to install Win7 Pro. I have finally got all of the yellow exclamation marks gone from the Device Manager, but I don't have any Bluetooth connectivity.
I could have sworn I checked that box during the build, but I can't find it in any of my documentation. What's worse, when I go back to the Dell EPP site, I don't even see the Bluetooth module listed as an option when trying to build another one. Could this mean that it isn't available on XPS's configured on the EPP system?
I do see the Bluetooth radio listed in the BIOS to be turned on by the wireless switch, but the light never comes on, on the front of the machine when turning wireless on and off. I'm taking that as a bad sign.
View 10 Replies
View Related
Mar 22, 2010
I am currently being offered a exchange for my 1640, and they are giving my the option to configure it.
Which is better? And how do i know which is the 1645 and 1647 on the website?
View 3 Replies
View Related
Feb 9, 2010
I have just ordered a XPS 1647 & was unsure if I should download all the Bios from the DELL website when I get it. There is currently the A00 & the A01, do I download both or just the latest release
View 3 Replies
View Related
Dec 3, 2009
I've been starting to see more references about Studio XPS 1647 here and on Dell's site, but I couldn't figure out what distinguishes this model from the others (1640 & 1645).
View 10 Replies
View Related
Feb 8, 2010
for 130 Watt Adapter and update to the latest BIOS
View 10 Replies
View Related
