Has anyone successfully charged an iPod (Touch, specifically) via the Powershare USB port, while the laptop was turned off. When I plugged my iPod Touch, it powers on but doesn't charge.
The manual that comes with the SXPS says some devices won't charge and some will.
I received my E6410 a few days ago and was quite dismayed to find out that I cannot charge peripherals on the powered USB port when the latop is off/hybernated/stand-by *and* the power cable is plugged in. The specs say that the latop has a powered USB port (the one above the e-sata port), and I had assumed that powered USB was the same as always-on. Is that not the case?
I checked a colleagues E6400 today and noticed that the same USB port has a lightning symbol, but that symbol is not on the E6410. The E6400 BIOS also has a setting for "USB PowerShare" which selects whether or not USB charging can be done when the computer is off or hybernated. No such setting in the E6410 BIOS..... Did Dell remove that feature in the E6410?
What is this exactly? I'm planning on buying an external enclosure for my spare 3,5" SATA HDD, and I'd like to get one that uses the eSata interface.
Now I heard these need seperate power supplies sometimes..
Dell Support said this feature is not supported by them however its there feature (What) anyways can some one tell me that has it working on a XPS 1640 how it is set in the BIOS and what else I need to try to get it to work.....
View 10 Replies View Relateddo HP dv5t and dv7t notebooks have self-powered eSATA?
View 3 Replies View RelatedI just realized that the port on the right side of this laptop that I typically use as USB also doubles as an ESATA port. I have a 1TB external that supports eSATA but didn't come with a cable *sigh*.
Can a normal 5400 RPM 2.5" laptop HDD even reach speeds that make it worthwhile to use eSATA instead of USB? Or am I just better off using the drive over USB and living with the slow speeds?
I pugged a drive into mine for the first time last night (after I figured out that you have to plug in both the eSata and the USB cable for power.)
View 7 Replies View RelatedI have an SXPS 1340 running Windows 7 Ultimate. I have tried to connect a Western Digital My Book Home external HD through the esata port but i can't get the computer to recognise it. Has anyone else successfully connected this model HD to the 1340 through esata? To those of you who have successfully connected a different external HD through the esata port what brand and model of external HD are you using?
View 10 Replies View RelatedI have an XPS 14 Ultrabook. I did a clean install of Win 7 Pro (from windows 8). The USB port (one with powershare) closest to front of keyboard is not working, the other USB port is working.
Did I miss a driver? If so, which one. Unfortunately, I was working on the driver install at 3am and didnt take as good of notes as would have desired. I dont see any problems when i open device manager????
According to the manual, this model is suppose to have USB Powershare abilities, however, I cannot for the life of me get it to work for charging my LG G2 phone. My previous laptop (not a Dell) was able to do this without any issues. Powershare is enabled in the BIOS, I am using the USB port with the power symbol, but when the laptop is put to sleep or powered off, there is no power to the USB port. I have tried unplugging my phone after the laptop is put to sleep, and plugging it back in, but that doesn't work either. I have also checked and disabled USB suspend modes in the power management tabs of all USB hubs and the Human interface devices. I also tried repairing/reinstalling the chipset drivers after the latest BIOS update (A03).
View 2 Replies View RelatedHere's my story and, let's say, my analysis:
I bought a generic 2 HD sata2 RAID1 enclosure based on the chipset Silicon Image SteelVine 5744. It can be used in USB or eSATA2. This embedded chipset (named SiL5744) is known (understand "claimed") to auto-handle Sata I/II and host sata2 controllers that not support the port multiplier feature. The HD are two Samsung F1 1To. There's no jumper to rollback to SATA 1.5Go on them, you can only do it by flashing the HD's bios, however we don't need to do it as I wrote just before, the SiL5744 supports SATA 3Go natively.
The enclosure works pretty well with USB, but *not* in eSATA : the E6500 freezes/hangs just after the POST step (a potential driver issue with the installed vista 64bits is not the reason then). As soon has I disconnect the eSATA cable, the system recovers and continues as normal.
What I've tried/done so far :
Both E6500's BIOS SATA mode AHCI and IRRT mode were tested,
Intel Matrix driver and software was updated to the latest 8.7.0.1007 version (AHCI and IRRT),
The SiL5744 chip was upgraded to its latest firmware as well (in case of...)
In order to verify the esata cable, the HDs and the enclosure itself, I succeed to :
- Use the enclosure's RAID1 feature when using the USB connection, I could partition,format, and read/write on the logical volume
- directly connect *one* HD (Samsung F1 1To) to the E6500's esata port -(I have a sata2esata cable), Vista installed it and I was able to use it as normal, even the hotswap feature seemed to work fine (I unkindly removed it). I could so test both HD individually this way... On the enclosure hardware side, everything looks fine then.
An IMPORTANT thing : The E6500's ICH8/9-M sata host controller seems to support the Port Multiplier feature *ONLY* on sata port 0 -as a bubble message from the Intel Matrix soft sometimes shows up-, but this is exactly where the internal HD is plugged on the motherboard I found nowhere you can change the internal sata port ID (switch,bios,ect...). I think this is the key of the problem that seems to be a dumb port conflict, because the esata port is in fact the port sata 4 (the DVDRW drive is sata 1, dock's esata is 5 for instance). If somebody knows how to swap the sata port ID, I think I won't be toasted !
This is interesting... a friend of mine just tried to order the SXPS with the i7-820 processor and got denied by Dell. Apparently, the 1645 has been fully discontinued, and Dell will no longer be placing the i7-820 processor in any SXPS form factor. They quoted that due to hardware and power issues as the reason behind discontinuing the 1645 (and replacing it with the 1647) and killing i7-820 support. The sales rep said the only offering will be the Studio series for the i7-820.
As a 1645 owner with the i7-820, this is kinda scary that this laptop has been discontinued this quickly as well as the offering of the 820 series chip. We ended up calling a second time, and another sales rep confirmed the same story.
Anyone get similar information from Dell on this? I'm also wondering if this is a "Dell Canada" thing...
I just received my brand new XPS 13 yesterday and followed the quick start instructions. Plugged it in and pressed on the power button. As soon as the power came on, the fan started blowing and is so loud I cant believe this is normal. I decided to convert from my MacBook, so I'm new to Dell... is this normal? It's so loud, I can't ignore it.
View 1 Replies View RelatedThe Dell D830 comes equipped with one powered USB port at the rear.
The powered USB port is compatible with USB 2.0 connector. When used with a powered USB connector that looks like a bloated RJ45, powered USB port can supply 5V (beige), 12V (blue), or 24V (red)..
They are color-coded and connectors are keyed to distinguish between them..
I've got a relatively new XPS 13. I noticed that I seem to lose battery charge even when I'm completely powered off -- about 10-15% overnight. Is this common or is something draining the battery that shouldn't?
View 1 Replies View RelatedI recently came across something regarding the right USB port of my M1530 (the port right below the Slot-Loading Optical Drive and next to S-Video).
The two ports on the left were full (one 160GB External HD and a Logitech V450 Mouse Receiver). When I plugged my other 80GB external hard disk to the right USB port, a pop-up box said that I should plug it into a "high-powered USB port" to maximize its performance or something.
Sure enough, when I was transferring big folders of music files, the transfer rate was very slow. So I plugged the external hard disk to one of the ports on the left, and the speed was back to normal
I have just recently received a new XPS 13 with the new haswell i7 processor, 8gb RAM, 256gb ssd, and windows 8.1.
I really like this laptop, but it makes a really bizarre noise. It happens constantly as soon as its powered on, like a high pitched whirring sound from somewhere beneath the keyboard. It also seems pretty inconsistent, like it flickers in frequency, and when you use programs (e.g scroll through webpages) it gets louder.
Looking to pick up a USB Hub and was wondering if I connect it to the USB port on the right side (not the USB/eSATA port), will it be powered?
View 3 Replies View RelatedMy Inspiron 15R SE which I purchased from Dell Canada in February 2013 recently acted up on me. It was just like any other day, I run the laptop battery down, then plug in the power adapter when its low.
This time however, the laptop just suddenly shutdown (not through Windows, like just up and died). I tried to power it up again and each time, barely 30 seconds after it powers up, it just up and dies.
I had to do work on it so I thought I let it sit for awhile to charge the battery, thinking that I can run it on battery at least. But alas I left it there for even a whole night and the battery did not even charge a drop.
I then tried removing the battery and only running on power adapter only but it won't even start. I have also tried another power adapter but the same issue persists so I can safely rule out the power adapter.
The power port doesn't look damaged either seeing as I have always loyally bought Dell throughout the years, and I really need to get work done (it is my primary computer).
when i power on my laptop i am getting a beep sound 4 times and not able to boot to windows.
i am getting a blue screen error code 0x0000001A
Can the eSATA port be used with regular USB devices? Seems as it doesn't fit correctly.
View 5 Replies View RelatedWindows 7 32-bit upgrade CD (not SP1), from XP. no anti-virus yet. Windows Updates current to SP1.I have always had my DELL mouse plugged in to rear port, but for unknown reasons it is now dead to all USB devices?
Mouse is now recognized by side USB port, but I like to keep them free for bulky flash drives..I tried uninstalling all ports/refresh from Device Manager, but rear port is still dead to all USB devices.I then tried a repair install from desktop, but still dead (1st time HD light flashed for 1sec, then nothing from then on).
I have a Dell Inspiron 5521 that is about a year and a half old. In the last two weeks, it's begun to make a beeping noise and will not boot up. As far as I can tell, there's no pattern or end to the beeps -- it's just one beep continuously. The longest I've let it beep before I couldn't stand it anymore and popped the battery out was 25 beeps. There are about two and a half seconds in between each beep. Up until very recently, taking the battery out and putting it back in seemed to solve the problem, but that no longer seems to work.
I've researched beep codes but can't seem to find one matching that description.
Running Windows 7. The BIOS version and date is Dell Inc. A05, 1/3/2013, SMBIOS Version 207.
I have a studio 1537 with the Ati graphics.
The problem i have is when i power on the laptop i get a warning saying Hit F1 Critical battery warning .
So i hit F1. Then get the option to hit F1 to continue or F2 to enter setup as battery cannot be identified.
So i hit F2 so in the bios i see not battery and it says NO charger detected.
Now my problem is the battery is totally flat if i pull the PSU the system dies . I have changes the power jack as i read the could give trouble.
What I could do next as other than this my machine is perfect. Just a note i also have two spare batterys one 6 cell and one 9 cell and still neither charge
I'm getting about 15-20MB/s (transfer speed) transfering files from my Lacie d2 Quadra(eSATA 3 Gbits port) to my M4400 with Vista 32Bit thought eSATA port.
eSATA port has 3 Gbit/s bandwidth, so I wouldn't get about 300-375 MB/s transfering data?
i can't get my xps 435 mt (running vista 64 home premium) to recognise my new seagate back armour 2tb drive via eSATA. The drive works fine with USB connection, but is not recognised via eSATA. In BIOS the drive doesn't appear in the list of drives under eSATA either.
I searched and found a similar post but it was someone with RAID setup and the solution there doesn't work for me. Checking for relevant 435mt updates on the dell site - I can't update intel matrix storage manager r205899, as you need to be set as RAID in the BIOS for it to work. When I install r205900, it installs some files, but nothing happens.
I have looked for driver or firmware updates for my eSATA drive on the seagate site - nothing there either. Can't think of what else to try... Dell support will charge to help me since I'm out of warranty (even though it's highly likely to be an issue with the eSATA since I got my system).
I have a Rosewill ext. enclosure and I cannot get the laptop to recognize the drive unless I reboot the laptop with the drive on.
However I am able to simply plug this drive into my desktop and turn on with no problem recognizing it.
I'm just wondering, does the XPS16 support swappable eSata?
I have recently been debating whether or not to buy this eSata express card for the external HD I'm buying for my m1530:
http://www.tigerdirect.ca/applicatio...D&body=QA#tabs
I was all set until I read about people having problems fitting the cards properly into their m1530s, so now I'm debating whether or not to buy one
In particular pay attention to the port on the bottom. This is an "eSATA" port, correct? Now for the crazy question of mine: Is this eSATA port compatible with a male usb connector? I'm pretty sure it isn't, but would like to confirm before I try and destroy something
View 10 Replies View RelatedIs it possible to connect more than one eSATA device to the external eSATA port?
<wishes that Dell had a user guide for their flagship product>