Dell :: SXPS 1340 Connected To A WD My Book Home Through Esata Port
Dec 8, 2009
I have an SXPS 1340 running Windows 7 Ultimate. I have tried to connect a Western Digital My Book Home external HD through the esata port but i can't get the computer to recognise it. Has anyone else successfully connected this model HD to the 1340 through esata? To those of you who have successfully connected a different external HD through the esata port what brand and model of external HD are you using?
I bought a generic 2 HD sata2 RAID1 enclosure based on the chipset Silicon Image SteelVine 5744. It can be used in USB or eSATA2. This embedded chipset (named SiL5744) is known (understand "claimed") to auto-handle Sata I/II and host sata2 controllers that not support the port multiplier feature. The HD are two Samsung F1 1To. There's no jumper to rollback to SATA 1.5Go on them, you can only do it by flashing the HD's bios, however we don't need to do it as I wrote just before, the SiL5744 supports SATA 3Go natively.
The enclosure works pretty well with USB, but *not* in eSATA : the E6500 freezes/hangs just after the POST step (a potential driver issue with the installed vista 64bits is not the reason then). As soon has I disconnect the eSATA cable, the system recovers and continues as normal.
What I've tried/done so far :
Both E6500's BIOS SATA mode AHCI and IRRT mode were tested, Intel Matrix driver and software was updated to the latest 8.7.0.1007 version (AHCI and IRRT), The SiL5744 chip was upgraded to its latest firmware as well (in case of...)
In order to verify the esata cable, the HDs and the enclosure itself, I succeed to :
- Use the enclosure's RAID1 feature when using the USB connection, I could partition,format, and read/write on the logical volume - directly connect *one* HD (Samsung F1 1To) to the E6500's esata port -(I have a sata2esata cable), Vista installed it and I was able to use it as normal, even the hotswap feature seemed to work fine (I unkindly removed it). I could so test both HD individually this way... On the enclosure hardware side, everything looks fine then.
An IMPORTANT thing : The E6500's ICH8/9-M sata host controller seems to support the Port Multiplier feature *ONLY* on sata port 0 -as a bubble message from the Intel Matrix soft sometimes shows up-, but this is exactly where the internal HD is plugged on the motherboard I found nowhere you can change the internal sata port ID (switch,bios,ect...). I think this is the key of the problem that seems to be a dumb port conflict, because the esata port is in fact the port sata 4 (the DVDRW drive is sata 1, dock's esata is 5 for instance). If somebody knows how to swap the sata port ID, I think I won't be toasted !
Does anyone have ESATA working fully on this laptop at 3.0gbps? I thought I did but it turned out it would only work for small file transfers. Anything more than a few hundred MB would cause disk I/O errors.
I know that per the old ESATA thread Studio XPS 13, eSATA doesn't work most users worked around this problem by setting the enclosure or disk drive to limit the speed to 1.5gbps.
But I currently have an external mobile disk that doesn't let me jumper the limit (the western digital scorpio black wd3200bekt).
I contacted dell support on this a couple times now but they have no information.
Contrast this to Apple who just had an SATA speed problem with this very same chipset in their macbooks and they fixed it in about a week after the news broke: ...
In particular pay attention to the port on the bottom. This is an "eSATA" port, correct? Now for the crazy question of mine: Is this eSATA port compatible with a male usb connector? I'm pretty sure it isn't, but would like to confirm before I try and destroy something
Dell Support said this feature is not supported by them however its there feature (What) anyways can some one tell me that has it working on a XPS 1640 how it is set in the BIOS and what else I need to try to get it to work.....
I just realized that the port on the right side of this laptop that I typically use as USB also doubles as an ESATA port. I have a 1TB external that supports eSATA but didn't come with a cable *sigh*.
Can a normal 5400 RPM 2.5" laptop HDD even reach speeds that make it worthwhile to use eSATA instead of USB? Or am I just better off using the drive over USB and living with the slow speeds?
USB 2.0 is slow for a back up drive and moving data.
My Studio 17 has a dedicated eSata port which moves data at 3.0GB/sec. Now I would like an SSD drive, with an eSata enclosure. So I can rapidly hookup, back up and go.
Any ideas of what I need or how to go about this.?
Has anyone successfully charged an iPod (Touch, specifically) via the Powershare USB port, while the laptop was turned off. When I plugged my iPod Touch, it powers on but doesn't charge.
The manual that comes with the SXPS says some devices won't charge and some will.
I have recieved an external hard drive in the post today along with a cable to connect.
I connected the cable, turned hard drive on and nothing is happening. The hard drive connects via usb fine but that will be much slower to backup 500GB worth of data. Does anyone know if I need to do anything special to get it to work with esata or should it work straight away?
Not sure if the cable is esata 1 or 2 but it should work with either shouldnt it?
Is this port actually able to be used as a USB without any problems(such as for a USB mouse)? Now for the stupid part of the question, once its used for a USB device will I have any trouble using it for an eSATA device later on? Basically wanted to make sure using it as one doesn't lock it into being one specific type of port permanently.
I used to use my eSATA port every day with a few different devices. I started to have an overheating problem, so Dell replaced the motherboard and graphics card yesterday.
Of course, that means I lost all my BIOS settings. I'm pretty sure I have them back to where they should be (RAID mode on the SATA controller, eSATA port enabled), yet the eSATA port doesn't see a damned thing connected to it.
Every other piece of hardware is exactly the same as it was before. Any ideas as to what I might be missing?
I've had my eye on the Sony Vaio VPCZ11 however, I would like to add an external hard drive for data storage, is the USB port the only way of hooking up an external hard drive? How come a high end notebook like this doesn't have a eSATA port?
It comes with nVidia 7200 Go video card. Theoritically, nVidia video card could come with HDMI, but not always the case. So..how do I know if mine has one? I am actually looking for eSata port since I want to purchase an external HD for backup purpose.
So, I have B590 Lenovo Notebook with Windows 8 and the Wi-Fi doesn't work well.
When I try connect at home, my Wi-fi works fine. Not problem. But when I try another one - e.g. In School or somewhere in the city, the others wi-fis don't work. Windows 8 tell me something like "It's not possible to connect" .....
I have my mouse hooked up to a USB port on my MBP, the other USB port is connected to a USB hub with a printer and a keyboard. Whenever I put my MBP in sleep, whenever I come out of sleep my mouse needs to be reconnected, but my keyboard and printer work fine. I never experienced this with my mouse before I got a Targus USB hub.
Just started using brand new Latitude E7240 and connected to E-port docking station. When booting an error pops up as below: The battery currently attached to the system will not supply enough power to dock for it to function. Please attach AC power to the dock for it to function normally
F1 - continue
F2- change setup options
The Laptop and the dock stations are brand new. This is only happening with the 7240's.
I connected a dvd drive to my laptop using, a sata to esata cable. my laptop has a ESATA port.
I don't know if you should post some kind of config summary (if yes let me know, I will do it promptly) basically I have a HP DV6t quad edition with an Intel 5 serie chipset, PM55 express chipset (dont really know if it make any sense but still, I will just say state it) so I installed Intel Matrix Storage and when I connect the drive I can see it, but windows 7 does not see it, it's like I didn't plug anything in. [url] also my bios is almost configurable, I don't know why I can change the time, the date, the admin password, the boot order, virtualization, fan on/off that's pretty much it. so what options do I have if I want to make this dvd drive work?
I'm experiencing very strange problem with my Dell Vostro 3750. This machine is equipped with USB 2.0 capable USB ports and USB 3.0 capable ports. During the power-up any USB devices (or even multiple devices via hub) can be connected to the USB 2.0 capable port. However if even a single device is connected to one of the USB 3.0 capable ports, the system doesn't start.
I've reported the problem on the Linux kernel related lists: 59561
But the only answer was, that I should report it to Dell suggesting fixing of BIOS. Maybe this is a BIOS related problem, but Windows 7 starts on the same hardware configuration without problems.
As I'm mainly using Linux for my work, two USB ports are practically useless for me, I have to connect all my USB stuff via hubs to USB 2.0 ports.
My current BIOS (after last BIOS upgrade) is: DMI: Dell Inc. Dell System Vostro 3750/0VP036, BIOS A12 02/22/2012
In the process of trying different nVidia GPU drivers I inadvertently uninstalled a bunch of other nVidia drivers from my SXPS 1340 . Managed to reinstall most of them, but I keep on getting an error looking for drivers for the SM Bus controller. Now all the advice on t'internet is that this is part of the chipset drivers, which I have reinstalled a number of times- all the other devices are fine now, but the SM Bus controller is still flagged up in the device manager.
I have been waiting around for the release of all these new notebooks but I find that this is more within my price range while having solid specs.
I would plan on this build:P8800 (2.66ghz)4gb ddr3500gb hdd (maybe 128 ssd)210m gs
For you owners out there: Are still any problems with heat or anything after the bios update?What battery life should I expect with the 6 cell? or the 9 cell?Is the P9600 worth the extra $150?Does the leather accent wear easily?
Am I better off with just standard glossy?Any other concerns? or reasons I should or should not get this?
I bought this computer which is running 7win64 to update my T60 which I use with my home TV, a samsung digital running at 1360x768 resolution. The computer's native resolution is 1920x1080. I bought an hdmi adapter for the displayport from lenovo when I ordered the computer. Initially, the display works and at first it ran long enough to get everything set for a nice crisp display that fits the screen perfectly. The sound is there too, and is passed on to my receiver by the TV. Very nice. But then it begins to blink off until it doesn't work at all (the sound is cut off too). Lately it won't stay on long enough to review settings.
All updates are in place, both from microsoft and from lenovo. This has Intel 4600 graphics built in, and intel has graphics drivers available, but won't install them because of the lenovo supplied drivers.
I can't get any support from lenovo support because another device is involved.
I read online of some early users who had this problem with a docking station and i guess the problem was resolved with an updated driver.
What do you think?XPS 1340, Intel Core 2 Duo P8700 (2.53GHz/1066Mhz FSB/3M L2 Cache)Microsoft Windows Vista with SP1 Home Premium Edition 64-bit Edition EnglishMerlot
Red High Gloss Finish with Leather XPS 13404GB, DDR3, 1067 MHz 2 Dimm13.3 Inch Wide Screen WXGA WLED Backlit LCD with 1.3 MP CameraNVIDIA® GeForce® 9500M500GB 7200RPM
Free Fall SensorSeagate Hard Drive2 Year CompleteCare Accidental DamageProtection2 Year On-Site Warranty..6 Cell Batt/Adapter5GB DATASAFE ONLINE 1.1 FOR
SDO/DIMIntegrated High Definition Audio 2.2Cyberlink PowerDVD DX 8.2 for DVD8X DVD+/-RW Slot Load Drive$100 Dell Promo Gift Card w/ DPA - Arrives in 6-8Total: $1,282.16
I've had my laptop since June and have not been impressed with the graphics performance of the Hybrid SLI setup.
I installed nHancer for the first time and started tinkering around with stuff and noticed that some of the games I was disappointed in weren't utilizing both GPUs by enabling the SLI Load Balancing Graph (Vsync has to be disabled for this to work).
Upon further tinkering I noticed that for both GPUs to be used, the game profiles had to be modified with "Hybrid SLI mode" set to "1". Thought I'd share this information so everyone can try and get the most out of their computer.
Does anyone's screen dim itself every now and then? I don't know if it's a defect in the screen or maybe a bug in Quickset or something else, but occasionally my screen just dims a few levels.
Quickset shows it still maxed out and lowering it a notch and raising it back up using the keyboard shortcuts makes it go back to normal.
Does w530 can operate while connected to a power port in a plane? I understand that most of the in-flight AC power ports are limited to 75W, but I haven't tested my machine under such conditions.
If the information below is true, then why does Dell offer 6&8 G memory upgrades in the configurations? (Main points highlighted in color)
Memory Connectors two internallyaccessible SO-DIMM sockets Capacities 512 MB, 1 GB, and 2 GB Memory type 1066 MHz DDR3 SO-DIMM Memory configuration possible 1 GB, 1.5 GB, 2 GB, 3 GB, and 4 GB
Just wondering, as I have been "window shopping" today. So far, it looks like Dell's upgrades are actually cheaper than DIY kits. I guess you could subtract whatever you could sell your stock memory for.
To anyone who has actually opened theirs: Does it really only have two slots? 3x2 Gb kits are around 100-150 USD, depending on where you look. Would be too convenient to have empty slots to stick extra 2 G modules into...
