As i found it very hard to find the dimensions and weight of the sxps 1640 I will post them here.
SXPS 16:
Dimensions & Weight Width: 15.15" (384.9mm) Height: 0.95" (24.1mm) front / 1.34" (33.95mm) back Depth: 10.02" (254.6mm) Weight: Starting weight of 6.4 lbs. (2.91 kg)3
And a comparison the Xps 1530:
Weight: 5.78 lbs* (2.62 kg)
Width: 14.06" (357 mm)
Height: 0.93" - 1.38" (23.7 mm - 35.1 mm wedge)
Depth: 10.34" (263 mm)
how much a CDROM weighs? It might sound retarded, but is there anyway you can take the CD-ROM out of the laptop to shave some weight off?
Though, if it only weighs like 0.05pds, I rather not of course.
I am beyond my 30 days so i guess a return is out of the question? I am really not happy with it.
I didn't notice it too much because i got used to leaving it on my lap on top of a laptop bag ... so i don't feel any heat.
But it is soooo hot that i literally cannot even hand it to my wife, it would burn her.
The hot zones are all along the back, all along the left side, and the bottom on the left side.
I am dreading calling dell customer support, i know it is horrible for personal products
Just wondering if someone could lend some insight on why the SSD are significantly overpriced in AUS To Customize a SXPS 1640 from a 500gb 5400 rpm in the US is is $100 dollars, or $152 Aus.
While in Australia it is $800 to upgrade.. Who do you have to sleep with to get a decent price ?
I recently received a Studio XPS 1640 as a replacement for an M1330. While I prefer the size of the M1330, the 1640's full HD panel (and increased power) makes up for the increased heft, in my book.
I replaced the 500 GB 5400 RPM drive, that came with the system, with an OCZ SSD and installed a fresh copy of Windows 7, then the latest drivers from Dell.
Compared to my experience with nVidia and the M1330, this takes some getting used to.
1. Using standard Windows drivers for the ATI 4670, any time I did anything more graphics-intensive than navigate around Windows 7 (with eye candy on), the driver would crash and instantly recover. After upgrading via Windows Update to the latest on there, I got BSODs instead.
Also, my HDMI-connected flat panel only showed about 85% of the screen even though the resolution was correctly set at 1080p, the panel's max.
Once I uninstalled those and switched to the Dell-recommended with ATI CC, the BSOD and crashes stopped, and I used ATI CCC to remove the overscan and now the entire LCD is in use, as it should.
However, the computer will not start at all (power button does nothing) if my DisplayPort cable (to a Dell monitor) is plugged in. If I remove it, then I can re-attach it once I have powered the system on, but then Windows/ATI "forgets" how I like my monitors set up and I have to go through a whole process to get it back.
Also, regarding the HDMI Audio I use, every time Windows generates a sound, I get a "thump" of my external speakers powering on, and the sound is basically done, by then. If I play a song in WMP, the pattern remains, and when the song begins there is that thump, but once the song is playing then it is smooth sailing and clean sound until the song stops and then loads the next song, at which point that "thump" returns for a second, again.
2. The USB Kb/Mouse are not active until Windows is loaded. Why?
3. My old IR remote from my M1330 seems to do nothing for this new laptop. I did replace the battery just to make sure.
Anyone else with this laptop find that the screen has a very warm-reddish white balance, or is it just me? Compared to my MBP and other Dell laptops and screens, it has by far the most reddish whites.
I've tried the many ICM profiles posted here, and it definately made a difference. I'm now getting much more accurate colors, but the white balance itself remains quite reddish.
To make matters worse, the ATI CCC which, on my desktop computer, gives me White Temperature controls, those same controls are non-existant on the 1640 (same Catalyst 9.9 drivers).
Cannot enter standby in the Studio XPS 1640, Windows Vista 64 bit.
Whenever I click on standby, the computer acts as if it will go into standby, but then goes immediately to the login screen again.
I currently own the 1640 and have had nothing but problems over the last two weeks. Hard drive crash, optical drive broken, deal pixels etc etc. I'm thinking about returning the 1640 and getting the Sony FW instead. Is the FW a RELIABLE computer b/c at this point, I think that's what I'm looking for? Has anyone used both machines and how do they compare? For those that own the FW,
View 6 Replies View RelatedWhen I did a clean install of Vista on my computer, I must have wiped out the program that plays the Blu-ray discs, because it doesn't do anything when I put a disc in. Is there a way I can download this program again, or does anyone recommend another program to use instead?
View 10 Replies View RelatedUnder what conditions will Dell Canada replace a brand new Studio XPS 1640 laptop? I'm currently having my motherboard replaced and they put in the wrong 1, so I'm getting it replaced AGAIN.
View 9 Replies View RelatedI am probably getting the sxps 1640 and I was wondering would a bluray drive be worth it? I do have a Sony 40v4100 lcd tv. Can this drive output 24p through the hdmi port? And why isnt it a bluray burner like the xps m1530 line? How hard would it be to swap in a bluray drive, do you have to pull the whole computer apart to do so? Should I just spend the money on an external bluray player for my tv?
View 10 Replies View RelatedI tried two games:
NFS Undercover and Monsters vs aliens.
NFS undercover was able to run in lowest settings but graphics were like hell!
And monsters vs aliens didnt run at all...
I think, it might be GPU problem? May be my gpu is defective?
I have 512 MB ATI 3670.
I tried Vista and win 7 with latest drivers...I even tried uninstalling my antivirus...
should i install the latest bios driver a08 from the dell site? i dunno in these things and i wanna know if it's recommended and known to not screw things up, and if i even need it
View 4 Replies View RelatedI have the WLED Full HD display with the 4670 card. The issue I am having is that on the right side of the screen (rightmost two inches) on a white background only on the white area you can see a faint flickering that sometimes looks like waves coming up from the upper right conner. Again, this effect is very faint, yet visible if you know about it. Is like the wind is messing up the "water" or something.
To see it/test it open IE (or notepad etc) at google and look at the right most side in the white area. It is easier to see if the screen is tilted away from you or looking from under, however, I can see it in the regular position I use.
If you have the same configuration can you please check yours if you see anything?
The problem it is not visible in an external monitor.
Dell replaced my screen in which the problem is milder than the previous screen, but it is still there.
I kinda accepted it as fact of life for the screen, however, when I update the ATI driver, during the update process the screen flickers for a second or two (goes black) and after that there is no problem until I reboot. So apparently the driver is reseting something that makes the problem go away.
I now have Win7 RTM, but the problem was present with Vista and in the Dell Diags CD (if you move the Diags window to the right). I have the A10 BIOS, the problem was also present with A8.
The screen brightness setting does not affect it.
I run a couple screen test software with a lot of patterns no additional problems there ,i.e., no distortion of the patterns, other than the above issue on a white background.
I do not mean to be picky about it, but it bugs me since my other laptops do not have this issue and now that I found that the issue can go away momentarily with the driver update/change.
Please note that my GPU Throttles down when it hits 84C. This cycle will continue up and down as the system system downclocks the GPU.
View 10 Replies View RelatedI am really curious if any other 1340/1640 users have run into a similar situation.
The problem:
when typing on the lappy, sometimes the text jumps to wherever the I beak of the cursor is. At first i thought i was accidentally touching the touchpad with the base of my thumb, but now i'm sure thats not the case
I've already tried uninstalling dells drivers, using the drivers from synaptics website, changing the sensitivity of the touch pad, using the touchpad with no drivers at all (windows drivers only)...
1st time - Around 2 weeks back - My Motherboard, DVD burner and Palmrest was replaced
2nd time - 1 week back - Palmrest was again replaced
3rd time - This time - They said that they will replace Palmrest, Motherboard, LCD, Power Adapter..
I really cant live with this...almost after every replacements my laptop is becoming ugly and ugly...
I want to get my SXPS 1640 replaced/exchanged...
I own a Dell Studio SXPS16 and would like to install Windows 7.
My question being how will i install the drivers ???
Like do i have to download one by one or will windows 7 downloads themselves
Another point being how to do update my video drivers ??
Graphics Card - ATI 3670
For you people who are wondering: SXPS 1640 on left, 1645 on right.
http://files.fredfx.com/Dell%20Studi...Difference.jpg
I put setting on high (over half were on very high such as particles, water, physics, etc)
and i had on the one below native res with no AA. This was recorded with fraps, therefore i had to turn some of the settings down.
But here are some vids ...
I have a Studio XPS 1640 (3670 512mb, P8600, etc.) that I mostly use for gaming. During the past few months, I've noticed that occasionally when I'm playing a game, the FPS will suddenly go wayyy down. For example, I was once playing Oblivion and getting around 40 FPS, when all of a sudden the FPS randomly dropped to less than 10. The same thing has happened in other games such as TF2. I think that this may be due to overheating, because the computer still seems sort of sluggish even after I close the game. Anyone know what I should do? Maybe adjust the fan speed/get a cooling pad?
View 10 Replies View RelatedI need some help:
1) I want to know if anybody is using an SDHC card as a readyboost drive
2) What are the maximum SDHC specs that can be utilized by the computer (both size and class), i.e., what is the maximum size and speed supported by the reader.
If am thinking of buying this card for readyboost (I plan to have it always in the slot): ...
this is a little thing I noticed just last night, actually, about my 1640, I guess I probably didn't pay much attention to it before, but:
Most easily seen when the background is black (e.g. screen saver, boot-up, etc.), I noticed that the black in the middle is the darkest,
whereas the black on the left and right sides are slightly lighter (as if due to extra residual light from either side), and gradually smooths into the darkest of the black, of course
So I got my M1530 replaced with a SXPS 1640 with a 3670 video card and I have been getting this error message frequently. The laptop freezes then a few seconds later comes back online with this error message! How do I fix this?
View 10 Replies View Relateda new IDT audio driver to test ! It seems to me the slight pop when changing song in WMP12 is gone but I'm not too sure. I just downloaded it and might need more people to test it out to see if it fixes the crackling/popping sound.
Quote:
IDT Audio Driver Version 6.10.0.6255
[url]
Second, a new Synaptics touchpad driver to update too. I've always wanted to double tap to access the secondary menu like mac and I found a way to it ! With this 2-finger-gesture tool, our touchpad is exactly like MAC ! (no four fingers yet though) And now, you can double tap like mac multitouch to initiate secondary menu !
Get the latest here
Quote:
Synaptics Touchpad Driver Version 15.0.0.1
[url]
2-Finger-Gesture tool
[url]
This is the adapter that comes with the E6500. according to the Tech Specs page:
Power Supply:
90 Watt AC adapter with cord wrappingCan someone please measure theirs or is there specs online? I couldn't find it.
I am wondering what the physical dimensions of the 16" lcd is. Is it shorter than the typical 15.4"? .....
View 3 Replies View Relatedwhat are the dimensions of the DVD or BD drives that come with the Vaio SR series. I would like to replace the present DVD-RW with a BD reader or burner but I already bought one that was too thick.
If not dimensions can someone give me the exact model of the BD burner used by Sony in this series?
Hi, have just bought a Studio 1557 off eBay, but only after buying (not yet received) did I read various forum comments, here and elsewhere, about overheating issues (especially for the GPU, the HD 4570).
I want my laptop to last years (hopeful, aren't I!). I've read that several members have managed to put a copper shim (with thermal paste either side) between the chip and its heatsink and successfully lowered operating temps. that way, but can't find any mention of exact dimensions for the shim!
There are a couple of sellers on eBay that offer copper shims for laptop chips but they don't appear to have a stock one for the Studio 1557; they are willing to make one to measure, if I can supply dimensions, i.e. size and thickness.
I'd be grateful if anyone who's successfully fitted a copper shim to the GPU, in particular, of their Studio 1557 could post the exact dimensions, obviously including thickness, of the shim.
According to the specifications, the XPS Studio 13 is just under 5 pounds. I'm trying to get a feel for how heavy that is compared to the XPS m1330, which I have used with a regular non-LED display.
For those who have used both computers, does the XPS Studio 13 seem much heavier and more burdensome for carrying around than the m1330? I love the 1330 and am saddened that its successor model is not as light