I was wondering if anyone else has the 128GB Samsung SSD in their Studio XPS 16 and having stuttering issues?. Lately I have been having a lot of stuttering issues in which the mouse cursor freezes up.
Also, anyone running Windows 7 on it? I cant seem to get higher than 5.9 as the HD score under WEI. Anyone got a higher score?
I have been looking around for the answer to this but I'm still not sure.
I downloaded HwInfo32 and it says my firmware version is "Drive Revision: VBM24D1Q"
And then below it shows "TRIM Command: Supported (Indeterminate Read After TRIM)"
Does this mean mine already has the trim firmware?
i currently have two 1330s... one with LED and one with CCFL
The LED is a toshiba LCD2306, the CCFL an AUO Optronics, the CCFL looks MUCH better which seems to me total nonsense since the LED is supposed to be better in all aspects.
I will be contacting customer service. Should i be asking specifically for the samsung LED?
I was wondering if anyone knows whether Dell is shipping Latitudes with anything more recent than the Samsung RBX Series 1 SSDs..
View 4 Replies View RelatedJust bought a Samsung SSD 840 series 500GB drive to improve the performance of my Dell m1330. Placed the 840 in a HDD - USB adaptor and migrted the OS to it. Unfortunately the bios can't see the new SSD even though the 840 should be backward compatible with SATA I and II. The bios revision in my m1330 is A15 and I have tried both ATA mode and ACHI mode without any succes. Tried the drive in another m1330 same thing but when trying with a Packard Bell the SSD works fine. Have any of you succesfully added a SSD 840 to your m1330
View 2 Replies View Relatedjust got my new E6400 and I am having a problem with dual external displays. My displays are:
Samsung 204B (20", 1600x1200)
Dell 1708FP (17", 1280x1024)
The problem is the samsung only works using an analog VGA cable. If I even plug in the DVI cable, the samsung will not detect any output from the laptop/dock. I have tried installing the samsing display drivers, but that did not fix the issue. This was not a problem on my old thinkpad T41 that this new dell replaced, so although possible, I doubt the monitor has suddenly developed a bad DVI port.
If I use the Dell as the primary with the samsung hooked up using both cables, I can see two instances of the samsung, it just won't display anything until I pull the DVI cable.
My E6400 has the NVidia NVS 160 card. Running Vista 64 with the 64-bit NVidia drivers from Dell.
I had a 1680x1050 Glossy LCD (SEC3350). I called up and Dell, jumped through the hoops and eventually had them send me a replacement LCD. I called the tech this morning and asked him who manufacturer was, he said LG..
I was ecstatic. In my excitement forgot to check that the sticker on the LCD infact said WXGA+ across the front.
Dell replaced my WSXGA+ screen with WXGA+
The screen quality itself is really good, but there are two things I'd like clarified before I place my replacement order again.
I am planning on buying my Studio XPS 16 as soon as Win7 comes out and i really want a SSD with it. Unfortunately, Dell only sells the Samsung SSD drive which has been getting so much negative press lately on Anandtech.
So my question is, what should i do?!?! Do i give up my dream and instead go with a standard Hard drive for now, or take a chance with the Samsung SSD
my system spec are in the sig and its attached to a t260HD model monitor. When ever i have SLI enabled, yellowy orange colors causer my pixels to shift left and then return to their normal position a the screen refresh rate, so its like they are ion both places at the same time, just blinky for a lack of a better word. Now this does not happen on my regular laptop screen, and when i disable SLI this does not happen either, I just got new 8800m GTX SLI from dell because that was thought to be the problem but its still continues, Ive changed alot of drivers does not seems to be doing anything for me, going to try the tweakforce ones soon. I was thinking maybe my DVI cable is bad? Test that out before i test other monitors. Was just reaching out for any ideas about this problem, would just like my monitor to hands down work =/
OK quick update, now that i have new cards i put the original Dell baddy drivers on and its not doing it..but thats is very strange...why would a driver make an only SLI and only external Monitor issue......and on another note i really cant stay on this driver, i get SLI hitching issues in eq2 with it crysis runs better on single GPU mode, i need to find a driver that does not cause this....also i found a tendency for my white colors to turn yellow on my laptop monitor from drivers at the same time i would be having the tearing if i was on my large monitor, but on the stock one i can close the lid and open it again and the whites go back to the right color...
I can setup my display on my samsung 226bw so that it is the only display and that the internal lcd is turned off. It displays fine at 1680x1050.
However when I restart the laptop and get to windows the signal the laptop seems to send out is 1280x1024 (which the monitor reports). Windows still sets the desktop at 1680x1050 and the result is a desktop that is oversized for the monitor.
I can correct this by turning off the laptop, disconnecting the monitor, restarting the laptop and then reconnecting the monitor.
I can't figure out why it does this?
I have the Dell 1710 with 7900GTX and am using the NBF Mobileforce drivers v169.09 M4 drivers under xp pro.
I have also installed the drivers for the monitor as well.
I have this SSD in my xps1645. I have noticed that the performance has degraded and my windows experience index is 5.9 (originally 7.4). To my knowledge the firmware I have supports TRIM: VBM24D1Q. I have been using this for over a month, and have about 90GB of free space. Also I have another laptop with the same 256GB SSD drive, and the WEI is 7.4. I also ran PC Mark vantage on both, and the xps1645 has half the score of what my other laptop has. Any explanations or fixes for this?
View 8 Replies View RelatedIs the 120GB Samsung SSD that came with my M4400 considered slow by comparison to other SSDs now? I can't find any particular specs or comparisons that use this drive, but when I see other drives getting 200MB+/second, I know I'm not getting anything near that.
Also, is this a "first generation" drive that doesn't take advantage of Trim in Windows 7, etc.?
Also, I've tried searching for new drivers and firmware, but I don't see anywhere. I have Windows 7 64 on it now, and I've experienced a few BSODs, which is why I'm looking into possible driver/firmware causes. (Though I was also getting these occasionally in Vista 64.)
how does the dells (samsung right?) 128gb ssd which they put in the studio xps 13/16 compare to 7200rpm drives like the WD ones. is a little/lot quicker?
the drive dell use is the old 90mb read/70mb write ones i think,
That seems like a really slow place, since I have already ordered a drive last Friday off Amazon, based upon what I have read on this site:
1 of Samsung Spinpoint M Series HM160HC 160GB PATA-100 5400RPM Laptop/Notebook Hard Drive - OEM
The outstanding question, I suppose, is wondering if this drive is going to work because it exceeds 120 GB. I also read around here of a larger drive being used than what another model's BIOS supported, where it just recognized as much as it could, so that wasn't a problem (there).
It's a Latitude D600. Its a 160 GB PATA drive. I got it for $75 w/o shipping.
At the dell forums, the thread is still there, and its the only post I've put there, but they say now that my email address is not in their database?
This site is 1000 times that one for me so far.
So I was still confused about whether or not the SXPS Samsung SSDs would be able to accept the future firmware update (and thus be able to support TRIM). I contacted Dell's tech support via email and was told that the drives will support TRIM (though on 2 occasions he called it TRIP). I am not inspired by his lack of knowledge regarding the proper term and dont think that he is right. If I save the email would this help my case of getting a SSD from Dell in the future that does actually support TRIM?
View 10 Replies View RelatedI need to swap out the LCD panel on an Inspiron 9400. It's the TrueLife high res (WUXGA?) 1920x1200. The current panel looks bright but a bit washed out.
Someone mentioned that there are multiple vendors for the panel, and that some are better than others. Dell said that their records show that my system has Philips/LG whatever that means (I didn't think the two companies were affilated, are they?)
My Dell D600 can't see hdd in bios. I checked the adapter, it's okay
Hard drive works too in other computer. currently BIOS version A15
Hard drive samsung HM121HC
I've been researching the Lattitude E4200 and was wondering if people could chime in with more information about the screens available on the E4200.
I know that for the E6400, there is a lot of talk about screens, but it seems like there isn't for the E4200. I've read the few posts that there are regarding the two options that are available: Toshiba and Samsung.
Is there a general consensus of which one is higher quality? Does anyone have side by side comparison pictures? The information that I've read through is pretty scant in terms of not having many responses.
I just had a replacement done on my LED. I had a Samsung and now got a Toshiba. I feel that the Sasmung had better brightness and more vibrant colors. The Dell tech tells me that Samsung is not longer manufactured...
Has anyone who ordered recently gotten a Samsung LED?
To check, go to display settings, advanced setting, monitor, properties, details, hardware Ids:
LCD2306= Toshiba
SEC5441= Samsung
What's the current status? Does or doesn't it support TRIM and if then with which firmware?
View 10 Replies View Relatedafter reading some post about the better display for the WXGA+ on the M4400, I could hardly belief that someone that only saw the Samsung screen claims the LG screen is the worse one. In the past the LG screen were the better ones. Even in the other notebooks of the E-Series the LGs are the better screens, so I went and searched someone with the a M4400 but a different screen manufacturer.
View 9 Replies View RelatedI'm trying to install an extra Samsung 840 evo mSata in my new m3800 but the BIOS does not recognize the disc. I tried 2 840 msata both with same result not recognized.
Changed several settings in BIOS:
- disabled Intel Smart Technology- SATA operations to AHCI- Secure boot disabled- load legacy option enabled
Does the Samsung mSata is supported in an m3800?
i have a Samsung TV and i want to connect my laptop to it by using an cable from the laptop (VGA) to a HDMI to VGA adaptor.do i need a special driver for my windows 8.1 Operating system?
View 4 Replies View RelatedBought Samsung 2253BW 22" LCD Monitor
Plugged the monitor into my laptop DELL Inspiron 6400
Installed the samsung monitor drivers and Magictune ask to reboot
LCD on my laptop went blank (back light is on, no picture displaying)
Incompatible Video Controller at Diagnostics
Native resolution 0 by 0 at bios
Unistall everything samsung magictune drivers and software, uninstalling and reinstalling the graphics drivers. Tried booting in safe mode and doing all of previous said steps.
The laptop does not even display a picture when booting up (BIOS, Post, Windows Loading Screen, etc.) in the internal lcd screen only on external samsum lcd monitor.
Tried switching from CRT/LCD multiple times with the new monitor connected and disconnected.
I think it was a casuallity and I already change the inverter NO FIX at all
I dont want to replace the full LCD display from Dell as support say, I want to Sansumg pay for it IF YOU HAVE A SIMILAR PROLEMB PLEASE POST HERE, It doensn't matter if you already fix the problem by replace your LCD from Dell or by yourself.
I got a Dell Latitude E4200 with a Samsung SSD PB22-JS3 TM 64GB drive. Does anyone know if its firmware can be upgraded to support TRIM in Windows 7? Current
firmware version is VBM19D1Q. Seems like the version that support TRIM is VBM19C1Q. Doesnt that seem like a downgrade? I've had my notebook since October 2009 so I dont think it has TRIM support from the factory.
Firmware location I think is here: http://www.samsung.com/global/busine.../business.html
When I first hooked the computer up to the TV it asked how I wanted to display it, yadda yadda... both the TV and the computer recognize they are connected but the TV won't display anything.
View 7 Replies View RelatedI seem to have a failed brand new SSD. Before I RMA it.
-I've just used Samsung data migration to copy my C drive to a Samsung 840 Pro 128GB SSD as usual.
-I went into device driver, and set the SSD to cache writes, so the SSD was working then.
-I removed the 320GB SSD, installed the SSD and rebooted.
-After the BIOS flash screen, the system halts with a funny symbol on the screen and a flashing cursor.
-It responds to Ctrl Alt Del. but doesn't get as far as testing the DVD drive.
-After replacing the SSD with the HDD and rebooting, all is fine again ...
-The BIOS shows AHCI mode, and the SSD and contents (in a USB3 drive caddy) are visible and readable.
I can't use Samsung SSD magician because it won't see the SSD over USB (clever!), so can't work out how to upgrade firmware. This is an i5, 8GB, 320GB machine with 1600x900 screen, with XP Pro 64-bit.
What gives?? Others here have posted with working 840 Pros in a T420, so I think it's compatible. Could this be a SATA2/SATA3 thing or AHCI? I can't see any SATA2/3 control in the BIOS - does it just auto-negotiate?
Trying to do a clean install of win7 on a new ssd. Seems to be going well until time for reboot. then things go downhill from there, until nothing responds. Nothing I try works. I tried from both a iso win7 disc, and from a disk I have from my desktop. Same results. Is it possible to do a recover onto a new ssd? If so, how?
View 6 Replies View RelatedI wanted to upgrade my HD to a 240GB SSD as my primary and use the stock 1TB 5400 as my secondary. Would this configuration work?
My laptop arrives soon and just wanted to make sure this would work.
I purchased an external monitor recently so I can extend my Lenovo U410 IdeaPad's display. The monitor connects to my laptop via an HDMI cable. The problem is, nothing from my laptop is displayed on the external monitor.
The external monitor is still left with a black screeen with either the HDMI and Analog symbol flickering back and forth on the top left corner, or a box that shows "Check Signal Cable" with red, green, and blue boxes below.
On Control Panel>Appearance and Personalization>Display>Screen Resolution, I can see that the external monitor is detected: I have the external monitor as Display 2, and I have "Multiple displays:" set at "Extend these displays"I know that the monitor is not broken, because it works as an external monitor for my MAC (via HDMI cable as well) ....
