That seems like a really slow place, since I have already ordered a drive last Friday off Amazon, based upon what I have read on this site:
1 of Samsung Spinpoint M Series HM160HC 160GB PATA-100 5400RPM Laptop/Notebook Hard Drive - OEM
The outstanding question, I suppose, is wondering if this drive is going to work because it exceeds 120 GB. I also read around here of a larger drive being used than what another model's BIOS supported, where it just recognized as much as it could, so that wasn't a problem (there).
It's a Latitude D600. Its a 160 GB PATA drive. I got it for $75 w/o shipping.
At the dell forums, the thread is still there, and its the only post I've put there, but they say now that my email address is not in their database?
I was looking through the crucial site to buy some more RAM for the Sony Z590UBB. On the Z50UBB page, crucial says the drive interface for this particular Z model is PATA. The rest of the Z's use SATA interface. Can anyone confirm this? Is this a typo on Crucial's part? I find it odd that the rest of the Z use SATA, while this particular Z will use PATA.
I am having problems with some Blu-Ray DVDs in my DV9774ca with a optiarc BC-5500A ATA. When I put some Blu-Ray DVDs in the drive starts to spin and makes the normal searching noises for 30 seconds and then it stops without doing anything at all.
I decided to try download a firmware update, but the site says not to flash SATA drives with PATA firmware.
How can I find out what it is? I can only assume its SATA. The firmware I found is for PATA!
Also I assume that the firmware I already have is older than the downloadable version (not from H.P.). The downloadable version is 1.05 from November/08. I bought my laptop in Feb/08.
I put a brand new seagate 160GB SATA hard drive in my E1705. Before doing anything, the F2 bios screen displayed 160GB, but after installing windows vista ultimate, it is shown as 78GB in disk management, F2 bios screen, and everywhere else. This is a 7200rpm drive. Is there any hardware limit I wasn't aware of? What should I do regain the other 82GB?
I need a new hard drive for my M170. It uses the ATA6/IDE interface, so the new SATA drives are not an option. Is 160GB the largest drive available for my laptop at the moment? I have a feeling it is, as I can't find anything larger than that.
I was currently deciding on 2 particular configurations for a 1530 one with 250g 5400 hd and the other 160g 7200 hd. the 200GB 7200 is on back order 10days +
The HDX18 is now being offered with a 160gb SSD + a 500gb HDD 5400 option. HP won't disclose which SSDs are being installed. If anyone has one of these units,
Also, an HP rep told me that the OS is being installed on the HDD (which is a silly thing to do) rather than the SSD at the factory.
just installed the Intel X25 160GB SSD. If you all coach me on what benchmarks you would like to see I would be more than pleased to post them.
It does seem to make the system snappier - but I question the cost benefit.
My question for you all is that I cloned the drive using acronis true image and I am wondering if I would get better performance if I did a clean install rather than a clone of my drive?
I'm still finding my way round my recently acquired D600 laptop and was wondering whether it is likely to be infra red enabled, and how I would find out.
I believe it may have been an optional extra. If it isn't, is it much of a job to add it on. My main reason would be to transfer pictures from my phone, my other alternatives being bluetooth or cable, both of which I've had a bit of trouble with.
I've read reviews, and this laptop seems to have a history of problems. Thing is I'm trading my PSP (original model) with a 4gb memory card for this laptop. So, I couldn't really pass up on the deal it has a 1.4ghz Pentium Centrino processor, 1gb ram, and 100gb hard-drive. I've just been looking for a laptop that will do the basic functions
I was checking my email then all of the sudden, I got Dell's BSOD. I restarted it, when I got into desktop, BSOD again. So I decided restore (clone, I used it 2 times before this happened). The restoration was successful, but when I boot it up, after Windows logo, nothing, blank screen. So I did it again, restoring it. But again, blank screen. Then I decided to do a fresh clean install of XP, but when I tried to delete that partition, BSOD. I booted up again from the XP CD, I found it had been deleted. So I made a new partition, and format it (NTFS - slow method), but when it got into the middle of copying the files, it said it can't copy the files.
In the moment, I am formatting the hard drive into massive one, instead of two partition. I doubt it that it will work.
What's the problem with my Dell Latitude D600?
Do you think that's the hd?
Just FYI, before this happen, I was thinking of upgrading the hd into bigger hd.
Edit: Yup, it failed. Btw, my D600 is at least 5 years old, original hd.
I have a Dell Latitude D600 that came with a 60gb hard drive. I had a D600 previous to this one with a 40gb hard drive and I swapped this hard drive into the newer D600 since I had all my important data stored on it already.
Just the other day when I was performing some maintenance on the D600,
I accidentally dropped the 40gb on the floor when it was out of the computer. I thought everything was fine because it seemed to boot up when
I re-installed it, but I hadn't actually tried using it until today
The laptop about one month ago had the power jack smashed (cable was stepped on) someone plugged the cable back in, in doing so the main power pin (surrounding the center pin) was bent over so it now made contact with the (data) pin that tels the laptop what power supply is connected and if it is a genuine Dell.
This in turn shorted out the circuitry in the laptop that can read this 'data' line.
So no matter what power supply I use the laptop will always state that the wrong adapter is connected and will not charge. (strange also is the PCMCIA slot has no power. Everything thing else works.
What I have tried,
Tried my battery in another D600 (charged and ran no problem (my laptop would run from the battery but still no PCMCIA power.
Tried my charger on another D600 worked fine so the data pin is fine on it. Tried another charger on my laptop same problem.
I already fixed the power port.
Last I tried the laptop in a Docking station and same problem (wrong adapter type) This is fed through the bottom of the laptop not the power jack.
So this tells me the problem lies in the logic circuit on the main board.
So...
Is there a simply surface mount fuse that may have blown? or am I looking at a bad IC.
I ordered as a replacememnt drive a 'Dell ND6650A cdrw/dvdrw' Manufactured by NEC off Ebay which according to Dell is compatible with my D600 Latitude - they still have the driver updates on support etc.
I receive the package this morning and it aint going to fit in a million years !! So my question is, is there a fitting / adapter kit for this model to fit my D600
The unit does not power ON using the AC adapter, no LED lights. I tried using a different working AC adapter from a 600m and didn't work either.
Then I installed a charged battery pack from the 600m into the D600 bay and it power on just fine.
I googled the issue and one suggestion is that the DC power jack could be toast, so I bought a new one over at DCpowerjacks.net I have it replace by a professional, and after I reassembled the machine the problem persists.
Does anyone know why my Latitude D600 won't play back-up (burnt) dvds, but it plays the original disc? When I put in the burnt disc I hear a clicking sound, but nothing else happens.
I have been trying to use burnt -R discs and dual layer discs; these discs play on other dvd players. Should my laptop plays these discs? And if so why doesn't it? I believe it still has the original drive in it; I bought the laptop second hand.
I just got BT Infinity and whenever I download something or run speed test (speedtest.com) my computer disconnects from the internet and shortly after connects again. How do i fix this? I am running a dell latitude d600 with windows xp. Before bt infinity i just had a normal bt home hub and that worked fine. I don't think this is happening on other computers connected to the network but i can't be sure. I am using Wi-Fi, not ethernet and i haven't tried connecting via ethernet yet but the hub is in a different room and i cant move anything from room to room because of the set up.
A previous answer i got was to re intall my wireless router. I thought this had worked, but it only suspended the time before the disconnect for about 1 min. Then it just went back to disconnecting straight away again.
I just bought a dell latitude d600 and I have never had a laptop before. Is there a way to tell if it is charging when the ac adapter is plugged in? I bought it for parts or not working and I,m trying to put it back together. I also have been looking for an ide hard drive for the caddy. I didn't know if you could change that to s sata drive or not.
I have a Dell Latitude D600 which i bought a few months ago second hand, It came with charger and thats it. No recovery disk or nothing. Laptop worked perfect and is a really good laptop. However I have so many viruses on my laptop, I have ran all types of AVG's, adware scanners, and much more. Its cleared alot of the viruses but still the laptop is not working properly.
I would like to restore the laptop back to its factory settings, i have backed up all my data on an external harddrive so its all good. I checked on google and it says something about Pressing F11 + Ctrl or something like that and it has a recovery procedure in the laptop allready. I dont think D600 has that feature and guessing i need a recovery disk. I have looked on ebay and cant find any, Im not even sure what type of recovery disk to get because i found a few, prices were ranging from £30-35 and i cant afford that as i am a student.
Is there a way where i can download some sort of recovery software for dell and burn it onto a disk or something, I looked on google but there is no detailed sources telling me about this,
how i can restore my dell latitude D600 back to its brand new settings without having to buy the recovery disk.
i have a number of Dell D600 latitude laptops in the organisation,all identicial. Strange thing is that one of them will not work with the docking station, any Docking station to think of it. this is the error message i get " Your power adapter does not supply enough power to run the attached docking station" press F1 to shut down
There seems to be a bug in the A06 BIOS update for the Latitude D600. The power supply that shipped with the machine is Model AA22850 for the PA-12 family. This power supply charged the battery fine when I received the computer. I updated the BIOS recently to A06 version and then started receiving a BIOS error upon boot up saying that it did not recognize the power supply. I replied to the error message and went into the BIOS setup and sure enough the battery status was not showing as charging. There green charging LED no longer was lit up and upon going into Windows and looking in the Power options in control panel the battery was not showing charging as well.
We happened to have a power supply for a Latitude D800 at the office and I plugged it in and it started charging the battery immediately. I also did not receive a BIOS error on boot either. That power supply is for the PA-10 family and has more current output. Evidently this new A06 BIOS is looking for that power supply. So....I have to get a larger power supply to have my system now charge.Â
i currently have two 1330s... one with LED and one with CCFL
The LED is a toshiba LCD2306, the CCFL an AUO Optronics, the CCFL looks MUCH better which seems to me total nonsense since the LED is supposed to be better in all aspects.
I will be contacting customer service. Should i be asking specifically for the samsung LED?
I was wondering if anyone else has the 128GB Samsung SSD in their Studio XPS 16 and having stuttering issues?. Lately I have been having a lot of stuttering issues in which the mouse cursor freezes up.
Also, anyone running Windows 7 on it? I cant seem to get higher than 5.9 as the HD score under WEI. Anyone got a higher score?
