Let me start by saying I wouldn't normally do something like this to a brand new laptop considering I'm not too good with the back end of computers.. but here's the problem I have.
I got a 320GB notebook hdd from Western Digital (WD3200BEVTRTL) in December but was unable to get it to work in my laptop. It didn't work because the new drive is SATA II and the old laptop SATA controller was SATA I and unfortunately I couldn't dumb-down the new disk to work on that computer .....
I have brought a new dell studio 1435 laptop and they provided me with default windows vista home premiun OS.
I have installed windows XP professional OS after changing the BIOS settings for onboard devices (In BIOS:
Onboard Devices -> Flash Cache Module -> Set Off Onboard Devices -> SATA Operation -> Set ATA)
Can i will be able to install the windows vista OS after installing windows Xp with the same BIOS settings for onboard devices (In BIOS: Onboard Devices -> Flash Cache Module -> Set Off Onboard Devices -> SATA Operation -> Set ATA)
The only option I missed out on was the internal bluetooth.
So I read the Service Manual for the 14z and it doesn't seem like it would be to much trouble to manually install the 365 module. Also I found the 365 internal module on ebay WITH the mounting screws. It seems like a perfect fit.
I have a Studio 17 with Vista Home Premium preinstalled. Im trying to install Vista Ultimate 64 bit, and when I boot from the DVD, it says Loading files, than at the end of that it shows me to screen with the Microsoft bar like its going to load windows, but then I immediately get a blue screen with the error irql not equal to or something like that.
I tried disable the flash cache in the BIOS but it still gets the blue screen as soon as it trys to enter the setup screen.
My BIOS is set to ACHI and I have not changed that.
I wanted to try out the 64 bit Vista and still have my 32 bit on it in case I run into some apps that wont run in 64 bit.
anyone have any idea what I need to do? I have a seperate logical partition that I made for the Vista 64 bit. So I have 2 partitions, a C: partition which has the Vista Home on it that came with this laptop and I was hoping to install the 64 bit onto the D: partition but Im getting the blue screen.
Do I need to do anything with the ACHI setting? I have 4 gigs of ram and would like to use it.
i got the Intel X25-M G2 80GB SSD for Christmas, and i'm looking for some help installing it. Mainly, does anyone know where i can get the hard drive caddy that is apparently needed to install a second drive (my 1747 has just one HDD)?
I ordered a Bluetooth card from Dell for my Studio 17, and I was wondering if anyone has installed one of these yet. I already have the WLAN card installed which is for the WiFi operations and Im wondering how hard of a job it is to install the Bluetooth card.
I already added a second hard drive to my laptop so going inside of it isnt a problem I know what Im doing but have no clue where the Wireless cards are mounted. Im hoping the Bluetooth slot is marked so I know where it goes.
If you're like me, and you bought your Studio 1535, 1536, or 1537 with the standard keyboard and now wish you had the backlit model,
it's an excellent time to buy the keyboard on your own and install it yourself. It's an extremely simple process, involving no more than 4 Philips head screws, three ribbon cables, and ten minutes of your life.
Resaleremarking.net, an excellent parts retailer for Dell notebooks, has the backlit keyboard available for $37.95, which is an excellent price, especially considering it's Grade A, which is brand new. For reference, I bought mine for $50 just a couple months ago.
The part is now cheaper than ever, so what do you have to lose? Replacing the keyboard does not void your warranty with Dell, and is one of the easiest hardware replacements you can make on this laptop.
I have an Inspiron 700m of which I am the original owner. I just ordered a new Hitachi Travelstar 7K100 80GB 7200rpm drive. I have only done one OS install prior to this when I assembled a desktop PC but that was several years ago and I was following an online guide (MySuperPC) virtually step-by-step.
I have contacted Dell and they sent me a reinstall copy of the OS (XP Home) on CD.
My biggest concern is partitioning. I'm really not clear on what this is all about or how I should go about doing this. I've had one person tell me not to partition at all. Another tell me to make it 50%-50% and another tell me to make a 5GB partition just for the OS.
This a basic email, web browsing, document reading type of machine that I use when I'm traveling.
I can follow to install the OS onto my new hard drive? I've seen a few, but they seem to be more geared toward recovery type reinstallations and several seem geared more toward "power users."
Well when I opened up my E1705 to install it, I saw there were only 2 power cords (I dont know what to call the small power cables). Anyways the 4965 has 3 ports for power as you can see in this picture
I upgraded from a Dell 1500 draft N, which has only 2 of those powers, one on the left and right, but not one in the middle like the Intel has
I tried installing it with only the left and right ones, the same way the dell one was installed and it seems to work fine, but the Wifi light blinks like crazy if im ever doing anything (such as gaming, or everytime something is downloading)
I've just inherited my brother's M1210 with Vista Business pre-installed. I was interested in doing a clean install of Windows XP instead. I've done a search on this forum and elsewhere and I'm a little confused.
1. Can I just use an XP install disc I already have for a computer I no longer use? 2. Is there another option other than using my own copy of XP? 3. Do I need to do anything else other than install the XP drivers from the Dell website after installing XP?
I'm trying to get the webcam running but I really don't know how to do so.
I installed the dell webcam manager. If I want to launch the webcam console I get the warning that I have to install the webcam driver first.
Well, I tried to install the webcam driver (located at the M6400 driver section) but this installer only tells me that no webcam manager was found and aborts the installation?
I also don't have any webcam manager cd that is mentioned at other posting about this topic. It wasn't delivered with the notebook.
Windows Vista crashed and the OS disk that was included with the system was corrupt so I had a local company re-install from their disk, however, I did not
supply them with the media direct CD (v3.5 on an Inspiron 1525) because I didn't know that it had to be installed at the same time.
Now I need to (from looking at other threads) partition the disk - will this be done by just running the Media Direct CD and picking option 1?
Or do I have to have the OS disk (which I don't have)? I don't want to pick option 1 until I know that I don't need the OS disk .....
I recently purchased an Inspiron 1318 from Best Buy and while I love it so far, trying to play a few games has been an awful experience. Vista is pretty much useless when it comes to older games, even some games that were released about a year ago. What I would like to do is to dual boot into an XP partition just for playing games. I think my biggest problem will be finding drivers for this notebook that will work on xp. Also, I've never made a dual boot system before, though I have done plenty of installs and reformats.
I received my 7 Pro Disc set this morning. So thumbs up to MS for getting this out so promptly. I've been running nothing but Win 7 on my XPS since it came out in beta form. I love it etc. Fantastic.
My question is in regards to the install process for specifically my laptop. I am doing a clean & 64 install of course.
Where I am unclear, & I've always struggled with Dell in these matters is: Should I be paying any attention to Dells offerings for drivers (I'm talking everything from chipset to Ethernet)
or does Win 7 have better choices upon install? I just ran the Intell driver update tool & my product is "recognized but unknown" so no
im a m1730 user interested in installing Ubuntu on my machine. Ive gone through various Windows OS setups, dual boot and what not, and would like to try Ubuntu.
I downloaded the Live Cd, Ubuntu 8.10 64 bit, and when i boot from it, no matter which option i try (Try Ubuntu, Install Ubuntu, Check Cd, etc), i get a BusyBox command prompt which loops some I/o error. No graphical user interface for installing comes up
I got a 370 bluetooth card and for the life of me I can't figure out how to install it in my Studio 15 even after reading the directions on Dell's website. First of all did they send me the right card it measures something like 1/2" by 1 3/8"?
After taking the back cover off of the laptop there is a pretty big slot marked WPAN with a blue cable ran to that spot held down by a black piece of vinyl. The 370 I got doesn't seem to fit the plug-in connection unless I'm missing something. Also I don't see what would hold the card down because it isn't long enough to reach what looks like 2 screw down posts at the top of the slot.
I've never installed a mini-card before or even seen what they should look like, can anyone verify I have the right card or whether I'm just not smart enough to figure out to install it, I won't be offended if the latter?
I bought a Latitude E6500 one year ago,I am planning to change the internal HD for a SSD HD to gain some speed; since my hardware knowledge is very scarce, I am planning to buy this SSD to host my GNU/Linux:
OCZ Agility-2 SandForce SSD.URL....But I don't even know if my latitude is, I quote, "SATA 2.6 Compliant, 3Gb/s and 1.5Gb/s support".BTW, is it difficult to open the laptop to change the hard disk?
I got it with Vista, I later downgraded to XP using the info in this thread: Installing Windows XP on Dell Inspiron 1520
I searched for Windows 7 on this board and didnt find anything...
So now I ask, how do I install Windows 7 on my laptop? For XP I had to download several drivers, im assuming I need to do the same for Windows 7 but are those drivers out yet?
I purchased CT699854 4GB kit (2GBx2), 200-pin SODIMM from Crucial.com for my Dell Inspiron 1720 laptop. The machine already had 2GB in two 1GB chips for both slots.
When I installed the new chips, Windows Vista Home Premium refused to boot. BIOS recognized the new RAM without problems, but when Windows started to load I immediately got a 0x7b stop error. This is strange, because that usually coincides with an AHCI problem, but that's already turned on in the BIOS with Turbo Memory and works fine.
When I take ONE of those 2GB chips out, leaving an empty DIMM slot, it boots fine. When I use one new 2GB chip in conjunction with one of the old 1GB chips, it boots fine and Vista recognizes 3GB of RAM. But when I push it to 4GB, I get the 0x7b BSoD. I've used all combinations of new and old chips, and it appears the new chips aren't bad as far as I can tell.
I have a dell inspiron 6000 computer and installed Ram into my laptop. The thing was i tried to push it in and it would not go in. I then later saw there was a spot where u can push the ram in and eventually got it in. I did use lot of force pushing it in.
When i open my laptop, it opens but the screen is black and then turns off in like 7 seconds. I then took out the new ram and installed the old ram. It still has the same problem. Does that mean my laptop does not work anymore? Does it also mean i cannot return my RAM to the online site where i purchased my ram since theres a 30 day policy?
I've found out there's newer drivers for my Studio laptop for webcam, wireless, etc.
I updated the BIOS and it went fine. My question is do I have to uninstall current driver before installing new one? On Dell web site, they only give general instructions and don't mention this.
If I install new driver over the old one, will I have 2 versions and can go back (in device manager) if the new driver doesn't work as well
I decided to reformat and reinstall windows, mainly because I was having a few harddrive issues... my internal cdrom doesn't work, so I've been using an external cdrom for as long as I can remember.. Anyway, I reformatted the harddrive, not knowing that usb cdrom drives arent detected without windows(I could've sworn that I've done it before)...
Anyway, now I'm stuck with an empty laptop, and I'm not quite sure how to go about installing the os... I'm probably going to get a cdrom soon, but I can't really do that at this point. I was wondering if there's an alternative way in doing this.. I do have access to a desktop computer, and I do have a usb floppy driver and a usb cdrom drive.. (laptop detects the floppy drive just fine)...
