Dell Vostro 3360 :: Windows Reinstall - Installer Can't Find Any Drives
Jan 6, 2015
I've got a Dell Vostro 3360 laptop, with a 500gb HDD + 32gb SSD (hybrid) and a pre-installed Windows 8.1. My problem is the following: I've tried to re-install the OS (windows 7 x64) but the installer can't find any drives. I've googled the problem and found this topic: [URL] .....
It says:
1. Ensure Sata mode is set to RAID in BIOS or in some systems Intel Smart Response Technology
2. Go to RAID BIOS(Use Ctrl+I) and disable accelerate option for SSD (Only if HDDs are not detected while OSRI)
My raid setting is ISRT, but I can't enter the raid bios, cause CTRL+ I does nothing. I also tried CTRL + R and G but neither worked. How to reinstall the OS?
View 2 Replies
ADVERTISEMENT
Feb 28, 2013
Recently I have purchased a DELL XPS 15 (L521X) but I am not able to install windows 8 pro on it as the installer could not find the hard disk and keep continuously ask for the driver.
View 15 Replies
View Related
Feb 9, 2013
I got a new Vostro 3360 with the i7, 8GB of RAM, a 500GB 5400 RPM HDD and a 32GB mSata SSD drive which was used to cache the HDD with the Intel Smart Response Technology. Unfortunately, the computer also came with Windows 8, which is useless for me, so I'm trying to install Ubuntu 12.04 on it.
Now, I managed to overcome many issues so far; I got the Secure Boot turned off, unchained the HDD and the SSD, turned the raid flag off for both, and managed to repartition the SSD so that I could install the Ubuntu system on it. However, I can't see to be able to boot from the ssd no matter what I do. It shows in the BIOS as present, but I don't have it as a boot option. I tried installing the system and keeping the GRUB bootloader on the HDD, that didn't work either.
This is supposed to be my new work computer and trying to get the installation to work is eating up a lot of time...
View 1 Replies
View Related
Feb 6, 2013
I just bought a Vostro 3360 with Win 8.
I created a new partition using Win 8 Disk Management Tool (as shown here [URL] ..... )
When i turned it on again, i saw a message about a failure shutting down the OS. And now i can't start it because it can't fin Operating System. How can i restore it to factory settings?
View 7 Replies
View Related
Feb 21, 2013
I just bought my new Dell Vostro 3360. That's was nice that everything works out of the box, but I deleted whole disk and installed newest ubuntu 12.10.
And there starts problems - 2 nights trying to get wifi but without results.
So there is possibility to get original image or how to get wifi under ubuntu 12.10 (32.bit) ?
View 3 Replies
View Related
Feb 3, 2013
My Dell Vostro 3450 (windows 7) had been running slowly for a while and after a virus scan didn't work, I decided to reinstall my operating system. I used the OS reinstall disk that came with the computer and that seemed to work pretty well. However, when it came time to install the drivers, I hit a roadblock. I put in the drivers disk and tried to go through the list of what drivers to install first (DSS, then chipset, etc...) but each time I installed something, it didn't seem to do anything-- I would go through the whole process for each one, but the little check mark wouldn't appear next to it in the "My System" list.... See below:
My computer can't connect to the internet either by ethernet or wifi, and can only input info through the cd drive.
View 5 Replies
View Related
Feb 7, 2013
I've found that these buttons don't work anymore. Previously they worked properly but last week I've found that any of them does not work.
When I press each of them there is no any action: no action, no dialog window, no backlighting, nothing. I don't know what is it.OS: Windows 7 x64 SP1 with the latest updates.Other info: during my using of this laptop I have not had any damage or falling.
View 11 Replies
View Related
Dec 24, 2012
I have a Dell vostro 3360, I installed window 8 , I also installed driver for sensor finger but can't use it. What need I do to get it working....
View 7 Replies
View Related
Mar 24, 2013
I get my new "Vostro 3360" and I needed to do "roll back" to factory settings but I had some problem:
- I tried to do a "recover / estore" but there was nothing in the list - I already installed the laptop also installed many programs (e.g: office, winscp, irfanview etc.)
- I tried to go through the "help center" on the laptop and same issue - nothing, all empty
- I even try to reinstall from the disk I got with the laptop BUT it didn't found my hard disks... so basically, my question is how can I install the laptop from the included windows 8 cd that I got?
I just want to reinstall my laptop like it was as I got it from the factory
View 7 Replies
View Related
Feb 19, 2013
I got a brand new VOSTRO 3660 with x3 USB 3.0, and since it has no CD/DVD my only option of creating Factory Recovery Image with DataSafe is thrught USB
which is USB 3.0.
I have done some digging before posting, and I understood that I had to enter to the bios and change USB debug Mode to Enable in order to make it work as USB 2.0 (Disable USB 3.0 functionality to install Windows 7 from a USB Flash Drive).
thing is that I tried that several thing to recover the windows 7, deleted the usb flash drive and made several copies and in the end of it I always get to a screen which tells me that "if you are trying to restore your pc from usb 3.0 ................change to a different usb port " .
View 2 Replies
View Related
Apr 8, 2013
I have strange quirks with caps led indicator and brightness keys: they work just after power on, in grub menu but they cease to work after operation system boots to graphical environment.
Caps lock itself is working fine: just indicator don't light up. Brightness control itself is working also: I can configure brightness if I map other buttons. Just function keys don't work. I've tested it on opensuse 12.3 kde and gnome running 3.7 kernel: both are affected. Opensuse 12.2 with previous kernel didn't have such quirks. What causes this quirks.
View 1 Replies
View Related
Dec 30, 2014
My dell Vsotro 3360 will no longer boot up. It gives a 2 beep error on start up and nothering comes on the screen.
View 1 Replies
View Related
Mar 23, 2009
i have recently formatted my hard drive and installed cean copy of Vista Ultilate on my DELL Inspiron 1525 machine. I did not use dell recovery partion to install, instead i use Vista Disk.
I was able to install all the drivers except bluetooth. Whenever i try to to install bluetooth drivers i get following error " The installer be run on windows vista only"..
i was with dell tech support for couple of hours but they were not able to solve my problem. The bluetooth is enabled in BIOS, switch is on etc.
View 5 Replies
View Related
Jan 19, 2009
tried to reinstall XP on my 1705; XP had intall errors; now Windows Installer wont work, half the language in XP operating system appears to be Farsii,
and all drivers are gone; Internet Explorer wont run (takes me to properties page); best way to fix?
View 5 Replies
View Related
May 6, 2014
When I install software on my new Yoga 2 Pro, in some cases the installer window is small and won't maximize. It doesn't matter if the the program is old or new. This only seems to show up on the installer in widows.
Windows 8.1
View 2 Replies
View Related
Jun 24, 2014
MY laptop is a HP Pavillion dv5 1223TX, I was having issues so I did a factory reset via recovery manager, I have installed as many Windows updates as it has allowed, I am trying to download software that I was using before reset, like iTunes, Java etc, but I keep getting an error 'The windows installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed' I have tried various downloads to rectify this but to no avail.
View 9 Replies
View Related
Jan 17, 2009
I have two seperate questions to ask, so will post them seperately.
I have a Vostro 1700 with a 250gb drive in it. When I bought it I had a problem with the laptop and managed to get a hard drive caddy free from Dell, so just need the drive. I know it needs to be a SATA 2.5 drive, but will any drive fit, or do I need to go for any specific ones? Is the Vostro SataII?
View 10 Replies
View Related
Jan 24, 2010
My wife has a 3-year old Vostro 1500 running Xp Pro, Sp3, and it was somewhat messed up (wouldn't accept Windows updates, the Firewall stopped working, and couldn't be turned on even with administrative tools, stopped being accessible on the network, etc.).
So, I backed up everything 3 times, including a drive image, and wanted to reinstall XP using the Dell XP SP2 disk.
I removed the Dell Mediacenter partition, but left the first (small) partition. I reformatted the remaining partition as NTFS, and installed XP. Despite the fact that the Dell disk contained the SATA drivers, when I looked in Device Manager, I found that the HD was seen as an IDE drive, and not a SATA drive .......
View 5 Replies
View Related
Mar 14, 2013
I am unable to find the ethernet driver for the Vostro 1000 laptop. I found the wireless drivers and all other drivers for the computer.
View 1 Replies
View Related
Dec 31, 2009
I have an Acer 5610-4610 system. It was repartitioned to one XP drive for several years. I am finally wanting to put the PQ service partition back on it but none of the folders of the restore CD's have any of the files needed to recreate this partition. I am wanting to put the factory (VISTA Home Premium) system on C. With all the system files and folders from the 3 restore CD's into the PQSERVICE partition. I have no clue how to proceed.
I do remember there was an acer(C) partition and a data (D) partition when I got it. The PQSERVICE partition was there back then.
The first (System) CD has none of the files mbrwrdos.exe or rtmbr.bin
used to create the PQSERVICE system.
I run the ACER Disk Formatter and it cannot find any drives on the laptop.
Weird! From what I've been able to glean my thought was that that the Formatter disk would facilitate creating the correct partitions?
View 7 Replies
View Related
May 11, 2010
Which drive will the envy 17 come with and which drive performs better? These are the only 2 2.5" 1TB drives i see released as of now.
View 5 Replies
View Related
Sep 28, 2009
Has anyone tried one of the netbook mini PCI SSD drives in an inspriron?
How about the regular SSD drives? I have a 1525 I am considering updating a smidge .....
View 3 Replies
View Related
Dec 20, 2013
When i bought my laptop it have windows 8 but i disliked it and have many bugs on my games so i installed windows 7
and complete delete everything in my harddisk. I couldn't find product keys anyway packet , laptop etc.
My laptop is pavilion g6 2255eo
View 1 Replies
View Related
Nov 10, 2008
i want to uninstall everything that is i want to ununistall the OS VISTA thus replacing it with WINDOWS XP.
But unfornately i have failed to install OS (XP) on my laptop which came with pre-installed Windows Vista. I not been able , but when i boot my lapto using Windows XP CD it copies the required files but when i press ENTER to install Windows XP the message appears that " Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer and that any disk related hardware configuration is correct. This may involve running a manufacture supplied diagnostic or setup program. Setup cannot continue. To quit setup, press F3." Please note I have C: drive installed windows vista on it, i have drive D: files are available for recovery disk pre-installed by the windows vista or manufacturer. My lapto is ACER MODEL 4320. Please advise how to install how to install the operating system on this computer.
View 5 Replies
View Related
Mar 5, 2013
I upgraded from windows 7 to windows 8 just a few days back. Since the upgrade, I'm not able to access any of my USB pendrives and flashdrives after plugging them in the hub. The oc just does not read them. The light on pen drives glows for 1 second and then goes off.
View 1 Replies
View Related
Jul 21, 2013
I am running Windows 8, and i followed a tutorial on hp forums to get sound enhancements to work, it told me to unistall my current idt driver and download a newer one. So i did and it works great until it says the hardware detected is not supported by this idt software package. I have a pavilion g6 with 8 gig ram and i5 proccesor.
View 2 Replies
View Related
Jan 30, 2010
I just recieved my new Studio 17. I noticed that there's a lot of trial software on it that I don't want.
Also, I want to partition the drive.
I know that there's a recovery partition on the HD. If I partition and reinstall, will the recovery partition still be there. Will it still work down the road if I need it?
Also, if I reinstall Windows 7 and the drivers and utilities, will it be the same as what I have now?
View 9 Replies
View Related
Nov 10, 2009
I finally fixed all my problems (kinda) I have sound, wireless card, can go stadby hibernate, ethernet device works etc etc, Don't know how I did it because I went to so many different sites and google it thousand times!!!
I've noticed that sometimes you can't get the right drivers from dell even with the service tag number, I got some drivers from dell, but not from my specific model drivers download page!
The only problem I have now is that my hotkey: fn+esc don't work, it doesn't put my computer into standby like it should, the other hotkeys work just fine, Anyone know why? I also would like to get an older version of quickset because the new version that I got now I don't like it, its 7.1.8, I've been looking for the version that came with my computer from the factory but I don't know what version is! I liked that one better.
View 3 Replies
View Related
Feb 19, 2009
i'm thinking about selling my Dell Mini 9 and i would like to know how to format my SSD and reinstall Windows XP Home so it is all fresh and new for it's new user
View 8 Replies
View Related
Mar 4, 2013
I am trying to format my C drive and have a fresh installation of the operating system on my Inspiron 1460, which I bought 3 years back. Steps that I am following:
1. Insert Re-installation DVD for Windows 7 Home, provided by Dell
2. Power off machine
3. Power on machine
4. While it is starting press F12, and select CD/DVD and press Enter
5. "press any to key read from cd/dvd" appears, press Enter
6. System boots up
7. Install now button appears, click it
After this it is asking for a driver cd/location to install. I have a driver software cd which is also not recognized.
View 1 Replies
View Related
