I just received my XPS 15 and plan on dual-booting Win 7 and Ubuntu. I'm trying to install both, but I have no disk drive boot option in UEFI mode, only in legacy mode.
How can I boot from a disk using UEFI mode?
Recently I have purchased a DELL XPS 15 (L521X) but I am not able to install windows 8 pro on it as the installer could not find the hard disk and keep continuously ask for the driver.
View 15 Replies View RelatedI have just purchased a Dell Inspiron 17R Special Edition 7720. It came with a preinstalled Windows 8 (so 64-bit and mandatory UEFI boot). I want to use Linux (more specifically, Archlinux) for work and Windows for games, so dual boot is needed.
I almost completed the Linux installation except for the bootloader: I need to boot Linux from UEFI and didn't manage to do it so far. Here is what I did after I received the PC:
-Disabled Secure Boot; updated BIOS to version A12
-Resized the main Windows partition and created a few partitions for Linux;
-Switched to legacy boot mode and managed to boot a MBR-bootable Arch linux installation USB drive;
-Installed most of the system switched back to UEFI boot mode, Secure Boot off.
At this time I needed to boot the kernel from UEFI for the bootloader installation program to have mandatory access to the EFI environment variables. So I created an UEFI-bootable Archlinux installation USB drive (with a FAT partition) but so far I couldn't manage to successfully boot this drive from UEFI instead of Windows 8.
I think I really tried every single combination, such as:
different USB ports; different boot entries created with F2 boot setup, with different parameters; different orders for the boot entries; hit my boot entries directly within F12 boot menu.
No matter what, in UEFI mode the system always boots the Windows partition.
Also, I could not find any relevant manual or software documentation about the A12 BIOS on the Dell site, did I miss something?
The solution that the user described in this thread to UEFI-boot to a DVD did not work for me with a USB drive.
I've finally managed to find someone to replace my optical drive with an SSD (wouldn't want to void the warranty, do we?) and I've got quite bit of a problem here. After installing Windows 8 on the SSD, I get the error "winload.exe missing or corrupted" and error code 0xc000000e. The installer automatically put the boot data on the original HDD, while the OS is on the SSD - and it seems the UEFI can't find the OS like this.
The OS itself seems to be intact, since pressing F12 at booting and selecting Hard Drive starts the computer normally.
I've tried to move the boot sector to the SSD, but it seems I'm missing something... Would a BIOS update maybe work with this?
I received my Dell Inspiron 15R - 5520 laptop and am attempting to set it up to perform a UEFI boot to a Windows 7 (64 bit) installation. I am using bios version A11 which is the latest available.
If I use legacy, I am able to boot fine to the Installation DVD and install/use the system. If I use UEFI (non-secure boot), it will freeze during the boot process for a long period of time. I do not ever get to the GUI to attempt installation. I have tried clearing the disk partitions using diskpart -> clean to ensure it is not due to having GPT vs MBR and have also tried changing the SATA adapter to ATA vs AHCI.
Alternately, I am able to boot to, and install Windows 8 RTM in UEFI mode.
Before I get a lot of responses of "Don't use UEFI", the reason I purchased this laptop was for the purpose of dual booting between windows 8 and windows 7 for development purposes, and require the use of secureboot to properly test the software I am developing. If this laptop is not able to run Windows 7 in UEFI mode, I will need to return it and select an alternate vendor.
My dell laptop is dell inspiron 14R with preinstalled windows 8.I want to install ubuntu 10.04 side by side. I switch to legacy boot option too.But could not install it through disk since during partition table creation, it is not showing any os that is preinstalled.Its imp for me to install ubuntu.
View 2 Replies View RelatedMy notebook model is HP PAVILION 15-n205tx
Click here for product details
My notebook pc is installed with Windows 8.1 and i would like to dual boot it with Windows 7 using a cd but when i try it ,there is an error saying windows cannot be installed in the selected partitions as it is of GPT format.
How to dual boot my pc.
Hp envy 6 sleekbook 6z 1100
I have already disable the secure boot in the BIOS
But I still cannot install the ubuntu 13.04
The installation was good and smooth
But after reboot, there is no boot menu appear for me to choose which OS I want to boot
I wonder if HP locked something......... or should I turn on Legacy support in the BIOS? But ubuntu 13.04 should support EFL BIOS
I need Ubuntu for work!
Dell Inspiron 15Z model 5523 laptop less than 2 years old. Locked up during a Windows update. Refreshed it and lost all my programs. Downloaded Firefox accidentally from a bad site and it was bundled with malware. So I refreshed the laptop again. Had everything working and then later that day it just quit. Locked up and when I rebooted, it said no hard drive could be found. I have a new hard drive, but how do I get my Windows 8 (paid for with the computer) and a boot disk from Dell?
View 1 Replies View RelatedWhere is Boot from USB option in UEFI boot device list in Inspiron 17r SE?
Mine only shows Network in UEFI boot list?
Everyone: Absolutely cannot boot from CD-DVD even if I turn OFF Secure Boot and UEFI and my machine lists my CD-DVD as a boot option. When I then try to boot from the CD-DVD, I get an error message. (Optiplex 7010 Mini-Tower with Win 8 Pro 64-bit, an Intel i5 3470 processor, 8 GB RAM and 500 GB hard drive. It has BIOS version A16 right now.)
I started a thread on this issue in Desktop Hardware Forum - [URL]...
Will N5110 support UEFI boot mode and when?
View 1 Replies View RelatedI'm having getting my USB stick recognized as a bootable device (installing windows 7 onto a system that came with windows 8.1 pre-installed, no optical drive)
System: Acer E 15 (E5-571), BIOS V1.15 (UEFI)
What I've tried:-Disabled Secure Boot
-Created bootable USB stick with Windows 7 iso, via 'Microsoft USB/DVD Download Tool' (on alternate Windows 7 system)
-Created bootable USB stick with Windows 7 iso, via 'Rufus' (on alternate Windows 7 system)
-Windows 8.1 Advanced Restart -> Boot from UEFI USB Device (No UEFI device recognized)
What worked:-Enabling 'Legacy Boot Mode': USB stick was recognized upon boot and loaded Windows Installation. HOWEVER, Windows 7 won't instal to a GPT formatted drive under Legacy Boot Mode. I've read booting in UEFI mode is the only way to get Windows 7 to install onto GPT.
What I don't want to do:-Format the drive, change drive mode to MBR to instal Windows 7. Why? Because then I'd loose the factory installation of Windows 8.1
I have a new dell latitude 6510 notebook and now i will install Windows 7 Pro 32 Bit again. When selected "Boot List Option" under bios settings i see legacy and uefi but i can´t "Add Boot Options" - Warning "File System not Found". Windows 7 Pro 32 Bit is installed and working under legacy but not working on uefi. When uefi selcted windows 7 pro 32 Bit is installed and when installation is finish can´t find bootable device.
View 2 Replies View RelatedI rebuilt my new XPS 15 with Windows 7. I didn't build any recovery media before I wiped the hard drive. Where can I download the recovery tools to restore to factory build ?
View 1 Replies View RelatedI've got a XPS 15 L521x that was running Windows 7 for weeks with out incident. I decided I'd like to try Windows 8. I installed (after changing Sata to AHCI) without incident. After the install completes I reboot and it crashes. The OS goes to "attempting repairs". I can run a "refresh" of the OS and it will fix the issue and then crash again after a reboot.
View 10 Replies View RelatedMy Lenovo U430 touch came with a Samsung 128GB SSD. Since it was becoming a little on the small side, I decided to replace it with a Samsung EVO 250GB SSD.
My first thought was to clone the old SSD and then resize the partitions afterwards. I quickly ran into trouble, the cloning didn't work out. So I decided to begin from scratch. So I installed the new SSD and installed a bare Windows 8.1 Pro install.
Although everythings works one thing is still bugging me. For the new Samsung SSD to be bootable I must:
- Disable Secure Boot
- Enable Legacy booting
I thought all the necessary codes were a BIOS / OS thing?
Lenovo G570 have a UEFI? If yes then how I can to make the UEFI boot by default?
View 3 Replies View RelatedYesterday I flashed the firmware of my XPS L702X to version A19, which enabled UEFI boot mode. I decided to go ahead and try to install Windows 7 in UEFI mode on a GPT disk. Installation succeeded, booting failed however. Then I read a message on the web from someone who succesfully installed Windows 8 on the same machine in UEFI boot mode on a GPT disk. So I decided to try Windows 8 instead. Installation failed. Using the recovery menu from the Windows 8 installation media, I wanted to try and see how far installation had come and more or less accidentally selected in some "Advanced options" menu to reboot to my USB flash drive (where the Windows 8 files were on). Rebooted fine. Then I shutdown, using the regular option.
When I turned on my machine again, I found out that pressing either F2 or F12, for the firmware setup and the boot menu, respectively, didn't work anymore. The firmware recognised my input, as the text in the lower right of the Dell splash screen became lighter, but instead of entering setup or the boot menu went straight ahead to boot my existing and working Windows 7 installation on my first (MBR) hard drive instead.
So, in short, I am locked out of setup and the boot menu. I have already tried reflashing the firmware, but without any luck. What to do now?
I'm trying to install Ubuntu on an e6530. I changed a BIOS boot setting from Legacy to UEFI. Now the laptop doesn't even show me a BIOS screen at startup. The screen is backlit, so power is on, but shows nothing. The drive light flickers a few times, but no matter how long I wait, nothing appears.
I can't even switch it back to Legacy because I can't get into the BIOS. Hitting F12 after power on does nothing. Is there some way to get it back to Legacy mode? Or simply reset the BIOS to default settings?
Im having problems trying to find a decent guide on how to do this,(Most of them are outdated and what not) but I want to have the ability to use Ubuntu and OSX.
I currently have Ubuntu in Virtual Box, but I would like for my whole system to be able to switch from OSX and Ubuntu and boot or w/e.
Also, I have Ubuntu saved on my external HD iso file. So will I need to actually burn it to disk?
I also read that you can use bootcamp to do this.
So whats the easiest way to do this without having to reinstall osx(if I really dont have to)
I'm in the process of upgrading my L521X/XPS 15 to Windows 8. The A09 BIOS introduced UEFI booting, which I of course intend to use. However, I can't get Windows installed when Smart Response is activated in the BIOS. The installer simply doesn't show any disks - even when loading the correct drivers. Changing to AHCI allows me to install - but of course without the benefit of Smart Response. Now, the question is: is it possible to use pure UEFI and Intel Smart Response Technology on the L521X?
View 2 Replies View RelatedI'm trying ubuntu from USB (also tried linux Mint) but I can't boot from the USB, I always get "operating system not found" error.
I tried booting with F12 and choosing USB, tried to change boot order in bios and set USB 1st but nothing works. What else can I do ? The usb is bootable so the problem is with the laptop/bios.
It has been known that HP has dropped the development of QuickPlay Direct due to compatibility issue.
For old model of Pavillion (before dv x5xx) that shipped with Vista as OS, HP did not include QuickPlay direct features anymore.
However, if you have managed to download QuickPlay Direct 2.3, you still can install QuickPlay Direct. In some models, a registry hacked was needed to install QuickPlay Windows and QuickPlay Direct. Some models of Presario that have QuickPlay button may also install QuickPlay.
For Pavillion models dv x5xx and above, installing QuickPlay Direct 2.3 would give you BSOD due to ICH8 sata driver.
I recently bought the last model of dv2700 series, dv2922tx, I prefer this old model instead of dv4 for some personal reasons. In this model, I did some try and error attempts to utilize QuickPlay button.............
I have a Acer Aspire E5-511P with bios Insydeh20. On UEFI it does boot USB-drive, even with passwords set. It boots on USB-drive with legacy set, but now my Wifi doesn't work. On older laptops no issues with UEFI, I just had to set boot order. And Wifi works just fine.
View 3 Replies View RelatedI got this laptop a few days ago, I currently have 7 and XP installed on it and kind of have vista...(read further down).
My 7 seemed to break today after playing around with a program called powerstrip trying to get my external monitor to show the right resolution (I've realised now the cable vga was broke, but meh) but this is not the full problem, after windows 7 failed to boot I tried to boot xp after turning it off during the windows 7 splash screen and now im stuck with a dash when I turn the laptop on (I dont know if its actully related to something I've done or not).
If I turn the laptop on a flashing dash comes on in the top right, it then stops flashing and turns into a none flashing dash further up the screen and just locks here and I cant do anything at all other than trying to restart it. When I had this problem previously (at least I think this problem) on my desktop it usualy turned out to be something usb related but I have everything unplugged (all though the bluetooth adapter light is on when it is doing this) so I realy dont know what to do...............
I bought a ThinkPad 540p that comes with preloaded Windows 8.1. As I want to dual boot the machine I tried to select the Legacy Boot option in the BIOS/Startup tab, but I can't do anything as the option UEFI/Legacy Book is greyed out and locked in "UEFI Only". Below it there is an option called: -CSM Support that is also greyed out and selected as [No]. (below these options there is a little note with an asterisk saying "Unselectable for Secure Boot").
How can I enable the UEFI/Legacy Boot option again in order to dual boot the computer? I want to be able to boot from USB or from the CD Drive.
I have a HP 15 Notebook PC with no dvd drive recently I was sent the system recovery cds from HP. I dont have an external dvd drive. What i do have is a Toshiba Satelight laptop with Widows 7 and a good dvd drive. Also I have a 500 GB external hard drive. I was thinking maybe I could copy the disks onto the external harddrive with the Toshiba dvd drive. Then attach the external hard drive to my HP 15 Notebook by usb port and install Hp recovey disks from the external hard drive.
View 2 Replies View RelatedI am so tired of receiving Low Disk Space on recovery (D). I have done everything it asked. Empty Recycle Bin which is EMPTY. I am not a computer wizard but it seems unfair that I have pay over $150.00 year to correct this problem once a year. I have checked a lot of places and it just keeps telling me the same thing. That doesn't work.
I did just install a HP wireless printer 3052A
HP Pavilion dv6000
Windows Vista (home version)
I have a DV3Z with a slot-load DVD drive.
I somehow messed up my Windows 7 installation and get a BSOD every time I try to boot into Win7 or even safe mode from the hard drive.
However, what I can NOT figure out is how to EJECT the disc in the drive.
I can get to a command prompt via the Startup Repair advanced options, but there doesn't appear to be a command to eject in the disc.
Is there a keyboard combination I can press at power on to eject the disc?