The DVD RW Drive in my XPS will not accept blank CD-R discs...I have not tried other formats eg. DVD-R. I ran the Dell self-inspection test. All passed except those for this drive. The message reported was 'unsupported'. I reran the same test and obtained the same result.
View 2 RepliesI Have a vostro 1510 Laptop. when I wanted to clear the BIOS password, at the "new password" part, I dont enter enything and save it.after restart the computer not accept the old password nor accept the new password (blanks).
View 3 Replies View Relatedhope someone can help me here. Every time i turn on my laptop all i am getting is a blank screen on my laptop and my external monitor.
i am thinking of replacing the motherboard as the graphics card is aparrently soldered to it.Before i do this could the problem be any thing other than the card? I tried running dells screen diagnostic using the beep sound but there are no sounds at all and i cannot see any warnings or errors as all i have is blank screens.
Also if i change the motherboard when i switch it back on will i have video output straight away or will i have to configure anything first?
I have an HP laptop (pavilion dv7-1245dx) and the hard drive died. I had never gotten around to burning my recovery discs, so I ordered new ones from HP. When I installed the new hard drive and popped in the operating system recovery disc, it gave me the error message:
Â
"This PC is not supported by the System Recovery Discs. You will not be able to continue to recover this system with these discs."
Â
Error code: 0100-30FC-3602-3603
Â
The original hard drive was a Hitachi, 320 GB SATA
The new hard drive is a WD 500 GB SATA
The hard drive on my Pavilion 4070-us crashed, so I bought a replacement drive - a Samsung SSD 850 EVO, 256GB. Â The problem is that I can't seem to get the recovery discs to work, and neither Microsoft or HP support me. Microsoft of course tells me that they won't support for OEM versions of Windows 7, and HP said that my product has been discontinued. I own a legal copy of Windows 7....
Â
What happens after I go through the installation process with the recovery discs is that instead of the Windows installation continuing like it's supposed to, I get "No bootable device -- insert boot disk and press any key". Â I'm desperate, I tried two different options - one was the minimal image recovery, the other one was a factory restore. Nothing seems to work. What can I do? Â By the way, the original hard drive is not *completely* dead - I can still access most of the data on it.
I have Acer Aspire 5742G notebook and I'm having problems installing the Windows 7 OS on my new SSD hard drive (I bought the SSD because the original hard drive is failing and making blue screens all the time...)For the factory restore, I'm using restore discs. I burned the discs few years back when the laptop insisted me of doing it (by using eRecovery or something, 3 dvds total).
Â
The computer tries to install the OS with the dvds (asks to insert a dvd and then press a key). The actual problem is that the installer is just going in loops, restarting and eventually freezing in the end.. Reboot -> Acer logo -> Windows is loading files... -> Starting windows -> Reboot -> etc.That kept going for more than a hour (on the first dvd!) and suddenly it just froze on the "starting windows" screen.. So I had to reboot and star over again.I can still use my old formatted HDD, should I make new set of recovery discs or use an USB drive?
Inserted blank DVD to back up files.
Drive makes a noise then posts no CD or DVD inserted, although there is one there.
It will read both types of disc with data on them, but is totally unaware of blank media.
If I check the properties of the drive it shows the disc is full, even if it has already informed me of no disc inserted although there is one there..
Have tried the diagnostic software from Dell but does not flag any faults.
I had been having some monitor distortion issues on my Dell XPS m1210 so yesterday I downloaded the nVidia GeForce Go 7400 from the Dell support website. Now I have even bigger issues. Upon restarting, I was left with a black screen and am not able to do anything. I don't even get a Dell screen to try launching the F8 or F12 tools at startup. The hard drive light is on and the notebook sounds ok but the screen is blank.
I tried to get to the diagnostic tools by using the CD and no luck that route either. I also read that I could try reinstalling Vista. Is that my only other option at this point?
if there is a blank you can replace the optical drive with in the SR series. Preferably a part that is sold by Sony themselves. I hardly use my DVD drive and having it power on and then off each time I bring the notebook out of standby drains battery. I also intend to reduce the weight of the SR by removing the optical drive.
With my old Thinkpad, I was able to remove the optical drive and replace it with a blank fairly easily. I think Lenovo calls it a "travel blank."
New Studio 17, Vista64. I'm in the process of loading all my software. During the first few discs, I sometimes had problems getting the CD to eject.
Several times I had to reboot the computer to get the CD out (the eject button would work fine after reboot).
Now I can't get the computer to take in a CD. I can force it in almost all the way, but I don't want to go any further, or might not be able to get it out.
Is there a manual load and/or eject on these machines
Dell :: Does the Inspiron 9400 accept 2GB RAM sticks? ....
View 15 Replies View RelatedAfter a short period of use my xps13 first edition ceases to accept keypad inputs. I just get a ping and nothing happens. Called premium tech support and not solved. Ticket still open and machine still useless. Pity as after having had so many dell products, what should have the "wow" factor has the "whoops" factor. I have resorted to an external keyboard, but that is hardly the elegant nor portable solution for which one had hoped.
View 1 Replies View RelatedMy XPS L501x does not accept the 130W charger from Dell.
The original charger (90W) was broken, so I bought a new 130W charger (Art-Nr. 450-12071).
With this 130W charger connected, the BIOS says "Unknow device installed".
When I use an old 60W charger (Inspiron 6000) then the BIOS says something about a "60W AC ..."
I have already installed the current BIOS version A08 !
So, what can I do to repair my system. The L501x will not not recharge the battery with any of the chargers.
Tried a G.Skill 4GB module in the M1330 this evening.
It is not recognized in slot A or B. This was tested with BIOS A08 and A12. This unit was purchased in March 2008.
It's a no go for this model it seems.
I've got an e1705, configured with an ATI x1400.
I bought the nVidia GeForce GO 7900GS to upgrade.
After installing, I get these blocks and pixels during boot (see photo below)
Vista begins to load but never makes it to the logo or login screens. I get a blue Memory Dump message for a split second and then the system reboots.
I reinstalled the x1400 after this happened. I ordered a replacement for the 7900GS but the replacement has the same problem.
This obviously isn't a driver problem since it happens during POST, before any drivers are even loaded.
why this would happen with two different 7900GS cards?
For the record, I'm a Dell Certified technician for the Inspiron series.
I'm having some trouble with my laptop, for some reason it is able to pick up blank CD's but not blank DVD's,
View 10 Replies View RelatedI want to upgrade the RAM of my laptop, but before I buy a second card, I wanted to make sure that the computer would be compatible with it. I opened it up to access the RAM, but when I tried to put the card that was already installed into the second slot, it wouldn't fit. It appears to be the right size, but it will not fit in the slot.
View 7 Replies View RelatedI'm having an issue with my 6 month old Dell XPS M1530. I have 3 gigs of RAM, and got everything else standard. So while burning a disc with iTunes, iTunes froze for a very long time.
I tried ejecting the disc; it made a lot of noise and eventually came out.
Since then, my CD/DVD drive no longer recognizes anything I put in. It simply says upon inserting a CD, "Please insert a disc in E:" and is pompous enough to eject the disc that is already in it.
If I double click or attempt to explore the drive with a disc already in it, it will sometimes get stuck in some kind of loop where it makes a funny noise every 2 seconds or so, and kind of locks up the computer until I eject it.
I have just bought the above laptop and gone through the setup. I've only input 2 passwords, both of which I've written down and it appeared to have set up okay. Unfortunately, the laptop lid got shut down and it won't accept either of the passwords I've written down.
View 2 Replies View RelatedEverything was working fine until lately I noticed that during the BIOS the loading bar stops 4/5 of the way for around 10 seconds,
then I hear the slot load drive turn on and only then my computer boots up .....
Intel® Core™ 2 Duo Processor T8300 (2.4GHz/800Mhz FSB, 3MB Cache)
4GB Shared Dual Channel DDR2 SDRAM at 667MHz (2 Dimms)
High Resolution, glossy widescreen 15.4 inch LED LCD
256MB NVIDIA® GeForce® 8600M GT
320GB 5400rpm SATA Hard Drive
Yesterday I ordered this Computer. I have been reading a few posts about the 7200RPM Hard drive and decided to look at my order to see if this was an option. It seems today the computer is 100.00 cheaper and there are more options. [I ordered through a Dell partner purchase program so the options were a bit different then the regular site]
I would like to know which is better :
Full Hi Definition, glossy widescreen 15.4 inch LCD (1920x1200) & 2.0 M
Hey something really weird happened to my m1530 computer. My TEAC DVD+-RW
DDVW28SLC no longer reads any CDR/W discs! It reads DVD's and CD's fine.
I've tested a couple CDR discs that work on my friend's computer but not mine. Anybody ever experience this before .....
I did a lot of research already but nothing seems to work . I have a 320 gig 7200rpm hard rive on the xps m1530 and the noise is pretty anoying,
I already changed the bios settings to performance, downloaded the latest driver update and when I install it I get two files that pretty much contain nothing,
I already burned a CD with the ISO file but nothing comes up, just shows up as a blank CD, I tried going to the Device Manager option and update the driver there but it didn't work either.
I found a topic discussing the latest patch R206837 for the hard drive and some users had the same problem but they never replied and said how they fixed it,
I have been having some problems with my slot-load drive (TEAC DVW-28SLC). It has been coastering a lot of DVD-DL disks lately and overall it is very slow. I have been reading that they are putting faster drives in the newer M1530's. After a long battle with XPS support, I convinced them to replace the drive. Do you think I will get one of the faster drives or will I be stuck with the same drive? I really don't use it all that much, but when I do want to use it, it is a major pain, especially when it coasters expensive DL-DVD's.
View 10 Replies View RelatedI have downgraded this laptop to Windows 7 x64 (from Win8 x64), all was successful except the wifi drivers.
Â
The driver installer supplied from HP just crashes and manually extracting and forcefully installing drivers results in a blue screen crash. I have also tried whom I beleive to be the chipset manufacturer, Ralink, for drivers but I get a "device could not start" error.
Â
It should also be noted that I have a few other unknown devices which may be impeding progress but I could just be clutching at straws.
I'm having some problems with my M1530 - it won't turn on/start up. I was trying to restart it last night (using the Start button command) and whilst it powered down, when it powered back up the screen does not come on although I can hear the hard drive whirring.
The power button lights up for about 3 seconds and all the volume/music control buttons all light up too, and then the lights go off but the screen remains dark. The hard drive keeps whirring however.
I also noticed that the battery light on the front of the laptop (next to the slot drive) flashes blue then amber then back again.
I have tried starting up after 1) disconnecting the battery and reconnecting it; 2) disconnecting the battery and using just the AC as power; and 3) using the battery only as power, but nothing works.
Id like to swap the DVD drive for a Blu-Ray drive from another XPS M1530. I can not find any documentation on the drive swap.
View 13 Replies View RelatedI got this Laptop with Ubuntu to dodge being locked into only having Vista and hit my head during many attempts to install Vista Home Premium SP1 64-Bit.
First problem is I keep getting a "can't use this volume" or "can't find volume suitable for Vista" during partitioning.
Got the Intel driver on a flash drive for it but not sure if I need the flash cache driver or not. Vista 32-Bit hung during setup so..
I received a replacement hard drive, but the description says it is a 250GB 5400 RPM hard drive. The hard drive I have on the system is 250 GB 7200 RPM. I also checked further specifications on the internet.
The replacement Toshiba 250GB hard drive (MK2552GSX) has 8mb buffer while the hard drive currently on the system Seagate 250 GB (ST9250421ASG ) has 16mb buffer.
Has anyone receieved a weaker hard drive as a replacement. I have to return one of them as part of the warranty service
Can this be done?Id like to swap the DVD drive for a Blu-Ray drive from another XPS M1530.I can not find any documentation on the drive swap...