Dell :: Updated My Inspiron 9300 With A 7800
Oct 25, 2007
I updated the graphics card for my Inspiron 9300.. Lots of money, and lots of time wasted, and now I'm having huge issues with my laptop. First off, I ended up buying two Dell AC adapters (both rev02) and with both I get an incompatibility error when I start my laptop.. Now, I get around this by unplugging the AC and pluging it back when I'm inside windows... good enough
Well, now I have another problem. In windows, if I were to even drag a window and pan it around, I would lose my display .. I would get these diagonal patterns covering my screen. and then after a few seconds the screen turns pitch black.. I've tried different things and everytime I seem to get the same result.
The drivers that I'm using for the 7800 is the ones recommended here for the initial installation of the card.. I've also tried others but to no avail.
I've flashed my bios more than twice but the same result.
I've even bought a new 9 cell battery even though I already had one to begin with(but it was functionally weird)
7800 card: [url]
My spec:
inspiron 9300
pentium 2.13(something like that)
2gigs of ram
initial graphics card was geforce 6800
View 15 Replies
ADVERTISEMENT
Mar 17, 2013
I updated the graphics on my Inspiron 15Z and when I restarted system I could not get into internet. So as i usually do when these issues occur is uninstall previous additions. Well, now when I turm system on it just blinks.
View 3 Replies
View Related
Dec 6, 2009
Dell just updated the bios to version A10.
Fixes and Enhancements:
1. Update thermal table for NVidia graphic.
I'm amazed they decided to update the bios after such a long time. Hopefully this will fix our toasty graphics cards.
View 15 Replies
View Related
Nov 19, 2014
Because I had a minor problem with my laptop (since a couple of weeks it was always starting up in manufacturing mode) I decided to update my BIOS.So I downloaded the BIOS-update A19 (currently I was running A11) and followed the instructions to install it (power plugged in, shut down all applications, removed all peripherals).
Everything seemed to go fine: the computer restarted, came in BIOS and did all update tasks, but then at the point that normally Windows should start. I got stuck on a black screen and my fan blew at maximum speed.I left it running for about 5 minutes in the hope it would come back but it didn't. So I decided to try to shut down the system. This was not possible by holding down the power button. The only way was removing the power cord and battery.But after this incident my laptop is completely death. Does this mean the motherboard is completely wasted?Because I’m out of warranty it is not even possible to open a support request for it on the Dell support site.
View 1 Replies
View Related
Feb 12, 2008
I'm looking to buy a Go 7800 GTX to go into my Dell XPS gen 2 notebook. I can't find them anywhere. The only one is some guy on ebay who wants $360 +shipping. I know I can get a better price than that, but where?
View 15 Replies
View Related
Aug 1, 2007
Guide to Switching your Inspiron 9300/M170 WUXGA into the Inspiron 9400/M1710:
You can't simply replace the display screens. The instructions below must be followed for your screen to work properly.
Required Materials:
- Small Phillips (I used #0 Phillips)
- Either 2 monitors (9400 and 9300) or part #YPNL-N017B (Google the # to buy it).
Step 1: Remove the display assembly. Dell has an excellent guide for this on their website.
[url] Click on Display)
Step 2: Remove the LCD Bezel (the gray trim around the screen). This requires removing the screws under the circular pads. I used a small flathead to pry open the bezel.
Step 3: Remove the 8 screws around the sides of the LCD. This will make it so your screen can be taken out. Do not worry about any screws on the top, they are for other things.
Step 4: At the bottom of the screen, there is a green circuit board. On the left side, you will see a screw holding the wire down. Remove this.
Step 5: Remove the LCD screen from the case.
Step 6: Look at the bottom circuit board again. This is the board we need to swap! Disconnect the 2 connections on the board. There should be on on the bottom and one on the side that is white.
Step 7: There will be 3 silver screws holding the circuit to the screen. Remove these screws. Note: This requires a very small phillips. I used a #0 Phillips to do the trick.
Step 8: Repeat steps 1-7 for your other monitor OR if you don't have another monitor...you will need to buy an inverter chip. The mfg # is YPNL-N017B. If you google that number, you should find a bunch of sites willing to sell it.
Step 9: Simply swap the bottom circuit boards between monitors or insert the new one that you bought.
Step 10: Follow steps 1-7 in reverse to reconnect everything back up! Before screwing everything back up. I suggest you plug it in first to test it out.
Congratulations. Your WUXGA LCD will now work properly on the Inspiron 9400. For anyone wondering, you MUST replace the bottom circuit board or the brightness controls will not work. You brightness will be stuck at the lowest setting and nearly impossible to see.
View 11 Replies
View Related
Jun 23, 2014
Brand new laptop 3 days old - model 7737. Came with Win8 and touchscreen was working fine
Have updated to 8.1 and installed other software like office, etc and touchscreen is now not recognised. System says "no pen or touch device"
Device manager also shows an unknown USB device (device descriptor request failed)
Device manager also keeps refreshing (like every few seconds) - sometimes the USB device disappears completely then comes back again as unknown.
I'm sure this must be a driver issue but have tried all those I can find.
View 8 Replies
View Related
Jan 29, 2013
A couple hours ago I updated my BIOS from A13 to A14. The firmware update took successfully and everything was fine, I THOUGHT.
Now, every single time (not exaggerating) that I restart my computer the Dell Circular logo pops up for maybe half a sec, and screen goes blank. Lights on laptop do it's thing, I hear the dvd-rom set itself like usual but like I said, no loading ring under the Dell logo appears, the screen just goes blank. All I have to do each time is simply push the power button till computer turns off, and turn it on again. The second time around it works completely normal and loads into Windows.
This happens every time I do a restart from windows, a restart from BIOS settings, or if I turn the computer on after it's been off for a couple minutes. The Dell circular logo appears for maybe half a sec, than screen goes blank, I wait forever and it does nothing but all I have to do each time is push the power button, let pc turn off, and push power button again and it works until the next system restart and it does it all over again.
Won't be too much of a problem but it's aggravating that every time I restart the computer I just know i'm going to have to wait for the blank screen and push the power button to turn it off and back on.
All drivers were fully updated before I performed the BIOS firmware update from A13 to A14. Update took successfully.
I unplugged laptop, and took out battery for a little while to clear my RAM, but that did not fix the problem.
I always loaded BIOS setting defaults, still have the problem.
I have no CD/DVD in the ROM, nor do I have any USB devices, memory cards, or blue tooth device hooked to the computer.
Inspiron 5720 (all drivers updated)
BIOS Version A14
WIN 8 64-bit (fully updated)
CPU is i5 3210m
View 2 Replies
View Related
Jun 21, 2009
A friend of mine has a Inspiron E1705 with a now-dead 7900M GTX. I was wondering if it is possible to put a 7800 Go GTX in it?
I could do a little upgrade for myself by buying his video-card-less notebook and putting my 9300's 7800Go GTX in
View 3 Replies
View Related
Nov 22, 2014
I have installed Windows 7 Ultimate SP1 on my laptop after upgrading fom A08 to A09. At first my batter did not charge at all , so i got it replaced with a 9 Cell one. But it would only vharge till 69%.
I tried all the way on internet uninstalling drivers, removing battery, draining it out etc. Still no chnage. Lately it is now charging only till 33% .
Now i Plan to go back to Vista Home premuim just to see if the battery charges fine. My question is do i also downgrade the BIOS or should i check first if it works fine in A09 and then install A08.
And is it safe to install A08 over A09 BIOS ?
View 3 Replies
View Related
Feb 19, 2009
I have an XPS Gen 2 that I bought back in 2005.
What, if anything, is needed to be done in order to upgrade my system from having a 6800 Ultra card to a 7800 GTX card? Do I need to purchase any additional parts?
View 14 Replies
View Related
Oct 13, 2009
Laptop started with verticle lines. Did some research, seems common video card problems - scoured the net for cheapest replacement (dell wanted crazy money!)
Found ebay seller who links to this forum (did not purchase).
Seems the link is for 9300's...read about flashing BIOS to make laptop think its an XPS...
But, MINE is.
DO i need both the battery and power supply? battery died a year ago and i just took it out. Laptop is desktop. Prefer not to buy Battery .....
View 11 Replies
View Related
Sep 3, 2007
I installed a Go 7800 GTX in my I9300 laptop and OC'd it to 450/1250.
I tried the 3 xp drivers on tweaksmobile and experienced slow loading of npcs, textures in wow, speckles (artifacts), and sound crackles in wow, even lag whens soloing in nobodies land.
My x300 used to perform better.
View 11 Replies
View Related
Feb 10, 2013
Due to an update for the Bluetooth driver, my Laptop Inspiron N5010 has gone into a Repair Option Loop. Primary suggestion is to deal with the RegBack folder, something I haven't tried just yet. I can't see (through Linux Live DVDs or Win 7 Installation DVD) the Document Folder. There's is a User Folder and a UserName Folder but no Document Folder. There's a Desktop Folder but the files that used to be there are no longer there. I'm not sure if I really lost them or they're hidden by the system. I thought of removing the Hard Drive and connecting it to another PC to see if the Documents are still there but for this Inspiron, you need an Engineering Degree to remove the HD.
Before someone suggest it, there is no way to get into Safe Mode. The only option is using the Win 7 Home Premium Ed, go to repair option (which fails) and try the System Restore option. All ten Restoration Points failed.
View 4 Replies
View Related
Dec 18, 2007
BEEN a While and A long time...
I currently order a Pentium M 735 1.7 Ghz 400FSB to overclock up to 2.26Ghz@533Mhz. Still waiting on shipping. Anyways, I am looking forward about upgrade my GPU Go 6800 OCed 370Mhz/700Mhz to Go 7800 (NON-GTX).
Yeah, GTX one is pricey for me.
I am wondering does the Non GTX version of Go 7800 still need 130Watts Adapter?
I did a lot of search all I could find is people talks about 7800GTX version.
In my thought I think 6800 to 7800 different is more pipelines and pixel fill rates and etc and the power needed is the same. Right?
So do I need 130 watts or I just keep 90 watts adapter which is perfect for NON-GTX Go 7800
View 15 Replies
View Related
Sep 28, 2007
My Beast's 80 gig 5400 rpm HDD is on its last legs, and I was wondering what Hard Drives are available for me to replace my old one. I will definitely be looking to upgrade.
View 10 Replies
View Related
Sep 18, 2007
What exactly do I need to connect my Dell i9300 laptop to a regular tv? (not HD) I searched a bit but couldn't seem to narrow it down. I know I need a cable, but am not sure of the part number, and software if any. I want to be able to display what's on the screen onto a TV.
View 12 Replies
View Related
Feb 17, 2009
I'm looking to upgrade my 9300. I currently have the 1.6GHz 533FSB Pentium M and I'm looking to move to the 1.6GHz 400FSB pin modded to 2.13GHz.
I just have one question: will the following processor work?
http://cgi.ebay.com/Intel-Pentium-M-Dothan-1-6-GHz-2M-400-Laptop-CPU-
SL89T_W0QQitemZ350165690041QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item35016569 0041&_trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%
3A1|240%3A1318|301 %3A1|293%3A1|294%3A50
View 5 Replies
View Related
Apr 4, 2008
So speedtstep is enabled in bios and it says its running at the minimum which is 800 mhz and it shows a maximum of 1.8 ghz. I am running A05 bios.
I have tried all the different power settings in windows and they do not change it. I try running a few games and programs and it still sits at 800 mhz. I think something is messed up and don't know how to fix it.
Anyone know what I can do to see if the speedstep is working correctly so Im actually using my cpu to its max when needed.
View 11 Replies
View Related
Apr 3, 2009
I put my Inspiron 9300 into hibernate this morning, tried to wake it back up and all I'm getting aftet the Dell logo and status bar (POST) is a black screen with a blinking cursor in the left corner.
When I hit the Play button on the front of the notebook, it brings up the Dell Media Direct logo screen, but nothing happens.
When I boot with my XP CD and go to the recovery console, I can see the hard drive and files, though I can't access most folders because I get an Access Denied message.
I tried booting from my flash drive, but when I do, the flash drive is recognized as the c: drive and the hard drive isn't listed.
I also tried unplugging my laptop and battery and held down the power button for a few minutes to discharge any electricity. No luck.
View 5 Replies
View Related
May 9, 2009
I have an Inspiron 9300 with an 80GB IDE hdd. I have recently succesfully upgraded the RAM to 2gb. Im now looking to upgrade the HDD and would like to go for the Western Digital WD3200BEVE (320GB). I know there is something about the need to partition it as XP only sees up to 130GB but I also read somewhere that if you download HD Tune and if the 48 bit address box is checked then it will see the whole drive. As Im a bit of a newbie to all this, does that mean I can just pop the 320gb drive in and my system will see it straight away or will I have to partition it with no partition larger than 130GB?
Also does anyone know if the WD3200BEVE is the best one to go for in terms of performance and storage size?
View 9 Replies
View Related
Jan 23, 2009
My Dell Inspiron 9300 laptop has Windows XP Pro with all three SP packs, 80GB Harddrive 1 GB RAM, NVIDIA Geeforce GO 6800, 3 Partitions of 7.3GB, 2.8GB and 2.86GB - all showing plenty of free memory- with a number of peripherals - printers,
USB attachments etc available through a small network.
I have been using, successfully, Acronis True Image version 11, but I am unable to instal the latest upgrade version, True Image 2009.
I first installed it OVER he earlier version (as Acronis recommend) and I've tried installing after a clean removal of version 11, and the results are frightening .....
View 7 Replies
View Related
Mar 14, 2009
Both the fans of my Inspiron 9300 make a lot of noise. Previously in order to reduce noise I tried to completely remove the fans and cleaned them with compressed air.
At that time I found it weird that they did not make much noise when they rotated (pretty fast) because of the compressed air. The fans keep making the same amount of noise.
I notice that if I apply some pressue next to the keyboard where the fans are located the noise emitted changes.
View 6 Replies
View Related
Mar 16, 2009
I am helping a friend reinstall XP on his several year old Inspiron 9300. He doesn't recall an XP install disc coming with the machine (he just called Dell and they side he doesn't need one).
Since I have extra XP install discs/licenses, could I just use a retail disc to reinstall and then get the drivers from Dell's site
View 3 Replies
View Related
Jul 25, 2007
Been looking at newegg lately and RAM is crraaazy cheap. I've been meaning to upgrade my RAM to 2 GB.
Currently I have a:
Inspiron 9300
1.83 ghz processor
1 GB RAM
256 mb GO geforce graphics card
Windows XP
I play games quite frequently so the RAM would be great. However, I've never upgraded my memory or computer as a matter of fact before.
My question is, how much RAM will my computer support. Should I opt to go for a 2 GB (2x1 GB), 4 GB (2x2GB), or 2 GB of 1 stick of RAM and keep 512 mb of my Dell RAM to try and get 2.5 gb of RAM? Is the last option feasible?
View 10 Replies
View Related
Mar 25, 2010
My computer was working fine last night, shut the lid and went to bed. Woke up hit the power button and I have blue screen. Restarted and now have blank black screen. I have a XP cd I try to put it in and nothing happens. I want to boot by cd but it wont. Cant figure out how to get into setting to change order for bios. I hit F8 and that works and tried all the options and no go, still blank black. I would wipe it out and start over If I could. Nothing new was installed. It was fine last night and today it woke up nasty!?
View 10 Replies
View Related
Jul 28, 2007
does a nvida geforce go 7800 (not gtx) fit in a dell inspiron 9300 (that has a x300 in it currently)?
was bidding on one on ebay that said it fits a dell 9300 but i wanted to double check.
View 12 Replies
View Related
Sep 11, 2009
I'd like to ask if anyone knows how to boot from a 2nd hard drive installed in the modular bay.
I've searched prior to posting but I couldn't find a definite answer.
The manual says to choose the option in bios but there is no such option.
View 15 Replies
View Related
Sep 11, 2009
New to the forum and after a bit of advice, I have a:
4 Year old
Dell Inspiron 9300
1GB RAM, just ordered a 2GB upgrade which should arrive today
70GB hard drive & 500GB harddrive with 350GB free space
Intel Pentium processor 1.86 GHz
WindowsXP SP3
NVIDIA GeForce Go 6800 Video/Graphics card (256 MB)
1440 X 900 screen resolution .....
View 8 Replies
View Related
Mar 6, 2009
the nVidia 6800Go (Dell part 0W5373, I guess) video card on my Inspiron 9300 has stopped working properly.
I've ran Dell Diagnostics and it reported an error code "5300: 0119", which suggests that the video memory is damaged.
Now I'm wondering whether I can put an ATI X300 (Dell part 0W5379) found on ebay in place of my fried video card.
The X300 is much cheaper than the 6800Go and I'm not interested in performance at the moment, I just want to fix my laptop.
Would that be compatible?
In the end that ATI card has been extracted from another Inspiron 9300...
View 8 Replies
View Related
