I have a Dell Inspiron 9400 laptop/notebook which recently has started to get green pixels throughout the whole screen. Have also tested external monitor and get the same result.
I have searched, googled and even called dell and the response on all cases was that i need to replace my graphics card.
The graphics card i originally have in it is a Nvidia Geforce Go 7800 graphics card 256MB. Model number is P494 (if that helps makes it easier) Could someone pls advise me or any compatible cards where i can get the same card or any other card which is compatible and a reasonable price.
I am also after a WLAN card. WLAN Dell part number 0KC501 and also require the 2 cables for Main and Aux or the connectors which click on them as mine are completely damaged and need to be replaced.
today's finally the day my laptop decided to finally die. Seems like the GPU's memory got corrupted in some way, being unable to run Windows itself unless it's in Safe Mode.
I started realizing this was the case when the Windows loading bar showed green dots all over the screen, plus giving a lot of BSODs about PAGE FAULT IN NONPAGED AREA and finally, when I just logged into regular Windows, started having extreme graphics problems.
My 9400 MB died this AM! Suck!! Was looking at replacement MB on Ebay, seems there is are a few different PNs to choose from. Anybody know the most current part number Dell produced? Prices dont seem to bad compared to a new laptop.
Actually, While Ive gotten this thing dopwn to parade rest. What is the best combo of MB Vid and CPU to make. I have look ed a nd most parts are still cheaper than a new box. I hve serched these forums and read MANY MANY ides for mods but all the configurations are too numerous to keep track of.
This is now a project and I want to upgrade my gaming capability while on thre road for my job. If you all will just give me what you think are the best options I will then reserarch rather than start from scratch.
I have a Dell E1705 / 9400. I want to upgrade RAM. Currenly i have 2 * 1GB 667 MHZ RAM. I want to upgrade to 4GB. Will my laptop support. I want to upgrade to maximum frequency ram. 800 Mhz or more. If its available.
I have a 9400 and i just bought an fx2500 ... bought the PA-13 130w power adapter... I have modified the pieces that need to be snapped off in the casing... all ready to put in the card...... when i fire it up WHAT DO I DO? And how will i load the Drivers... AND,... AND what drivers
I have a 2 year old inspiron 9400 with alternating vertical bars (black and green vertical dashes) on boot up screens and black screen with windows.
It has the infamous go 7900 gs video card I've read about here and everywhere. I've reloaded the latest (A03) video drivers and have the latest (A09) bios on the machine.
I have checked the card for dust bunnies (actually removed it for a good look and to check connections) and other than removing a bit of dust the heat sink fins were open.
Video side fan turns on in the lower 70's degrees C and off in the upper 50's/C. I don't get any errors when I run the diagnostics (f12). It boots up in safe mode and VGA mode if I disable the graphics adapter while in safe mode.
That's how I'm using it now is in VGA mode. From what I read here I've joined the many many people who have had problems with the 7900 gs card in the inspiron.
My inspiron 9400 will not boot. The only functions I can see is the battery light comes on when plugged in to indicate that it is charging, and when I press the power button the power light comes on for 5 seconds then goes off, thats it.
I thought this problem was the board earlier, so I replaced it with a tested motherboard and am having the same problem.
I have also tried booting with just AC adaptor and just battery, no change. Right now my only idea is the CPU, is this feasible? Can somebody help me with this?
Having installed a 7900gtx in my Inspiron 9400, I let Windows Vista download a Microsoft compatibility driver for the card as a temporary measure until I got round to trying out other drivers. I've since tried Nvidia's driver from their website which didn't recognise the hardware; the Dell driver (from the M170 driver section) and the Xtreme-G 163.69 and 162.62 drivers, all of which slowed down the graphics performance of the Aero effects and some caused flickering.
I did not use any special software to remove the drivers - just basic install/uninstall. I've rolled back to the Microsoft driver which works fine within Windows and runs games fine at low settings.
I now have an additional problem in that Corel Paintshop won't start due to a "Driver components mismatch."
What should I do? Has anyone else experienced performance loss with "better" drivers? or could that be down to the presence of the Microsoft driver?
How do I get this thing working with the wonderful performance I should have?
I know a few folks here have posted about their Inspiron 9400 to a M1710 XPS mod but I would like to post my own as well.
Here are pics of my system half way modded:
I have the M1710 black colored XPS lid coming within a few days.
The palmrest is in new cond.No wear what so ever or scratches.
The power button cover is in new cond.Both the palmrest and the power button cover was bought on saturday from Dell Parts and I got it today,tuesday.Free S/H from Dell.I know I paid a little more than some for the plamrest but it is in new cond so I cant go wrong.
Dell P/Nassembly,cover,hinge,plastic M1710-d/p:CF426-$56.00 assembly,palmrest,plastic,M1710-d/p:FFO84-$10.99 The XPS M1710 black cover was bought on Ebay for$40.00 with S/H and guy's screenname is "TEX-JET"and he says is A+ cond.Currently waiting on delivery.
I am lastly later going to buy a silver XPS M1710 keyboard.Soon
I will update the pics when I get the XPS M1710 lid received and I have a chance to put it on.
I have Inspiron 9400 with 7900Gs card. I have 9 cell battery. I have ordered 7950GTX, 4GB of DDR2 and also 130W power pack. Is there anything I need to install and use this card? I had a look thru the forum but I couldnt find any information how to instal this paticular card and what sor of BIOS will I need for the card and the laptop.
i have dell e1705 1,8 dual core 2 gb ram it its possible to swop 7900 gs go with 6800 ultra go? ,to XPS m1710? (bios flashed) right now i have 7400pts on 3dmark05 , when i play gpu of 7900 its to hot like 80C:/ i tray instal new drivers but i have error....i tray use fan non stop but work just sometimes:/
here's my setup below so far. Am modding it slowly into an XPS M1710 look a like, have the keyboard, just waiting on the LCD top and palmrest with XPS in the mouse pad. I managed to get the black XPS LCD cover too, but for now I have the chequerplate look that mine came with. Much prefer the silver keyboard to the black, and it has a nicer feel than the black one to type on.
External HD's are 2x small 80GB Lacies which are for portable work, and the big one is an Iomega 500GB. I'm a photographer and web desginer by trade so the more space I have the better.
Let me know your thoughts. p.s not sure how to get pics up smaller ?? so hope there not too big.
2.13 core 2 duo, 2gig ram, 100gig 7200 rpm hd, 1920x1600 true life screen, 7800go gfx which I purchased in June 2006. I am in the UK so this cost me £1100 from the Dell outlet.
During December 2007 it has had 4 service calls where the motherboard, graphics card, and lcd have been changed 4 times with the same fault occurring (lines on lcd).
Dell have kindly agreed at my request to swap the laptop for a new 9400, but as the 9400 is no longer in production Dell said they will give me a similar spec 1720 instead, which was nice of them and I agreed. Here is the spec for the 1720:
All seemed fine but slower hd which I can live with (just about).
I then started doing some research and discovered the 8600 is slower than the 7800 I had? and the laptop has no DVI port! I used to connect the 9400 to my external montior and sometimes my HD TV using the DVI and will miss it dearly on the 1720.
Would it be unreasonable for me to ask for a higher spec machine over the 1720?
My laptop was in a car accident and the bottom chassis cracked open, it still works but long story short I'm getting a replacement. I was scared I would get one of the new 17" models with the POS 8600 card but to my relief my approval went throuh today, I just verified it and its an identically speced M1710 to my 9400.