I have a seagate 250 gb external hard drive.Can i some how copy the Recovery partition to the external harddrive?wheni go to "my computer" under recovrey partition (D do i just copy the file in the recovery partition? its only 185 kb ...... D:has 6.58 gb in it. so whats that about? also can i leave my ext. hdd in fat32 or does it need to b NTFS?
View 8 Replies
I need to upgrade (get larger) external hard drives for my Photography Folders, plus an identical Backup HD...
Can the Dell Inspiron 1764 with Win 7/64 support external HDs over 2TB as one partition?
I am thinking of getting 2/3TB or 2/4TB External HDs (not RAID), to replace what I have now..
I have 4 partitions on my disk as shown in Disk Management. I don't use hibernation, so I want to reclaim the 8GB partition for use as storage. I have a few questions regarding this.
1) What will I compromise if I remove the 8GB partition, other than hibernation?
2) I right-clicked on the OS partition and selected "Shrink Volume". I received the popup shown in the attached image below. It doesn't reflect anything about returning the 8GB partition to the OS partition. In fact, shrinking goes against my intention of expanding the OS partition to include the 8GB. Right-clicking on the 8GB partition only brings up "Help" in the context menu and is not shrinkable.
3) Can I do this any time after having used the laptop for a while, with data and programs already installed? Does the process affect existing files and installations?
I recently bought a HP HDX 16 laptop, and today I've created my recovery disks. I also have a recovery partition.
My question is:
If I remove that recovery partition, and go back to the factory installation using my recovery disks, will my recovery partition be back?
I've read that those recovery disks bring your notebook back to the state as it came from the factory, so that would include the recovery partition, right?
I'm thinking of formatting my laptop to restore everything to it's original state(actually kind of have to!) but the problem is that I've never done so via the partition.I used to use the Recovery DVD but since it's broken this is my only choice.So how do I do it and will I need to install the drivers myself after?
View 4 Replies View RelatedI'm wanting to seek out a bit more space on my ageing compaq presario v5000, I have a full set of recovery disks that i can use if need be, so i'm thinking that if I delete my partition d drive i'll effectivly gain almost 6gb of usable space and with only 60gb altogether that will be helpful to me. trouble is, I have formatted the partition in disk managment (xp btw) but I can't remove the partition and use the extra space,
View 7 Replies View Relatedhp hdx16 and i have a big problem with creating my recovery disks ,i really need ur help i tried to install xp on my pc which tended to replacing my boot sector and i cant creat my recovery disks i searched over the web i found people who have my peoblem and they have it fixed using other computers boot sectors to restore their own so i can access my recovery partition again here is alink to the problem , the solution is by the end of the page [url] i just need some one to give me his original hdx16 boot sector of drive c and d(recovery) and the master boot record these files are only 512bytes u can get them using these instructions:
1. Download HDhacker software from here.
[url]
es/HDHacker.html
2. Install & open HDhacker on your laptop.
->Select logical drive(Bootsector) and then choose C
->Read sector from drive -> Save sector to file.
->Select logical drive(Bootsector) and then choose D as ur recovery partition
->Read sector from drive -> Save sector to file.
->Select phisycal drive (MBR)
->Read sector from disk -> Save sector to file....
I have this hidden partition on my notebook (aspire 6920G) and I have no idea what is it used for. I know that PQService is recovery partition but I've never heard of this. By googling I've found that HP's used to use Compaq Setup partition to boot bios (?), but this is acer. I would really like to get rid of it (because now I can't create another primary partition).
View 6 Replies View RelatedJust got a new HP Laptop dv7t and it comes with 4 partitions on the 320gb hard drive. I need to have the Windows 7 partitions divided for my OS and programs and then a new partition for Data.
I am only allowed 4 partitions (I do not want to use dynamic disks), currently there are two hp ones, recovery and hp tools and the two win7 partitions system and os (Win 7 Prof).
What does everyone do if they want to have an additional partition, delete recovery or hp tools?
got a DV7 with 2 partitions- C: drive with OS ad D: drive with the recovery part.
I have burned 3 recovery dvds from the laptop.
If I put in a new hdd, fire up the recovery discs.. I know it will create a C: drive with the OS.. but will it also create a D: drive with the recovery part same as original hdd?
ive got a hp pavilion dv9823em notebook and one of my friends formatted my recovery partition drive. for some reason i didnt make recovery cd either now i want to reboot my notebook, it wont let me. is there anyway i can reboot it?
View 3 Replies View RelatedI want to boot my vista, and I cant make it do that, all it wants to do is boot the RP.
View 8 Replies View RelatedI just bought HP Pavilion DV6t 2000
I have tried to split to the C partition into 2 partition with "Paragon - software"
after it finish the machine reset and didn't boot again I tried to do recovery but it doesn't load, i manage to install another version on windows 7 home when i log in the machine i found that the recovery partition become dynamic and still cant boot from it
I tried to get HP backup and recovery manager for my lap but i cant find this version now i Need to do recovery what i should do
I have attached a screen shot of my disk management
I bought an HP-DV6 1045EE, but I didn't like the partition scheme..
This was the way it first was:
C:Local Disk [288gb]
D:Recovery [10gb]
C was preloaded with Windows Vista. I shrunk the partition using Vista's Disk Management as much as I could, and shrunk it further to 50gb using Gparted. After doing this, I couldn't boot into Vista anymore. So I restored the image using the recovery manager.
I then created another 50gig partition for Win7, and installed it. All well and good.
Then I created an extended partition out of the remaining space, since all other partitions were primary, and created two logical partitions, 1 unformatted and the other NTFS.
After this, I booted into Vista and saw that my recovery partition had turned to unallocated space, even though I'd made sure not to touch that partition no matter what...
I bought a HP-Pivilion DV14-1551dx a month back and I haven't created recovery discs yet. After a month of usage I suspect some virus and spyware in my laptop because some of my friends browsed unprotected websites. Will the virus and spyware affect the recovery partition? Now if I create a recovery disc from the recovey partition will it be safe to use those discs or will it be affected by virus and spyware?
View 3 Replies View RelatedI am changing the hard disk of my laptop from 80gb to 320gb. for the primary drive i.e. c: i can use the recovery disk that i created to load the os and the drivers.
Now the question is how can i create the recovery drive d:
I would prefer to have the hp recovery partition. if there is use of some other software like norton ghost then i would prefer to use any free software.
I need to transfer things from my laptop (not working) hard drive onto my PC.
I've taken out the HDD, and it says Hitachi SATA I found out it's 2.5" so ordered an external case.
However the pins (I think they are called) don't fit into the case.
My HDD
The case I bought
Now I'm looking at this product, which says it fits all SATA drives
[url]
Does anyone know if that would work, or does HP use different pins to everyone else?
ETA laptop is a Presario F500
I'm thinking of jumping on my purchase with the $450 off coupon floating around. The thing is to get the $1399 minimum, I would probably need to include the External Tray Lightscribe Blu-Ray ROM with SuperMulti DVD+/-R/RW Double Layer with my purchase. My question is - if I don't really need this, how easy is it to sell this? Is there a demand for the HP Blu-Ray ROM?
View 3 Replies View RelatedA lot of website seem to list a dvd-rw , but can anybody tell for sure, model number below.
What do the hp codes in the model and part numbers mean?
+REP for answers
HP DM3-1020EA , VJ388EA#ABU
I have a new 2530p here. When I start it up it shows a screen where I can choose what language I want to install of Windows Vista.
If I choose a language, can I later recover the laptop to it's original state, so I can choose the language again?
wanna know some things before i install Windows 7 as a primary OS? first of all i want to ask that can i partition the hard disk as i want. means rite now vista won't allow me to partition beyond 140Gb but i am having 210GB of free space! also if i ever wanted to return to Vista can i use Recovery to revert back? also is it a wise decision to go from vista to Windows 7?
View 6 Replies View RelatedHP is offering a USB 2.0 external Blu-ray drive with some of its notebooks (Envy series, Pavilion dm3). I want to buy one of them for my laptop but can't find a link. Does anyone know where to buy them? I am talking about the slim, portable USB-powered ones.
View 10 Replies View Relatedif the microphone jack takes stereo input? The integrated microphone is stereo, so I'm guessing the sound card will take stereo input, but I don't have a stereo mic to test.
If the mic jack is stereo, does anyone know where I can get a converter that would basically mix two mono mics into stereo? To be more clear, I have two singstar microphones and it came with a usb converter that would place each mic on separate channels. However, the input isn't as good as if I directly plug the microphone into the mic jack. Thus, I need something that is like that usb converter, but instead plugs into the microphone jack instead of the USB port. I hope that was clear enough. I don't need the computer to recognize two microphones.
I own an HDX16T. Day 1, I burnt RECOVERY DISKS and then I proceeded with a clean install with a new vista install.
I decided to try to restore the notebook with those recovery disks. Guess what? It appears that you can no longer use those disks without having the original HP RECOVERY PARTITION?
I just simply can't use it anymore. I can't restore my notebook to factory condition anymore. The only option I have is to Click "FINISH" and reboot.
I bought HP 6930p with ATI graphic card, WIN 7, and connected to the external display 24" (1920x1080) trough VGA port. There is a very noticable blurry and annoying image on external display. I tried different settings, but nothing did not help. Is there any solution to this problem? could be my graphic card or vga output damaged? Since with my 4 years old toshiba notebook, image was clear.
Has anybody docking station and is DVI output working fine (clear image)?
Can I run the notebook closed and just have it hooked up to an external monitor?
View 7 Replies View RelatedI have a HP HDX18t w/ Windows 7 Home Premium and the Nvidia GeForce GT 130M video card. I'm trying to hook up a Dell 30" LCD monitor with a native resolution of 2560x1600 via the HDMI output using a HDMI to DVI cable. Doing so, the system will only allow the external Dell a max resolution of 1280x800 while the HDX screen stays at 1920x1080. The 1280x800 look really bad. I want to use its native resolution of 2560x1600 or atleast the 1920x1080. When I use VGA output, nothing shows up on 30" (blank black screen).
Using my 24" Dell, I can get 1920x1080 either via the VGA or HDMI (to DVI) fine. Based on my research it seems to be a limitation of the Nvidia GeForce GT 130M because it just doesn't allow that high a resolution (i.e. no dual-link DVI capabilitiy). Is this true? Or am doing something wrong?
Is there any solution in using a 30" monitor with the HP HDX18t? Will one of those Matrox DualHead2Go devices work to run the 30" and 24 inch monitor simultaneous at 1920x1200. I'll be fine with that. My wife is firm in using the 30" monitor we have. Is this a loss cause and I have to get another laptop that will support a 30" external monitor? If so, any advice on which one.
how to get an external monitor working with a HP DV9700 laptop? The screen is cracked and it's totally white, so I'm unable to do anything through the BIOS, desktop, etc.
I've tried Fn-f4 and every other f button combination.
The laptop is plugged into the mains, so there should be sufficient power for an external monitor.
I've also re-booted the laptop with the monitor connected and switched on.
There is no option to switch on the laptop with the lid closed, due to the position of the on-off switch.
The laptop is not networked, so I can't access the hard drive any other way.
I try it without the battery (not sure why?), but that didn't work either.
I have a DV7T on order. How large of a monitor can it push without slowing down?
I'd like to use a 22-24" if possible.
ordered another LCD and tried to replace it, to no avail. I opened it up and everything was hooked up right. Then I tried the other LCD, he gave me with it. Same thing. When I hit the fn f4 in vista, it appears to try to switch but the LCD never comes up. Also, when switching display modes, the LCD will flicker breifly (VERY BREIF). This does not smell like a video adapter or motherboard problem. I am still working on it and researching but figured I would see what all of you thought.
View 8 Replies View Related
