I am changing the hard disk of my laptop from 80gb to 320gb. for the primary drive i.e. c: i can use the recovery disk that i created to load the os and the drivers.
Now the question is how can i create the recovery drive d:
I would prefer to have the hp recovery partition. if there is use of some other software like norton ghost then i would prefer to use any free software.
got a DV7 with 2 partitions- C: drive with OS ad D: drive with the recovery part.
I have burned 3 recovery dvds from the laptop.
If I put in a new hdd, fire up the recovery discs.. I know it will create a C: drive with the OS.. but will it also create a D: drive with the recovery part same as original hdd?
A friend brought over her HP Pavilion dv6226us Laptop running VISTA. The hard drive was full and the machine could not be used for anything. Would like to wipe the dirve and start over, but need a VISTA recovery disk for the machine. The D: partition where the backup files from HP resides was removed from the drive so Recovery manager is not an option. Checked the HP support site and there are not recovery disks available for HP for this model laptop with VISTA, at least when I entered all the information on the site it did not list anything.
Â
Is there anything that can be done by copying the correct files from the WINDOWS directory on the C drive.Â
Just got my new HP Pavillion dv5-1000 laptop and I'm very pleased with it so far, apart from one problem.
The machine came without any backup disks, which seems to be a standard HP thing. So I've tried to create my own disk using the Recovery Manager software. It goes through the first part of the process collecting files, but when it reaches 100% I get an error message saying that the files are more than 0mb and it can't continue.
I've tried using a different blank DVD but get the same message.
It's a pain, and is spoiling my enjoyment of an otherwise excellent machine. If anyone can suggest a way around this I'd be grateful.
I've tried this fix:unable to burn Recovery DVD but the software doesn't install.
I’ve just done a clean install of my Dell Vostro -- reinstalling vista and removing the recovery partition in the process. Outcome = a ‘cleaner’ machine with none of the preinstalled bloatware/c**p from Dell. (first time I’ve done anything like this, but followed a brill guide in the Dell section of this forum ).
I’m about to tackle my Mums Compaq Presario C310EA. The aim is to remove all the rubbish she has accumulated over the years, incl any spyware/ adware she may have, and generally have a bit of a clean sweep…. hopefully resulting in a faster laptop. I’m backing up her data, and moving some of my Dad’s stuff somewhere else.
Basically I want to clean up as much as poss, but unfortunately she has no xp disk, just the recovery disks (cds) she burned when she first got the laptop.
As she has no xp disk I guess the best I can hope for is to reset the laptop to the factory settings (?) .. not ideal, but I don’t think the (factory set) bloatware is too much of an issue for her – she’s not a heavy user.
Should I use the recovery partition for this, or do I need to use the cds she burned? .
I’d like to know the best approach – and can’t seem to find a set of instructions to follow.
I just bought a 2530p, with 1.8-inch 120GB hardisk. The partition is assigned as below.
- 101GB for C:
- 9GB for D: (HP_Recovery )
- 1GB for F: (HP_Tools)
I would like to replace existing 120GB HD with larger one, and would like to ask some question.
1. what is the largest size of 1.8-inch hardisk for 2530p? I refer to "Service and maintenance information" manual, the hardisk size seems only up to 160GB, could I installed 260GB or even larger hardisk?
2. Is it neceessary to keep the partition of HP_Tools or HP_recovery?
(if I delete the partition 'HP_Tools' or 'HP_recvoery', can the OS be booted up?)
I want to install windows by Bootcamp. But I've found some problem about a partition on my HDD.
My MacbookPro HDD has 27 GB free space remain. And it's has only 1 partition on HDD. I try to create a new partition, 10-15 GB on my HDD for Bootcamp. I just want to run windows for some program, some games. But it always show "verification failed", "don't have enough space", "partition failed"...etc. on bootcamp and disk utility
I've seen some thread about a partition for bootcamp problem on some website. Some solution such as
1. use iDefrag for HDD then try to create a new partition.
2. Shrink your HDD space (disk utility) , revert , then try to create a new partition by Bootcamp.
3. Try to remove some files, that size is over 1 GB, then try to make a new partition.
4. Backup your harddrive, reinstall then try to create a new partition (I don't want to do this)...
I have a dvd with Windows 7 Beta on and I am trying to isntall it so it will dual boot with Vista on my XPS M1330.
Now the first thing I have to do to dual boot is to create a primary partition for Windows 7 or to shrink the C drive using vista's disk management.
I have tried many different programs to shrink my harddrive or create a new primary partition so that I can dual boot Windows 7 Beta.
I just accepted the delivery of my 5 brand new notebooks for my company's new workers.
Â
3 of those notebooks are HP Probook 450 G2's (PN: J4R69EA)
(These are the models with the 128GB SSD drives)
The other two are Lenovo E540’s with similar specs.
Â
So first things first, create recovery media. So that is done before I hand them to the end users in question. While trying to create the windows disc, the "HP Recovery Disc Creator" program demands Dual layer DVD's: "Please insert a Dual-Layer DVD to proceed" The DVD's in question I’m using are "Sony DVD+R 120min/4.7GB" discs that in the past have always worked. (and at this moment are working for the Lenovo portables)
 Â
[URL] Unfortunately this is not the same interface I have. I can only choose a drive to create a backup to
(in this case it is Drive F: for internal drive) I also tried an external DVD writer with the same results.
Â
I have not tried a USB stick, but this is not what I want and since you can only create one set of backups…
Â
Link to a screenshot: (you need to copy paste it into your browser apparently)
Â
[URL]Â
Â
This would not be that big of a problem if there was an actual windows 7 key printed on the portable. If I had a key, I would just reinstall the machine straight away with a clean windows 7 image so I dont have to clean out all the HP software. but unfortunatly this is not the case. so i need a Windows 7 Recovery disc to be created.
I've just replaced HDD by SSD and tried to make a recovery USB media by means of 8.1 recovery utility. The process takes suspiciously short time, but finishes normally reporting that media is created. The size of all files on the flash is about 200 MB. When I did the same media with HDD the size was 12GB. I tried to boot with that flash and it failed with a message about corrupted media or the like. I always believed that windows does not take into account the physical structure of the drive and cannot understand what's going on and what to do.
View 4 Replies View RelatedI recently bought a HP HDX 16 laptop, and today I've created my recovery disks. I also have a recovery partition.
My question is:
If I remove that recovery partition, and go back to the factory installation using my recovery disks, will my recovery partition be back?
I've read that those recovery disks bring your notebook back to the state as it came from the factory, so that would include the recovery partition, right?
I'm thinking of formatting my laptop to restore everything to it's original state(actually kind of have to!) but the problem is that I've never done so via the partition.I used to use the Recovery DVD but since it's broken this is my only choice.So how do I do it and will I need to install the drivers myself after?
View 4 Replies View Relatedhp hdx16 and i have a big problem with creating my recovery disks ,i really need ur help i tried to install xp on my pc which tended to replacing my boot sector and i cant creat my recovery disks i searched over the web i found people who have my peoblem and they have it fixed using other computers boot sectors to restore their own so i can access my recovery partition again here is alink to the problem , the solution is by the end of the page [url] i just need some one to give me his original hdx16 boot sector of drive c and d(recovery) and the master boot record these files are only 512bytes u can get them using these instructions:
1. Download HDhacker software from here.
[url]
es/HDHacker.html
2. Install & open HDhacker on your laptop.
->Select logical drive(Bootsector) and then choose C
->Read sector from drive -> Save sector to file.
->Select logical drive(Bootsector) and then choose D as ur recovery partition
->Read sector from drive -> Save sector to file.
->Select phisycal drive (MBR)
->Read sector from disk -> Save sector to file....
I clean all partition, using windows instalator to create two partition: 100GB and 890GB. When i try to install windows i see:
,,Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information"
 I set:
Â
Configuration: Sata Controller Mode -> Compatible
Boot mode: Legacy Supprt
Boot priority: Legacy First
I have an HP ENVY dv7 Notebook. When the computer was new I tried to make a recovery disc set. When finished I would check the discs ( DVD - R ) I would get a message saying the discs did not write correctly. Tried discs from three different packs, still the same. Called HP Support and they went through the procedure with me, still the same fail. I was told me not to worry if I ever had to have the discs because of a crash they would send them to me for free as they have a record. Now I will be using this computer mainly on the internet and think I should have the discs just in case. Called HP and was told no record, no free discs and it will cost a lot to make the discs. Is there any way to make discs or put the info on a hard drive? I do not know if the computer thinks I made a copy or not since the copies I thought I was making were defective. Â
View 2 Replies View Relatedive got a hp pavilion dv9823em notebook and one of my friends formatted my recovery partition drive. for some reason i didnt make recovery cd either now i want to reboot my notebook, it wont let me. is there anyway i can reboot it?
View 3 Replies View RelatedI want to boot my vista, and I cant make it do that, all it wants to do is boot the RP.
View 8 Replies View RelatedI just bought HP Pavilion DV6t 2000
I have tried to split to the C partition into 2 partition with "Paragon - software"
after it finish the machine reset and didn't boot again I tried to do recovery but it doesn't load, i manage to install another version on windows 7 home when i log in the machine i found that the recovery partition become dynamic and still cant boot from it
I tried to get HP backup and recovery manager for my lap but i cant find this version now i Need to do recovery what i should do
I have attached a screen shot of my disk management
I bought an HP-DV6 1045EE, but I didn't like the partition scheme..
This was the way it first was:
C:Local Disk [288gb]
D:Recovery [10gb]
C was preloaded with Windows Vista. I shrunk the partition using Vista's Disk Management as much as I could, and shrunk it further to 50gb using Gparted. After doing this, I couldn't boot into Vista anymore. So I restored the image using the recovery manager.
I then created another 50gig partition for Win7, and installed it. All well and good.
Then I created an extended partition out of the remaining space, since all other partitions were primary, and created two logical partitions, 1 unformatted and the other NTFS.
After this, I booted into Vista and saw that my recovery partition had turned to unallocated space, even though I'd made sure not to touch that partition no matter what...
System - HP Envy14-1200 Beats Edition Notebook PC Series - Product # XQ103AV. Â It came pre-installed Windows 7.
Â
Error message "We couldn't create a new partition or locate an existing one. Â See the setup log file" appears during fresh installation of Windows 8.0.
Â
MS Windows 8 installation DVD detects the hard drive OK.
Mini Tool Partition software (3rd party) detects the hard drive OK.
Â
Both Windows 8 DVD and MiniTool software detects the disk partition and its formated OK, but the error message appears to prevent it from installation.
Â
These are steps that I tried to resolve the problem, but it won't work.
Â
1. Used Microsoft Windows 8 DVD diskpart to clean HD, partition and format........still get the same error message.
2. Used Microsoft Windows 8 DVD diskpart to clean HD and partition....................still get the same error message.
3. Used MiniTool Partition software to clean HD, partition and format........still get the same error message.
4. Used MiniTool Partition software to clean HD and partition....................still get the same error message.
5. Purchased a new hard drive repeat step 1 - 4 and I got the ......same error message.
Â
Background
I upgraded to Windows 8 from Windows 7 and it worked for a 2 month, then I upgraded to Windows 8.1. After the system is upgraded and rebooted, the screen turn black. Â So I decided to re-install Windows 8.0. There is no SIM/SD card in the laptop.
HP pavilion model -17-e054ca
Â
After upgrade to Window 8.1 PRO I seeC: 932 GBD: 28 GB -listed as recovery. I want to save system image backup Currently to create system image backup I have only option to create image on external drive or on D:
1. Is possible without reinstalling windows create new partion E: in order backup system images to it?  If yes how create new partition in win.8.1?
2. if partion E: will contain system image(s) can I boot from usb recovery disk and choose restore from one of system images located on E:
3. If for some reasons I want to reinstall OS from set of recovery DVD(s) to factory setting what is going to happen with partion E:
4. what is purpuse of D: marked as recovery?
I bought a HP-Pivilion DV14-1551dx a month back and I haven't created recovery discs yet. After a month of usage I suspect some virus and spyware in my laptop because some of my friends browsed unprotected websites. Will the virus and spyware affect the recovery partition? Now if I create a recovery disc from the recovey partition will it be safe to use those discs or will it be affected by virus and spyware?
View 3 Replies View RelatedI have a new 2530p here. When I start it up it shows a screen where I can choose what language I want to install of Windows Vista.
If I choose a language, can I later recover the laptop to it's original state, so I can choose the language again?
I own an HDX16T. Day 1, I burnt RECOVERY DISKS and then I proceeded with a clean install with a new vista install.
I decided to try to restore the notebook with those recovery disks. Guess what? It appears that you can no longer use those disks without having the original HP RECOVERY PARTITION?
I just simply can't use it anymore. I can't restore my notebook to factory condition anymore. The only option I have is to Click "FINISH" and reboot.
i have a dell studio 1537 laptop and the recovery partition D.
I have seen also the file factory.wim in D:dellImage.
Now how can I burn my recovery partition to 2 bootable DVDs to recovery windows everytime I want?
I am going to install a SSD in my G510 and would like to know if it is possible to create a recovery DVD as my usb has only 100gb remaining and a full system back-up takes 288gb
View 3 Replies View RelatedOne of my users has a Vaio SR and is trying to create recovery discs (DVDs) using Sony's tool. Sony's application fails at 24% every time with the following error:
"The disc could not be created.: Missing source folder or files."
It's running Vista and is pretty new, although they repartitioned the drive recently have installed a lot of additional software and may have uninstalled some Sony software. I'm thinking these could be the cause.
If not, any recommendations for third party software that provide similar functionality (full system backup images to disc)?
I have created a set of "System Recovery" (Reinstall Disk) DVD's for my inspiron 15 7000 laptop.I removed the traditional Sata HD from the laptop and installed Samsung Evo 840 SSD. Connected an external DVD drive and booted using the System Recovery Disk 1.
The files started loading but after half were loaded gave error of something like 0x8xxxxxx and asked to reboot. The same error occurred after another reboot.The Recovery Disk are fine as i have verified them using dell backup software.Also is it possible to create Dell Recovery partition (O/S and drivers e.t.c) somehow on the new SSD if i install Windows 8 using the OEM disk straight away?
I have windows 8 in my T430....I just wanted to know the detailed procedure for creating the recovery for it..
View 1 Replies View RelatedI just bought a G505.  The Control Panel option for creating a recovery drive ony seems to offer USB flash drive as an option.
Â
Is there a way I can create a recovery CD-ROM?
