Which one do you recomend for casual gaming?
8540p with 5100M or 8540w with 880M
Price difference is minimal, so i'm going for a configuration that will offer better gaming performance
If Dell knows anything about it on your machine, the warranty WILL BE VOIDED, and no support will be given!
Disclaimer
By performing this overclock you risk permanently damage (not reversible) your graphic card of your laptop and it's components, the motherboard and or other components in the laptop.
Your warranty on your system does not cover overclocking. Remember that the GPU is soldered onto the motherboard and can't be replaced yourself (a new motherboard is required). Dell laptop motherboards are very expensive ........
I reloaded my XPS finally (got tired of the dell build). I used the instructions from this forum. And the drivers. I used Vista Ult wSP1 builtin. I used LV2G driver 175.8 which got decent reviews on their site. SP1 apparantly includes the sli patch as it said I didnt need it when I tried to apply it.
Ran 3DMark. and got under 9K?
I've a question about dell lattitude and dell lattitude.
These two laptop've a different graphic chip. Which one is better for some 3d program like Sketchup, CAD, 3DSMAX. I prefer on Lattitude e6400 , It's look slim and good design. That's OK. But I've a question about a GPU in this laptop. Can it play some games?
- The Sim2
- Need for speed
- Pro Evolution Soccer
If I compare Quardo NVS160 & GFORCE 9300. Which one is better for some 3D program? Quardo NVS?
- Quardo NVS160 & Quardo FX370 - How about a diffrent?
Lattitude or Precision?
I just received from ebay a nvidia Quadro 770M 512MB
Quote:
[url] or[url]
as an upgrade for my HP 8510p which currently has ATi HD2600 256MB.
Both cards are MXM II (physically fit) however I'm afraid that this VGA is not on whitelist so it's not going to work - I only get blank screen, no error message, no POST, no chance of entering BIOS. I read that there is some tool that can modify BIOS - something called HP Tattoo utility however maybe it's obsolete now and has been replaced by some other utility - I can't even download it anywhere.
if the hp hdx is good for gaming ?
Here are the specs im getting
the single video card ( only available )
130m
4gb ddr3 memory
quad core processor
Crysis is an afterthought, so just the regular other games . I had a sager with
2gb ddr3 m
2.5 dual core
and 8800 gtx, and ran all the other game almost greatly except far cry 2, which had a bit of frame rate, and crysis . But I could play both at high, far cry 2 without any frame rate, but crysis with a bit .
I have a dv7-1135 nr laptop .. spec's are as follow's amd turion x2 rm-70 cpu speed is 2.0 each core. the problem I notice is that my cpu is slowing down at the wrong time.
I use the program cpu to determine that my cpu is dropping sometimes as low as 500mhz .
I know that laptops have a throttling function but i have that disabled . I have looked in the bios for that feature also and can not turn it off. can someone please Help as i do notice an extreme loss of power during gaming .
which one of these games better?
View 4 Replies View RelatedI'm probably going buy and HP laptop soon, the HDX 16"...
So therefore, I was wondering how the gaming is on your sexy HP. Not graphically wise or fps and such, but temp wise. For instance, how long do you get to game for before things get too hot or do you manage to keep things at decent temps for a full day worth of gaming
Personally I don't play too intensive games, mostly world of warcraft. Nothing hardcore like crysis and stuff. So i'd imagine i'd get some decent gaming hours as long as i keep things cool haha by getting a zalaman pc cooling pad and if i decided to undervolt.
I have dv7 with Intel Core 2 duo 2.4 and 512 Nvidia as my main entertaiment computer.I have few games which I like to play from time to time.Anyone do same with dv7?
I can play on full specs on CS Source but on Crysis I can play at medium and medium hgraphics to be perfect.
i want to play games on my laptop but every game i install has low fps for e.g wow, guild wars, gta and etc games like that i went on to can you run it site thing and i sed my cpu processor is too low but it cant be i have a amd dual core rm 70 any suggestions on what to do? my laptop is only 3 months old it is basically new it has 3gb ram 160gb hard drive nvidia geforce 8200 so it cant b any of dem
View 8 Replies View RelatedBuying a new laptop soon... choices are a HDX16t (P8400 and Nvidia 9600M GT 512MB) or a DV6t (T6400 and ATi HD 4650 1GB). I'm just looking to play Everquest 2, and even though it's a 2004 release, it's pretty intensive. So I'm wondering if I should deal with the slower CPU and slightly better GPU or vice versa?
View 5 Replies View RelatedHP has great customer service.....i have an hp compaq laptop and hp printer..and had great experience with customer service...they come to your place to collect n everything.
but one problem..they never seem to make laptops with high end specs...all their laptops have great design, great secondary features..but the specs never touch the gaming level.
especially the graphic cards.
of course they made the 20" dragon..but i am talking about smthg in 15 - 16" area.
are there any models out yet which have atleast 8600M GT?
I dont really want to bother reading through the enormous lounge topic, but has anyone tried out gaming on the DM3Z with Radeon 4330?
I'm specifically wondering how CoD4/5 plays and if you think CoD: MW2 would be playable on it (assuming I decide to get it,will wait for reviews).
It has the ability to plug in RCA cables but when I tried to play Wii on my laptop today there was a slight delay that would make it impossible to play.
View 9 Replies View RelatedCan any ENVY owners (any model is fine), comment on the cooling system, hardware temperatures, physical temperatures, etc.? And if anyone knows about the cooling system/features/vents for the ENVY 14.
Also, compare ENVY's gamingability to the m11x, MSI GE600 or MSI GX640, if possible.
Having an issue with my Envy. As soon as I got the machine I installed a SSD and clean copy of Win7. Drivers were downloaded from the thread in this forum section. The computer seems completely fine, temps are well within normal range (68c load CPU 74c load GPU). Besides the crashes, I have not experienced any other sort of instability with this machine.
The issue is an annoying hard lockup-my games will completely lock up and go into an infinite sound loop. The only remedy is a hard reset-I can not access the task manager or any other Windows functions. This happens at seemingly random, whether it be 5 minutes into a match or 2 hours in. The crash is not being triggered by heat-my system stays very cool, even during gaming.
The crashes seem to happen in any 3D game (but not furmark, for some reason)-at first I thought it was an issue with Bad Company 2, but after having time to muck around, I've realized that it is happening in all my games (including Just Cause 2, Team Fortress 2, GTAIV, Trackmania, Battlefield 2, etc).
I can't think of any reason why this is happening-I have a relatively clean Windows installation (need to save space on SSD) and up to date drivers. The only program I run in the background is NOD32, which has not given me any issues in the past with my other machines (I have tried disabling NOD32, to no avail).
My best guess is that it is video driver related. I have tried the Catalyst 10.4 driver from HPs website, as well as the 10.x ALL 8.74 beta driver-the 8.74 driver unlocks more resolution options and fixes BC2 load times, but both drivers are susceptible to the crash.
I aquired this Laptop in...October 2009. I'm really happy with it, but I have a question.
It reaches high temperatures while gaming, about 90º-95º and it's keeps around 70º in idle.
I haven't noticed any problem with performance or anything, only the fan kicks really high as soon as I start a game.
Is it normal? I always heard that AMD Cpu's are hotter than Intel.
What the latest Dell notebook is available nvidia quadro as its graphic card?
View 6 Replies View RelatedI am a fully certified DCSE for dell and I was just certifying today on the 2008 systems and noticed that the vcard instructions for the M1710 are identical to the Precision 6300.
the X800 really had 16 pipes, you can damm near oc the 7900GS' core double, amongst other surprises... It would explain why dell may have held out on this card until the dual 8800's came out for the M1730... Who would buy a 1730 w/8700's when you can get a new card for your 1710... Timing me thinks... It wouldn't hurt dell too much to release that card now since the duals are out and are obviously faster...
earlier this year I moved to vista , having good performance under games and a 3dmark05 score of 6500-7500.. , over the course of the year I had many reinstalls cause I wanted to check both X86 and X64 versions of Vista , and decided to stay with x64.
now I don't exactly know when exactly it happend - but a few months back I noticed my 3dmark05 score went down to 3300-3700 , well I thought .. maybe just a bad driver , so over the last 2 months i've tried many driver versions (155.xx , 156,xx , 169.xx from Laptopvideo2go and NBF) and I had the same results with all , I did fresh driver installs so thats not due to bad install or anything like it.
since I'm Currently playing WoW only :P I don't have any other benchmarks to run , Aquamark doesn't work under x64 and I don't know about any good benchmark tools.
something else I noticed which im sure is relevant - I remember that before having those problems my Temps went to the roof while gaming (93-94c) and 73c when idle , now with the new sets of drivers I have about 83c when gaming and 67c idle , now don't get me wrong .. im happy with those temps , but that also means my card doesn't stress itself to the max.
my 1st guess was Powermizer feature , Tried disabling it in the nv_disp.inf without any luck.. I'm not too sure if I managed to disable it.. GPU-Z always "sees" my clocks (500/600) at max.
I also thought about installing an old driver version but honestly I don't remember which drivers were ok to use under vista x64.
so I would really appriciate Ideas , that is before I do format C: ( I really want to avoid it this time).
Dell 1705 , 2GB Ram , T7200 , Quadro 2500m.
I have been out of high school for two years now and working as a waiter and I am still living with my parents. My dad told me to do something with my life or move out .
Anyway, I decided to go to ITT tech for digital entertainment and Game Design. I guess my dad was glad because he said that I could have his old XPS M1710. Well, my buddy is in school for game design and said that I have to have Quadro graphics for game design.
But, I can't find anything that says that there is such a thing as Quadro with a M1710.
My buddy has an Alienware notebook so he is no help with my Dell, but he swaers that M1710s can have the Quadro. I tried calling Dell and they said that M1710 don't come with Quadros.
Anyway, is there such a thing as Quadro M1710? If so how do I get it. Do you need a new motherboard or is a card and how much would it cost me. Right now my M1710 has a ATI x1400 video and from what I read won't help me at all in school.
according to this site linkhttp://www.notebookcheck.net/Mobile-...ist.844.0.html
it appears to be apart from a few minor things but basically were talking 280m power here ?
Why is a lot of people on ebay selling the m2400 with a quadro fx 380
Dell dont have the 380 on their homepage and i cant find it on nvidias homepage eiter
My laptop is a D630 with Windows Vista 32 which otherwise was working perfectly.
First the facts:
-Starting last week, my screen started to switch off without apparent reason requiring a hard reboot each time it happened since nothing else worked to bring it back to life.
-Then it started getting worse, one of the times I rebooted I got a split screen (two identical bad quality images one on top of the other) and the only way I managed to get out of it was to disable the nvidia driver (I had already tried to revert to the previous one and it was failing as well). Only problem with that is that playing video with the Nvidia disabled is a nightmare since the image slows down a lot and it's not synchronized with the sound.
-I tried to install the latest drivers from Dell (it seemed to be working then), and then I installed the latest ones from Nvidia and started having problems again.
-At some point during all this, my Windows lost the ability to suspend or hibernate.
-When I thought about restoring the system, it was already too late to go back to before the problem started, since all the available restoring points where more recent than that. (I know, slow reflexes on my part). I still tried to restore to when the new Dell drivers were working but the restoring failed (several times).
-Once or twice I managed to re-enable the driver and make it work for a few hours but the "screen turn off" eventually appears again.
Now the questions:
-Does anyone have a solution for this?
-Has it happened to anyone else? I searched D630 and Nvidia in the forums but all the threads I found were from 2008 and older.
-What's the next step, what should I do now?
-Would re-installing Windows be the only option, or it wouldn't help at all since I'd still have a driver problem?
I'm starting to get some weird video symptoms on my Latitude D830 with the Nvidia Quadro NVS140M video. Fairly random at this point, maybe once or twice a week, the screen does something weird in terms of displaying stuff that it completely shouldn't, even during boot-up.
Don't know if this chip is a member of the family of Nvidia chips that suffers from the bugs, but has anyone else experienced this with a heavily-used Latitude D830 yet?
If I have to get a new motherboard, has Nvidia actually implemented a solution, or are they still shipping the same parts? I have ~3 years of warranty left (plus the bonus year), but I don't look forward to a motherboard replacement every year or so.
I purchased an FX 1600M to replace my fried 7900GS. BIOS didn't recognize it. At the beginning of the boot screen I realized that the card was "engineering sample" and I couldn't install nvidia drivers by double clicking on the setup file because no compatible card recognized. I only could install them from the device manager by updating drivers and pointing out the extracted drivers folder. I use A09 BIOS and Windows XP.
Everest and gpuz say that the card is Quadro fx1600. On every speed setup ati tool showed artifacts, even with downclock!
However the card managed both 3dmark 05 and 06. Actually with good marks.
The card had 2 heatpipes but since my case needed modification I decided to change heatpipes with my old GF7900 gs. With 1 heatpipe I installed it in my Dell E1705. Can it be a heat problem that atitool showed artifacts? I also use i8kfan to check heat run and while gaming temperature went up to 84 degrees. Idle temperature was 60 degrees (corrected with gpuz). I will modify my case soon and install it with 2 heatpipes again.
Does anybody know about "engineering sample" gpu's?
i have an m90 t520 with 4gb ram and fx2500m,runing vista ultimate with dx10.
i try to run crysis and i cant get it to run with very high and on high it barely runs, i updated my gpu nvidia driver to 7.15.10.9808 , and still cant run it good , i tried to get a modified inf but my laptop kept on giving me the blue screen and crashes everytime i try to run crysis or even 3dmark06
if anyone can provide a working inf or a good driver with the latest inf modified installed that would be great.
and maybe an answear on why i can run the damn game on very high with dx10 even though my laptop is more then qualified to run it
dell m90 , t5200 core 2 duo,4gb ddr2 5400,nvidia quadrofx2500,wxga+ 1440.900.
some month ago i upgrade my bad 7900GS to a Quadro 1600M.
i have a great problem with internal monitor with a black screen.
now i use with external monitor and DVI and work
i try with a M90 monitor and work perfectly. i try my monitor with m90 and work.
what can i do? i read about flash with other bios but i don't understand.
i have to donwload bios of dell m6300? or i have to change my video driver?
probably new quadro card have different voltage.
i try also different OS: win Xp, Vista, Ubuntu, Win 7
I just modded my quadro fx3500m into a geforce 7950gt using the rivatuner. I did this because i thought the card would perform better while playing games. However there was no improvement and some games like NfsProstreet became slower. My 3dmark06 slipped from 5867 to 5734.Has this happened to anybody else,or did i go wrong somewhere?
View 11 Replies View Related