I just brought my friends Laptop home today, a HP dv9500. I happen to have the same one. Her's would not start i notice that when you plug the power adapter in the blue ring lights up, although the battery is not being charged. If i swap batteries it will run until that battery is dead. If i remove the battery while plugged in it will not start.
View 6 RepliesI just recently bought a 12-Cell battery for my DV2730.
My original 6-Cell battery fails to charge anymore so my laptop would not power up just on battery power.
I'd like to know more on how to take better care for my new battery, and so my question is; does HP laptop, cuts off charging when battery is already full? Because i noticed that the "charge/lightning LED" does not stay ON anymore when battery is full. Is this a correct indicator? Or should i remove my battery when running on external power?
I made an impulse buy while i was there a new HDX9494NR . Anyway ive come back to Ireland to discover that the battery refuses to charge .
Ive installed 7 on it to see if an os change would help but its the same as the factory os .
Im not sure if this is just a simple dud battery or a problem with the laptop .
i have a pavilion 2400 which i had sent in a week ago because there was no video. i guess they changed the motherboard, but they fixed that issue.
however, ever since getting the laptop back, the battery doesn't fully charge. only goes up to 66%.
i have my computer (win 7) set to high performance. I also keep it plugged it but it hasnt been charging my battery, its down to 35%. Does it have some sort of a cycle function where it waits until the battery is drained and then charges it back up? I dont want it to do this because when i need to use it on the go i would like a full battery.
View 4 Replies View RelatedI've got an HP Compaq nw8240 and when I move the mouse over the battery icon it says Plugged In, Not Charging. It only shows a 40% charge too, and if I unplug the AC adapter the battery will drain and then recharge back to 40% again.
I'm running the latest version of Windows 7 also.
I've also tried updating the BIOS but when I download the file from HP's support site it and run it all it does is restart my computer and nothing changes.
Battery will no longer take a charge. I can use a different adaptor and I have the same problem. I can take the battery out and re-charge it in my Presario v5000 without any problem using same power brick. ergo no battery or power brick problems.
HP will only run on battery power. When power is plugged in green lite flashes and battery icon says it is charging, but it is not.
It will not run on AC.
I bought this HP Pavilion DV6-1160en laptop about 4 months ago and it was working wonderfully until recently. The problems started a few weeks back when I was playing NBA 2k9 and the screen started going dim and back to fully lit and back to dim every 20-30 seconds...
I rebooted as I expected it to keep doing that even with the game off.. and when it came back on it worked just fine. There are no problems with it until I start playing a game (any game, not just nba).
When playing I kept an eye on the light next to the charger connector and that was blinking along with the screen... so when I got annoyed I just changed the battery settings to keep the screen fully lit while on battery.. until a few days back the laptop went to hybernate in the middle of me playing a game because the battery died (although the charger was plugged in and the light on). The battery charges to 100%, holds a solid hour and a half, HP battery check rates it at 'good'..
I have an older Inspiron 6400 (looks like the 1505) that isn't charging the battery. The bios indicates that the battery is charging, and that it is performing normally. There isn't a red flashing battery indicator, but when the laptop is powered on there isn't any "green light" indication of the battery, either. The AC adapter performs normally ( Charger is a PA10 (90watt) and it works fine on my D800, and charges that battery normally).
What I don't understand is why the BIOS indicates the battery is charging and that the battery is performing normally. However, when I have the system up and running there isn't a green battery indicator light on the button strip. Let me clarify that statement. During the initial boot phase of start-up there is the green indicator light on the button strip, but as the OS finishes loading this light goes out and the battery doesn't charge.
Could this be caused by a faulty Bios update, or is it something with the battery charging circuit of the motherboard? The laptop operates normally when using the AC adapter, just no indication of the battery charging when the OS is fully loaded. OS is Windows XP Pro (SP3).
My Laptop is 1 year and 5 months old. There are 2 problems I am facing with my battery:
1) When it is charging, at around 86% level, it stops charging and I see an orange light blinking at the battery icon and it continues to blink unless I turn the power off and allow the battery to discharge for a while.
2) at around 45% to 50% level, the battery level suddenly drops to 7% level and then I have to charge again.
Because of these issues I now use my laptop as a desktop. It is always plugged in and I use the option of "Stop Charging" in the windows power settings. how to solve the problem.
I have had my Dell Inspiron 1525 for around two years. For the past month, when my power supply is plugged in, the battery does not charge. It has been stuck on 3% and will automatically shut down when unplugged.
I have seen that this is a very common problem, however, when hovering over the battery icon it says: plugged in, CHARGING, where as all of the other posts that I have seen say: plugged in, NOT charging.
I have tried taking the battery out and restarting but this did not work. I also drained my battery and tried to recharge but again, this did not work. My initial thought is that I may need a new battery but I just wanted to check first.
I'm going to clone and replace my c drive on my hp dv9500. it's a factory 100gb model.
looking to not break the bank and stay around $80 max and looking for a 200-320 gb hd drive.
I work this computer hard so the drive needs to be able to handle the stress.
any recommendations on a hard drive? what about cloning software that works via usb port?
Last night I was on my computer working on a graphic design project for school (was running Photoshop) when the screen went a weird purple color and then completely blank after a minute or so. The computer was still running, however, and pretty hard at that, so I shut it off. Since then, whenever I turn it on the screen shows up split into four, equal, horizontal parts.
If I do not touch anything, it will continue to show the Microsoft loading screen, but then shows a blue screen for a few seconds then reboots. Screen Pic
If I press Esc at the initial restart Screen Pic, it launches "Windows error recovery" and gives a choice between using 'Launch Start Up Repair' and 'Start Windows Normally' Screen Pic. It will not start up Windows (Vista), instead it reboots the computer and starts all over again. When I try Startup Repair Screen Pic, after a few minutes, it asks me if I want to restore my computer using System Restore. After about 10 minutes I get a message saying that it cannot repair the problem automatically.
i'm thinking about upgrading my HDD's now. I've got an itch for better and bigger SSDs. I was thinking of buying a pair of Intel 80GB G1 or G2, OCZ Vertex 60GB, or OCZ Agility 60GB SSD's and put them in Raid0 on the laptop.
Currently I have a crappy a$$(OCZ Core series V2) ssd and a 5400 rpm hdd in the laptop atm, but i was thinking of getting something much faster to go with my T8300 CPU doing RAID0 on a 5400 or 7200 rpm hdd is dumb because of the heat issues... but RAID0 with SSD's would be just AWESOME. I have never dose RAID0 on a laptop before so i was wondering if its even possible to do it on a HP DV9500 laptop? My roommate has the Gateway FX with that 1900X1200 screen and he has RAID0 on his hdd's from the factory, so i was wondering if its possible to do it on the DV9500?
I have a HP dv9543cl that was purchased at Costco sometime in late 2007. My nVidia 8600m GS in the laptop started to break down in the summer of last year by presenting symptoms such as system lock-ups, freezing, unable to boot the computer due to video problems, etc. Eventually, the video card finally died in March of this year.
So I recently sent it in to HP (apparantly I had a 2 year warranty on the laptop... something I didn't know. Heh.) I told them of the nVidia issues and etc. so they agreed to replace my motherboard.
I got my laptop sent back to me by HP today with a replaced motherboard and keyboard as a bonus I guess. Anyway... looking in GPU-Z, I notice something strange from the original specs of the nVidia 8600m GS. The GPU clock speed and the memory speed is lower than specified on the nVidia website.
Also, I'm wondering, with this replacement... will this video card die eventually also? Or has nVidia given HP a new 'batch' of chipsets to replace the broken ones?
Here's a pic of my GPU-Z:
Also, my nVidia card is running (idle) at 69C. Is this normal/not unusual operating temperature?
ever put a T9500(2.6ghz 6mb 800mhz) or something faster into a Dv9500? I tried doing a search but couldn't find anything.
View 6 Replies View RelatedI got a Dv9500 although the lid says its a Pavillion DV9000 and I am dying for the ethernet driver and the OHCI Compliant IEEE 1395 host controller drivers.
View 3 Replies View RelatedLooking at one drive, in both areas area 1 is always significantly hotter than area 2's. A 15 C increase.
Is it possible to set a single harddrive in the 2nd HDD area (farther away from the CPU and GPU that are causing all the heat), with the 1st area empty?
I tried simply moving it from area 1 to area 2, and it said it couldn't find the OS. Is there a way to fix this without reinstalling?
I was doing absolutely nothing and suddenly my screen started acting wierd. What would cause this? I think its not about drivers cuz the same thing happens during bios start up.
View 5 Replies View RelatedWhat are my options for upgrading DV9500's to have internal Bluray?
Any burners available?
Are the DVD units in the DV9500 IDE/ATAPI or SATA?
Is this drive an option:
Sony NEC Optiarc Black 2X Blu-ray Combo Drive E-IDE/ATAPI Model BC-5500A
I have an HP Pavillion dv9500. It worked perfect up until about two months ago. One day I turned it on and the screen wouldn't show anything. The computer actually turns on and all of the keyboard lights turn on but the screen is blank. It seems like the backlight lights up because the screen turns into that light grayish color but it doesn't actually show a picture. I've hooked it up to my tv using an HDMI cable and I don't get a picture on the tv either.
I've read about people having the same issue with their HP pavillion and have tried numberous fixes from other forums online, but nothing has worked.
I have a HP DV9500 laptop with Vista. For the last 2 days I am encountering an issue where the Laptop would freeze 5 minutes after logging in. Then there is no HDD activity and the computer can only be shutdown by holding down the power button. I tried working with the "Safe Mode with Networking" option and this issues never comes up. I kept the system running for almost 5 hours in Safe mode still there was never an issue.
The Freezing only happens in the normal mode. If this was an Overheating/Hardware isssue then irrespective of the Mode the error should have occured is my thought. Overall the system was very fast even in the normal mode before this issue occured. I am also running coretemp software and the temperature is always around 35 Centigrade. Some times it goes up to 45s. But overall it never crossed 50. So i am not fully convinced it it is overheating issue.
The latptop is around 2 years old. Last year during the warranty period there was an motherboard issue and HP replaced my motherboard for free.
Would a system restore do any good if this is typically a hardware issue. I am unable to decide weather it is an hardware issue or a software issue.
I may have to replace my fan assembly for a dv9500. There are 2 different parts, one for discrete video system memory and one for UMA type memory. Any suggestions on how to determine the type I have? I have had no luck finding it in the device manager.
View 6 Replies View RelatedI have a HP Pavilion dv9500 notebook and yesterday after more than two years of pretty much running smoothly it wouldn't boot. First it actually booted into windows but the whole desktop screen was frozen with mouse cursor. So I turned it off, turned it back on and it booted into blue screen and restarted itself. After couple of tries I booted into safe mode which was running fine.
I wasn't sure what the problem was but I was thinking it must be software related, so I loaded an image of my system which I've used before and knew was ok. But even after putting a brand new OS it was doing the same thing.
One time I was actually able to boot into normal mode so I thought maybe the issue got resolved magically. But, I have my external monitor plugged in and even when in normal mode the signal wouldn't go through, so I had to use my laptop monitor. I kept trying to switch the signal and even though it was showing the icon like it's transferring nothing happened. So I checked my video card properties and the card all of the sudden had no drivers and was basically unrecognized by the OS.
My E1705 battery refuses to charge. I had a bum power adapter which I had replaced. Got the new one today and it still won't charge my battery.
What occurs is that I plug in the power and the battery icon in Win7 indicates it is charging. The charging animation in Win7 continues until your battery is charged. But in my case after about 30sec the animation stops, and show a quarter charge and never fully charges.
This indicates a faulty battery I'm assuming? It wouldn't be the power port would it?
We purchased my wife's Sony SZ680NWC back in May 2008. Used it mostly tethered to the wall for 10 months. We then used it on and off with battery until early June 2009 and packed it away.
Yesterday, I turned it on with the battery in and tethered to the wall so I could back up some data.
The battery light was blinking and Windows XP shows that it was charging. It remained at 0% for hours. I turned it off and left it plugged in so the battery could charge. I woke up this morning and found that after 10 hours, the battery light was still blinking. Turning it on, I found it was still at 0%! There's no power to even run for 1 second unplugged!
I've unplugged the battery and power adapter. Held the power button and put the battery and power adapter back in. Still doesn't charge.
I'm stumped. It indicated that it's charging so I assume the charger and battery connectors are ok. Can't imagine how a battery can go south while in 6 months of storage.
The battery is the stock battery I got with the system, a VGP-BPL9 6 cell Sony extended battery.
Not sure if it's the same problem as adamcirillo (without a solution in the end) or this one from danS_GER (though his did not blink to indicate charging status, mine does).
I got myself the Dell XPS13 about 2 months back. I noticed that the battery does not charge beyond 91%. How do I fix this issue.
View 6 Replies View RelatedI just bought a new Dell 1525 from Future Shop. I currently have ac power plugged in, for the battery it says 92% available but it's not charging? Will it eventually go up to 100%?
View 3 Replies View RelatedMy Dell XPS 1530 can operate using an iGo everywhereMAX laptop adapter with the 202 tip, but it will not charge the battery, even when the laptop is a sleep or powered down.
View 7 Replies View RelatedI have a two years old XPS M1730. A couple of months ago, the battery stopped charging even when plugged in. The battery light flashes red the whole time.
I have been told this may be a charger issue - do you guys agree? I'm out of warranty, so could do with the cheapest options first