Looking at one drive, in both areas area 1 is always significantly hotter than area 2's. A 15 C increase.
Is it possible to set a single harddrive in the 2nd HDD area (farther away from the CPU and GPU that are causing all the heat), with the 1st area empty?
I tried simply moving it from area 1 to area 2, and it said it couldn't find the OS. Is there a way to fix this without reinstalling?
I'm going to clone and replace my c drive on my hp dv9500. it's a factory 100gb model.
looking to not break the bank and stay around $80 max and looking for a 200-320 gb hd drive.
I work this computer hard so the drive needs to be able to handle the stress.
any recommendations on a hard drive? what about cloning software that works via usb port?
Last night I was on my computer working on a graphic design project for school (was running Photoshop) when the screen went a weird purple color and then completely blank after a minute or so. The computer was still running, however, and pretty hard at that, so I shut it off. Since then, whenever I turn it on the screen shows up split into four, equal, horizontal parts.
If I do not touch anything, it will continue to show the Microsoft loading screen, but then shows a blue screen for a few seconds then reboots. Screen Pic
If I press Esc at the initial restart Screen Pic, it launches "Windows error recovery" and gives a choice between using 'Launch Start Up Repair' and 'Start Windows Normally' Screen Pic. It will not start up Windows (Vista), instead it reboots the computer and starts all over again. When I try Startup Repair Screen Pic, after a few minutes, it asks me if I want to restore my computer using System Restore. After about 10 minutes I get a message saying that it cannot repair the problem automatically.
i'm thinking about upgrading my HDD's now. I've got an itch for better and bigger SSDs. I was thinking of buying a pair of Intel 80GB G1 or G2, OCZ Vertex 60GB, or OCZ Agility 60GB SSD's and put them in Raid0 on the laptop.
Currently I have a crappy a$$(OCZ Core series V2) ssd and a 5400 rpm hdd in the laptop atm, but i was thinking of getting something much faster to go with my T8300 CPU doing RAID0 on a 5400 or 7200 rpm hdd is dumb because of the heat issues... but RAID0 with SSD's would be just AWESOME. I have never dose RAID0 on a laptop before so i was wondering if its even possible to do it on a HP DV9500 laptop? My roommate has the Gateway FX with that 1900X1200 screen and he has RAID0 on his hdd's from the factory, so i was wondering if its possible to do it on the DV9500?
I have a HP dv9543cl that was purchased at Costco sometime in late 2007. My nVidia 8600m GS in the laptop started to break down in the summer of last year by presenting symptoms such as system lock-ups, freezing, unable to boot the computer due to video problems, etc. Eventually, the video card finally died in March of this year.
So I recently sent it in to HP (apparantly I had a 2 year warranty on the laptop... something I didn't know. Heh.) I told them of the nVidia issues and etc. so they agreed to replace my motherboard.
I got my laptop sent back to me by HP today with a replaced motherboard and keyboard as a bonus I guess. Anyway... looking in GPU-Z, I notice something strange from the original specs of the nVidia 8600m GS. The GPU clock speed and the memory speed is lower than specified on the nVidia website.
Also, I'm wondering, with this replacement... will this video card die eventually also? Or has nVidia given HP a new 'batch' of chipsets to replace the broken ones?
Here's a pic of my GPU-Z:
Also, my nVidia card is running (idle) at 69C. Is this normal/not unusual operating temperature?
ever put a T9500(2.6ghz 6mb 800mhz) or something faster into a Dv9500? I tried doing a search but couldn't find anything.
View 6 Replies View RelatedI got a Dv9500 although the lid says its a Pavillion DV9000 and I am dying for the ethernet driver and the OHCI Compliant IEEE 1395 host controller drivers.
View 3 Replies View RelatedI was doing absolutely nothing and suddenly my screen started acting wierd. What would cause this? I think its not about drivers cuz the same thing happens during bios start up.
View 5 Replies View RelatedWhat are my options for upgrading DV9500's to have internal Bluray?
Any burners available?
Are the DVD units in the DV9500 IDE/ATAPI or SATA?
Is this drive an option:
Sony NEC Optiarc Black 2X Blu-ray Combo Drive E-IDE/ATAPI Model BC-5500A
I have an HP Pavillion dv9500. It worked perfect up until about two months ago. One day I turned it on and the screen wouldn't show anything. The computer actually turns on and all of the keyboard lights turn on but the screen is blank. It seems like the backlight lights up because the screen turns into that light grayish color but it doesn't actually show a picture. I've hooked it up to my tv using an HDMI cable and I don't get a picture on the tv either.
I've read about people having the same issue with their HP pavillion and have tried numberous fixes from other forums online, but nothing has worked.
I just brought my friends Laptop home today, a HP dv9500. I happen to have the same one. Her's would not start i notice that when you plug the power adapter in the blue ring lights up, although the battery is not being charged. If i swap batteries it will run until that battery is dead. If i remove the battery while plugged in it will not start.
View 6 Replies View RelatedI have a HP DV9500 laptop with Vista. For the last 2 days I am encountering an issue where the Laptop would freeze 5 minutes after logging in. Then there is no HDD activity and the computer can only be shutdown by holding down the power button. I tried working with the "Safe Mode with Networking" option and this issues never comes up. I kept the system running for almost 5 hours in Safe mode still there was never an issue.
The Freezing only happens in the normal mode. If this was an Overheating/Hardware isssue then irrespective of the Mode the error should have occured is my thought. Overall the system was very fast even in the normal mode before this issue occured. I am also running coretemp software and the temperature is always around 35 Centigrade. Some times it goes up to 45s. But overall it never crossed 50. So i am not fully convinced it it is overheating issue.
The latptop is around 2 years old. Last year during the warranty period there was an motherboard issue and HP replaced my motherboard for free.
Would a system restore do any good if this is typically a hardware issue. I am unable to decide weather it is an hardware issue or a software issue.
I may have to replace my fan assembly for a dv9500. There are 2 different parts, one for discrete video system memory and one for UMA type memory. Any suggestions on how to determine the type I have? I have had no luck finding it in the device manager.
View 6 Replies View RelatedWhen I look at my notebook's screen at an angle, an area at the bottom of the screen looks to be visibly lighter than the rest of the screen. There is also a small spot at the bottom of the screen that always looks lighter than the rest. Is this kind of thing considered relatively normal for an LCD?
View 7 Replies View RelatedI have a HP Pavilion dv9500 notebook and yesterday after more than two years of pretty much running smoothly it wouldn't boot. First it actually booted into windows but the whole desktop screen was frozen with mouse cursor. So I turned it off, turned it back on and it booted into blue screen and restarted itself. After couple of tries I booted into safe mode which was running fine.
I wasn't sure what the problem was but I was thinking it must be software related, so I loaded an image of my system which I've used before and knew was ok. But even after putting a brand new OS it was doing the same thing.
One time I was actually able to boot into normal mode so I thought maybe the issue got resolved magically. But, I have my external monitor plugged in and even when in normal mode the signal wouldn't go through, so I had to use my laptop monitor. I kept trying to switch the signal and even though it was showing the icon like it's transferring nothing happened. So I checked my video card properties and the card all of the sudden had no drivers and was basically unrecognized by the OS.
Just received my HP Mini 1030NR and love the way it looks, size, everything..EXCEPT....that I have noticed a distinct vibration in the wristpad area on both sides.
As I was adding anti-virus and tweaking as I usually do, I noticed this vibration and wonder if this is an issue with SSD-based laptops.
Had my DV5T a couple months now. Thought it was a broken hardrive but I had them send me a replacement and I still here it.
It just sounds like a geiger counter somtimes... not sure if this is normal?
Many times the sound is there when I am not accessing anything from the hardrive.
Tends to happen alot when streaming or just browsing the net.
The 500GB HD in my DV7t just died. It's definitely dead, as I pulled it out and tested it in a caddy. When the computer goes to initialize the drive, it gets an error in the I/O device. I still believe I'm under my one year warranty from HP. Does it cover dead harddrives? And if so, do they require that I send in the dead drive? I work for a small business, though my boss has a rather strict data policy - all broken, dead, unused or outdated drives are to be turned into them for proper destruction prior to sale, refurbishment or replacement. Even when we send our laptops off for repairs, there are 'stock' harddrives we place in them that have never had sensitive company data on them. A bit paranoid, definitely, but it's company policy.
View 5 Replies View RelatedIs it normal for my HDD to make a beeping noise after normal use? All I am doing is watching YouTube (or do anything else) and it clicks then makes a loud beep.
View 10 Replies View RelatedI have a compaq nc6320 business notebook with a SeaGate Momentus 7200.4 that's done crashed 2 times what would be better than this drive with 7200 rpm's?
View 6 Replies View RelatedMy current harddrive for my hp dv 6263cl laptop need replacement, what size does it use 2.5" or 3.5"? On the hp website...Hp specs, it says it uses a SATA drive. So I bought this one from...Seagate internal harddrive. When I goto replace it, the connectors are different, the one I bought is like this...Seagate connectors, its a flat board and there is a rectangle usb size on the left seperate from the other ones. The hard drive connectors that came with the laptop looks like the seagate one except it's not flat, it's like a slot and it doesn't have the black covering on the bottom, like this...Pre-installed Harddrive connectors. Sorry I don't really know how to say it, but the new drive won't fit.
View 4 Replies View RelatedI am going to upgrade my dear HP elitebook 2530P with an additional harddrive insted of my optical drive, So I where browsing the Maintenance and Service Guide [url] .
On page 68 - It says :
-----
Secondary hard drive cage assembly, includes additional USB port (required for installation
of secondary hard drive
492574-001
-----
Secondary hard drive connector board (required for installation of secondary hard drive) 495027-001
-----
Secondary hard drive system connector board (required for installation of secondary hard
drive)
495028-001
-----
I am going to install a normal 2,5" disk, so which of them do I need ?
i bought my laptop back in october 2006 and it's been running strong ever since but over the years i've accumulated quite a big music and video collection and well it's 100gb harddrive just isn't cutting it, does anyone know what's the specs on the current harddrive in it? because i want to swap it out for a much higher capacity one i know that i can purchase an external harddrive but i just want to carry my collection everywhere with me
View 3 Replies View RelatedI've put an extra HD in a caddy delivered by newmodeus (converting SATA disk to the "PATA" connector in the DVD-bay in my 6510b - the harddrive is only able to read at 15 mb/s compared to the 100 MB/s when placed in the harddrive-bay (SATA).
Does anyone know if this is normal? is the the HP-connector or the chip in the caddy that is the bottleneck.... Any workarounds to improve the speed?
Ive tested both an intel x25M 80 gb and a Hitachi 7200 rpm 200GB in the caddy with the same slow performance...
Does Sony use HPA (Host Protected Area)?
What is the difference between HPA and Hidden Recovery Partition commonly used in all Sony notebooks?
How do I detect and delete HPA in Windows or with bootable cd?
So I ordered my Alienware Area-51 with a bunch of upgrades totaling at something like $5000 on January 22nd. It has been in the "In Production" stage for a while and today they sent me an email saying the delivery date was changed to February 23rd. It was initially supposed to be shipped by February 16th.
So I'm wondering if "In Production" means they have actually started building the computer, or if there is a chance they are still processing payment information. Is there any chance they haven't confirmed the payment at this point, I would consider canceling the order.
Secondly, when Dell gives you a delayed ETA, how often do they delay the system from arriving further? I'm worried that a week and a half from now I will get another email saying I won't be getting my system until March.
How is the area around where the palm rests for the Studio 15? I read one review where it said the palm areas get warm. Is this true?
View 10 Replies View RelatedI went to Best Buy to look at a Studio 15 model. I noticed the surface around the mousepad where you rest your wrists....
It was warm and it felt really soft...almost a bit sticky soft. Is that because of the clear finish?
I'd rather have a smooth surface than a soft one that feels like the smushy like varnish hasn't completely dry. Could this have been an anomily or would my model be like this if I bought one?
I bought DELL Studio 1555 last month.
I immediately noticed after working sometimes the touchpad area,specially the right hand top corner becomes alarmingly hot and I feel burning sensation on my finger tips.
It is the area where WLAN.WPAN,WI-LAN are present.There is also an Intel chipset,perhaps IO controller.
I immediately called DELL technical support and they sent me the DELL engineer.After monitoring the system for sometimes he decided to replace the motherboard,heat sink,fan assembly and thermal pad.
After replacement I am finding the scenario haven't changed and this time along with touchpad the mid area of keyboard is also getting warm.
on my HP Pavilion dv 9500 series laptop installing Windows 7 Ultimate, I get base system device error, base system device driver not found. devices are on - PCI bus 7, device 9, function 2. & pci bus 7, device 9, function 3. these are found in the device manager under other devices.
View 1 Replies View Related
