HP/Compaq :: HP Pavilion Tx2500z Volume Quicklaunch
Jan 8, 2009
i just received this brand new and when i press the volume up and down quicklaunch buttons .. the volume does go up and down but there is no onscreen notification of this ... if i scroll mouse over to the bell on the taskbar i do see that the volume numbers did increase or decrese...so i know the buttons are working ... even when i press the mute button.. i see the icon show that it is muted...
should this tablet have an onscreen popup notifcation when u raise and lower the volume...?
i contacted HP and they told me to do a system restore... after i tried to update my quicklaunch application and it still had no effect...
i want to make sure something is wrong with my tablet before i perform this system recovery...
View 10 Replies
ADVERTISEMENT
Jan 12, 2009
I just bought an HP Pavilion tx2500z and it was working for last week, when I installed some multi language dictionary that most probably was not compatible with vista and thighs went wrong, I was using the tablet mode so did not recognize that in a day later I found out the keyboard is no responding at all, even the audio buttons and the touch pad button are not, so I tried to system restore to previous date and then to first date but to no avail so I returned the laptop to factory default but still not working, is there a button or combination that inactivates the keyboard or it is fault in hardware
View 5 Replies
View Related
Feb 17, 2009
i just got my tx2500z and of course, i reformatted to a fresh install of windows. however, i forgot to make a backup copy of the hp wireless assistant which allows you to turn of wireless or bluetooth independently. i tried the install that came with another hp laptop but i ended up getting bsod's so i'm asking if anyone who has the same model could provide me with this software that came from the tx2500z compatible for 64-bit.
View 6 Replies
View Related
Mar 24, 2009
I want to install Windows 7, but the partition manager will only let me shrink my C partition by about 10 gigs - Windows 7 needs 16 gigs. HP_RECOVERY is another 10 gigs, and I'd like to delete it, but I don't know what it's being used for.
I saw someone say "burn backup discs, and then you're okay to get rid of HP_RECOVERY". I tried to burn backup discs using HP Recovery Manager -> Recovery Disc Creation. However, when I try to do this, I get the error "This computer does not have a drive capable of creating CDs or DVDs. Contact HP support." What a nightmare. I bought this tablet PC in January and I've barely used it at all because of how incredibly slow it is, even after removing the bloatware. I was told that Windows 7 would be faster, hence my trying to install it.
I do have the Application and Driver Recovery CD, and the 2 System Recovery DVDs from HP -I managed to have them send these to me. Are these the equivalent of what I'd end up with if my attempt to create discs with HP's Recovery Disc Creation would have been?
View 3 Replies
View Related
Feb 3, 2010
i have the new HP dv4 with i5 processor and i recently formatted the HD to do a clean install of win 7. i installed most of the drivers and they seem to work fine, however, i can't get that graphic splash animation to show whenever i adjust the volume, mute, or turn on/off the wireless quicklaunch buttons. where can i download the HP drivers or software for this? or how do i enable it if it already has it?
View 5 Replies
View Related
Mar 7, 2009
After some problems with software, I did a clean install of Vista Ultimate 64bit. I copied the Swsetup folder and used those drivers, downloaded some newer ones and some applications from official HP site.
It works all great, except the two QuickLaunch buttons: for Qmenu and WLAN. Nothing happens if I pressed them. They don't even blink! But the others work just fine - even the Fn keys.
I've tried reinstalling the QLB application and drivers for a dozen times with no change.
View 3 Replies
View Related
Oct 17, 2009
I have a hp tx2500z
When I turn on the power for computer there's a beeping noise coming from the hard drive I think and this message comes up in blue letters with a black background
" Boot Device Not Found
Please install an operating system on your hard disk.
Hard Drisk (XXX)
F2 System Diagnostics
When I run the system diagnostics for the Hard Disk Test, it says:
"Hard Disk Test Failed
Hard disk not exist"
What do I do? I went to the website but its suggesting that I basically may have to do a system recovery to the factory installed state...I have a lot of stuff I don't want to lose.
I also tried removing the hard drive and putting it back in, that didn't help either.
I called tech support and I still have my warrranty so I will be getting a Hp box to put my tablet in within a few days. But they told me I would most likely lose all the data I have saved.
Then I used a liveCD in hopes of backing up my harddrive but the liveCD won't even boot..unless im doing it wrong...( burn iso to CD, then load CD into laptop, and press f10? and/or turn on computer with CD inserted in and then let it load if it wants to?)
View 7 Replies
View Related
Jan 13, 2009
I just got a HDX 9200 last week and all this time I've been fiddling with tweaking the original HP image, installing clean Vista OSes (like twenty times by now), trying different drivers, running drivers-update scammers (like DriverDetective, RadarSync, etc.) just to look at the newest version number of the drivers, then crawling the web to manually find and try them, and so, and so on.
Of course, in the need of having a clean Windows Vista installation (since the HP image has a lot of crap, slowdowns, outdated drivers, not SP1 slipstreamed, etc.) I had to start from scratch.
After installing the clean Vista setup and all the drivers, I found that the QuickLaunch buttons were given me problems. What happened is, at the end, that everyone of them works BUT the TV button. I'm running on the QuickLaunch Buttons drivers 6.40, also QuickTouch installed for OSD, and QuickPlay 3.7 (updated from CyberLink) and still, when touching the TV button, nothing happens. Not even a click is hear like with the others. The strangest thing is that, if I turn the computer on by pressing the TV button instead of the power, it boots... and then it opens the TV module in the QuickPlay app.! Just as it should!................
View 7 Replies
View Related
Sep 10, 2013
Operating System - Windows 7 Home Premium 64 bit
Computer : HP Pavilion m6-1002sa
I cannot alter the volume with HP Beats Audio any more.
Pressing f9 ( volume decrease ) or f10 ( volume increase ) has no effect.
View 3 Replies
View Related
Aug 5, 2014
I have a HP Pavilion g6-2210sa, product number is C6S45EA#ABU Volume occasionally works fine, but mostly does not. It sometimes works when I turn laptop on and then after a few minutes it doesn't work. If I restart, it sometimes starts working again but mostly does not. I have followed HP instructions for audio problems on this website however I cannot seem to fix this.
View 1 Replies
View Related
Feb 6, 2009
Product Name: HP Pavilion DV7-1261wm
Product Number: NM295UA#ABA
OS: Windows 7 Ultimate (64-bit)
My computer gets all current HP/Microsoft updates automatically.My volume control moves up and down automatically. I can choose mute and it will not stay muted. I have turned off my built-in microphone. I had to unistall my HP SmartMenu controls because the buttons wouldn't respond and the on-screen volume display would activate every time the windows volume control would move causing me not to be able to play any games. I have ran MSE and MalwareBytes and have not found any viruses or ad/spyware that is causing the trouble. I don't' know what to do..I really don't want to have to go through the process of windows re-install or game re-installing.
View 6 Replies
View Related
Aug 15, 2012
I have tried every setting available on this laptop, from all set to default to trying multiple changes in all the settings. The volume is consistently low and has a very annoying reverb and echo effect, even with those settings turned off. I have only had it for a week, and I have been very pleased with everything else accept the audio. The reason for purchasing this model was for multi-media processing and so far I and becoming more disgusted daily with it. It is a Pavilion dv6 and it has the beat audio software.
View 9 Replies
View Related
Jul 26, 2014
I have a HP pavilion g6 notebook
View 1 Replies
View Related
Aug 13, 2012
I was using my notebook pc when it suddenly crashed with the BSOD popping up giving the error:
UNMOUNTABLE_BOOT_VOLUME
Technical Information: ***STOP: 0x000000ED (OxFFFFFA8005252870,0xFFFFFFFFC00000B5,Ox0000000000000000,Ox0000000000000000)
On restarting I was given two options:
1. Launch Startup Repair - Choosing option 1 gave me an error message HP Recovery window stating - Create file fail. On clicking Ok, it takes me to another screen (HP recovery manager window) stating Recovery not supported under current configuration, please enable accelearation option for intel Smart Technology and try again. When I click Ok the screen closes and the computer shuts off.
2. Start Windows Normally - Choosing Option 2 gets me back to the BSOD with the same error
Then I tapped on F8 while stating up. I was given a host of options:
1. Repair your computer - Error window (Windows Script Host) Script: X:Rita-toolStart.vbs; Line: 93; Char:14; Eror: The system cannot find the file specified; Code 80070002; Sourcenull). then it goes back to the error reported earlier for Launch Startup repair
2. Safe mode - BSOD same error
3. Safe mode with networking
4. Safe mode with command prompt
5. Enable boot logging
6. Enable low-resolution video (640x480)
7. Last known good configuration (Advanced) - BSOD same error
8. Directory Services Restore mode
9. Debugging mode
10. Disable automatic restart on system failure
11. Disable driver signature enforcement
12. Start Windows normally
I did not try any of the other options as I was not sure what it was. Then I tapped F2 while starting up and went into the HP Advanced Systems Diagnostics screen. There were a lot of options for running tests.
Every test I run ends up as failed. Failure ID: 0U6G3A-63C785-MFPX0J-60R803. It always says Hard Disk Short DST: Failed
Bottom line is any option I take it gives me one of two errors, either the BSOD UNMOUNTABLE_BOOT_VOLUME or the error that my repair utility cannot create a file.
My system information:
Model: HP Pavilion g6 2010tx Notebook PC
Processor type: Intel Core i3-2350M CPU @2.30Ghz
Current Processor Speed: 2300MHz
Memory Size: 4096 MB RAM
BIOS Date: 05/29/2013
BIOS Revision: F.25
View 7 Replies
View Related
Nov 6, 2014
Notebook: HP Pavilion dv6-6169er
Problem: I have just installed Windows 7 professional, after installing all drivers (bios, video, audio, touchpad etc - all standard drivers) there are no bar appearing when i press F9-F10 (volume bar) and F2-F3 (broghtness bar) - there were bars before for sure (volume bar with Beats icon and bar itself). Functionally it works, but no visual appearing.
Also, if you are watching a video on YouTube and pressing volume up and down on keypad (F9-F10)- the volume is changing, but the indication under video itself is freezing.
I have tried many times to reinstall audio driver but it doesnt solve the problem.
View 7 Replies
View Related
Feb 27, 2009
Vista 64bit. The touch controls for the volume, wireless on/off, and mediasmart are not working. i'm getting annoyed with contacting hp over this.
View 9 Replies
View Related
Jun 21, 2014
I have got a thinkpad x61 with win 7 pro x64. A few days ago I installed hotkeys drivers from Lenovo. On Screen Display problem: when I press volume up/down Button the volume decreases completely. To make louder or dim the volume I have to hold the buttons. All the other hotkeys functions work . why? what I have to do?
View 6 Replies
View Related
Jul 2, 2014
Volume Indicator not showing when adjusting volume with fn+f8/f9 key on ProBook 4740s 64bit Windows 7?
View 3 Replies
View Related
Nov 3, 2014
This problem started after updating my audio driver on my HP Pavilion dv6 7039tx laptop. I noticed that the volume has been muted and a message reads out no speakers or headphones have been connected. After using the windows troubleshooter the troubleshooter detects that "the hardware changes might not have been detected".
I have now already rollbacked the driver uninstalled it and reinstalled it multiple times rebooted my PC too but nothing seems to work. In the device manager it detects my IDT high definition codec devices. I strongly feel there is something wrong in the registry since this is not a hardware problem. Even in the HP Support troubleshooter it does not detect my audio devices. I dont know what to do I really dont want to restore my PC .....
View 2 Replies
View Related
Aug 31, 2014
I just got back my laptop after being reimaged Windows.
There are above the keyboard the volume and wi-fi tabs, wi-fi is working okay, if i want to turn it off it changes the colour to red. However the same not applies to the volume (it is always white), and also before the reimage whenever i put volume there was small box appearing on the screen showing how i changed the volume... Now it is still working, but i want that small box back what appeared before. How can i do that?
I installed HP MediaSmart whole package - and restarted the laptop after it, but still no success... I have a 64bit installation of Windows 7.
View 4 Replies
View Related
Sep 19, 2014
On hp pavilion dv7-1232nr the sound volume signal that appears on the screen any time the volume is adjusted is not functioning as before ! is there any point or option that is being clicked on or off to disable this signal !
View 1 Replies
View Related
Jan 19, 2015
I have an Hp Pavilion Enternainment PC (HP Pavilion dv7 Notebook PC), 64bit, Windows 7, Service Pack 1. The pc is integrated with a HP xb4 Notebook Media Docking Station and a HP 2509m flat screen monitor. Unless I have turned the volume completely off, I continually get a volume icon (showing the current volume setting) intermittently displaying in the center of the flat screen monitor. I am unable to move it to any other location on the flat screen display or to the pc monitor.
View 2 Replies
View Related
Nov 28, 2009
I recently purchased an HDX16 with Blu Ray and I just put a movie in for the first time and I can't get the volume to work. Has anyone run into this?
View 6 Replies
View Related
Feb 25, 2009
when I touch Volume, Bass, Treble during in-game sequence (For example: GTA IV, Saints Row 2), the game minimizes to the desktop and the audio(dialogue) keeps on playing. So when I go back to the game, it takes a second to catch up with the framerate but it doesn't freeze. Yay! But my initial question is that is there a way around this? So when I touch the volume in-game sequence it doesn't minimize to the desktop?
I used to adjust the volume in-game and it worked. So I don't know what's going on!
View 3 Replies
View Related
Nov 30, 2009
HP Pavilion dv6 - volume too low
Anyways I have the IDT Control Panel installed with all the drivers up to date but with the volume turned all the way up I can barely hear anything from the laptop speakers, if I plug in headphones they work fine but the speakers barely put out sound.
Model: HP DV6Z CTO
OS: Windows 7 Pro 64 bit (updated drivers from hp's site).
I tried the suggestion regarding installing realtek driver's but my laptop bsod'd and I haven't tried anything since (couldn't think of anything).
The green volume bar barely goes up when I do stuff such as watch video's online (doesen't even reach 1/4th of the way up) while the volume is turned all the way up.
View 10 Replies
View Related
Mar 29, 2009
I have a Dv7 not a dv7t so I did not know to make my own thread or post in the other thread.
ANYWAYS - My girlfriends dad got a computer very similar to mine and it looks identical besides the color. I know it is not the exact same because the index score is lower.
When he changes the volume on the touch part from the computer it shows a meter in the center of the that moves while he slides his finger across the volume.
View 7 Replies
View Related
May 22, 2010
Every time I change the volume on my notebook via keyboard shortcuts, a volume... "window" pops up and indicates how much i decrease or increase it. Problem is, that while I'm gaming or watching a movie, that indicator is always on top of any application i have opened, so it makes some games stutter, and if i accidentally click it, my game minimizes on the bar. Is there anyway to disable this feature on vista?
View 10 Replies
View Related
Feb 2, 2009
How do you make the volume slider
A. shut the heck up (no more clicking when adjusting the volume) and
B. I've heard you can get rid of the on screen visual adjustment of it, how would one do that?
I've also heard from two people that you can set areas of the touch pad to do things like right and left click (as a silent alternative to the buttons).
View 5 Replies
View Related
Jun 1, 2009
when I pop in a Blu-ray movie, I'm getting pretty anemic sound and I need to turn the volume all the way up to get it to a decent level. Even then, it's pretty weak.
However, when I'm playing a game (like WoW), the sound is big and full and I actually need to turn it down most of the time.
Why is the sound output so bad when watching BR discs? Anyone else experience this difference in volume and quality of sound? My DV7 was the same way with BR discs. Maybe there is a setting I'm missing to adjust this?
View 3 Replies
View Related
Feb 21, 2010
Why does the volume bar have to take main focus everytime I use it causing it to take me out of full screen games?
Speaking of the volume bar, turning off the touchpad makes it impossible to use any programs until the stupid picture telling you it's turned off goes away.
I have eyes and ears for a reason! I can hear the volume going up and down, and the light on the touchpad is enough to tell me it's off!
Is there anyway to keep the hotkeys but turn off the visual reminders? =.=;;
View 10 Replies
View Related
