HP/Compaq :: How Can I Flash Back My Dv4t BIOS
Nov 23, 2009I have followed the method from this forum to flash my dv4t BIOS from F31 to F55, but , now my computer can not start when i push the power button!! it is black screen!
View 3 RepliesI have followed the method from this forum to flash my dv4t BIOS from F31 to F55, but , now my computer can not start when i push the power button!! it is black screen!
View 3 RepliesWhat is the most up to date version of the BIOS for the HP DV4T?
View 4 Replies View RelatedI have a HP Pavilion dv4t-1000 CTO Entertainment Notebook PC and after updating my bios from F.22 to F.24 the computer wont boot into Vista. It was completed successfully using the winflash, but the computer restarted it just stays at a black screen, and wont go any further. (I hope bios is not corrupted.)
The computer is on but its not booting the operating system.
Is there any way I can revert to the old bios?
Also is there any key combination that can get it to load BIOS from a USB flash drive?
I have a DV9500tCTO and a DV6000tCTO. Both of them had the issue of good hard drive to SD card performance, but abhorible SD to hard drive performance. It would run one core to 100% and 75% for the other. I contacted HP today about it and they told me about the F.59 BIOS that was designed to fix the issue. My current had been F.52. So I loaded it on my 9000 and rebooted, all good, better temps, and my SD worked as it should. So they said load it on the 6000 and check results. Everything seemed to go fine, said successful, brought up reboot message box, let the timer count down as normal, it shut down. Hit power button and fricking nothing! Black screen, and leds come on. Mute button turns orange, then goes blue and stays blue. Wireless light is orange. The fan starts up fast then slows to a quiet (like minimum speed) run. I don't know what to do. "Within the next 24-48 hours" my escalated case correspondant is supposed to call. I'm a college student. I cannot afford to replace this crap. And I can't afford 300$ charge i've been seeing float around for BIOS repair by HP. My 9000 still has 1.5 years of warranty, I wish it would have happened to it. My 6000 is out of warranty. I gotta have this second laptop for school, no way around it. But I can't afford to replace it right now, I just paid 6,500$ in tuition/rent/books. I did this according to a service techs recommendation, I don't see how I should have to pay for the ed update.
View 6 Replies View RelatedQuote:
Originally Posted by smoses799
I went to hp's website and downloaded the new driver. The installation went to the point where it erased the old bios and closed. So, I ran it adian and it said that I still ha the old bios. I tried to run it agian and it claws at the same point. I continued to use the computer. After about a hour I decided to restart the computer. Now the lights on the computer comes on and I can hear the HD start up but the screen stays black and it seems to not post or start windows. All I see is a black screen and cannot get it to respond. Just a warning for other dv8t owners thinking about updating. Posting this from my iPhone
dv2000 second mini-pciE connector (next to hdd/bios battery/flash)
Has anyone tried to mod the MINI2 solder point (next to hdd/bios battery/flash)
like the ones done for the Asus EEE pc?
It says "MINI2"
Had a venturous youngster tamper with my laptop yesterday, and that person managed to set a bios password. The machine will boot with out it, but it is requesting an administrator password in order to access the BIOS settings. Heh, I wouldn't have even noticed if I hadn't decided to load Ubuntu 10.04 for the first time.... Needed access to the boot order.
So, does anyone happen to know the back door password or any other option for me to get this fixed? It would be easy if I could pull the mobo ID from the OS, but HP thought ahead on this and I fear that they may have done the same thing with the password issue.
I downloaded the latest 3813 bios from acer europe website. I am tying to run the winflash utility but I get the following error.
Cant load driver flashnt.sys
and so on, take a look at the screenshot
I have tried running as administrator already. Same error.
I was going to try running in vista compability mode or installing xp virtual machine, but I wanted to run it by you guys first.
Updating BIOS is not something to be taken lightly. It can birck your machine easily.
SO whats going on here?
Isn't there a way to update BIOS from the bios?
My asus desktop motherboard allows you to use asus ez flash utility from within the bios and flash from usb or your hdd. I wish this was the case here but I can see nothing of the sort.
I really didnt want to flash from within windows in the first place anyway, but I saw no other way. I'm supirsed there is no readme files or anything that came along with the file. And I cant see documentation on the acer website either. Just a link to the bios zipped with no support
I am currently runing bios 3805. The one that came with my laptop. I have had it for 2 years now and Im the process of trying to upgrade some things on it.
how to flash my acer 5920g's bios? I've downloaded the bios files from acer.com, but after i unzipped all the files i duno what to do next.
View 7 Replies View RelatedI recently bought an Acer 4810T943G (su9400) with Vista.
As seems to be common with Acer notebooks, it had a freezing problem, so I decided to flash the BIOS.
The version it shipped with was v1.10. I went to the Acer website and downloaded v1.31, extracted it, and executed the program. The InsydeFlash software told me 'This BIOS is not for your notebook'.
I tried the other BIOS recommended by Acer - v1.30, and even the special editions 2.30 and 2.31, but all came up with the same message.
I then located v1.28 from somewhere else, and this flashed successfully, but I still get freezes, so I'd like to try 1.30 or 1.31.
One thing I have noticed is that on the InsydeFlash software, the BIOS ID of v1.28 is described as JM41, whereas those of v.130 and v1.31 are described as AA, and A_A forms part of the file name on the v1.31 download.
Sony VGN-SR series bios update fail. now the computer is dead. battery light blinks. powers on, thats it. I know easiest way it to swap MB but warranty just over. damn viao updates!
View 5 Replies View RelatedI would like to how to flush bios on Acer v3-771
View 3 Replies View RelatedI have a Dell XPS M1730 with a BIOS revision of A03--the latest revision available on the Dell Drivers & Downloads page is A10.
My dilemma is that I am not sure if it is safe to skip the revisions A06 and A09 and just go straight for revision A10.
Also, is revision A10 any better than A09 or A06? Please, I really need somebody's advice on this matter.
Reasons for this BIOS update:
* Upgrading to two 250GB Momentus hard drives and run them under RAID 0.
* Planning on dual-booting Windows Vista 32-bit and Vista 64-bit (need help on this one as well, but let's just focus on the current matter) .....
Second time this has happened. I've downloaded the BIOS update from Acer's website.
Closed all programs, disabled the antivirus and went to flash it. Right after clicking start I get a Verify Error and the sytem freezes and is a dead unit. First time this happened they tried to tell me it was something like $150 to fix even though I did everything right. Now I went to do it again, same thing. Now Acer is telling me it will cost $450 to fix it. It's only 3 months old. They are also saying they are not responsible for anything downloaded from their web site.
So, couple questions. Has anyone successfully flashed their BIOS to 1.34? Does anyone know where you can buy motherboards cheap?
i jsut DL'd the CL50134_Winflash.zip from acers website to try and fix some issues i've found this can fix, i extracted it, shutdown all apps i could, hit start or run and up popped an error message.. system froze... sat there for about 30+ min (i was freakin the whole time) and nothing didn't move.. didn't budge... my screen saver popped on but before that it hadn't moved an inch... can't toggle capslock or numlock.. can't even get rid of the screen saver now.... i shut the system down (the bad way) and now nothing.. can't get it to turn on at all....
View 5 Replies View RelatedI have a HP dv6500 running Windows 7 for which I want to upgrade the pci-e mini wifi card to one of the intel cards available on Newegg, or perhaps a 4G card. However, I have read that the stock HP BIOS has a whitelist for wifi cards, and only select cards will work.
I have located a modified F5A bios that I am willing to try: [URL] .....
I have also heard that flashing a BIOS from Windows 7 will damage it, and the recommended solution is to reinstall Windows Vista. Is there some way around this? Could I perhaps use a PE CD?
Do I put isflash.bin and InsydeFlash.exe on a bootable USB drive and boot from it?
View 5 Replies View Relatedhow to flash to the latest bios on this (3.13). It says in the readme to flash from DOS only. No dos here.
View 6 Replies View RelatedI have an Vostro 1450, already at the latest available BIOS (A08). I have a problem which might be fixed by re-flashing the BIOS. However the BIOS upgrade utility (V1450A08.EXE) detects that I'm already at the latest version and sensibly refuses to "update". Is there a way I can force the upgrade utility to re-flash the BIOS?
View 3 Replies View RelatedAfter killing my old battery, my Latitude E6500 is refusing to detect the new battery I bought for it. It will run off the battery if I disconnect the AC, but will not charge, I have been using a co-worker's E6500 to recharge it.
I have been instructed to run the E6500 Bios flash, however since the computer does not detect the battery, it will not allow me to proceed with the flash. /forceit does not work. Are there any other command line variables I can use to make the bios upgrade perform without a battery check?
You can flash the bios with the version 1.11 (1.09 unavailable on the Acer website).
Flash only the bios under DOS.
This one currently has A07, and I know it needs to flash A09 before bumping up to the current A13, but A09 stops right after launch (".....unexpectedly quit..."). Logged in with Admin rights, not seeing any reason for BIOS failure. Another download of the A09 was tried as well.
View 6 Replies View RelatedI recently received my Hp dv4t. Its cool but has below mentioned problems.
1) Wireless connectivity disappears after 1 min. I have to manually restart network connection.
2) CPU fan always remains on. HP has by default set it to "always on" in BIOS. I know they had some issues earlier with heating so as work around they introduced this Hack. Is same issue with this laptop too?
3) HDD is getting very hot. Much hotter compared to my dell studio laptop. Is this normal or shall I ask for some specific manufacturer harddisk in replacement?
4) display is not fitting in screen. Display leaves 4cm space on bottom and right edge. Is there any way to manually adjust display like the one monitor or other laptop manufacturers provide? I have asked for replacement of whole laptop at present
I want to flash my card with an older GTX bios I used to have. But some months ago I installed the unlocked roms...
I still have that rom (gsx) and now I want to burn it on a cd-rom and flash my card with the juan software.
So first I burned Juan's software on a cr-rw (don't close the disk). Afterwards I added my old rom. When I want to flash it and I typ:
nvflash -4 -5 -6 GTX1.rom it says that it can't find the file...
I have old version A05 on my E6410 Bios. I tried to upgrade to A06, then I´d like to upgrade to A07, A09, and then to A13, because i need to have the A09 installed before install A13.I`ve downloaded all the versions, but the problem is that the Dell BIOS Flash window does not start !!!
View 9 Replies View RelatedI just bought removable graphic card gt750m5. And I downloaded the bios from this address [URL] ....
And I clicked on NVflash.bat
And it said "NO NVIDIA display adapters found" what should i do?
I attempted to update my bios for my Acer Aspire 5745 notebook and chose the wrong file. The computer is giving me a black screen now. When I push the start button the lights come on the fan blows and thats all. I found a few sits on line giving me the procedure to flash an aspire one system. Here is the steps I took to do so to no avail.
1. When to the acer site and put the SNID number to my laptop to pull up my suggested downloads for my system.
2. I downloaded the file to my working computer.
3. I extracted the file and opened the file that said DOS.
4. I renamed the file zg5ia32.fd
5. checked my flash drive to make sure it is set to ( FAT ).
6. Transferred the file to the flash drive.
7. Pluged in the flash drive to my dead laptop while it was pluged into a powersorce.
8. Held down the FN and ESC buttons while pushing the power buttons.
9. Released the FN and ESC buttons when I noticed the power light blinking and the flash drive light up.
10. Waited for over 15 min. but had no success.
I also opened up the backside to the laptop and removed the little battery that was plugged it with a small white connector assuming it was the cmos battery but still nothing happened.
I'm looking for a Lenovo B575 bios update/flash utility since my BIOS has gone bad. I cannot change/save changes and cannot restore to defaults.
I cannot find bios updtae on lenovo site (not on drivers for B575 and not under the drivers matrix). I've even tried via "Phoenix" as it's their Bios, no good. And even via a third side component (biosagent plus) that should have Phoenix bios, still no good.
I'm having an issue displaying a picture properly on my Vizio 720p 26" LCD via HDMI. No matter what resolution, the desktop extends beyond the border of the screen as my mouse will move past it into the area I can't see, and the screen doesn't scroll like it normally would in windows when the resolution is set too high. The NVIDIA control panel can't even get the 720p option to display properly.
View 6 Replies View RelatedTemperature near hard drive is insanely HIGH. how to cool HDD. Is this problem with all HP laptops?
View 10 Replies View Related