HP/Compaq :: Intel 5100 Vs The Broadcom Stock On A Dv5t
Sep 8, 2009
i have a dv5t that comes with a stock broadcom wireless card. i have an opportunity to acquire an Intel WiFi Link 5100 card , will i see a noticeable improvement in my wireless performance?
I have a dv4z and wanted to upgrade its wifi capabilities. Right now it has a Broadcom 4321, and because of the HP whitelist, I can only change to a Intel Wifi link 5100. is the Intel 5100 better or worse than the Broadcom?
The DV5T seemed to be working pretty well for me and no real wireless issues.
What has happened is that since I upgraded to Windows 7 and the new drivers, I get some hitching, rubberbanding in games, slow speeds at times, etc.
Now I know Windows 7 is pretty rock solid and the new drivers came from the HP site.
But when I started googling, seems TONS of people have issues with the 5100 card and maybe I was just lucky before.
At first I noticed my card speed goes from ~50 MBPS to max of 130 MBPS. After reading, it seems even though my router supports 40ghz dual channel yadda yadda, the card only goes to 2.4 so it can't really run at 40ghz is my understanding and that 130 MBPS is pretty much the cap.
That said, it was that way before the Win 7 upgrade so that shouldn't change anything.
One thing I noticed is that in my device driver before the upgrade, it was a normal 5100 but now with the drivers, I see a 5100 AGN.
I can't find how the AGN and non-AGN versions differ?
Could it be I have AGN drivers for a non-AGN card?
Lastly, is this wireless card removable and upgradable or can I use the slot (empty) that I have for another card and disable the wireless 5100 through BIOS?
I just got a new HDX16. Been having issues with the intel 5100 agn. I've updated drivers to no effect. It would stay connected for awhile, but loose all connection at times. Its starting to be a pain. It can't even pickup my neighbors' connects and I have 10 in my area which my Toshiba picks up. Its paired to the Dlink DIR-855.
I've been using my Sony Vaio Z-540 without a problem for about a YEAR until recently (about a month?), my wifi has been acting up.
My wireless card is Intel 5100 AGN
The problems are: 1. Sometimes, I do not get wireless from the startup . my wireless isn't even in the Device Manager...
2. When I do get wireless (Device manager confirmed), wifi connection disappears with even the SLIGHTEST MOVEMENT!
3. When I do lose the wireless driver (no more on the device manager), I put it to sleep, wait 5 seconds, wake up, and my vaio detects it. [but this isn't the case for ALL the time, sometimes I have to restart the vaio]
I thought it was a loose wire or loose card, so I opened it. The wireless card is bolted down with 2 screws. So i put everything back and it still has the SAME issue.
Also, I've updated the Intel 5100 Driver to the latest (When I finally got my Wireless driver seen on the device manager) but still the SAME problem, so I'm back on my OLD driver. still same problem, of course.
when I do have my wifi, my wifi just disappears with the SLIGHTEST MOVEMENT on my laptop. It has to be still...
I have managed to finally resolve my problems with my Windows 7 installation by redoing the upgrade, everything now seems great and all the original drivers/software (FN buttons etc) are working great. So far, Windows 7 looks great!
One problem I'm noticing and I've also found links on Google of other users complaining about the same is that the Intel 5100 AGN wireless seems to drop quite often. This never happened under Vista.
I use IRC quite a lot, and it's so frustrating with my Internet constantly dropping. Other laptops connected to the same AP (NETGEAR WNR2000) do not encounter this. The drops are extremely brief.
Those of you who have an Intel 5100 Wireless card and the M4400, could someone tell me if you have 3 antenna connectors, even though the 5100 has just 1 antenna?
I recently installed Windows 7 Home Premium 64 Bit edition on my Vaio FW490 (upgraded from Vista 64). I received the free upgrade disks from Sony. When I checked my device manager I noticed that the driver version for the WiFi Link 5100 is 11.4.3.9 dated 5/28/09. On the Sony Site, they list the version for Windows 7 as 12.4.1.11 dated 10/8/2009, and when I checked on the Intel site, they are recommending driver version 13.0.0.107 dated 10/21/09.
I'm getting myself an Intel WiFi Link 5100 to replace the current Dell 1510N card in my Studio 1535. Is the Intel WiFi Link 5100 fully supported by my laptop?
Are the number of wires same for both cards? Any specific steps that I need to do when replacing the card? This is my first time doing this so I'm a bit nervous.
I'm really trying to like my new Acer 1410. Everything was working great until I tried to connect thru the wifi. Turned out the connection was really weak. This is in my house where all my other laptops have had no problem connecting.
So I try for a couple of hours trying every setting possible on my router and on my laptop settings. Finally, I open up the bottom of my laptop and find out the black wire that goes to the Intel Wireless card isn't even connected! In fact the metal connector itself is missing entirely
So me not knowing much about electronics, I cut off a 2 inch wire (with connector) from my old laptop's wireless card and taped it to the new laptop's open black wire. Plug it in and now the signal is better, but it still sucks. Any advice anyone? I really would rather fix it myself if I can. Would it work better if I solder the two wires together? Or is the Intel 5100 a POS and nothing is going to help it?
i have just purchased a new acer aspire 8730g-6353 and for some reason i cannot connect to the internet wirelessly. i can see the networks available and attempt to connect, but i'm never given the chance to input the WEP key to connect. it gives me an error telling me my troubleshooting options (which just alludes to it being a problem with signal or some garbage like that, but there is 100% signal strength at any given time).
Pavilion dv5t-2100 CTO Windows 7 64bit. Apparently fix requires downloading correct software/driver for intel chipset. Problem is how to identify the chipset. Intel does not provide utility to ID the chipset for W7 64 bit! Catch 22? What do I do?
as of 2 hours ago my high speed has been stuck at 1 Mbps, much slower then its usual 65+ that I've had over the last 6 days since I got my laptop.
I'm thinking I may have received a faulty wireless card, since when I checked my wired desktop downstairs it's still at it's usual 100Mbps, and my sisters Inspiron 1420 has its normal high speed.
Now when I restart my wireless adapter (Intel 5100) the speed fluctuates between 4-38 Mbps for about a minute before dropping- and staying at 1 Mbps once again.
I checked if there are any computers stealing my wireless connection just in case, and as I thought no one is .....
I have a Compaq presario V5000 series with windows xp about 4 years old. It has been running fine on wireless for years until a few days ago. I was getting a code 10 but now it doesnt even appear in the device manager anymore. Also, I still get resource conflict screen at startup. If I hit F1 everything starts up as normally but no broadccom!
Heres what I did so far.
Destructive recovery reinstalled windows installed updated drivers for broadcom and bios. defraged changed wireless card
I have a HP dv6-1133ea (in my sig). It has the broadcom wireless card. It is running windows 7 64 bit.
Just recently the wireless has started acting up. It can see my home network fine but just won't connect properly saying "no network connectivity" etc. I know that the network is fine as my partner's vaio (and incidentally my old Toshiba A30 that I am using to write this post) can connect fine.
I have tried re-installing the vista 64 driver from HP's website but that makes no difference. Turning the wireless on and off or restarting also doesn't change things. I have also tried re-adding the network key but that did nothing too.
Has anyone else had this problem or have any ideas what to do?
I just received the HP mini 110 with the broadcom hd crystal chip. I'm finding this purchase mostly useless as I can't easily find HD material that will run using it inside the arcsoft software. Adobe 11 I hear will sometime in 2010 but now I can't find much except some third rate movie sites.
I just got a new laptop. But there seems to be a problem with the Broadcom Wireless Driver. When I install the driver it always stops at the middle and says Error"PBR_REL_5_10 827" Do you think that the Wifi(device) is broken? I just installed Vista.
what the performance difference is between the Intel Core i7-620M and the . Intel Core i7-820QM. I always thought the quad core 820QM was faster, but on the hp website the dual core 620M is more expensive.
Is the 620M faster? And is it faster for specific things only?
I'm swapping out my 7900 GTX for a new 7950 GTX. Do I need to download anything specila to overclock it? Or will the stock Dell or G-Force drivers allow me to do so through the Nvidia control panel?
I am getting quite scared about my hp dv5t its getting really hot. The cpu is always at 50-mostly around 65 degrees doing normal work. I keep it on a targus cooler sometimes, but when im on campus I can only use the bare desk. I have undervolted the computer and the gpu is fine always maxing out at around 60 degrees and the harddrive is always at like 40. How do I keep this cpu from getting so high? It makes the computer really hot. Anything like undervolting, or anything free would be a + point.
Any driver I install other than the Dell driver for my 7950GTX gives me a blue screen of death. I use the Driver Cleaner/CCleaner approach. I've even reformatted to see if it was some operating system anomaly. I know there's a DLL you can delete to make it work, but I'm not willing to give up the control panel.
i did some tests before and after applying artic silver to both my cpu and my gpu, here are the results:
Stock cooling temps :
GPU max: 81C CPU0 max: 75C CPU1 max: 76C
( the photo was actually incorrect, as i found it was from when i was testing overclocking setups )
then i opened up my lappy and applied some AS5: CIMG0676.JPG CIMG0677.JPG CIMG0679.JPG
and finally my temps are with the new AS5: temps artic cooling.jpg
( wut? them CPUs are the only ones feelin it :P )
now the air that goes out of the vent is really hot, this did not happen with the stock dell cooling paste.
i just applied it, so should take 200 hours to take full effect
*Update*
After about 190 or 200 hours of use, my temps are really the same... i dont know if it could be winter, because in winter my house gets a bit warmer.. i will, however, try to get to the same room temperatures i had back then and do the stress test
*Update (again )*
After removing and re-applying the AS5, i found out what i was doing wrong:
1- i did not put enough AS5, it needed a bit more for the heat assembly to have perfect contact
2- i did not put enough pressure on the GPUs screws because i was afraid of breaking it
After doing this i find that on the first stress test i get 3 or 4 C lower temps ( from 82 to 79 C ) il do some more stress tests and update the temps.
i bought an hp dv5t laptop about 7 months ago.my laptop battery has been working fine since then.few days back it has has started to give me problems.sometimes it refuses to charge when ac power is connected e.g it stays on lets say 20% even though its been on AC for a long time.well sometimes it charges normally without any problems.also i have noticed that it charging time has increased a lot from about 25 minutes to 40 min. is there anyting wrong with the battery or is my ac adapter faulty?how can i improve my battery condition?