HP/Compaq :: Tx2zRM Clock Not Recognizing Proc
Aug 18, 2009
I just got a new tx2z yesterday, opened it up, took forever cuz of bloatware. I downloaded a copy of windows 7 from MSDNAA (Thank you college) and installed it and found drivers for the pen and everything.
I knew from the reviews that the tablet runs HOT, and was going to use RMClock since I heard people using it to undervolt their processor. However, RMClock 2.35 does not recognize my processor (AMD Turion Ultra ZM-83 2.3ghz)
I did the vista 64-bit RMClock fix in order to run the application, but since it doesn't recognize the processor, there's nothing I can do to undervolt it.
Also, does anyone know of any fan control software that I can install that works? Something like I8K for dell that works on the tx2z? (64 bit windows 7 that is)
View 7 Replies
ADVERTISEMENT
Mar 15, 2010
Can the motherboard not support up to 8GB of RAM?
View 10 Replies
View Related
Nov 4, 2008
I have a travelmate 2301 with a 1.5gig celeron in it, will the processor from the compaq evo N800c which is a 2.0g p4m fit this board? the motherboard died in the compaq so im going to scavange the parts from it...it has 2 gigs of ram, a 120g 7200 rpm seagate drive as well. I hope the processor can fit..
View 7 Replies
View Related
Apr 24, 2009
I have a brand new xps16, running wonderfully.
I've modded the desktop Catalyst 9.4 drivers, games perform well, better than the provided Dell Catalyst.
What I would like to do however, is be able to alter the GPU clocks. Not by much, just a little.
I've tried AMD GPU clock tool; but this does not let me fix new clock values for the ATI 3670. I enter a new value, and they revert to the default right away
View 10 Replies
View Related
Jan 28, 2009
I have a DV6000T with Windows MCE bought in Jan 07. It came with 2 GB of RAM, and I finally decided to upgrade to 4 (although I know it can only read 3.12). I bought 2 x 2GB Kingston DDR 2 PC2-5300 667 MHz RAM and installed both sticks into my DV. I turned on the thing expecting to see 3.12 or something of the sort in the system area, but it still only shows 2GB.
View 9 Replies
View Related
Jan 18, 2010
i recently had a post here about my laptop being thrown up on, and looking for a new system board. Well I was able to buy the whole laptop base, with system board and power button so all i had to do was install the screen cd drive, hard drive, and wireless. I did all of this and put it back together, but when i try to start the computer it gives me a no hard drive installed error. What can I do? I ran the memory test and its 100% working, and in the start up test or whatever, the only thing with a problem is the hard drive not showing up.
View 9 Replies
View Related
Oct 26, 2009
how to get his information for my computer?
View 3 Replies
View Related
Nov 13, 2009
i have ati hd4650 1gb gddr3 in this hp. should be 550 gpu clock and 667 memory clock. when i go to gpu-z graphic card tab it shows that values but when i go to the sensor tab it shows gpu core clock 220mhz and memory clock core 250 mhz.. it is on hp recommended power style. and interesting thing happens when i unplug it. memory clock core jumps to 396 mhz.. why is this so?
i checked power options and when its plugged in graphic should work for best performance.
View 6 Replies
View Related
May 11, 2009
I have been reading the threads related to HP notebooks with defective nVidia GPUs and just out of curiosity, I checked the 8400M GS GPU in my roommate's HP dv2700 notebook, which normally runs @ 80 - 90 deg C, using GPU-z software. The sensor data matched the default core / memory clock for 8400M GS, when under stress. But I got confused when I saw that the shader tab is disabled .
I do not know if somebody else has already come across this situation. I searched here and could not find a similar reported problem, hence this thread. Am I missing something here or is there someone out there having the same problem. Can it be something related to an older ForceWare version (156.65)?
View 10 Replies
View Related
Apr 11, 2010
I know there are a couple of 3x00 Vostro threads, but some are very long and the other did not seem to have an answer for this question.
First, I am very interested in this new Vostro. It seems a good configuration and design for the price. I especially love the 17" screen at < 6 lbs. Seems too good to be true.
Does anyone have experience with this machine? Is the weight including the battery and everything? It is a pound lighter than the 16" Sony F I am using. I like the F, but this Vostro seems a little more in line for me (PhD, heavy stats and datasets). My wife woul appropriate the Sony if I were to pull the trigger on the Dell.
Also, the i5-520m to i7-???qm (dual to quad, differing clocks and all). I am thinking the i5 may be the way to go. Most of my stuff is not designed for 4-cores, 8 threads, etc.
View 10 Replies
View Related
Jul 12, 2009
i bought my wife a netbook, as she specifically requested, thing is, on 3cell 3hrs are great, but it has begun to "tear" a lot in WINXP.....
background services...etc have been seen to
so i check out CPUID and lavalys.....both showing Proc working along at 800mhz....i have tried to change power profile in XP ..... and tried making a new one, but there is no way to reduce that tearing effect...... it feels a bit sluggish to me, i am going to add a 2G module (accepts Elipda 2G module from my HP DV5T) so some RAM along those lines is wha i am aiming for......
how to stop/ allow the laptop to clock on OS load....cuz the 800mhz on the netbook is unacceptable.
View 10 Replies
View Related
Nov 22, 2009
The Acer Timeline 3810tz is advertised to get 8+ hours of battery life. Those who have tested get about that amount while browsing the web and doing simple task, and this model contains a single core processor. I read somewhere that the Acer 3810 model with a dual core processor SU4100 get half that battery life and only goes about 4 hours.
View 5 Replies
View Related
Oct 20, 2008
ive got a slight problem with my laptop. 2-3 months ago i added an addition gig of ram to my acer aspire 3050 for a total of 1.5gbs. it was the correct type of ram(i made sure it was the same as what was already in there). for some reason the computer will recognize that the ram has been placed in the slot but it does use it at all. when i am running programs will it will still draw what's needed from the hard drive even though peak usage rarely surpassed 700mb of ram. was there something i was supposed to activate/adjust after installing the ram?
and another disconcerting thing is that since i installed the ram the fan is on fullblast 100% of the time and the machine heats up almost to the point of overheating really fast even when doing basic things like surfing the web
View 10 Replies
View Related
Dec 13, 2009
I have been searching for days for Blu-ray help. Apparently after everything I've looked at, ACER really screwed up their ads of blu-ray on computer. Because, even though my notebook should play blu-rays....it wont even recognize the disc. It tells me there is nothing there. I am getting really fustrated that there are no drivers or any other useful help out there.
View 6 Replies
View Related
Sep 3, 2009
I received my E6400. In short, I like it. It came with 1gb of Ram. So I ordered 4gb of Crucial (2x2gb) ddr2 6400 to put in it.
Well. It's only recognizing one stick of it. The Ram itself is not bad. I've verified this by placing each stick in individually and I get no errors. Would there be any reason the computer would not be recognizing that second stick that isn't hardware?
The bios says the second slot is empty. Which either means that for some reason the software isn't recognizing the ram or the second slot itself is bad?
Ah...specs.
Started out with XP. It did the same thing. only 1 stick was recognized.
I've installed Vista Home Premium 64-bit.
T9800
Bluetooth upgrade was user installed.
What other system info do you need?
View 9 Replies
View Related
Nov 3, 2014
My Inspiron 11 (3000 Series) is not recogning its own battery. its not even turning on unless I have it plugged in (I checked it on two separate cords). I've checked it in the utility boot, and the battery is registered as unrecognized.
View 2 Replies
View Related
Dec 6, 2014
Yesterday, my laptop stopped recognizing the ac adapter. It's been functioning fine until now. Now, it will not charge the battery and I can only use my computer with the cord. I purchased in late 2011 or early 2012.
Have read other dell model posts that suggest replacing the adapter, battery, updating BIOS, etc. Haven't seen anything related to my model.
View 1 Replies
View Related
Nov 5, 2009
I've got an odd problem - my iPhone neither charges nor is recognised by USB2 on my 3810T. Tried same lead and phone on desktop and other PCs no problem. I'm running Windows 7 home premium 64 bit on both laptop and main PC.
My normal iPod classic connects and charges fine via the 3810T as do other peripherals like the external DVD-RW and memory sticks. Sony Ericsson mobile phone connects and charges too.
Can anyone explain this or has anyone either had the same problem or have connected successfully with an iPhone?
View 10 Replies
View Related
Jan 29, 2008
A friend brought me a Aspire 3023WLMi few weeks ago. Problem: Unable to boot. BIOS didn't recognize harddrive. I switched it to another laptop which reported SMART-error. I replaced it with another harddrive. Now BIOS still won't recognize harddrive or DVD-drive (can't remember if it recognized DVD earlier with original harddrive). I can't open DVD-drive, so obviously it's not getting any power. if this a sign of broken MB, or just loose cabling? Or something else? If it's loose cabling, how to check it?
View 4 Replies
View Related
May 25, 2010
My fan recently died in my macbook (early 2008, probably a penryn right?) and i decided to replace it myself.
I ordered a fan that was stated it would fit all macbook's except the macbook with unibody.
It was shipped from the US and i live in Sweden so it took a while. I recieved it today and lo and behold, it does not fit.
I've opened up a dispute with the seller but i need to fix my laptop asap so i need to get another fan somewhere.
I will probably be buying from ebay since it's cheaper, but this time i want to be certain i get the right part.
I wanted to ask if i can identify what fan i want and don't just go by the description of the item (since that fooled me once)?............
View 4 Replies
View Related
Oct 2, 2014
my brand new lenovo y50 touch. Straight out of the box, everything works beautifully except one major thing: the touch screen doesn't work. I know it is the touch version and settings even calls it "lenovo y50-70 touch" but below that it reads "No pen or touch input available for this display" ...what?? there are also no drivers on lenovo's support page that say anything about touch.
View 4 Replies
View Related
Jul 19, 2014
I have the HP envy and I have been using simple pass fine for ages but then I tried to rescan my fingers to fix it because it seemed to be having a lot of trouble recognising me so when I went through I deleted the fingers and tried to input them again but whenever I scan one of my fingers it says that the finger is already enrolled HOWEVER when i scan my finger outside of the program it asks me to setup HP simple pass but when you click configure it doesnt open the program
I have tried repairing the program with the control panel
So How can I reset the program to a fresh install? Is there a place where I can download a replacement copy?
View 1 Replies
View Related
Jun 26, 2012
Every time I turn on my Dell Inspiron N5010 laptop, I get the following message:
"The AC adapter wattage and type cannot be determined. The battery may not charge. The system will adjust the performance to match the power available. Please connect a Dell 65W AC adapter or greater for the best system performance."
I don't know why I am getting this message since:
- I am using the 65W Dell AC adapter that came with the laptop- The adapter is charging the battery properly- The green light on the adapter stays on all the time when in use- The port connection is fine
So, other than this annoying error message, everything seems to be working fine. Should I just ignore it ? If not, what else do you recommend I do ?
View 15 Replies
View Related
Jan 5, 2015
I updated my computer to windows 8.1, and now it doesnt recognize the Nvidia 755M graphics card. I even went to this URL... website and tried to run the .bat file, but it showed up with an error stating "Error: Invalid Display Adapter Index specified".
View 9 Replies
View Related
Nov 30, 2014
Inspiron N7110 . Wouldn't boot in to regular windows. I booted in to safe mode and tried to run chkdsk in system mechanic. it only got to about 20% and hung up. Now it won't boot at all. It isn't recognizing the hard drive. Is there a way to have the bios look for the hard drive? Running win7 64bit
View 3 Replies
View Related
Mar 2, 2013
I own a Dell Inspiron N5010. I am having a problem with the mouse, both the touchpad, and when I plug an external mouse in (although the problem seems to occur with somewhat less frequency when I am using the external mouse). The computer is having trouble recognizing mouse clicks. Sometimes it recognizes them properly, sometimes it responds to left clicks as if they were right clicks, and sometimes it does not respond to them at all. The problem seems to be worse when I am using a web browser, but it occurs consistently.
View 1 Replies
View Related
Oct 27, 2014
I put a new Windows 8 on my pc due too my old HDD dying --' and my recovery partition was corrupted so i had to clone the c:/ drive of a friend of mine with a similar laptop on my new sshd.
Until now everything was working fine some double drivers but they posed no problems but i have 1 problem with my 1 usb 3.0 port, it won't recognise anything, when i put in my external hdd it fires up so i know the port is giving power but it doens't recognise the drive, same goes for my usb wireless mouse and usb drive.
I know its not the drives or mouse themselves because when i put them in one of my usb 2.0 ports they function without problem.
I have already tried uninstalling the drivers, restarting the computer, took out the battery for several minutes and so on.
I also remarked that in the devices and printers there is a device called unknown USB device (port reset failed)...
View 3 Replies
View Related
Dec 12, 2014
I've a new P276M laptop running Windows 8.1. I can't get it read USB flash storage devices.
The USB ports seem to be working - wireless mouse OK. Also it works fine with an external Seagate hard drive.
I've tried a number of different flash keys - encrypted and non-encrypted. The system 'sees' the device but all I can get in Device Manager is an icon with yellow exclamation mark.
View 8 Replies
View Related
Oct 21, 2014
I have a Acer Aspire V5-572G running Windows 8.1 and have found that the microphone jack won't recognise any external mic that is placed into it. It won't detect on the sound option despite the fact all the drivers are updated.
View 1 Replies
View Related
Feb 24, 2013
I have a Dell Latitude E6820 and have just connected a new Dell E-Port Plus II Docking station. Plugged in to the docking station are two monitors, one plugged into DVI Connector 1 and the other plugged into DVI Connector 2. The laptop is running Windows 7 64 bit.
Try as I might, I can not get the system to recognise the second monitor. I have tried the following to get this to work.
- Enabled Optimus (I think that is what it was called in the BIOS) - When I enabled this, neither of the monitors would work via the docking station
- Disabled Optimus - One monitor works
- Attempted to detect the other monitor via Control Panel > Display > Adjust Resolution (monitor not detected)
- Swapped monitors and cables in case it was a cable or monitor issue. All Cables and Monitors have been verified as working as expected.
- Attempted to connect one monitor via VGA cable. Only one monitor was detected
View 2 Replies
View Related
