Lenovo Y50 P/Y/Z Series :: Not Recognizing Touch Screen?
Oct 2, 2014
my brand new lenovo y50 touch. Straight out of the box, everything works beautifully except one major thing: the touch screen doesn't work. I know it is the touch version and settings even calls it "lenovo y50-70 touch" but below that it reads "No pen or touch input available for this display" ...what?? there are also no drivers on lenovo's support page that say anything about touch.
View 4 Replies
ADVERTISEMENT
Aug 9, 2014
I see a message that says 'No Pen or Touch Imput available but the Elan Pointing Device shows up in my task bar. I tried removing the HId components but it did not work
I am running Windows 8.1...
View 1 Replies
View Related
Jul 11, 2014
Some days ago, i bought thinkpad x40 and upgrade OS to win 8. But, touch screen isn't working.
View 8 Replies
View Related
Apr 13, 2013
I used my brightness down button once and now it won't go back up. I can't adjust the settings at all, despite the graphic on the screen showing me the meter going up and down. I've checked all drivers, tried uninstalling and reinstalling lenovo energy management, and I've still got nothing. I've stopped short of a factory reset because that's super annoying having set everything up and then a couple weeks after purchase have to do it again.
View 9 Replies
View Related
Apr 8, 2014
It was working fine a few minutes ago, i closed the laptop for a few moment, but when i came back the screen was black at first. so i did a hard shutdown cause i though the computer crashed or something. but when i turned it back on, it was suddenly white. if i tilt it a bit, it sometimes goes black. I don't know what to do, i used my friends monitor and it worked so it not the computer...
View 1 Replies
View Related
May 28, 2014
Windows doesn't recognize that my U530 Touch Laptop has a touch screen. Worked okay for the first couple of months. I've tried looking for hardware updates and restarting. Computer is only a few months old, so this stinks.
View 9 Replies
View Related
Jun 1, 2014
My laptop's touch screen function stopped working just a while ago. When I shut down my laptop, tere's this windows update that lasted for more or less an hour. After that, the touch screen just stopped working. Note that there hasn't been any program installation prior to the antivirus uninstallation - all programs and files contained in the laptop is as it was the moment I bought it. *Laptop's running Windows 8 Single Language
View 9 Replies
View Related
Nov 19, 2014
I have received 3 of the above model ultrabooks, Windows 8 installed but the touch screen will not work at all. This needs to function.
Does this model support touch screen and if so, how is it enabled. OS fully patched. Pen and Touch seems to be enabled but no response to tests.
View 1 Replies
View Related
May 3, 2013
I just got my new carbon touch thinkpad today, and I couldn't be happier, until I closed the lid and reopened it a couple of minutes later. The screen froze for a while and then I got a BSOD with the notice CRITICAL_PROCESS_DIED. I hoped it would be just some coincidence, and updating my drivers and installing windows updates would solve it. So I did, and closed the lid again. After reopening it, I got the same error. So I figured I could just as well restore to my factory settings. Without luck. After updating everything for a second time, still no luck. I check the disk and did a memory check, but everything seems fine. The lenovo Solution center isn't reporting any issues either. I looked into the minidump created by the blue screen, and it seemed the process failing is called csrss.exe.
View 9 Replies
View Related
Oct 29, 2014
I'm experiencing a problem with my G500s Touch, i am not touching the screen but it makes a lot of random inputs and appears contextual menu (like right click). It's really annoying, one of these days i'm going to throw this laptop through my apartment's window.
I already opened device manager and deleted all HID interfaces and reinstalled. Reinstalled Elan Drivers (i think maybe it is the problem, elan driver), i used windows restore 3 times and i still have the problem.
A Quick solution for this: Ctrl + Alt + Del, then Escape. And you will not have this problem in the next 1, 3, 5 or 10 minutes.
View 2 Replies
View Related
Jan 5, 2015
I updated my computer to windows 8.1, and now it doesnt recognize the Nvidia 755M graphics card. I even went to this URL... website and tried to run the .bat file, but it showed up with an error stating "Error: Invalid Display Adapter Index specified".
View 9 Replies
View Related
Oct 17, 2013
How easy is it to increase the RAM in a U330 touch (from the 4Gb supplied)? Is there a plate on the underside which can be unscrewed to reveal the DIMM sockets? Any special tools required? Will the existing module be 1 x 4Gb, with a spare socket to add 4Gb? Or will it be 2 x 2Gb, in which case I have to discard both and replace with 2 x 4Gb?
View 3 Replies
View Related
Jun 1, 2011
I have Lenovo S10-3T convertible with touch screen. The touch screen worked perfectly with windows 8 pro but after upgrading to windows 8.1, the windows doesn't recognize my touch screen at all and I can't find (pen and touch) option in the control panel. Even in windows system information, I got (No pen or touch input is available for this display). What do I have to do to get my multi-touch screen working again on windows 8.1?
View 9 Replies
View Related
Jan 7, 2014
Just upgraded the 24GB msata to a 120 GB msata and I'm having trouble cloning the hard drive over to the ssd with Clonezilla. The plan is to move the OS to the msata ssd and wiping the original hard dirve and using it for back-up and storage. The BIOS is current set to AHCI with Lagency OS support active but trying UEFI first. I've done this before with win 7 systems; but this is my first foray into win 8.1 w/UEFI. The system does recognize and access the 120 GB Crucial M500 msata disk; it just won't mirror the 8, win-8 partitions. I reinstalled the HD and rebooted the system; to ensure I didn't mess something up and everything seems to be working; though on the slow hard drive.
I did boot from the USB drive with Clonzillia on it and used the drive to drive cloning option...
View 4 Replies
View Related
Sep 17, 2014
I have bought a S400 Touch laptop 2 months back. Now it is saying my Windows is about to expire and it is asking for an activation key. I Did not get any activation key. How can I get rid of this issue.And also my touch is not working properly. How can I get service regarding this.
View 6 Replies
View Related
Aug 11, 2013
My Lenovo U430 touch came with a Samsung 128GB SSD. Since it was becoming a little on the small side, I decided to replace it with a Samsung EVO 250GB SSD.
My first thought was to clone the old SSD and then resize the partitions afterwards. I quickly ran into trouble, the cloning didn't work out. So I decided to begin from scratch. So I installed the new SSD and installed a bare Windows 8.1 Pro install.
Although everythings works one thing is still bugging me. For the new Samsung SSD to be bootable I must:
- Disable Secure Boot
- Enable Legacy booting
I thought all the necessary codes were a BIOS / OS thing?
View 9 Replies
View Related
Dec 27, 2013
I have a P400 Touch that was purchased just a few months ago (February I believe) and it's been great so far. This past month, however, I haven't used it (until now) and noticed that my battery icon is stuck on "36% available (plugged in, charging)" but the thing is it's not charging whatsoever. What's worse is that if/when I pull the adapter from the laptop, it cuts off completely. The battery indicator light is steady white when the adapter is plugged in as well.
View 4 Replies
View Related
Oct 22, 2013
I recently updated to windows 8.1, and after the install, my sound did not work. I then when to support, and downloaded and installed the latest sound driver, which worked! For a few minutes... After i restarted my computer, the sound was gone again, and now it does not work at all ......
My whole experince of windows 8.1 have been very bad. My touchpad is buggy, the sound does not work, and my computer in general seems slower, and like it is working on 100% CPU all the time ....
View 6 Replies
View Related
Apr 16, 2014
I just bought a U330 Touch that comes with Windows 8.1 preinstalled. I have several programs that are not compatible with Windows 8.1 so I want to downgrade to Windows 7. I spoke to a Microsoft representative who told be to check with the manufacturer before I downgrade to make sure that the computer is compatible.
View 8 Replies
View Related
Sep 26, 2013
I just bought a Lenovo G500s touch and the touch-screen initially worked though I had rebooted a few times after the screen appeared to freeze. Now you cannot use the touch-screen at all...
View 9 Replies
View Related
Mar 1, 2014
I updated my Lenovo P500 touch lapyop to Windows 8.1. The hot keys do not function. I already updated my BIOS to V 1.21. I also had a problem with my screen brightness. I updated my driver for the display. What do I need to do to fix this?
View 2 Replies
View Related
Oct 12, 2014
i have z500 i can not install synaptic touchpad driver for win 8.1 . i downloaded the latest version of driver from lenovo website and when i was tring to install it , it gave me this error : not appropriate driver was found 1 month ago i was using win 7 and the synaptic touchpad driver was ok ! why i cant install it on win 8.1 ? touchpad works with 1 finger already but i want to user 2 finger scrolling that don't work
View 8 Replies
View Related
Jan 1, 2015
First - temp issues: The bottom of my Y580 has been getting extrememly hot and my temp monitoring program says "GPU temp limit reached".
By hot, I mean if it comes into contact with your skin, it will give a light burn causing a red burn mark. This only occurs when I run something on my 660m like a game or other programs that make use of it. After it gets like this everything begins to freeze up perodicly and FPS drops to un usable levels.
I know the heat is to be expected with performance demanding applications, but this seems abnormally hot. I've opened the case and cleaned the fans and vents.
The fan doesn't seem to kick up very high like it does on Dust Extraction and I can't find anything to control fan speeds. I've also noticed that the AC power brick gets hot enough to melt thin plastic, like a grocery bag.
While the temps aren't a huge concern, the performance impact/FPS drops is. What can I do about this temperatures other than put a "caution contents may be hot" sticker on my laptop?
Second - black flash. Occasionally (once and hour) during a game or program running on my 660m the screen will have an all black flash for 0.5 second.
If I tab out and have a window running over a program running on the 660m the screen will begin to flicker all black for that window only. Like task manager over a 3d game. Drivers and everything are up to date and I've done clean installs.
View 2 Replies
View Related
Jun 22, 2012
Ever since I got the laptop over a year ago, the audio was never working properly for me. Every time a sound was played there would be a staticky sound played with the audio.
The same thing happens when I use headphones with it. The laptop is also out of warranty so I don't know what to do.
View 4 Replies
View Related
Dec 29, 2013
I've had my P400 for a few years now and today it stopped charging. Not like where it says "plugged in, not charging" but the battery isn't getting any power, when I plug my charger into the port on the side I noticed that the battery light that normally . I took it apart and I checked where you plug it in because I found that this is a common problem with laptops, but it's fine.
View 5 Replies
View Related
Nov 23, 2014
I have a U430 touch with 500 GB + 8GB SSD, and it has 4 GB RAM
I would like to buy on my own a 256 full SSD drive and replace the original HD and also I would like to add extra 4 GB of RAM.
Is it possible?
I know that there are some computer with chips welded to the board so no changes can be made,.
View 6 Replies
View Related
Mar 12, 2014
Well after i reformat my pc the gray window that shows after you touch one of the five touch sensitive button doesn't show.same goes when you Fn+F5 which supposed to show WLAN and bluetooth card settings. What application or something i have to install for this?
View 2 Replies
View Related
Feb 18, 2014
I recently got a U430 but, when I connect it to my Dell S2240L monitor using an HDMI cable, the U430 doesn't detect it. I've tested the monitor and cable. The display driver that came on the machine is from Intel (version 10.18.10.3379). The supported display driver listed on the Lenovo site is also from Intel but for an earlier version (10.18.10.3277). I've read a number of threads about a second monitor not being detected.
View 3 Replies
View Related
Aug 19, 2014
My friend bought a U430 Touch with Windows 8. He hated Win 8 so downgrade to Win 7. Now the wireless dowsn't work. Ethernet works fine and we are able to get on the internet, but wireless does not work at all. I've been to Lenovo's site and downloaded the drivers from their support site, but nothing weems to work. Is there a special driver I'm missing?
View 5 Replies
View Related
Sep 18, 2013
I had to uninstall my Motion Control Software for my U430 Touch software due to an error. I see it is not anywhere online, if it isn't too much trouble could Lenovo put the software up either here or on the drivers webpage?
View 3 Replies
View Related