I've had my P400 for a few years now and today it stopped charging. Not like where it says "plugged in, not charging" but the battery isn't getting any power, when I plug my charger into the port on the side I noticed that the battery light that normally . I took it apart and I checked where you plug it in because I found that this is a common problem with laptops, but it's fine.
View 5 RepliesI have a P400 Touch that was purchased just a few months ago (February I believe) and it's been great so far. This past month, however, I haven't used it (until now) and noticed that my battery icon is stuck on "36% available (plugged in, charging)" but the thing is it's not charging whatsoever. What's worse is that if/when I pull the adapter from the laptop, it cuts off completely. The battery indicator light is steady white when the adapter is plugged in as well.
View 4 Replies View RelatedI used my brightness down button once and now it won't go back up. I can't adjust the settings at all, despite the graphic on the screen showing me the meter going up and down. I've checked all drivers, tried uninstalling and reinstalling lenovo energy management, and I've still got nothing. I've stopped short of a factory reset because that's super annoying having set everything up and then a couple weeks after purchase have to do it again.
View 9 Replies View Relatedi tried to update the firmware but it tells me "No battery attached requires firmware update"
i tried uninstall and install energy management also didn't work
The Screen LED Backlight is no working? My computer is a IdealPad P400 .....
View 2 Replies View RelatedI recently purchased an Ideapad P400, and I have noticed that the default for the keys where F1 and F2, etc. usually are, are now the mute and volume buttons. To access the F1, F2....F12 keys, you now have to press Fn + your desired F key.
While I understand many people probably find this useful, I play several games where these keys are essential, and it makes playing the games nearly impossible to play if you have to hold down the Fn key in addition to the desired F key. So my question is, is it possible to reverse the Function keys? I would much rather press Fn + F1 to mute than have to press press Fn + F1 to access F1.
I have an ideapad p500, and for a while now the battery indicator in windows has said "60% available (plugged in, not charging)".
I have upgraded the battery firmware with the available download on this site, but its still not charging above 60%.
what type or model of battery the U530 Touch uses? Also, is the same battery used by any other Lenovo laptops by any chance?
View 1 Replies View RelatedI recently just received my Ideapad y510p laptop back, and I unplugged it and the battery dropped to 60% but when I try to charge my laptop, it'll just stay at 60%. The battery says its plugged in but it won't charge.
View 7 Replies View RelatedThe battery is not charging at a level. So.., I already updated latest bios for it.
View 4 Replies View Relatedplugged in but not charging message is displayed
View 5 Replies View RelatedMy battery stops charging around 58%. I have the power plan set to "optimized battery lifespan". I understand it has something to do with a charge/discharge threshold setting. How do I go about changing that? Also, what would be a good level to set it to (good for battery health).
View 9 Replies View RelatedI'm having this problem where my battery is plugged in but it is not charging. I tried a few solutions but it doesn't work. I just bought this laptop Lenovo G400s almost a month ago.
[URL]
I have an Ideapad S510p touch Notebook that i bought just last year.But now since the past 1 or 2 weeks i have noticed that my laptop's battery is getting discharged really fast.
View 4 Replies View RelatedMy p500 shows that it is at 40% and that it IS charging (most of the other stops states that it isn't charging). It could be that windows thinks the battery is charging, but it obviously isnt because when I pull the power plug, the laptop immediatley shuts off. Obviously the battery doesn't have a charge.
I got the latest version of the lenovo energy manager, but that didn't do anything. Also, I don't recall the enery manager being there. I am almost certain that it was not there prior to windows 8.1 upgrade.
Device Manager shows all of the hardware with no missing drivers/unknown hardware.
I have been running the battery conditioner which is suppose to run the battery down and then charge it back up. That has been going on for a few hours and it is still at 40%, where it has been stuck from the start.
My Lenovo G570 battery is stuck at 90%. It says plugged in, not charging. It just happened over night. Next day battery refuse to work.
In windows it says battery 90% and is not charging but battery has no charge at all. When I disconnet the A/C power laptop just shutdown immediately. As soon as I unplug the power laptop just shutdown as there is no charge in the battery.
I did reinstalled the Power management and also updated it. I all unplugged reboot in OS, restart, put battery back and boot into the OS back. Nothing seems to work.
I just installed Lenovo Energy Management in windows 8 before I was trying in windows 7. In the battery tab there are two options
Maximum battery Life Optimized battery Health. It is selected to "Optimized battery Health" and won't change regardless of power plan. I click on "Maximum battery Life" and when I open the app again it reset it to "Optimized battery Health".
Lenovo Solution Center say that battery life is GOOD. "Your battery is in good condition".
I bought my lenovo z400 ideapad beginning of April this year and just about two days ago it just turned off and though I plugged it in later it started saying 'plugged in but not charging'. What do you think is the problem?
Furthermore I lost the receipt ( the sales receipt) but there is still the model/series no. , is the warranty still on?
I installed windows 8.1 pro with WMC on my lenovo z510 laptop and installed energy management driver from laptop's drivers dvd. After I installed LEM (lenovo energy management) i started the gauge reset process for my laptop.
After some hours i saw nothing is happening so i made a mistake and cancelled gauge reset in the management software and after that when i restarted my laptop my battery icon says PLUGGED IN CHARGING but it just remians on 0% !!!!!
Problem solved by for example uninstall and reinstalling MICROSOFT ACPI. but notice that i reinstalled my windows 8.1 ! i changed in to windows 7 ! again changed it to windows 8.1 !!!
I updated the energy management software ! nothing happened !
Then try to restart to BIOS menu and from there restore BIOS defaults ! but i couldn't enter BIOS from any ways ! from pressing F1 ! from the way based on windows 8.1 and UEFI frimware settings (somthing like that) ! from none of them i could enter the BIOS!
So now my battery is still facing the problem !you know that it's not easy to unattatch and reattatch z510 battery that is internal ! so at last i must say that i've checked a lot of ways and now my battery is still having problem !
Can i disable battery charging on thinkpad x201, so i don't need to pull out my battery every time? Because although my battery stop charging when it is fully charged i don't want to use battery as power sourse after that.
View 6 Replies View RelatedI have a problem with my Lenovo ThinkPad X300 computer. The battery charging stuck at 99% (remaining capacity about 69% and 300 cycles). The Power Manager displays, the battery is at 100% but "status" periodically changes - both Power Manager and Windows battery indicator - between "No activity" and "Charging".
Every time stuck at the same "Remaining capacity". As i noticed during battery user windows and the Power Manager displays different information about the remaining battery level and time.
I had brought a new G500 Lap it was nice to work with it, but fo past two days when i connected it with charger it shows me "Plugged In, not charging". what to di with it but some times to get charging .
View 7 Replies View Relatedi have a very peculiar problem with my lenovo g550 lap, i kept it aside without using for 2 days, when i switched on the next day it didn't start, i removed the battery and tested but nothing worked only the battery charging light was glowing. suddenly after an hour and half it started working automatically and it worked fine throughout the day, next day i had same problem it started about 2hrs later...
View 9 Replies View RelatedI own an Ideapad Z-500 notebook with Win 8.1 pro.
My battery is at locked at 59% of charge and even if i connect the power plug it doesn't charge any more.
I had the same problem a few months ago and I run run the "Battery Firmware Update" i found here: [URL] ....
It worked for then, but now I have the same problem once again and firmware update doesnt work anymore because my firmware is already up to date.
i have a lenovo g470 laptop installed with Win 8
1.laptop is not charging and the battery level is stuck in 2% [AC plugged]
2.battery is not draining as well it's stuck on 0% for more than hour [on battery
I was just wondering what the average time was for a totally dead y510p to charge while using it for some light browsing on the internet. It seems to charge really slow especially after it reaches about 80 percent or so. I was curious to see what other owners have had in terms of charge time. I seem to have narrowed it down to about 5 percent every 10 minutes while my cousins HP charges way faster. Not too upset about it but a bit curious. For example as I am typing this out it's been at 99% for the past 20 minutes or so, and HW monitor shows it charging really slowly but when its at like 50 percent it charges at a decent rate maybe about 10 mwh every 5 seconds or so.
View 3 Replies View RelatedI have the issue that my newly bought Yoga 11 (three weeks ago) is charging whenever it seems to feel like. The first time I have charged it, it went up to 92 % telling me its now in power state and not charging. This happened triple. Yesterday my Yoga was beneath the 50 % mark and I plugged in the powercable, the same again: not charging. I unplugged the power cable and at 0 % and a shutdown I booted it and it charged perfectely up to 99 % without moaning. I unplugged the cable and at 77 % the same again, I plugged in the power cable and it charged up to 99 % again.
Is this a bug (battery problem) or a feature (thresholds for a long living battery)?
My battery is at 0% available, plugged in charging, but it never goes about 0%. I've tried resetting the battery gauge in Energy Manger 1.0.1.49 but that only runs for a few seconds and reports that the gauge reset is complete. I've also disabled the ACPI control in device manager then enabling it and the icon appears to be charging but only for a few seconds then stops. Having conservation mode on or off doesn't seem to make any difference.
The latest BIOS is installed and I believe I have the latest version of Energy Manager.
For some reason, but seemingly all of a sudden, when I plug my T530 in, the battery does not charge. When I move my cursor over the "power" icon in desktop mode, the message "Plugged in, not charging" appears. How do I alter this, so that I may charge my battery?
View 3 Replies View RelatedWith this laptop, the CPU usage rises significantly whenever the battery is charging. If I'm on running on battery power or it's fully charged, I don't have this problem. The CPU stays at 2-3% while browsing the internet, for example. But browsing the internet while the battery is charging will send the CPU up to 90-100%. It's not just browsing the internet, but any task, such as running Sony Vegas, using Skype, watching a movie, etc.
Again, this only happens while the battery is charging. Everything runs much, much slower. All power management settings are identical whether it be running on battery or charging with the AC adapter, so it's not that. I am also using the 65w power adapter that was supplied with the computer, and the adapter becomes very hot to the touch while charging.
How easy is it to increase the RAM in a U330 touch (from the 4Gb supplied)? Is there a plate on the underside which can be unscrewed to reveal the DIMM sockets? Any special tools required? Will the existing module be 1 x 4Gb, with a spare socket to add 4Gb? Or will it be 2 x 2Gb, in which case I have to discard both and replace with 2 x 4Gb?
View 3 Replies View Related