Well after i reformat my pc the gray window that shows after you touch one of the five touch sensitive button doesn't show.same goes when you Fn+F5 which supposed to show WLAN and bluetooth card settings. What application or something i have to install for this?
View 2 Replies
The touch sensitive eject button on my new Studio 15 laptop appears to be stuck on. When I reboot the laptop, the media control lights flash back and forth as normal. However, the CD drive immediately ejects and the eject button light stays permanently on. This all happens the second the laptop comes on - long before it boots into Vista. This makes me suspect a hardware rather than software issue.
None of the other touch sensitive media controls work.
I've tried cleaning the button, checking for dirt under and on the button and rebooting the laptop. I also rested it overnight.
I only got the laptop on Friday.
I've had my studio xps 16 for 4-5 months now.. never had a serious problem with everything is working the way i want it to but..
this morning when i woke up i turn on music.. while increasing the volume i noticed the touch sensitive LED above the keyboard wasnt working..
I remember reading a thread similar to this a while back but am unable to find it. The fellow had his laptop replaced several times due to the media buttons being too dim when pressed.
I am having the same problem. How bright are your media buttons when you press them? I can barely see them unless I'm right on top of them purposely trying to see what I've pressed.
Is there any way to adjust the brightness of these or am I out of luck? I'm not really in the mood to have the laptop replaced as university classes are about to start back up and I can't be without it.
ive being having problems with make the remote control or the touch-sensitive control to work with any program other than MCE. What im looking for is them to work within other programs like VLC, foobar(winamp/itunes). the detail here is that those programs needs to be running in background
does anyone know how to make it works?
I just received my new DELL XPS 16 from Dell by ordering online. I very much like this laptop, I even ordered it despite all its noted flaws but mine happened to ship with a flaw that now i'm not so happy about.
At first I thought my laptop had a bump where the audio controllers are but I figured that it was raised to be more accessible in the dark or something since you can feel it but after a quick google verification, it seems this is a trait that sometimes occurs when these laptops ship.
Anyway, enclosed is a relevent, high resolution pictures of my laptops raised touch sensitive strip area.
Is disableable even a word?
Anyways, can you disable the touch sensitive controls above the keyboard on this laptop? I have to use the F1-F10 buttons very often in an online game I play, and sometimes accidentally slide a finger over the WiFi touch sensitive button which immediately disables my internet connection so I get disconnected from my game. Very annoying if you have been playing for a while and accidentally touch that thing without being able to get to a save zone.
As for the other buttons besides the WiFi one, if I accidentally touch those, my game gets minimized and I have to wait for the HP Info Center window to load up before I can get back into my game, which by that time my character is already dead.
I looked around sites found with google and couldn't find anything. I never use the touch sensitive buttons besides the volume one (which is rarely used too and could do without if getting rid of the WiFi touch sensitive button means getting rid of all the touch sensitive buttons).
Vista 64bit. The touch controls for the volume, wireless on/off, and mediasmart are not working. i'm getting annoyed with contacting hp over this.
View 9 Replies View RelatedI have a question, isn't there a possibility to change the way how volume increases and decreases. If i press volume button once, then volume increases only 2 points, till 100.
View 3 Replies View RelatedLike you from the first day I had my hands on my Dell Studio 1535 I have the problem with sensitive buttons, eject the cd light stays lit,
the light stays lit lower volume and not permitted me to walk up or down the volume or when the team suspended him again and I fastened to light one of those lights, etc etc.
I changed the panel of sensitive buttons 2 times, thinking the problem was that but never fix the problem .....
HOw do you keep this part of your laptop scratch free? IT's impossible and it's also very very annoying.
View 3 Replies View RelatedAre there drivers or software that are needed for the Touch-Sensitive Multimedia Controls? I re-installed Windows 7 (for a cleaner start!).All of the Touch-Sensitive keys work but the CD/DVD eject.... will only work as Laptop is booting (but not in Windows).Other programs in Windows will eject the CD..
View 6 Replies View RelatedI need to tunr off or remove my wifi touch button from my dv8t. I have spent the last month searching, removing, reinstalling, and skrewing with this laptop to get it off. nothing works. At the moment, my wifi turns itself on and off 28 time a minute on average.
I have already installed the keyboard driver that doesnt have the hp QLB on it. I have also removed the quick launch button drivers.... im at a loss now.
How easy is it to increase the RAM in a U330 touch (from the 4Gb supplied)? Is there a plate on the underside which can be unscrewed to reveal the DIMM sockets? Any special tools required? Will the existing module be 1 x 4Gb, with a spare socket to add 4Gb? Or will it be 2 x 2Gb, in which case I have to discard both and replace with 2 x 4Gb?
View 3 Replies View Relatedmy brand new lenovo y50 touch. Straight out of the box, everything works beautifully except one major thing: the touch screen doesn't work. I know it is the touch version and settings even calls it "lenovo y50-70 touch" but below that it reads "No pen or touch input available for this display" ...what?? there are also no drivers on lenovo's support page that say anything about touch.
View 4 Replies View RelatedI have Lenovo S10-3T convertible with touch screen. The touch screen worked perfectly with windows 8 pro but after upgrading to windows 8.1, the windows doesn't recognize my touch screen at all and I can't find (pen and touch) option in the control panel. Even in windows system information, I got (No pen or touch input is available for this display). What do I have to do to get my multi-touch screen working again on windows 8.1?
View 9 Replies View RelatedJust upgraded the 24GB msata to a 120 GB msata and I'm having trouble cloning the hard drive over to the ssd with Clonezilla. The plan is to move the OS to the msata ssd and wiping the original hard dirve and using it for back-up and storage. The BIOS is current set to AHCI with Lagency OS support active but trying UEFI first. I've done this before with win 7 systems; but this is my first foray into win 8.1 w/UEFI. The system does recognize and access the 120 GB Crucial M500 msata disk; it just won't mirror the 8, win-8 partitions. I reinstalled the HD and rebooted the system; to ensure I didn't mess something up and everything seems to be working; though on the slow hard drive.
I did boot from the USB drive with Clonzillia on it and used the drive to drive cloning option...
I have bought a S400 Touch laptop 2 months back. Now it is saying my Windows is about to expire and it is asking for an activation key. I Did not get any activation key. How can I get rid of this issue.And also my touch is not working properly. How can I get service regarding this.
View 6 Replies View RelatedMy Lenovo U430 touch came with a Samsung 128GB SSD. Since it was becoming a little on the small side, I decided to replace it with a Samsung EVO 250GB SSD.
My first thought was to clone the old SSD and then resize the partitions afterwards. I quickly ran into trouble, the cloning didn't work out. So I decided to begin from scratch. So I installed the new SSD and installed a bare Windows 8.1 Pro install.
Although everythings works one thing is still bugging me. For the new Samsung SSD to be bootable I must:
- Disable Secure Boot
- Enable Legacy booting
I thought all the necessary codes were a BIOS / OS thing?
I see a message that says 'No Pen or Touch Imput available but the Elan Pointing Device shows up in my task bar. I tried removing the HId components but it did not work
I am running Windows 8.1...
I have a P400 Touch that was purchased just a few months ago (February I believe) and it's been great so far. This past month, however, I haven't used it (until now) and noticed that my battery icon is stuck on "36% available (plugged in, charging)" but the thing is it's not charging whatsoever. What's worse is that if/when I pull the adapter from the laptop, it cuts off completely. The battery indicator light is steady white when the adapter is plugged in as well.
View 4 Replies View RelatedI recently updated to windows 8.1, and after the install, my sound did not work. I then when to support, and downloaded and installed the latest sound driver, which worked! For a few minutes... After i restarted my computer, the sound was gone again, and now it does not work at all ......
My whole experince of windows 8.1 have been very bad. My touchpad is buggy, the sound does not work, and my computer in general seems slower, and like it is working on 100% CPU all the time ....
Some days ago, i bought thinkpad x40 and upgrade OS to win 8. But, touch screen isn't working.
View 8 Replies View RelatedI just bought a U330 Touch that comes with Windows 8.1 preinstalled. I have several programs that are not compatible with Windows 8.1 so I want to downgrade to Windows 7. I spoke to a Microsoft representative who told be to check with the manufacturer before I downgrade to make sure that the computer is compatible.
View 8 Replies View RelatedI just bought a Lenovo G500s touch and the touch-screen initially worked though I had rebooted a few times after the screen appeared to freeze. Now you cannot use the touch-screen at all...
View 9 Replies View RelatedI updated my Lenovo P500 touch lapyop to Windows 8.1. The hot keys do not function. I already updated my BIOS to V 1.21. I also had a problem with my screen brightness. I updated my driver for the display. What do I need to do to fix this?
View 2 Replies View Relatedi have z500 i can not install synaptic touchpad driver for win 8.1 . i downloaded the latest version of driver from lenovo website and when i was tring to install it , it gave me this error : not appropriate driver was found 1 month ago i was using win 7 and the synaptic touchpad driver was ok ! why i cant install it on win 8.1 ? touchpad works with 1 finger already but i want to user 2 finger scrolling that don't work
View 8 Replies View RelatedFirst - temp issues: The bottom of my Y580 has been getting extrememly hot and my temp monitoring program says "GPU temp limit reached".
By hot, I mean if it comes into contact with your skin, it will give a light burn causing a red burn mark. This only occurs when I run something on my 660m like a game or other programs that make use of it. After it gets like this everything begins to freeze up perodicly and FPS drops to un usable levels.
I know the heat is to be expected with performance demanding applications, but this seems abnormally hot. I've opened the case and cleaned the fans and vents.
The fan doesn't seem to kick up very high like it does on Dust Extraction and I can't find anything to control fan speeds. I've also noticed that the AC power brick gets hot enough to melt thin plastic, like a grocery bag.
While the temps aren't a huge concern, the performance impact/FPS drops is. What can I do about this temperatures other than put a "caution contents may be hot" sticker on my laptop?
Second - black flash. Occasionally (once and hour) during a game or program running on my 660m the screen will have an all black flash for 0.5 second.
If I tab out and have a window running over a program running on the 660m the screen will begin to flicker all black for that window only. Like task manager over a 3d game. Drivers and everything are up to date and I've done clean installs.
Ever since I got the laptop over a year ago, the audio was never working properly for me. Every time a sound was played there would be a staticky sound played with the audio.
The same thing happens when I use headphones with it. The laptop is also out of warranty so I don't know what to do.
I've had my P400 for a few years now and today it stopped charging. Not like where it says "plugged in, not charging" but the battery isn't getting any power, when I plug my charger into the port on the side I noticed that the battery light that normally . I took it apart and I checked where you plug it in because I found that this is a common problem with laptops, but it's fine.
View 5 Replies View Related
