Windows doesn't recognize that my U530 Touch Laptop has a touch screen. Worked okay for the first couple of months. I've tried looking for hardware updates and restarting. Computer is only a few months old, so this stinks.
View 9 Replies
I have received 3 of the above model ultrabooks, Windows 8 installed but the touch screen will not work at all. This needs to function.
Does this model support touch screen and if so, how is it enabled. OS fully patched. Pen and Touch seems to be enabled but no response to tests.
what type or model of battery the U530 Touch uses? Also, is the same battery used by any other Lenovo laptops by any chance?
View 1 Replies View RelatedI just got this U530 and wanted to use a dual monitor setup with a monitor that only supports DVI inputs (Samsung SyncMaster BX2335). I bought a cable for the purpose: an HDMI to DVI-D cable. I cannot seem to get the laptop to recognize that there is a monitor attached, however.
Am I going to have to use a port replicator instead or use some sort of USB 3 to DVI setup? I have no other video output options built into this computer.
I have a new U530 I just bought. I need windows 7, so I did a downgrade. I downloaded all the Win7 drivers, and managed to make everything happy except no Wifi. The Win7 drivers on the support site don't have the the hardware ID for this wifi card. In windows 8 it shows Broadcom 802.11ac Network Adapter, with PCVEN)14E4&DEV_43B1&SUBSYS_062E17AA&REV_03, which does not show up in the .inf file for the drivers that install from the wl05w7.exe driver file. Also the setup quits without graceful finish, even if I right click and do run as administrator.
I purchased two of these laptops, but one needs to work with Win 7. I'm willing to switch out the wifi card if you have something that works with Win 7.
I just got a new Ideapad U530 touchscreen laptop yesterday. After a few minutes the keyboard stops working. I uninstalled a few of the Lenovo multimedia programs I don't need. Is there a bios update or a driver I should update after purchase?
View 2 Replies View RelatedBefore the end of 2013 I bought an Ideapad U530 Touch for school and it's been working fine up until a few days ago when the backlight for the left most CTRL key stopped working and shut off completely. Every other key on the board is fine, except for this one. Is there any easy to fix to this problem, or do I need to send the entire computer back?
View 2 Replies View RelatedBattery died on my old laptop and I was told it was because I have it always plug in to the electricity outlet. I don't want this to happen in this new laptop (U-530), but everytime I unplug it from the electricity, the screen goes dark. It is very difficult to use it like that. What should I do to brighten the screen each time I use it without electricity?
View 2 Replies View RelatedI bought this computer on Jan. 1st and so far I love it, however, a few days ago I noticed that everytime I connect or disconnect my charger the screen goes black for a few seconds. It's not the worse problem however it is extremely annoying! I tried checking both the intel graphics settings and power management settings to see if an adjudtment would work but it has not.
View 2 Replies View RelatedI recently got a U430 but, when I connect it to my Dell S2240L monitor using an HDMI cable, the U430 doesn't detect it. I've tested the monitor and cable. The display driver that came on the machine is from Intel (version 10.18.10.3379). The supported display driver listed on the Lenovo site is also from Intel but for an earlier version (10.18.10.3277). I've read a number of threads about a second monitor not being detected.
View 3 Replies View RelatedJust bought a U530 Touch ultrabook (from Lenovo Canada website) and waiting for arrival. The configuration comes with a "Hybrid 500G 5400RPM SSHD(8G)". I want to install an larger capacity SSD drive, either replacing the original HDD or as an additional drive. I may buy a 2.5" SSD (7mm) or I might buy a mSATA SSD (about 256 GB).
I have several questions.
1. Does this version of the U530 have an mSATA slot to install an mSATA SSD as an additional drive?
2. Can I replace the original HDD with a 2.5" SSD (as the only drive) and migrate everything (including Windows 8 OS) to the SSD? If so, please provide specific instructions.
3. Can I replace the original HDD with an mSATA SSD (as the only drive) and migrate everything (including Windows 8 OS) to the SSD? This would mean leaving the space of the original HDD empty. If so, please provide specific instructions.
The truth is I had assumed all U530s would come with an mSATA connection/slot since other configurations can come with a 1TB HDD + 16GB SSD. It was only after reading this forum that I realize that may not be true. I am anxious to buy the SSD but need these answers. I'm interested in the mSATA SDD as the only drive for the weight savings and the lower running temperatures and longer battery life.
my brand new lenovo y50 touch. Straight out of the box, everything works beautifully except one major thing: the touch screen doesn't work. I know it is the touch version and settings even calls it "lenovo y50-70 touch" but below that it reads "No pen or touch input available for this display" ...what?? there are also no drivers on lenovo's support page that say anything about touch.
View 4 Replies View RelatedI purchased the lenovo ideapad u530 about 6 months ago. Recently, there has been a loud whirring/buzzing noise coming from the laptop (possibly the fan?). It is most noticeable at the bottom near the vents. There seems to be no correlation between what I do on the laptop and the noise.
View 5 Replies View RelatedI see a message that says 'No Pen or Touch Imput available but the Elan Pointing Device shows up in my task bar. I tried removing the HId components but it did not work
I am running Windows 8.1...
Some days ago, i bought thinkpad x40 and upgrade OS to win 8. But, touch screen isn't working.
View 8 Replies View RelatedI recently got this computer. When I got it, i tried the webcam and it worked ok. The second time I tried to use it, with the "Camera" Windows app, I get a message that says "To get started, connect a camera".
I googled for solutions and discovered that the "Imaging devices" category had disappeared from the Device Manager.
I downloaded several drivers, and the only one that worked was this one. After installing it, the camera worked ok, and the "Imaging devices" reappeared in the device manager. However, after rebooting the computer, the camera stopped working again and the "imaging devices" category disappeared as well.
This is a temporal solution because everytime I want to use the camera I have to install the drivers first, knowing that sooner or later the camera will stop working and the device will not be recognized by Windows anymore.
I have a U530. I had to restore the laptop to factory configuration. However, after the restore the MMC slot and the USB slots do not work properly. The MMC slot does not work at all. The USB slots will work with newer sticks (3.0?), but not older sticks that I have (which are properly recognized by all other PCs I have running 8.1). I went to the support site and installed the "latest" drivers, but they did not resolve the problem. I tried installing the latest firmware, but it returned "LoadImage() Failed! Access Denied. Error: Update BIOS Failed! Unload Image() Failed! Invalid Parameter. InsydeH20 - Secure Flash. Error: Firmware update failed!!! Please press any key to reset system......"
I've already spent the time to reinstall all my software and really do not have the time to try another reset to factory configuration. How to get my MMC and USB slots working properly.
I used my brightness down button once and now it won't go back up. I can't adjust the settings at all, despite the graphic on the screen showing me the meter going up and down. I've checked all drivers, tried uninstalling and reinstalling lenovo energy management, and I've still got nothing. I've stopped short of a factory reset because that's super annoying having set everything up and then a couple weeks after purchase have to do it again.
View 9 Replies View RelatedIt was working fine a few minutes ago, i closed the laptop for a few moment, but when i came back the screen was black at first. so i did a hard shutdown cause i though the computer crashed or something. but when i turned it back on, it was suddenly white. if i tilt it a bit, it sometimes goes black. I don't know what to do, i used my friends monitor and it worked so it not the computer...
View 1 Replies View RelatedI just bought ThinkPad T430 and optical bay adapter IB-AC642 [URL] for my ssd 128 OCZ VERTEX 4. I put ssd into optical bay but thinkpad doesn't recognize it. I try with different disc but I have the same problem.
My optical bay adapter with this sdd OCZ VERTEX 4 is working in my another laptop so the problem is only with thinkpad. I tried to change bios settings but it didn't work.
My laptop's touch screen function stopped working just a while ago. When I shut down my laptop, tere's this windows update that lasted for more or less an hour. After that, the touch screen just stopped working. Note that there hasn't been any program installation prior to the antivirus uninstallation - all programs and files contained in the laptop is as it was the moment I bought it. *Laptop's running Windows 8 Single Language
View 9 Replies View RelatedI recently updated to windows 8.1, and after the install, my sound did not work. I then when to support, and downloaded and installed the latest sound driver, which worked! For a few minutes... After i restarted my computer, the sound was gone again, and now it does not work at all ......
My whole experince of windows 8.1 have been very bad. My touchpad is buggy, the sound does not work, and my computer in general seems slower, and like it is working on 100% CPU all the time ....
I just bought a U330 Touch that comes with Windows 8.1 preinstalled. I have several programs that are not compatible with Windows 8.1 so I want to downgrade to Windows 7. I spoke to a Microsoft representative who told be to check with the manufacturer before I downgrade to make sure that the computer is compatible.
View 8 Replies View Relatedmy new T440p with built-in WWAN Ericsson N5321gw doesn't recognize the SIM-Card. I'm running Win7 64 Bit and in the device manager, I can see the Ericsson device showing up without any errors. Once I launche Access Connections, I receive the error message there's no SIM card inserted and I should insert the SIM and try again. The SIM is inserted as shown next to the slot (although I tried other ways, too). I tried two different SIM-cards just to be safe, both SIM-cards are working in my phone.
View 9 Replies View RelatedI just got my new carbon touch thinkpad today, and I couldn't be happier, until I closed the lid and reopened it a couple of minutes later. The screen froze for a while and then I got a BSOD with the notice CRITICAL_PROCESS_DIED. I hoped it would be just some coincidence, and updating my drivers and installing windows updates would solve it. So I did, and closed the lid again. After reopening it, I got the same error. So I figured I could just as well restore to my factory settings. Without luck. After updating everything for a second time, still no luck. I check the disk and did a memory check, but everything seems fine. The lenovo Solution center isn't reporting any issues either. I looked into the minidump created by the blue screen, and it seemed the process failing is called csrss.exe.
View 9 Replies View RelatedMy friend bought a U430 Touch with Windows 8. He hated Win 8 so downgrade to Win 7. Now the wireless dowsn't work. Ethernet works fine and we are able to get on the internet, but wireless does not work at all. I've been to Lenovo's site and downloaded the drivers from their support site, but nothing weems to work. Is there a special driver I'm missing?
View 5 Replies View RelatedI just got my X1 Carbon with touch screen preinstalled with WIndows 8.1.
Wonderful machine, but I hate Windows 8. I can say a lot about that, but let's just state tha fact that I'm not compatible with Windows 8.
Can I install Windows 7 intead? If so, how? Since there's no DVD drive in the system.
And if I install Windows 7, will I lose touch funtionality? WIll I lose other things? (apart from things in Windows 8 of course)
I'm using windows 8.1 and my Touchpad doesn't recognize Elantech driver.
I already installed driver from Dell drivers website.
The problem is all my key fn function work but the enable/disable Touchpad doesn't work.
And I don't see any option to customize my Touchpad.
Only left click, right click, moving pointer are working, but scrolling doesn't work.
I think the driver isn't installed or maybe it isn't compatible with windows 8.1.
I have the Y510P with Windos 8.1, latest graphic drivers. I'm connecting it to my HD TV via HDMI and the image doesn't fit well in my TV, it's a little zoomed in. I've been searching for a solution in all the menus from Intel's HD 4600, nVIDIA's Control Panel, Windows scaling... NOTHING works. I have another laptop and it has an option that scales the image and the TV shows what is supposed to show.
How can I solve that and fit what I see in my laptop's screen in the second screen (TV)?
My laptop: Lenovo Y510p, Intel Quad-Core i7-4700MQ up to 3.4GHz, Intel HD Graphics 4600, nVIDIA GeForce GT 755M 2GB GDDR5, 8GB RAM, 15.6" Full HD, 1TB 5400rpm HDD + 24GB SSD M.2 (cache), Intel Wireless-N 7260, 72Wh
So I recently updated my u310 Touch to Windows 8.1. My audio isn't working anymore. I've checked the drivers, and updated all that come with the Windows 8.1 update.
My Device Manager says that my Conexant SmartAudio HD is updated, and so is my Intel (R) Display Audio. To make sure, I downloaded and installed the drivers from the Lenovo support site. When I try to play something on iTunes or on Windows Media Player, it just stops, and no sound is emmited. Youtube, or any other music player on the web, isn't working either.
