Lenovo U/S Series :: U530 - Win 7 Downgrade / WiFi Doesn't Work
Aug 25, 2014
I have a new U530 I just bought. I need windows 7, so I did a downgrade. I downloaded all the Win7 drivers, and managed to make everything happy except no Wifi. The Win7 drivers on the support site don't have the the hardware ID for this wifi card. In windows 8 it shows Broadcom 802.11ac Network Adapter, with PCVEN)14E4&DEV_43B1&SUBSYS_062E17AA&REV_03, which does not show up in the .inf file for the drivers that install from the wl05w7.exe driver file. Also the setup quits without graceful finish, even if I right click and do run as administrator.
I purchased two of these laptops, but one needs to work with Win 7. I'm willing to switch out the wifi card if you have something that works with Win 7.
Overnight, my Z470's wifi stopped work. The switch nor FN seems to turn the wifi on again, but I dont think the device is damaged or something. I tried everything I could.
1) Update driver / Uninstall and update driver / delete and update driver 2) Try to work on WLAN in services.msc but I couldn't find it in there 3) Some people says that could be the power management, I'm still trying to find the compatible version.
So, what else can I do? I don't wanna to format my machine!
Windows doesn't recognize that my U530 Touch Laptop has a touch screen. Worked okay for the first couple of months. I've tried looking for hardware updates and restarting. Computer is only a few months old, so this stinks.
I updated my Thinkpad with windows 8.1. But the wifi driver doesn't work correctly. After the installation the device was diasabled with code 10. I searched for a new driver and found one from Realtek for win 8. After this installation and the reboot, the wifi works fine. Restarting the notebook again, the device was disabled again. I tried a lot of different drivers - it's always the same: After the first installation and reboot it works, after the second boot, the device is disabled again.
I have a problem that my 'up' key doesn't work at all. It's important because I need it to brighten my screen with 'Fn' key. Is it possible to brighten the screen somehow without using 'Fn' key? the 'up' key seems to be not working at all...
Laptop just arrived! However, my N key doesn't work 4 out of 5 times. I have slowed my typing down so I can verify I am pressing the key firmly enough and I am. I have to press it multiple times for it to finally type the letter N.
i just got my z710 the other day. clone the drive (for a rainy day). Then formated and installed Win7 Pro 64bit. i managed to get everything else in working order except i would like to occasionally turn off the touchpad. i use a mouse for games and such and the hot key doesnt work to turn it off. BTW every other hot key does what its intended to do.
My problem is that suddenly keyboard isn't working in windows . it works while entering password, after that it doesn't work . knowing that yesterday it was working properly.
I migrated win 8.1 to the ssd on my wd black2 (128ssd + 1tb hdd). It also took the first two partitions shown. I then activated the 1tb drive and copied the next two paritions to the SSD in the same sequence and size as original drive.
Then I copied the other remaining paritions to the END of my 1tb hdd. So all partitions are there same sizes same sequences as before execpt for the hdd in the middle. See screenshot.
One key makes a backup to the 1tb hdd which is what I wanted so as to save space on the SSD. But the novo button does not work which makes it useless. How can I fix this?
I know theres lots of threads on this but this is specific to having the partitions split on the ssd and the hdd.
Drive 0 is the ssd/hdd drive 1 is the original drive ( that okr worked on) its a y510p
i recently upgraded my g500 from windows 8 to windows to 8.1. But ever since then, my mouse does not work and the keyboard only works after standby. I tried to restore to factory defaults but that hasnt worked.
The cursor doesn't even display on screen unless I connect a mouse.
It was working fine then suddenly the problem started. I tried FN + F6 but no point
I tried installing this driver : [URL] .... But that didn't solve the problem
I entered device manager >> view by connection type, and I found "Lenovo Pointing Device" with a yellow triangle on it. I uninstalled it and it disappeared forever............. But the problem is still there. It's as if the entire touchpad cable isn't even connected to the motherboard.................
I have a big problem on my Lenovo U310, my wecamera doesn't work, i don't manage to find neither in device manager and i've tried to reinstall all the drivers, even with recovery button but with zero results.
The trackpoint middle scrolling button doesn't work for some of the newer applications such as ITunes, the newest versions of Picasa, Windows Live Mail, Safari, and Windows Live Writer.
Below is a fix applicable to all Windows OS's. The location of the edited file may vary so look in the Device Manager under trackpoint driver details to find driver locations.
The file must be edited as an administrator in Vista and Windows 7. To do this, at the programs box type in notepad and on the notpad program in the menu right click and select, "Run as Administrator."
In Win7 x64 it is located at: (edit with Notepad run as Administrator).
c:Program FilesLenovoTrackpoint p4table.dat
; Google Picasa *,*,picasa3.exe,*,*,*,WheelStd,0,9
; Windows Live Mail *,*,wlmail.exe,*,*,*,WheelStd,0,9
; Windows Live Writer *,*,WindowsLiveWriter.exe,*,*,*,WheelStd,0,9
I started using my laptop with Windows 8 and everything was working fine. But then Windows upgraded to 8.1 and now I cannot get the Dolby Home Theater v4 to start, I always get the error message about driver.
Just bought a U530 Touch ultrabook (from Lenovo Canada website) and waiting for arrival. The configuration comes with a "Hybrid 500G 5400RPM SSHD(8G)". I want to install an larger capacity SSD drive, either replacing the original HDD or as an additional drive. I may buy a 2.5" SSD (7mm) or I might buy a mSATA SSD (about 256 GB).
I have several questions.
1. Does this version of the U530 have an mSATA slot to install an mSATA SSD as an additional drive?
2. Can I replace the original HDD with a 2.5" SSD (as the only drive) and migrate everything (including Windows 8 OS) to the SSD? If so, please provide specific instructions.
3. Can I replace the original HDD with an mSATA SSD (as the only drive) and migrate everything (including Windows 8 OS) to the SSD? This would mean leaving the space of the original HDD empty. If so, please provide specific instructions.
The truth is I had assumed all U530s would come with an mSATA connection/slot since other configurations can come with a 1TB HDD + 16GB SSD. It was only after reading this forum that I realize that may not be true. I am anxious to buy the SSD but need these answers. I'm interested in the mSATA SDD as the only drive for the weight savings and the lower running temperatures and longer battery life.
I have had the HP 620 laptop for about a year now , Recently upgraded it to windows 8 . So... as soon as i open my laptop , everything is fine and the wifi works and everything is basically normal , but when i use the laptop for like 10 min , the wifi randomly shuts off and tells me that i need to connect via an Ethernet cable, and when i do connect to ethernet cable it works . I am on windows 8.
I purchased the lenovo ideapad u530 about 6 months ago. Recently, there has been a loud whirring/buzzing noise coming from the laptop (possibly the fan?). It is most noticeable at the bottom near the vents. There seems to be no correlation between what I do on the laptop and the noise.
Battery died on my old laptop and I was told it was because I have it always plug in to the electricity outlet. I don't want this to happen in this new laptop (U-530), but everytime I unplug it from the electricity, the screen goes dark. It is very difficult to use it like that. What should I do to brighten the screen each time I use it without electricity?
I recently got this computer. When I got it, i tried the webcam and it worked ok. The second time I tried to use it, with the "Camera" Windows app, I get a message that says "To get started, connect a camera".
I googled for solutions and discovered that the "Imaging devices" category had disappeared from the Device Manager.
I downloaded several drivers, and the only one that worked was this one. After installing it, the camera worked ok, and the "Imaging devices" reappeared in the device manager. However, after rebooting the computer, the camera stopped working again and the "imaging devices" category disappeared as well.
This is a temporal solution because everytime I want to use the camera I have to install the drivers first, knowing that sooner or later the camera will stop working and the device will not be recognized by Windows anymore.
I have a U530. I had to restore the laptop to factory configuration. However, after the restore the MMC slot and the USB slots do not work properly. The MMC slot does not work at all. The USB slots will work with newer sticks (3.0?), but not older sticks that I have (which are properly recognized by all other PCs I have running 8.1). I went to the support site and installed the "latest" drivers, but they did not resolve the problem. I tried installing the latest firmware, but it returned "LoadImage() Failed! Access Denied. Error: Update BIOS Failed! Unload Image() Failed! Invalid Parameter. InsydeH20 - Secure Flash. Error: Firmware update failed!!! Please press any key to reset system......"
I've already spent the time to reinstall all my software and really do not have the time to try another reset to factory configuration. How to get my MMC and USB slots working properly.
I am running Windows 8.0 (64bit) and my wifi is not working properly on Battery mode. On AC Adapter, it works 100% perfect but in battery mode, it always goes to Limited Connectivity. Repaired it but 25seconds later it gets the same problem. Limited Connectivity every single time. It's an endless cycle. Warranty has expired and I am not happy with it.
Even if repaired, cannot open any website. Full 5 wifi bars but still the same result. Tried manually (TCP/IP Settings IPv4) but didnt work at all.
My wifi driver is Intel Centrino Wireless N 2230 ( 15.12.0.6 version updated from intel.com website).
Product number C2Y46AV (HP ENVY DV6 NOTEBOOK PC)
Tried everything that I could possibly think off such as disabling Norton Firewall & Running windows firewall but still the same problem.
I just got this U530 and wanted to use a dual monitor setup with a monitor that only supports DVI inputs (Samsung SyncMaster BX2335). I bought a cable for the purpose: an HDMI to DVI-D cable. I cannot seem to get the laptop to recognize that there is a monitor attached, however.
Am I going to have to use a port replicator instead or use some sort of USB 3 to DVI setup? I have no other video output options built into this computer.
I have a HP Pavilion 17-e067cl Notebook PC, it came with Windows 8 pre-installed. I really hate windows 8 so I downgraded, but now my wifi-related drivers are down.
I bought this computer on Jan. 1st and so far I love it, however, a few days ago I noticed that everytime I connect or disconnect my charger the screen goes black for a few seconds. It's not the worse problem however it is extremely annoying! I tried checking both the intel graphics settings and power management settings to see if an adjudtment would work but it has not.
I just got a new Ideapad U530 touchscreen laptop yesterday. After a few minutes the keyboard stops working. I uninstalled a few of the Lenovo multimedia programs I don't need. Is there a bios update or a driver I should update after purchase?
so basically I reinstalled windows 7 Home Premium x64 Operating System and it seems that some drivers are missing. I bought a new hard disk and 4 G of ram..I installed them and the laptop is HP Pavilion dv6-2137sl , Intel Core i5 CPU m430 , 2.27 GHz with 6 G of ram now.When I looked at the Device Manager. I saw at Other devices : Base System Device Base System Device Base System Device Network Controller Unknown device Unknown device. All have yellow triangle. I tried to install a driver, the Realtek PCIe GBE Family Controller Driver but after the installation it gives me the next message : The Realtek Network Controller was not found.If Deep Sleep Mode is enabled Please Plug the Cable.
I have an Presario CQ57-383SQ and in device manager, network controller has no driver and i can`t find it and my WI-FI doesn't work it shows that is disabled from device manager i thins it is because of the network controller driver.
And one more....PCI device has no driver and I don't know where to find it.
Before the end of 2013 I bought an Ideapad U530 Touch for school and it's been working fine up until a few days ago when the backlight for the left most CTRL key stopped working and shut off completely. Every other key on the board is fine, except for this one. Is there any easy to fix to this problem, or do I need to send the entire computer back?
