Lenovo P/Y/Z Series :: Z710 - N Key Doesn't Work 4 Out Of 5 Times
Jun 28, 2014
Laptop just arrived! However, my N key doesn't work 4 out of 5 times. I have slowed my typing down so I can verify I am pressing the key firmly enough and I am. I have to press it multiple times for it to finally type the letter N.
i just got my z710 the other day. clone the drive (for a rainy day). Then formated and installed Win7 Pro 64bit. i managed to get everything else in working order except i would like to occasionally turn off the touchpad. i use a mouse for games and such and the hot key doesnt work to turn it off. BTW every other hot key does what its intended to do.
I started using my laptop with Windows 8 and everything was working fine. But then Windows upgraded to 8.1 and now I cannot get the Dolby Home Theater v4 to start, I always get the error message about driver.
I have a problem that my 'up' key doesn't work at all. It's important because I need it to brighten my screen with 'Fn' key. Is it possible to brighten the screen somehow without using 'Fn' key? the 'up' key seems to be not working at all...
My problem is that suddenly keyboard isn't working in windows . it works while entering password, after that it doesn't work . knowing that yesterday it was working properly.
Overnight, my Z470's wifi stopped work. The switch nor FN seems to turn the wifi on again, but I dont think the device is damaged or something. I tried everything I could.
1) Update driver / Uninstall and update driver / delete and update driver 2) Try to work on WLAN in services.msc but I couldn't find it in there 3) Some people says that could be the power management, I'm still trying to find the compatible version.
So, what else can I do? I don't wanna to format my machine!
I have a new U530 I just bought. I need windows 7, so I did a downgrade. I downloaded all the Win7 drivers, and managed to make everything happy except no Wifi. The Win7 drivers on the support site don't have the the hardware ID for this wifi card. In windows 8 it shows Broadcom 802.11ac Network Adapter, with PCVEN)14E4&DEV_43B1&SUBSYS_062E17AA&REV_03, which does not show up in the .inf file for the drivers that install from the wl05w7.exe driver file. Also the setup quits without graceful finish, even if I right click and do run as administrator.
I purchased two of these laptops, but one needs to work with Win 7. I'm willing to switch out the wifi card if you have something that works with Win 7.
I migrated win 8.1 to the ssd on my wd black2 (128ssd + 1tb hdd). It also took the first two partitions shown. I then activated the 1tb drive and copied the next two paritions to the SSD in the same sequence and size as original drive.
Then I copied the other remaining paritions to the END of my 1tb hdd. So all partitions are there same sizes same sequences as before execpt for the hdd in the middle. See screenshot.
One key makes a backup to the 1tb hdd which is what I wanted so as to save space on the SSD. But the novo button does not work which makes it useless. How can I fix this?
I know theres lots of threads on this but this is specific to having the partitions split on the ssd and the hdd.
Drive 0 is the ssd/hdd drive 1 is the original drive ( that okr worked on) its a y510p
i recently upgraded my g500 from windows 8 to windows to 8.1. But ever since then, my mouse does not work and the keyboard only works after standby. I tried to restore to factory defaults but that hasnt worked.
The cursor doesn't even display on screen unless I connect a mouse.
It was working fine then suddenly the problem started. I tried FN + F6 but no point
I tried installing this driver : [URL] .... But that didn't solve the problem
I entered device manager >> view by connection type, and I found "Lenovo Pointing Device" with a yellow triangle on it. I uninstalled it and it disappeared forever............. But the problem is still there. It's as if the entire touchpad cable isn't even connected to the motherboard.................
I have a big problem on my Lenovo U310, my wecamera doesn't work, i don't manage to find neither in device manager and i've tried to reinstall all the drivers, even with recovery button but with zero results.
The trackpoint middle scrolling button doesn't work for some of the newer applications such as ITunes, the newest versions of Picasa, Windows Live Mail, Safari, and Windows Live Writer.
Below is a fix applicable to all Windows OS's. The location of the edited file may vary so look in the Device Manager under trackpoint driver details to find driver locations.
The file must be edited as an administrator in Vista and Windows 7. To do this, at the programs box type in notepad and on the notpad program in the menu right click and select, "Run as Administrator."
In Win7 x64 it is located at: (edit with Notepad run as Administrator).
c:Program FilesLenovoTrackpoint p4table.dat
; Google Picasa *,*,picasa3.exe,*,*,*,WheelStd,0,9
; Windows Live Mail *,*,wlmail.exe,*,*,*,WheelStd,0,9
; Windows Live Writer *,*,WindowsLiveWriter.exe,*,*,*,WheelStd,0,9
Just purchased Z710 laptop. I am astonished at the poor performance while browsing the Internet. My 8 yr old Dell/XP outperforms this thing. I hope there is a relatively simple fix for this or I am in deep trouble. Pages slow to open, videos constantly buffering. Multi-tasking is out of the question.
My Z710 (purchased in April 2014) makes a horrendous buzzing noise when reading a DVD. It appears to be just the DVD faceplate. Oh, and the eject button doesn't work either... so you have to eject through the windows file mgr device control. Neither problem is earth shattering/fatal, but bugs me enough to write this post. Does Lenovo ship a replacement drive in cases like this? I wouldn't dare send in the entire laptop just to have the DVD drive replaced.
BTW, installed Win7x64 on a samsung pro SSD, and this thing is very snappy now. Love the laptop so far with the exception of the track pad which is just about unbearable.
The touchpad on/off function does not persist through system lock/unlock. For instance, with the touchpad disabled, locking my computer will re-enable the touchpad (as will signing back in to my computer account if I take the trouble to disable the touchpad before entering my password).
I permenantly use an external mouse, want to leave my touchpad disabled as it interferes with typing. Thus, I see this as a bug. Is there any way to change this behavior short of a bug report? Perhaps some buried setting?
Running Win 8.1, user is account password protected, but not linked to a Windows live account.
Edit: Laptop has a Synaptics touchpad.
Solution: Solved by going into Control Panel -> Mouse Settings -> Change Mouse settings -> Device Settings -> Settings (Device needs to be enabled for this to be accessible) -> Advance Tab -> Touchpad Status
Under touchpad status, setting was changed to 'keep previous enable/disable status'.
I have problem with my battery. When i unplug AC power laptop is not started. It's running only when the AC is plugged in. Mabe it's a problem with windows 8.1.
I bought this Z710 new but I get a message saying "The battery is unauthorized". Also the battery indicator stays at "0% available (plugged in, not charging)." If I unplug the power cord, the laptop powers off cold. It has always been this way. This is a problem for me because I want to upgrade my BIOS but I can't because I get an error stating "Battry is too low (0 < 30 ). Please charge your battery to 30%." when I try.
How do I get this laptop to start interacting with its battery? I have already tried taking it out and putting it in again and rebooting.
I'm trying to Install Debian GNU/Linux on my Windows 8 Ideapad Z710, and I can't even get my laptop to boot from external media. From the InsydeH20 Setup Utility, I've so far disabled Secure Boot, set Boot Mode to UEFI, enabled USB Boot, enabled PXE Boot to LAN, and set my EFI boot order to 1) EFI Network 0 for IPv4, 2) EFI Network 0 for IPv6, then 3) Windows Boot Manager (no other options). I'm not actually trying to boot from a network, I just want to boot from the onboard DVD drive or my USB DVD drive. When I boot with these settings, I get the error: EFI Network 0 for IPv4 (...) boot failed, then a similar one for IPv6, then it boots to Windows. Why can't I boot from DVD or USB?
Another thing I've tried is setting Boot Mode to Legacy Support and Boot Priority to Legacy First (with Secure Boot disabled) which results in my laptop booting to straight to Windows even when USB ODD is first in the boot order.
I recently purchased a Z710 with 8.1. Is there a way to get a physical or digital copy of my Windows OS in case I ever need to reinstall? OneKey cannot be a replacement for this?
I've just purhased the above for my son who is in hospital having chemo at present. Very disappointed with the battery that is only lasting for approx 1.5 hours. I have it set to a balanced use and so far the laptop has only been used for surfing, etc.
I just got my new Z710 today, and if the screen tilts too far back (not excessively far, maybe a few degrees past 90), the screen will turn black. If I leave the screen in this position, the keyboard lights will turn off too. Once I tilt the screen forward and click or hit a key, I'm greeted by the lock screen, and have to enter my password again.
I have the T540p and the webcam doesn't work at all. When I try using it in Skype and Adobe Connect, I just get the camera icon with a slash through it. I've read in other forums that uninstalling the webcam driver and reinstalling it doens't work. I really need the webcam to work so this is pretty urgent for me.