I have problem with my battery. When i unplug AC power laptop is not started. It's running only when the AC is plugged in. Mabe it's a problem with windows 8.1.
View 5 RepliesZ710 power management can't install, win7 64 because "Windows can't verify the publisher of this driver software"
I pushed the "Install this driver software anyway" but the hardware still wasn't recognized after installation/reboot.
So I installed instead of that the Lenovo Energy Management Software Ver 7.0.3.4 ...
This is working, but I dont know if it is a problem for my system becouse of incompatibility with the battery of Z710.
Any digitally signed driver for my Z710 or I can use the version 7.0.3.4 without problem?
Just purchased Z710 laptop. I am astonished at the poor performance while browsing the Internet. My 8 yr old Dell/XP outperforms this thing. I hope there is a relatively simple fix for this or I am in deep trouble. Pages slow to open, videos constantly buffering. Multi-tasking is out of the question.
View 8 Replies View RelatedMy Z710 (purchased in April 2014) makes a horrendous buzzing noise when reading a DVD. It appears to be just the DVD faceplate. Oh, and the eject button doesn't work either... so you have to eject through the windows file mgr device control. Neither problem is earth shattering/fatal, but bugs me enough to write this post. Does Lenovo ship a replacement drive in cases like this? I wouldn't dare send in the entire laptop just to have the DVD drive replaced.
BTW, installed Win7x64 on a samsung pro SSD, and this thing is very snappy now. Love the laptop so far with the exception of the track pad which is just about unbearable.
Only Fn+space work.
I have Windows 7 Ultimate 64 and why this doesn't work.
The touchpad on/off function does not persist through system lock/unlock. For instance, with the touchpad disabled, locking my computer will re-enable the touchpad (as will signing back in to my computer account if I take the trouble to disable the touchpad before entering my password).
I permenantly use an external mouse, want to leave my touchpad disabled as it interferes with typing. Thus, I see this as a bug. Is there any way to change this behavior short of a bug report? Perhaps some buried setting?
Running Win 8.1, user is account password protected, but not linked to a Windows live account.
Edit: Laptop has a Synaptics touchpad.
Solution: Solved by going into Control Panel -> Mouse Settings -> Change Mouse settings -> Device Settings -> Settings (Device needs to be enabled for this to be accessible) -> Advance Tab -> Touchpad Status
Under touchpad status, setting was changed to 'keep previous enable/disable status'.
I bought this Z710 new but I get a message saying "The battery is unauthorized". Also the battery indicator stays at "0% available (plugged in, not charging)." If I unplug the power cord, the laptop powers off cold. It has always been this way. This is a problem for me because I want to upgrade my BIOS but I can't because I get an error stating "Battry is too low (0 < 30 ). Please charge your battery to 30%." when I try.
How do I get this laptop to start interacting with its battery? I have already tried taking it out and putting it in again and rebooting.
Laptop just arrived! However, my N key doesn't work 4 out of 5 times. I have slowed my typing down so I can verify I am pressing the key firmly enough and I am. I have to press it multiple times for it to finally type the letter N.
View 3 Replies View RelatedI'm trying to Install Debian GNU/Linux on my Windows 8 Ideapad Z710, and I can't even get my laptop to boot from external media. From the InsydeH20 Setup Utility, I've so far disabled Secure Boot, set Boot Mode to UEFI, enabled USB Boot, enabled PXE Boot to LAN, and set my EFI boot order to 1) EFI Network 0 for IPv4, 2) EFI Network 0 for IPv6, then 3) Windows Boot Manager (no other options). I'm not actually trying to boot from a network, I just want to boot from the onboard DVD drive or my USB DVD drive. When I boot with these settings, I get the error: EFI Network 0 for IPv4 (...) boot failed, then a similar one for IPv6, then it boots to Windows. Why can't I boot from DVD or USB?
Another thing I've tried is setting Boot Mode to Legacy Support and Boot Priority to Legacy First (with Secure Boot disabled) which results in my laptop booting to straight to Windows even when USB ODD is first in the boot order.
i just got my z710 the other day. clone the drive (for a rainy day). Then formated and installed Win7 Pro 64bit. i managed to get everything else in working order except i would like to occasionally turn off the touchpad. i use a mouse for games and such and the hot key doesnt work to turn it off. BTW every other hot key does what its intended to do.
View 9 Replies View RelatedHow do I get this to install ? All the other updates were installed on the same day with out a problem.
I have tried some fixes posted on the MS site and none have worked so far.
I have a z710 with OEM win 8.1 installed.
I would like to restoring my PC but I cannot create restoring date earlier than 7 days.
View 3 Replies View RelatedI recently purchased a Z710 with 8.1. Is there a way to get a physical or digital copy of my Windows OS in case I ever need to reinstall? OneKey cannot be a replacement for this?
View 4 Replies View RelatedLenovo ideapad Z710 .... How to disable function keys?
View 9 Replies View RelatedI can't adjust brightness ....
View 3 Replies View RelatedI've just purhased the above for my son who is in hospital having chemo at present. Very disappointed with the battery that is only lasting for approx 1.5 hours. I have it set to a balanced use and so far the laptop has only been used for surfing, etc.
View 2 Replies View RelatedI just got my new Z710 today, and if the screen tilts too far back (not excessively far, maybe a few degrees past 90), the screen will turn black. If I leave the screen in this position, the keyboard lights will turn off too. Once I tilt the screen forward and click or hit a key, I'm greeted by the lock screen, and have to enter my password again.
View 2 Replies View RelatedI started using my laptop with Windows 8 and everything was working fine. But then Windows upgraded to 8.1 and now I cannot get the Dolby Home Theater v4 to start, I always get the error message about driver.
View 2 Replies View RelatedDell latitude D630. when i unplug from ac power, it losses screen brightness instantly. is that normal?
View 1 Replies View RelatedMy T420 doesn't power on at all. I have tried to turn it on with cable, w/o cable, different baterries, removed rams and tried same things, tried holding down power button for 60 secs, tried with an other keyboard and I couldn't manage to start the laptop. No reaction at all, no blinking or anything.
View 4 Replies View RelatedI have z500. I start playing some medium grapic games. After a 1 hour gameplay my graphics start to glitch so i checked my cpu and gpu temp. I saw that CPU temp has reached 99 Celcius but still the fans were dead.
Few minutes later, after what ever reason, fans start to spin and now its cooled downed to 60 C. and keeps spinning in low speed still.
Since i can see the temp, i assume there is no problem in thermometer so i assume its kind of a software deficiency. I am not using any overcload or cooling app, my power settings are set to high performance.
My lenovo B570 is 1month old, when i turn it on it hangs before the user account appears.. its stucked and just saying "Please wait" then i need to turn it off and turn on and on again till it works. Then sometimes when i shut down its also stucked on "Shutting down" I already tried reformatting and its still the same.
View 9 Replies View RelatedSo, my y510p is having really anoying problem.
Sometimes computer works fine (really rarely) but usually it just doesnt start.
I need to press powerbutton atleast 50 times until it finally start, and when it starts the screen is just blinking black and keys are blinking too, the problem becoming more general when it gets "cold" (Cold = normal indoor temperature 22 celsius) it also takes ages to get windows screen
I have already visited warranty with my laptop and it was there 1.5 months, and they changed keyboard (why?!?!) and send it back, they said that they run some tests without any problems. Then i got my computer back, NOTHING CHANGED, same problems and all, what should i do?!
I have already soft-reseted, reseted bios and reseted whole system, nothing works!
My model is the one with 750M and 24gb ssd cache.
I've noticed that my laptop doesn't start at first power on. A push the start button, Lenovo image is showing but after few second the power go off. I need to push again the power button and then the laptop start without problem.
View 7 Replies View RelatedI am using an X1 Carbon (2014 Gen). Win 7 - 64 bit pre installed. Latest finger print manager pro software from lenovo 8.01.07. Tried everything and all possible combinations on the fingerprint software. But can't start my machine by swiping. The reader works perfect otherwise. I can pass bios log on to windows etc. But I still have to go through the power on button. I observe that in the new software (unlike in the earlier ones) there are no start on buttons to be clicked above the fingerprints. how to bypass pressing the power on button and start the machine directly by swiping the enrolled finger?
View 8 Replies View RelatedI somehow managed to delete windows. So how do I start Lenovo OneKey Recovery on s100?
View 1 Replies View RelatedMy friend has a Lenova G580. She said Windows wouldn't boot and gave it to me to fix.
I confirmed that windows does not boot in normal mode, safe mode, or recovery mode using any of the boot options for Windows. It will either sit at a black screen (it looks like it's almost at the GUI) or reboot if in safe mode before it gets to that point.
So after discussion we decided to whipe the machine using the Lenovo OneKey Rescue system. I hit the Lenovo OneKey button next to the power button.
It spends a couple minutes booting and I get the green grass background that looks like this one for version 7 but it will just sit there for a day without ever loading the the app. No mouse, no windows. Just the brackground image.
What the problem might be for this system? Restoring to factory settings was the last resort and I am alarmed to see this is not working on this ~2 year old system.
My computer doesn't seem to start up anymore. It only enters the "Boot menu" tab with no further information. When I'm trying to press "Enter" it just returns back to same screen again. Is my harddrive broken? Is there some reset button available anywhere on the device?
View 2 Replies View RelatedI found a trojan that is attached to skype.exe. I have tried to start in safe mode pressing F8 on start up but I am not able to access safe mode start up. x201....3249-CTO....i7....4GB RAM....64-bit OS....Windows 7
View 9 Replies View RelatedI have a lenovo u410 with a 500gb hdd and a 24 gb cache. Now, I am experienced with hardware and software and have built/reinstalled a lot of computers before. This time it is a bit different. I did not get my windows 8 key with the computer only the OneKey recovery. I did do a backup with this program when the computer was new and I assume it is on the hdd.
So what I want to do is to replace the hdd with a new 2,5 in ssd and keep my windows 8 licence + all the lenovo goodness ( onekey feature, keyboard shortcuts etc..). What would be the best way of doing this? Can i transfer the backup I did to the new drive?