HP/Compaq :: V5000 Mobo
Jun 18, 2009
My mobo has been going bad. I've been slowly losing functionality. First, my multimedia card slots stopped working, then one usb port, then all usb ports and lastly my bluetooth module is working. I've concluded that I must have a bad mobo.
Is that the right assessment?
If it is and the mobo needs replacing which mobo do I use?
But let me be more specific, there are two types of mobos, a full-featured and a de-featured. I'm positive that i have the full-featured mobo but my problem is finding the right mobo with the right product number. I've searched online and the product numbers are all over the place. What's really confusing me is that I've found the same product numbers being used for both full-featured and de-featured mobos. So this makes it difficult to know which one to buy.
View 6 Replies
ADVERTISEMENT
May 21, 2009
what drivers do i use any modified drivers for my ati mobility 200m express, its a compaq v5000 series
View 5 Replies
View Related
May 14, 2010
i got a new laptop Compaq Presario V5015US Notebook PC, from a guy on craigslist.
I first noticed a problem when i tried to install windows xp and it stalled during initial setup when it says "setup is starting windows"
I've tried various cd's and other operating systems such as puppy linux and ubunta. They all seem to freeze up when they try to load.
I've ran hard drive and memory tests with various bootable cd rom disks, and tried various partitions and file systems.
I've switched and tested various compatable hardware components such as hard drives, ram, and cdroms.
I've tried various HAL selections while trying to install windows.
I've gutted the machine and booted it up on a piece of cardboard with only bare minimals for hardware.
I'm not 100% sure it's a hardware problem, because I have an older hard drive with windows 98 installed on it, and it loaded up and ran windows 98 perfectly.
View 9 Replies
View Related
Apr 19, 2010
I have a Compaq presario V5000 series with windows xp about 4 years old. It has been running fine on wireless for years until a few days ago. I was getting a code 10 but now it doesnt even appear in the device manager anymore. Also, I still get resource conflict screen at startup. If I hit F1 everything starts up as normally but no broadccom!
Heres what I did so far.
Destructive recovery
reinstalled windows
installed updated drivers for broadcom and bios.
defraged
changed wireless card
View 5 Replies
View Related
Jun 27, 2009
I have a laptop that crashed and I'm trying to take the steps to figure out what's exactly is wrong with her and how to fix her. I've talked with several computer repair people who have array of prices just to figure out what's wrong and another price to fix it plus parts and I just do not have that money. If anyone can help me out i would appreciate the help I'm trying to get it up and running before school starts.
I have a Compaq Presario V5000 (V5315WM)
Windows XP
On start up it goes to a black screen displaying NTLDR is missing Press Ctrl+Alt+Del to restart
Pressing Ctrl+Alt+Del it goes right back to NTLDR is missing
I've also ran a Primary HDD Self-test and within a few seconds the Test Status came up Fail
I'm not sure what that means as I've read that doesn't always necessarily means the hard drive is fried
Would a recovery disk help and if so are there any free ones to download off the computer?
View 6 Replies
View Related
Mar 19, 2010
I have a Compaq Presario V5000 that will not power up. Fans and drives don't spin up. The odd thing is it will charge the battery when hooked up to the power supply. The orange lightning bolt is solid until it is fully charged then it blinks. I have a second power supply and I get the same result.
The laptop does nothing when I remove the battery and try to run in directly on the power supply. I have re-seated the memory, hard drive, DVD drive, WiFi, keyboard, touchpad, monitor, audio board and replaced the power button board.
I also checked the power level going all the way to the processor and all is well.
View 3 Replies
View Related
May 19, 2009
I just replaced the motherboard in the girlfriend's HP/Compaq NX9105 (died in a wine spill...). The new mobo boots, but the first message was "unsupported wireless network device detected" and the system went no further. So I removed the card figuring a BIOS upgrade would sort that, but then I am faced with the message "this motherboard does not support 82W CPU", and again the system goes no further. I have checked the parts list and there only seems to be one mobo for this model, although there is one figure different on the part number:
Old mobo SPS-370495-001
New mobo: SPS-370496-001
The only other difference I could find was the new mobo only has one CPU fan header, easily sorted.
Other details;
CPU Athlon 64 1800 Skt 754
1.5GB DDR1 (though just using 256 stick for testing)
Bios Ver F11, newest available F34.
AFAIK the 1800 was the slowest CPU offered on this model except for some that had an Athlon XP-M fitted.
This may just be a BIOS upgrade issue, and I can certainly enter setup, but at the moment I cannot get it past the error messages, so any pertinent advice gratefully received.
View 6 Replies
View Related
Jan 15, 2009
I've got a DV6000 here that seems to have some sort of motherboard or HDD problem.
I load up an XP Pro installation and everything seems to work fine until it gets to "Setup is now loading Windows" at which point the installation just hangs. Native SATA is turned off. Tried it twice, too.
I've tried the installation with a Windows 7 Beta DVD as well, and the installation also hangs shortly after Windows finishes loading its files. I tried Windows 7 with native SATA turned on and off.
I'm not 100% sure that the HDD is ok as I don't have anything with which to test it, but the installation will get past this point in my E6400.
I'm not that familiar with HP computers, so I'm wondering if I'm missing something obvious or if there's a hardware problem.
View 9 Replies
View Related
Jan 27, 2010
i have a HP dv6 2154CA, it has a quad processor, 4g of ddr3 ram, 1 g nvidia 230 M and a 640gb 5400 rpm hdd
i just bought the comp and I wanted to buy a 7200 rpm HDD for the comp as rite now the hdd is the only bottleneck..
However I am unable to find out anything about the mother board of this particular comp and HP support says I can't install a 7200 rpm drive on this computer!
now i have seen plenty of dv6 comps on hp's site with a 7200 rpm drive but they have a diff cpu or the mobo is diff.
I just want to know if I can swap my hdd for a 7200 rpm drive? please help me, please let me know if there is any other info that is required.
View 4 Replies
View Related
Oct 6, 2009
Would like to get my ducks in a row as to doing this and see if there's some problems i don't know about or better ideas of how to go about it.
Hp Pavilion Dv6 - vista 32bit
1)Have a new mobo on its way,4650 GPU mobo,taking out a 4530 GPU mobo.
As i understand i install the mobo and reboot using the F11 key which will hopefully have the system recognise the new mobo ok & install vista 32 all back to system default OR let me create recovery disc's with the new mobo "tattoo" recognised to do the same.
Correct or not?
2) The FREE upgrade to Win7 cost's $39 to ship to South Africa + waiting time so i'm probably just going to buy a retail copy of Win 7 and install the 64bit version.
Installing that will no doubt reformat the HD removing whatever HP has put there so before i do that should i collect what win7 drivers i can and drop them on a usb drive prior or do you think win7 will be able to load enough drivers to allow me to download drivers once its installed?
3)Is there any things HP have got hidden on the HD that reformatting is going to cause an issue with?
I guessing the recovery partion will get wiped.
View 3 Replies
View Related
Nov 20, 2008
I'm thinking of modding my i9300 to accept a 1710 mobo-- if I buy a motherboard with integrated graphics, will I be able to add a graphics card later on and disable the integrated graphics through bios, or does integrated graphics preclude adding a card later on?
View 9 Replies
View Related
Jan 3, 2008
I think my xps9300gen2 might have some major promblems.
My battery went bad........got the bad battery flash code and the battery lights on back would light up funky.
I bought a new battery and the light isn't flashing anymore, system recognizes and charges it, BUT when I unplug the AC power to run on battery I get artifacts then system freeezes. I tried a third battery but it's the same deal. Won't run on the batteries
I fear it's the mobo.
Anyone delt with something like this?
View 11 Replies
View Related
Jul 2, 2009
I have the Dell XPS M1530 laptop, and of course the motherboard is fried.
The laptop is no longer covered by warranty, and I dont want to buy a new mobo from Dell, because they charge a ridiculous amount of money.
Where can I buy a new mobo with the new non-faulty Nvidia chip? I don't want to buy one of the original ones because it will just overheat from the chip and burn up again.
View 8 Replies
View Related
Feb 5, 2009
My M1330 has developed the "ac adapter type unrecognised" problem which means a new mobo. But it may be. It's an early m1330 with the 633MHz FSB and 2.2GHz cpu.
Do you think Dell will be able to replace like with like? I'm rather hoping they'll give me a 2.4GHz with 800MHz FSB as replacement as that's the nearest CPU match without giving me something inferior.
View 10 Replies
View Related
Jan 19, 2009
Well dell came out and once again replaced the mobo today... making this the 3rd time this computer needed servicing... and to my surprise while test driving it today (after the guy left), the computer shut down after reaching over 100c on the ACPI temps...
funny thing is, i didnt smell anything burn, there was no heat at all, and everything seemed fine...
i unseated the heatsink and tried it again, sure enouh the same thing happened. the fan maxes out as soon as i start the PC, when it loads windows...
then once i get there, it completely stops... i mean the fan blade arent turning .....
View 6 Replies
View Related
Apr 8, 2009
so my i6400 came orig with 2x512 ram sticks, one per slot -- recently (i have it it 2+ years) i realized that i was having a RAM issue (BSOD + other windows errors pointed directly to this problem) and ordered 2 x 1 gig sticks of ram from
newegg...when i realized what the problem was i pulled out 1 of the 512 sticks and it worked fine -- without a problem
i recieved the 2 new sticks and put them in, tried to start up, no luck...
tried one stick, worked fine.
(turned off)
tried other new stick, worked fine
(turned off)
replaced the original stick, worked fine.
(turned off)
replaced orig stick #1 with the stick that i thought had died/was bad, worked.
(also dealt with the dell POST? diagnostics -- flashing lock indicators -- which told me there was a problem with the RAM).....
View 5 Replies
View Related
Oct 21, 2008
My laptop wont turn on at all, no lights at all. The power supply is fine, and I opened it up and found a few burnt capacitors. Ive searched on ebay for Aspire 3680 mobo but all have different model numbers to mine. My model number is DA0ZR1MB06D1 REV.D. Also on the RAM socket it has another number which is MBAZL060017090E53B2505 and below that it has 31ZR1MB00I0. I cannot find one on ebay with the same numbers as above. Will it make a difference if I get one which has a few numbers/letters which are different to my current one?
View 8 Replies
View Related
Oct 8, 2009
I have a sz650n that will not boot -
Very little water made its way onto the keyboard, and probably leaked down and killed the motherboard. I bought a used motherboard from a semi-local store - same symptoms - few lights come on, fan comes on, no boot. Took motherboard and laptop back to the store, the guy said he tried 2-3 other motherboards, all with the same symptoms. It *is* possible all 3-4 boards he had are bad, but unlikely?
I'm pretty sure the power board is okay. He tried another CPU and memory, same symptoms.
I am looking for any advice you might have. I really need to get it fixed. I am still 99% sure its the motherboard, but the fact that all the ones he tried yielded the same results, maybe something else went out as well?
View 7 Replies
View Related
Nov 14, 2008
seeing as I'm getting ready for my 1330's second Mobo replacement, I've made a list of what to check after a mobo replacement. The first part of the checklist is what you really should test while the RegGuy's still on location and the second & third parts are what you need to verify (in most part) that the replacement mobo is indeed ok.
What the rep will check on your behalf is that the Notebook fires up and loads your OS. This of course implies that the power-on switch, monitor, hard drive, keyboard and trackpad are connected and that the main chips (cpu, graphics, chipset, audio, etc) are indeed functioning.
But that's about it so the rest is up to you ...
View 9 Replies
View Related
Mar 26, 2010
my m1330 is showing signs of gfx/mobo failure, but there is no real way to prove it to the techs.
Is there a way to call in and get my mobo replaced without forcing the failure? ...
View 6 Replies
View Related
Mar 1, 2009
I have an inspiron 9300 and a precision m90. my m90 has the t7200 and is vastly superior to the now aging 9300. the chasis are very similar and the mobos look exactly the same, dimension wise, minus one minor detail, the rear usb ports are farther apart on the m90 mobo, not by much but just enough to be irksome and cast doubt.
has anyone tried to upgrade the 9300 mobo and have they tried it with the m90 mobo? I can live w/o that pair of usb ports next to quadrupling the performance.
ulimately, I am trying to save the great monitor and in great condition 9300 chasis and upgrade the mobo/processor/ram.
what have you tried, learned, and/or recommend to get the 9300 upgraded to close to or better than the m90 with t7200?
View 12 Replies
View Related
Nov 27, 2009
try and source a mobo and cpu if they can be found at a reasonable price i fancy some core i7 action and the wait for the precision is taking its toll!
View 9 Replies
View Related
Jan 27, 2009
anyone familiar with taking apart a m1530? cause i got a new motherboard with a 8600gt and a new palmrest and i dont wanna open my laptop without having some knowledge about it...
View 8 Replies
View Related
Mar 26, 2010
Does anyone know what this brown spot is on my mbp's mobo? The same color is on a metal cover on a mounting hole on the mobo as well.
View 5 Replies
View Related
Feb 4, 2010
So I've just bought a second hand studio 1640 from ebay (t9600 + 4670), got myself a 130w power supply and am running throttle stop (otherwise any games I play start to stutter within 20 mins or so).
I have noticed that the laptop gets insanely hot very quickly, even with the laptop lifted up a cm above the table to increase the airflow its at 100c on motherboard and nearly the same on CPU within 15 mins of me playing mass effect. i was wandering if anybody has any suggestions on how to make it run cooler?
View 7 Replies
View Related
Oct 21, 2009
i bought a new lattitide 6500 from an outlet type place, it came fully loaded with more than it said in the specs, web cam etc
i had an issue and they replace the mobo, when the guy was replacing the board, i noticed it had a sim card slot with all hardware present.
View 4 Replies
View Related
Jun 18, 2009
As I took my Dell Studio 1555 apart to upgrade the cpu (not a job for the feint hearted!) I took some photo's of the mainboard and HS/Fan.
If any of you have noticed high temps in HWMonitor on one of the ACPI I have tracked it down to be related to the GPU. Well when you look at the Heatsink you will see why!
Thermal pad on GPU
Tiny heat sink with copper bar which sticks to the back of the fan assembly
Tiny noisy fan
View 10 Replies
View Related
Oct 21, 2007
I have an Inspiron 9300 that recently started having 100% CPU usage all of the time. After a lot of wild goose chases, the reason turns out to be that 3 out of 4 of its temperature sensors (CPU, Video, and soDimm) think that it is 255 degrees C inside the unit.
Error Code 3900-0626
Msg: Temperature Sensor out of range, temp=255C, min=10C, max=100C
As a result, the CPU steps down to preserve itself. I get perhaps 250MHz core speed rather than the 1.6 GHz the unit is rated for.
In any event, all other hardware diagnostics are fine, the machine runs ok (though very slow), and is otherwise healthy.
The Dell guys say that I need a new Motherboard, but I was wondering the following?
1) Whether the thermistors can be replaced by a shop that does motherboard repair
2) If getting an XPS Gen 2 mobo is worth a try. Would I still have to get new batteries, bios, etc if I planned to keep my existing graphics card? Can I do it without spending too much more money now that I would have to spend anyway on a stock mobo?
View 9 Replies
View Related
Nov 30, 2009
My 7950GTX failed and all replacement cards I've seen on Ebay, from the X1400, 7900GS or better are overpriced.
Since I won't be gaming with my laptop anymore, I was thinking of replacing my motherboard with the one with integrated onboard video, which is more cost effective.
Do you know if it fits, meaning will my current LCD connector fits this motherboard ? Should I expect a bad surprise?
View 4 Replies
View Related
Mar 25, 2013
My wife has an Inspiron Mini 10 which I damaged seeing if I could upgrade the RAM. So I bought another mobo and fitted it in, plugged it in and turned it on. After so long we were told that the battery was running low and wouldn't charge. After it shut down we got the OLOD and have tried using a USB drive to flash the BIOS using HP USB key utility but there wasn't enough power left in the battery to do anything.
Next I bought a new battery which has about 37% on it but we're still getting the OLOD after booting up and down a few times.
From what I can gather from searching the web, I need to flash the BIOS but I can't find a way of doing this as the BIOS files from Dell are .exe and isn't recognised when I boot from the USB stick as it's looking for a .bin file.
It has occurred to us that maybe the drivers (we have Win7 32bit installed) aren't there.
What we should do with the remaining battery power? We don't have enough to experiment.
1/ install drivers?... if so how do we do this without a floppy drive or disc drive?
2/Would a fresh install of Windows fix this problem?
View 3 Replies
View Related
