HP/Compaq :: Vista: CPU 100% On Every Boot (HP Pavilion Dv2200)
May 26, 2010
I've had my HP dv2200 notebook since Vista came out and yes I've had problems with it, but I've never had this one.
Since two days ago, every time I boot up, my CPU is running at 100%. This is from a full start-up or even out of hibernation mode. After 10-15 it dies down to 5-15% but occasionally goes back up to 100% even when idle.
Besides going to the usual sites I go to, I didn't download anything or visit any sites I'm not used to going to. There was a Windows Update I had in my task bar for several days that I finally installed, but it didn't require a restart.
My anti-virus software is avast! free version (latest version w/ definitions updated).
Under task manager there are two svshost.exe's that jump around from 30 to 50, and Firefox is at 50 or so when I try to run it (which takes 30 seconds to open during the 100% cpu). And when the CPU does die down to 5-15% it says that 'System Idle Process' is jumping up to 95 which doesn't add up.
purchased a Compaq 6735s notebook. It came with Vista installed, but he wanted XP as that is what he is familiar with. Also wanted to have Vista to become familiar with that os. I partitioned the drive changed the SATA setting to IDE in CMOS and installed XP Home on the drive. On reboot it now defaults to XP but doesn't recognize the Network Controlller and several other "unknown devices" Of course I am unableto connect to the internet to download new drivers etc. So my questions are: What information is necessary to diagnose this problem? Where can I find that? (and) How can I choose between OS's at startup and avoid device compatibility issues?
Trying to load XP on to the above mentioned machine. Getting BSOD within minutes of inserting the XP disc while drivers are still loading. Read through a huge thread on here about XP drivers but the seem to be talking about wanting to downgrade from Vista to XP.
Anyone know the procedure to dual boot instead of just downgrading?
my elitebook 8530w seems to boot up slow w/ 64 bit vista. i did a clean install and installed the drivers. Ex. it will say "please wait" for 20 seconds before going to the "welcome" screen. after "welcome" comes up..it does boot to the desktop very fast and is ready to go though. what is causing vista to hang like this at the welcome screen?
My specs 8GB(4gb x 2) ddr2-667mhz memory qx9300 quad core processor- this thing is a beast! vista x64
At first I thought perhaps the backlight went on it, but since then i've noticed a few other issues.
When I power on the laptop everything lights up and I can hear the DVD drive and HDD startup normally. But I get no HP splash screen and the monitor doesn't seem to power on either. Which I'm guessing means it's not posting, cause I even plugged it into an external monitor and it doesn't even pickup anything and goes to sleep mode.
After about 10-15 seconds it looks like the laptop reboots itself and starts up the DVD and HDD again but nothing...it just loops.
Is there something wrong with the motherboard ? I checked the monitor for a loose connection and the laptop in general for any internal loose connections and everything seemed fine.
My guess is the motherboard went and maybe the backlight at the same time...I have no idea...
I have a Pavilion dv7t laptop running Vista. One of the main reasons I bought this was to do audio work in Sony Acid Music and Sony Sound Forge. Well, lo and behold, I can't hear my mic input. I can record audio in using the mic input, but I can't monitor the input as I am using it to know whether it is too loud, too quiet, I am too close to the mic, too far away, etc.
I have done a lot of research on this via google searches and have found that most people solved this (on other laptops or other computers running Vista) by changing the input monitor setting (to enable it) within the windows registry. I dug all through various locations in my reg files and can't find anything on an HP Pavilion dv7t running Vista that corresponds with an input monitor setting.
This is a huge source of frustration. If anyone can let me know how to enable this, I would appreciate it. It's not a matter of right clicking on the speaker in the windows tray and changing anything on playback devices or recording devices. I have tried every possible combination of that and it doesn't work. This is something that needs to be fixed at a root level.
Why HP or Microsoft has this set as a default setting so you can't even monitor your input volume is beyond me.
any specific reason to that...cuz i had a single core processor and it would start vista faster but this is c2d and still slower than that at startup.....
It says "HP Pavilion dv9000" on the screen frame, and says "HP Pavilion dv9700" and "dv9750ep" on the labels in the back. Guess it makes it a HP Pavilion dv9750ep?
It has 2 Hard Disks, each of 150GB; I believe it's 2 physical disks and not just partitions as in the device manager shows 2 ... - WDC WD1600BEVS-60RST0 - WDC WD1600BEVS-60RST0
It came with Windows Vista Home Premium 32bit.
My issue is:
I'd like to try the beta of Windows 7, using the 2nd Hard Disk for that. I've been using it mainly for data backup, but as I have an external drive I guess I could make the 2nd dirsk free for trying Windows 7.
My reason for wanting to try Windows 7 is Microsoft Flight Simulator X. Some of my buddies tried it in Windows 7 and are reporting a noticeable performance increase.
When it comes to Laptops, and since this is my first one, I'm very reluctant to these moves - mainly because of the proprietary drivers... for instance, if I want to update my NVidia card drivers that must be made through HP and not through the regular channels - or so I think.
Questions:
Would it be possible to install Windows 7 on the 2nd Hard Disk and make it a Dual Boot system?
I know that the dv6000 is one of the worst laptops but I still tried to repair it and got a new motherboard.
Initial problem: fried motherboard.
Got a refurb one off ebay now my issues is as following:
Press the on power button, fan spins for 2 seconds and computer remains on with no boot posting. Hard drive light is OFF and I can't hear the harddrive but I don't think it is the hd because I should still be able to access the bios and monitor should still light on. screen doesn't display anything. cd drive works and when I put a cd such as a windows disc you will hear it work for a couple minutes.
I tried everything from resetting the power cycle, removed the memory, harddrive, connected an external monitor, changed the little battery inside the motherboard. all power cables and ribbons are connected. keyboard won't respond though (fn light wont light on and ctrl alt delete produces nothing) ! I hate HP. after opening the computer I realzied what a piece of junk.
A friend gave me his dv1000/ dv1515cl to fix, I believe it's the mobo but not sure .when I plug in ac adapter wont boot but light shows batt. charging .If I unplug ac, remove batt. then I reinstall batt. all tights come on but when I open laptop it shuts off.
is it possible to triple boot? because windows xp don't have all drivers yet so i need vista and windows 7 as backup till i collect all the drivers for my studio 1555.
I'm wanting to install XP on my Vista machine so I can play games better on it later on. What do I need to do other than get a copy of XP to make it work? Do I just install them both and then boot whatever one I like when the computer starts up?
I wanna dual boot Vista with XP. Will I have to reinstall Vista? Can the computer handle both in a dual boot? Also, what programs could I use for this?
Note- Vista has ability to manage and shrink partitions->Start->right click 'Computer"->manage->Disk Management->click drive (C)->shrink volume If you have XP or need to partition a space bigger than Vista will allow, follow this walkthrough with MEPIS:
Step One
download Simply MEPIS 3.3 here:
http://iso.linuxquestions.org/mepis/2
Step Two..
(requires DVD/CD burner -/+ R/RW) Burn it to CD/DVD as an ISO image Vista's Default burner does not include ISO imaging software, It can be downloaded here: 32-bit version 64-bit version
Step Three.. Boot from the CD drive, put Linux CD in drive and boot. It will run Simply MEPIS from the CD, but it will not install
Step Four.. Sign in as: root, password: root
Step Five.. Click on "Run QTParted"- that will open a box showing your partitions. The main Windows partition is usually /dev/hda1
Step Six.. Right click on your Windows partition, and choose RESIZE
Step Seven... In the box labeled FREE SIZE AFTER, type the size (in MB) that you want the new partition to be. That will create free space.
Step Eight.. Right click on the free space, click on create
Step Nine.. Select partition type (NTFS or FAT32), click OK
Step Ten.. Click on file(top left), then commit- changes will take effect
Step Eleven.. Click close, then click on the K in the lower left of screen and logout, restart computer Step Twelve..
remove CD and it will boot to windows, check your partitions. Insert Vista OS to install on new partition
Wife has a Dell Inspirion E1505 that keep freezing on the Vista boot screen. You know the one with the 3 yellow bars that just run across the screen right before you see you login name.
Well it just freezes and never gets past that screen. I walked her through reinstalling Vista over the phone and it boots from the cd and then loads all the drivers off of it and then goes to the Vista boot screen again and freezes..
My XPS1530 came with Vista 32 Home Premium when I bought it, since then I have received a Vista 64 Home Premium disc from Dell (for free). Right now I am running the 64bit version of Vista on the laptop
I have an Acer Aspire 8930G-7665, OEM Windows Vista x64. I want to set it up to dual boot between Vista and Windows 7, hence the thread title. However, I've had nothing but problems since the beginning.
Forgetting all the issues getting it partitioned, which I've done, I can't get the computer to boot off the DVD. This is strange because the same DVD worked fine on a Dell unit previously.
The first hurdle is that I can't get it to present me an option to boot from CD. The workaround is to change the boot order, which I've done. But now when it accesses the DVD drive to read the DVD there, the computer simply stops responding. There's a flashing cursor in the upper left corner of the screen.
I tried running gparted to partition my drive. in order to create a new partition for windows 7. upon opening gparted it showed only one hard drive and it's capacity was 298gb and labeled unallocated. It said if I want to partition it will wipe the whole disk. so I canceled in fear that it would wipe my c and d drives. I exited and rebooted my computer and now all i get is a black screen with a white flashing line in the top left corner. I did switch in the bios to boot from hdd back to first and I also took the cd out. Is there I way I can fix this without doing a Factory restore?
I have a Sony Vaio VGN-SZ483N with Windows Vista Business Edition SP1. For some reason, everytime i first boot up my laptop Vista will automatically restart with no error messages whatsoever.
I disabled the automatic restart option in vista and the same thing happens. However, once it's done the initial restart everything works normally and therefore i dont think it has anything to do with over-heating. I used to have windows xp pro sp3 and this did not happen
I have a new unibody Macbook Pro 15 inch and after playing with it for a month and having XP in parallel only, I decided to install Vista Ultimate through boot camp so that I'll be able to play games on my macbook. Now here's the problem...
After I load up the boot camp assistant and I proceed to install Windows, the laptop restarts and goes to the Vista installation screen. I set up the region codes and language that I prefer and I hit next. Now, I finally hit the big "Install Now" button in the middle. After clicking on this button though, I hit my error:
Required cd/dvd drive device driver is missing.
My dvd drive is the Matsua DVD-R UJ-868 My IDE controller is the 82801BA Ultra ATA Storage Controller 244B
Also, no, I do not have an external DVD drive and so loading up another CD with the drivers is out of the question.
My computer is out of warranty. On Thursday, my Dell Inspiron 1525 (bought in 2008) running Vista Operating System was working perfectly. No issues at all. On Friday morning, I went to turn on the computer and the 2 blue lights on the bottom left (the power and the one beside it) light up, the computer sounds like it is going to boot and then it beeps once and dies. It will continue to do this over and over every few seconds until I turn off the power manually.
I have tried the trick of taking out the battery and the cord, pressing the power button and then plugging the battery and cord back in, but it still did not work. The computer will not boot using just the cord (and not the battery) and vice versa.
I am planning to buy Dell XPX 1530 or HP DV4 1131tx for purely to run virtual machines. is there any possibility to make it dual boot with Windows server 2003 standard edition or Win XP 64 bit? If possible then what are features i won't be able use for above both notebooks.
If I buy the windows 7 upgrade (only $49!) do I have to upgrade my vista or can i keep vista and have windows 7 at the same time in a dual-boot situation? Does anyone know if this is allowed?
I just recieved my Sony Vaio FW490 today. After uninstalling the trial version of Office 2007 (student version), windows refuses to boot normally. I tried several system resores without success.
Although it said that the restore worked properly, I kept rebooting to repair windows or vaio restore center or something like that. I finally called Sony tech support, and they walked me through restoring the C drive to its original state option
I have a Dell Inspiron 1440 that won't boot now. Using WinVista Ultimate and needed to reboot but it hangs after the Dell logo/Inspiron screen with the white status bar is completed at the bottom of the LED screen. I removed the 500GB HD and inserted a new 1TB Win7 Professional that I've been working on for the last couple of weeks and it won't boot either. Same situation on both HD (2 Win OSes on same laptop with same issue). FYI, I have 8GB RAM in the laptop (been that way for couple of years) but I don't suspect the RAM as the issue. I do have 2-2GB RAM DIMMs that came with the laptop initially in case that's a test I need to make.
Functionally, it appears like the boot sector on the HD isn't "available" but I've tried two (2) different HDs and I get the same issue. Hence, I think it's not a HD issue.
What IS the issue and what are my options? Laptop appears to be fine otherwise. New motherboard? $$??
Pressing F2 or F12 doesn't get me anywhere at startup time either.
i created a new partition to dual boot vista ultimate 32bit and windows 7. After i restarted the computer Vista can no longer boot and the new partition does not show up.
