i installed a new copy of vista(ultimate) on my HP laptop.
what all drivers do i need to install?
i installed
graphics
audio
network
touch pad
quick launch
intel matrix store manager
intel flash cache logic chip driver
hp software update
hp active support library
besides these am i missing any important drivers that are need to be installed compulsarly?
I just got my new dv3 and want to to reformat the machine and install Vista afresh to get rid of all the bloatware. I've burned my recovery disks using the HP Recovery Manager. I've also read through the "Clean Vista Install with no activation" thread here.
My question is this: what happens after I install a fresh copy of Vista? Do I need to download all the required HP drivers? Where can I get some of the software that comes preloaded on the machine like HP Mediasmart and Wireless Assistant etc? Does anyone have a list of all the software that comes preinstalled on the dv3? I'd like to be able to get some things installed like mediasmart (and anything else that might actually be useful and is not junk).
Recently i was gifted with an r32 think pad and i want to install win 7ultimate instead win xp pro that are already running. I insert the win 7 installation cd but when procedure starts it requests drivers which i dont have....
View 2 Replies View Relatedmy computer can't "standby" or "hibernate" I can see that option but its disabled, what can I do?
I'm downloading some drivers right now like, my wireless card drivers, ethernet drivers and some others that were lost during the reinstall.
The drivers I'm missing are:
Ethernet Controller
Video controller
Video controller (VGA compatible) ....
I have a HP Dv2700 Cto Notebook with the following specifications
Intel Core 2 Duo 2.1 Ghz,
3 GB RAM,
250Gb Harddisk,
GeForce 8400 Graphics Card
OS - Windows Vista Home Premium
I had followed the Steps in notebookreview.com for "Clean install of Windows Vista" and installed Vista on my Laptop 6 months back and it worked perfectly fine.
Last week, i started facing issues with Vista and the system would automatically Hibernate.
The screen would go blank automatically even while its been used.
So, i decided to clean install Vista again.
I ran the Vista setup CD and using the Vista partition utility, formatted the Primary Parition c: (i have 3 paritions).
I started the setup and after copying 66% of the files. The system automatically shut itself down.
I Had to re-start the setup.
When i restarted the setup, the setup doesnt even start copying files. it shuts down during the initializing setup screen............
I got a Dell a few weeks ago and I didn't want to be left without all the right drivers etc so I just went with the install they put on it and took out all the bloatware.
Should I create a 2nd partition, and install a 2nd copy of Vista on that and then gradually migrate all the drivers and programs over to that side and then just eventually delete the first side?
Would that improve performance as well?
Then when Win 7 comes out I can just upgrade to that as well.
Anyway of knowing if I would get any conflicts or missing drivers or anything? Any problems you can think of?
Dell Studio 1555
My XPSM1330 got a serious trouble with the old Vista... Unluckily, I didn't have any image backup or recovery on it.. That's why I have to install a new Vista on my laptop... I got a full OEM Vista DVD which has been installed so many times on my desktop as well as my father's laptop.. No problems !!! But when I used it for my DELL... After the initial restart after installing updates... It cannot keep on the process.. Now the screen appears in black with Vista Boot Manager Error... I think the AHCI Drive is the main reason so I downloaded the new Intel Matrix Strorage with AHCI support on DELL.com and put it in USB and chose Load Driver in the installing page in Vista ... But nothing changed...!
View 10 Replies View RelatedMy Inspiron 1720 is currently down....
I swapped the primary bay 120GB 5400rpm that came with the DELL for a 7k200 200GB 7200RPM Hiatchi 16mb Cache Hard drive.
No bent pins, reseated twice.....
ALL DELL diagnostics pass.... but when I try to launch Hitachi's hard drive fitness tests/diagnostics it fails to load when detecting the bays.... give me an OLD DOS COMMAND.COM error.... this software with my 7k100 works perfect on Inspiron E1705.
BIOS is seeing hard drive... as 200GB... Vista sees the hard drive....
I can even do a FULL FORMAT (not quick) through Vista's advanced command prompt install and diagnostics.....
it formats successfull...
HOWEVER!.... when Vista gets to the final phase of its install when it is @ the VERY last step... I believe its called Finalizing the install.... it just sits there with the three ... and the dots are animated... so the install is not frozen, just doesn't go anywhere.
This install on my e1705 /w 7k200 and 7k100 takes like 10 minutes TOPS....
I've talked to DELL hardware and Dell Software On Call support (first 30 days free).... I've worked in IT since the early 90's and I must be missing something here.
I have problem with my Acer Aspire 8920G,
I got : Bootmgr is missing press Alt+ctrl for restart, tried few time but not working!
cause that i need windows vista ultimate oem installation cd for fix it / repair/ reinstall. when i bought it, unfortunately did not come with windosw vista installing cd, so anybody know solution and where i get it?
On my Dell Studio 1735 laptop I have been running with Vista Ultimate x32 since I got it - yes - the <gasp> factory load! Everything worked flawlessly under that factory load. I decided yesterday to install Vista Ultimate x64 after having downloaded all drivers from Dell's website that I needed (made sure to download the x64 specific drivers). After installing, all drivers went in normally, but, the fingerprint reader (even though it's recognized in the control panel and services for it are running) doesn't give me the option of using it to logon to Windows or into any websites or anything else. I tried removing and reinstalling the drivers - no change. There is no GUI to enable/disable it that I can find. I've gone through the Program Files folder that it's installed into but nothing showing as an executable.
View 9 Replies View RelatedAnyone managed to install SP2 final? I am getting error 0x80004005. I have original Vista Home on my 6935.
View 7 Replies View RelatedEverytime i try to install vista (from lots off different sources, even from acer dvd upgrade pack) on Acer Aspire 5112 WLMI I get blue screen error 0000008e . I have done some researching and found out that this is either wrong bios version or a problem with drivers. I flashed the bios (latest is 3.10, right?
Checked RAM and disk with programs.
Everything is fine.
I have a lot of stability issues with Factory Vista x64 installation, I will try to install from scratch Windows XP x64 and Windows Vista x64, I am not very familiar with Dell Notebooks (ex Lenovo guy), please could you tell me where I can find the correct installation sequence for all the drivers and tools?, I did some tests already, but I was not able to successfully install Dell Control Point, I got and error in the middle of the installation, I think I am doing something wrong, also I have installed the driver for UWB, but I do not find the tool to setup the Wireless USB hub?
View 9 Replies View Relatedi bought an acer aspire 8930G, with pre-installed vista (should be OEM) hp and a lot of useless additional software. the note is top, the thing i hate is the pre-installed os. now i want to run a clean vista installation.
reading in several forums about that, but not found the right way to do. so i have some questions.
1. is it possible to create vista installation disk (any kind of it) from data on hidden partition (or other data from the note)?
2. how the data for this disk has to look like?
i won't buy some extra disk, because i have already payed for it as buying licence!
for question nr 3 please check this...
Vista Clean Install on Acer 5520G
3. is it true what cappuchok wrote about bogus licence keys that not working with clean install?
This is a laptop without Recovery Discs, where the original drive partitions were erased and reformatted as 1 big partition. During Vista installation, it always reboots just as Vista is on the verge of "Completing Installation". So near and yet so far. The BIOS shows the hard drive as an IDE drive - even though this is clearly a SATA drive. Is this a driver problem? Do I need to load SATA drivers before having Vista go through the installation?
View 4 Replies View RelatedI just did a fresh install of Vista Home Premium 64 Bit following Orev's guide. I backed up the SWSetup folder and everything went fine except a couple of things:
1.) Quickplay. I don't have the QPW & HPQPDP folders in the SWSetup folder. Does quickplay still come with DV4T's or is HP using something new? Do I need to install some other program or driver from SWSetup to get quickplay to work? Should I not even worry about it and just another player?
2.) Recovery Partition. I followed a link in another post, here at NBR, to HP's site telling me how to add quickplay from the recovery partition of the hdd. I can see the recovery partition but when I try to access it, it says it's empty. Is it possible to access it through explorer or do I have to boot from it? When I did the fresh install, I just reformated partition 1, the one with vista on it already and did nothing to the recovery partition. Is this correct?
3.) Bluetooth. After I installed bluetooth and only after the internet connection is established, the icon pops up on the system tray even though I disabled it in the startup menu and told it in the bluetooth program itself not to display the icon. Also, when the computer first boots up, it tells me bluetooth couldn't connect because of a .dll file that is missing?
4.) Scroll Slider on Touchpad. I disabled alot of things in the startup menu and now the scroll slider doesn't work. Obviously it's because of the things I disabled, but why would disabling it from startup cause it not to work? The touchpad still works fine. I followed some things in this thread and everything here. Could any of this affect the scroll slider?
5.) Recovery Manager. What happened to the recovery manager that came factory installed? Is that in the SWSetup folder?
6.) Drivers. Should I follow this thread and update all the drivers since they are all new compared to what is in my SWSetup folder?
My new DV7t Quad should be coming on Friday. Right now it is stuck in China, but I was wondering. Would it be better to keep the Windows 7 that they have install on the computer, or should I do a clean install? Right now, I have Windows 7 Ultimate running my old laptop, however, I only the disk for the 32 bit. While my Quad will be a 64 bit.
So if it would be a benefit to do a clean install, could someone explain how to do it without having a new windows 7 disk. I did order the system restore disks from HP when I bought the computer.
Just purchased... haven't received yet.... rather than try and clean up the existing system... I plan on installing a fresh windows 7 OEM.
Are there any problems to expect that those who have preceded me could help with?
1. Do you recommend installing windows and then updating all current drivers from HP's site or get the latest available?
I've always enjoyed running drivers without bugs more than try to eek out a little more performance and put up with bugs. This computer is going to be far faster than anything I need anyway..... so I prefer stable bugless drivers!
I currently own a ZV6000 and I learned not to trust Microsofts drivers or even some of the manufacturers drivers for that matter as the one from the HP site are the only ones proven to be bugless... is that still the case with the dv8t?
2. Previously with XP I have done a total reinstall and found much better performance than trying to clean the existing bloatware.
I've read some folks can't tell the difference.
I"m feverishly reading as much as I can to offset any mistakes I'll regret.
3. Should I try and use my existing OEM serial number than came with my computer or is that considered used already?..... just thought if I could use it, I could save the OEM serial that comes with my new purchase of windows 7 OEM so I can install later on another computer.
I"ve technically paid for two licenses.... just don't know how that will all work and I really don't want to fuss with all the bloatware, easier for me to spend the cash.
I just want to get the system totally installed and up and running with no device manager errors and all working.. then I can worry about tweaking further.
one is on Microsoft ACPI-Compliant System and the other is on Intel(R) ICH9M LPC Interface Controller - 2919
what these are and where to get the drivers?
just picked up a new DV7-1270ca and did a clean install to Vista Ultimate 64B. I noticed that a few of the apps that were on the machine are missing and can't be downloaded? Can anyone tell me where to find these apps? I did make a set of recovery disks prior to deleting the recovery partition but they don't seem to contain files that are accessible unless one does a complete recovery...which kind of defeats the whole purpose of my intentions.
I notice that i don't have the control panel for my sound anymore. Not sure if this is related but i think since i can't individually configure my speakers without this application i notice some crackling sounds in movies i play which i am assuming to be because the subwoofer is set too high?
I am also missing complete functionality of the keys that reside directly above my keyboard. The keys work, but i notice i no longer see a visual screen confimation and get the clicking sound when i access them? The mute button should also turn amber when i mute the machine but it no longer does. I did check HP support but the only file they had was HP MediaSmart SmartMenu Update which is only an update according to the Readme. It states that i must first have HP MediaSmart SmartMenu installed for the update to work but HP does not supply a download link for this utility?
There are also a few other apps that i can't remember the name of that are missing i know.
Has anyone else done a clean installation?
I'm thinking about formating and installing fresh, I have read the Out-Of-Box guide. But I have a little doubt. After installing OS, which drivers do I need to install. I mean, like there are two drivers available under Graphics for my laptop(HP dv6-1387tx). Similarly, for other categories like Network, there are more than one drivers listed. Which one should I choose? Should I install all under the categories. Since, I selected the exact model, all should be applicable to my laptop. Here's the link to all drivers and softwares -
[url]
anyone have any luck installing XP on DV6?
View 3 Replies View RelatedI just got my Envy 15, and opened up the package, the Windows recovery DVD or any other software installation disk was no where to be found. Nor was I prompted at startup to make a fresh recovery DVD from a blank. I havne't bought HP for a number of years, mostly stuff from Lenovo, Dell and smaller OEMs, each of them contained the disks or the instruction to make them.
How does the process with HP work? Is ordering new disks from HP the only way that I can wipe the HDD clean and start from scratch?
I got a brand new hp envy beats and I tried to do a clean install with these drivers from HP.com
- IDT High Definition Audio CODEC Driver
- Intel Chipset Driver
- ATI Mobility Radeon HD Series Video/Graphics Driver
- HP Quick Launch Buttons
- Synaptics Touchpad Driver
(I didn't install the rest because I think those aren't neccessary)
Software & Driver Downloads - HP Customer Care (United States - English)...
HP Envy 15-1055se Beats Limited Edition Notebook PC
After the installation, all the fn key (increasing/decreasing volume/brightness, web, mail, calc, fn b for beats audio) works well. But I can not see the on screen display (volume indicator or beats logo...) like before.
how to slipstream sata drivers onto Windows XP installation disk I decided to try it out. I had two unsuccessful attempts and I'm wondering that it probably is due to me using the wrong drivers for the job.
I have a Dv5t 1135ee, can anybody please direct me to the right drivers that I need to put onto my Windows XP installtion disk to not get a BSoD.
I just got a HDX 9200 last week and all this time I've been fiddling with tweaking the original HP image, installing clean Vista OSes (like twenty times by now), trying different drivers, running drivers-update scammers (like DriverDetective, RadarSync, etc.) just to look at the newest version number of the drivers, then crawling the web to manually find and try them, and so, and so on.
Of course, in the need of having a clean Windows Vista installation (since the HP image has a lot of crap, slowdowns, outdated drivers, not SP1 slipstreamed, etc.) I had to start from scratch.
After installing the clean Vista setup and all the drivers, I found that the QuickLaunch buttons were given me problems. What happened is, at the end, that everyone of them works BUT the TV button. I'm running on the QuickLaunch Buttons drivers 6.40, also QuickTouch installed for OSD, and QuickPlay 3.7 (updated from CyberLink) and still, when touching the TV button, nothing happens. Not even a click is hear like with the others. The strangest thing is that, if I turn the computer on by pressing the TV button instead of the power, it boots... and then it opens the TV module in the QuickPlay app.! Just as it should!................
Just did a fresh install of XP on my bootcamp partition. And I can't gat any drivers to work correctly with the 9600m GT. Tried several drivers from Laptopvideo2go.com, but they keep reverting to a basic VGA res and color depth. It will not let me adjust any settings.
It says sothing about the currently installed graphics drivers was written for a previous windows installation, so teh default VGA driver will be used.
If anyone has any info to help a guy out here it would be greatly appreciated.
I never experienced any issues like this on either Vista x64 or Win7 X84/64.
If you are thinking about formatting and re-installing the OS, and setting up new partitions, use GParted. It is a free and very easy to use program. I couldn't believe how easily it worked sparing me the $40-$60 that a good partition program uses. I just thought I would give these guys some free press since they do all that work for free.
View 9 Replies View Relatedi decided to do a long over due fresh install of windows 7 to get rid of the nonessential progs that were there for no reason. However, i have run into a lil snag. Some things are missing from my new baby and i can't figure out where i went wrong.
1. My touch pad can pinch zoom but use other multitouch functions like 2 finger scrolling
2. When i adjust the volumn and brightness the indicators no longer show up on screen
3. The eject media button for my cd drive no longer works
I have just received my upgrade for my VGN-Z21WN/B (my baby, love it!)... anyway, I did a bit of research before receiving it and everywhere I read suggested to do a fresh install - so thats' what I did. It actually all went okay, and it's happily running.
I visited vaio-link.com where I found some Win7 drivers, including:
- Bluetooth driver
- Realtek HD audio
- BIOS update for Win7
- Ethernet Driver
- Fingerprint suite
- Wireless LAN (Intel ProSet)
- WWAN
- nVidia graphics driver
All great , except now I am missing my FN keys. The FN keys for brightness, volume, switching display etc no longer work, and I cannot find a solution. One site I researched says to download the vista driver, but I cannot find that anywhere .. and then even people said that didn't work.
Secondly, although not a biggie, is there a VAIO Update driver?