I recently changed my os to win7, but now some devices are not working(finger print scanner, webcam). i searched a lot for their drivers, but i'm tired.... i want quickplay driver also(hp pavillion dv2000)
A friend of mine has the dv2000 pavilion laptop with vista installed. He decided to uninstall vista and install xp 64bit. The problem now is that I cannot find the vga or audio drivers anywhere
Some spec: AMD Turion 64 x 2 TL-58, 1.9 GHz, 1.93 Gb Ram, Windows XP Home Edition SP2
I have a HP DV2000 and recently it would not boot up. It gets to the windows screen and then rebots itself. Upon trying to reinstall the windows OS I got into the bios to see that the hard drive can't be detected.
problem can be my hard drive or my motherboard. The computer is out of warranty and my question is how can I be able to diagnose the what the exact problem is? Should I just buy a new hard drive and try that or is there anything I can do in the bios to further diagnose the problem??
Error message 1720-S.M.A.R.T Hard drive detects imminent failure Please backip the contents of the hard drive and run HDD self test in f10
I am having a problem with wireless network, the signal is very weak even the laptop is next to wireless router.
If I move my laptop 5 meter away from wireless router then my laptop could not detect any wireless network. I have updated wireless driver and update the bios.. no luck!
My Wireless card is: 414376-002 (Broadcom 802.11b/g Mini-PCI Express Card)
There is only one thin cable connected to wireless Mini-PCI Express Card.. is that normal?
Last week out of nowhere i noticed some banding on my display. It would be really bad all of a sudden for a few seconds and then disappear for a few mins. It had not been dropped or mishandled at all. 2 days later the display completely went black (but the backlight was still on). I have been doing research about what the problem is and have read alot about how HP had a bunch of notebooks with bad motherboards and GPU's that had to be replaced. My computer still works fine - just with no display. When hooked up to an external display it work no problem. And the original display will flash on occasionally as well.
My question is: Do I have the same problem as mentioned above with the bad motherboard?
Or is it just a display problem (that can hopefully be fixed with a quick display replacement?
When I click on left button (touch pad) on the laptop, it is not responding but I have to press it quite hard then it will response. it is really annoying..
I have an HP-dv2000 laptop hard-drive that's completely crashed now.
I have a Dell XPS laptop 320gig Sata Hard drive that I am trying to replace it with, however when I plug the hard drive in and try to turn on the power. All that happens is all the lights on the laptop just blink really fast, along with the multimedia quick buttons, continuously.
If I remove the hard-drive and it will actually go away and start, it will start up the HP screen thats it.
i have a hp dv2000 series laptop a friend wanted me to look @ to see if I can fix it. He's willing to selling it to me real cheap ($50). The problem is as soon as you plug it in the laptop turns on. You see lights come on but monitor does not come on and you can see the fan turn on for a second then stops. This happens every time it turns on. He says it everything was turning on yesterday.
I've had my HP DV2000 for about a year. Recently I started having this problem. I would boot it up and the screen would be distorted like the image below. Sometimes it freezes and other times it just stays like that. I've ran MemTest to test the memory and that came out fine. I've also formatted it and started from scratch and it remains the same.
I have been given a laptop to fix.hp pavilion dv2000 when i turn it on the power comes on. But the screen remains black. I have no idea what the problem is as of yet.. Don't know if its screen issues or hardware issues i dont get any beeps or anything. I took out the ram used one stick no luck. So i open it up a bit the power strip bar with the LED the wire was cut. So that was getting no power. All wires for the screen/mirco webcam were plugged in. Not sure what the problem is I pluged in VGA monitor it doesnt turn on ? Any idea why i hit fn f4 nothing is happening? How do i get alt monitor show whats going on screen?...
Went to turn on the laptop and walked away. A minute or two later come back and laptop is not past the BIOS, and a screen talking about a laptop being ran until the battery drained last time it was on. I didn't get a chance to finish reading the screen because the laptop restarted. Nothing shows up on the screen after the restart. I was running off the AC adapter when this happened.
Situation now is pressing the power button causes the power button, media quick play bar. Power notification light , light above mouse pad and the wireless slider to light up. If the AC adapter is plugged in the charge light will light as well. I also hear a fan and i think the HDD. The HDD light doesn't light though. Nothing will show on the screen. stays black. I have tried powering it with AC adapter only, charged battery only, and with a charged battery and AC adapter.
I am having problems getting 3 drivers loaded on an E4300 in windows 7. The chipset drivers says "This computer does not meet the minimum requirements for installing the software"
Does anyone have the catalyst 10.3a preview drivers? I didn't back them up but I remember having way better performance(on my sxps 1645) and overclock performance from it ..
The LCD on my DV2000 broke last month and since I dont have the money to replaced right away I decided to use it with my 17" lcd monitor for the mean time. After a few days of using it with the external monitor one day I turn it on and got nothing on my external monitor. Since then I having trying to figure out why I am not getting video signal through my VGA or s video.
Now I am afraid there is something worst than just the broken lcd so I am trying to see if there any way I can test it or find out if it still works before I get the replacement LCD. I at least know the there is signal going to the broken lcd since when it turns on the screens light up and turns white.
Is it possible to use a different size lcd from another hp? I have 15.4 lcd from my sister's old compaq will the dv2000 mother board run a bigger screen or will it kill the motherboard?
Like many others who use this series, I was faced with a dead HP laptop 3 weeks ago, giving nothing but a blank screen and 3 beeps (1 long, 2 short).
It turned out that almost all models under this series had this same problem due to the NVidia graphic card that overheated the mainboard So I sent mine in for repair at the HP service center and just got it back a few days ago.
I was just wondering if there is any way at all that I can prevent the new mainboard from overheating like this again? I would like to my notebook to live as long as possible from now on.
I checked the temperature just now and it was at 75C. It said the threshold was at 105C...
I've read the sticky and many threads here but I'm confused. What is the symptons of the backlight/inverter problems?
My DV2000, when power off the monitor is dark, when power on, the monitor lit/iluminated. But nothing on the screen. The harddrive led blinks so it's accessing.
I thought it was inverter so I replaced it with the $8+ from y'allstore. It didn't work.
somehow the wifi switch on my hp dv2000 broke. i dont know how it happened, but it doesnt matter now as i cant use the internet because it is in off mode. i tried enabling it on device manager, but with no luck since i think its because it is still in the off position, and w/o the switch itself i cant manually switch back to the on posistion... anyone know how i can replace the switch? is it sold by hp, ebay, online retailer? is it an easy fix? and most importantly is it expensive? some crappy pics taken from my phone show the problem...
Has anyone installed Windows 7 x 64 on your VGN-z540 laptop? I tried nvidia's web site, guru3d, sony etc. but I can't can't find drivers that Windows 7 will accept on my 540 laptop. Every other piece of hardware works including the intel video it natively detected. I can't seem to get it to recognize the nvidia driver. The driver won't install from setup. I can manually try to force it by selecting the device, update drivers, select manually but it says it wasn't the right driver even though it is the 64 bit driver for nvidia and it has the 9300m GS listed many many times in the list.
Now that I've got a F series here's a new thread with tested and working drivers and utils for a clean install. The SZ and AW drivers threads are still going strong with 1500+ and 500+ downloads respectively.
Drivers and Utilites are from US & EU VAIO Support. All drivers have been extracted to bypass the model version check.
How to Install
To install extract the archive to a folder, e.g C:drivers.Open Device Manager and right click through each device selecting "Update Driver Software". See pic Install_Step_1.jpgSelect "Browse my computer for driver software". See pic Install_Step_2.jpgBrowse to C:Drivers and make sure "Include subfolders" is checked and click Next. See pic Install_Step_3.jpg
If an updated driver is found it will be installed. Don't worry if an updated driver isn't found. Some devices don't need updates.....................
Driver and Utilites below are from VAIO FTP, US/EU VAIO Support and Intel Download Center. VAIO don't always post the same versions on their EU and US sites and new drivers aren't listed for older models even though they are compatiable. Sony are also slow to make the latest Intel drivers available. All drivers have been extracted to bypass the model version check, usually found on drivers from the US site.
How to Install
Most of the folders only contain the driver and *.inf files. I prefer to install drivers this way to prevent the installation of software I'll never use.
To install extract the archive to a folder, e.g C:drivers.Open Device Manager and right click through each device selecting "Update Driver Software". See pic Install_Step_1.jpgSelect "Browse my computer for driver software". See pic Install_Step_2.jpgBrowse to C:Drivers and make sure "Include subfolders" is checked and click Next. See pic Install_Step_3.jpg
If an updated driver is found it will be installed. Don't worry if an updated driver isn't found. Some devices don't need updates.
I have a sony z46gd with vista business 64bit edition.
i wanted to install win 7 so i created a new partition with the freespace and sucessfully managed to install win7 on the new partition
But now I'm trying to install the drivers from the europe sony site as pointed out in another thread , but sadly. ikeep getting the battery is not compatible error pointed in this thread
I suspect that the drivers i installed are for win7 business and not win7 ultimate
where do u find the win7 ultimate drivers for this sony vaio ?
I bought a DV2000 with a failed motherboard. I tried reflowing it once and it didnt work. I will more than likely be replacing the mobo after I try reflowing once more.
It currently has a gforce 6150 igp with an athlon tk53. I am wanting to get a mobo with the best graphix solution possible. So far, the best I have found is a gforce 7150 board. I know there are intel setups with gforce 8200 but I would prefer to stick with amd, although an intel board is not completely out of the question.
So, if you know what the best graphix solution is, let me know! Post up the exact model number so that I can get a mobo part number. Or, just post what you got if its better than a 7150 gforce!
I've recently formatted my hard drive and put my own copy of Win7 on my Thinkpad Edge 14 (0579-A62). There's no more recovery partition. After being surprised that Win7 didn't have any built in drivers for the display or WiFi, I plugged an ethernet cable in and went to the Lenovo support site. I tried all of the Networking: WLAN drivers but none of them let wireless work. I installed the Intel PROSet software and it just says "Driver is not installed" so I'm assuming it doesn't have anything to do with the WiFi key on the keyboard.
I bought a HP laptop - pavilion 17-f008sr Energy star (G7Y08EA). There was a Windows 8 operating system installed. To work on that laptop, I had installed a Windows 7 OS (64bit).
Than I started a system, I saw a problem with my USB in Device Manager (universal serial bus usb controller and Sm bus controller). As a result USB 2.0 and USB 3.0 didn't work. I spent a lot of time to find different drivers to try solve that problem, but I still have it. Intel usb drivers and and much similary drivers not working with my laptop or did not installing because I have not right system for much of drivers that I found.
what is the max RAM it can handle, second, how do i convince 3 little sisters they need to remove the dust bunnies from the inside of their laptop? (dv2000)