Lenovo 11e E/Edge 14 :: WiFi Drivers On A Fresh Win7 Install?
Aug 29, 2012
I've recently formatted my hard drive and put my own copy of Win7 on my Thinkpad Edge 14 (0579-A62). There's no more recovery partition. After being surprised that Win7 didn't have any built in drivers for the display or WiFi, I plugged an ethernet cable in and went to the Lenovo support site. I tried all of the Networking: WLAN drivers but none of them let wireless work. I installed the Intel PROSet software and it just says "Driver is not installed" so I'm assuming it doesn't have anything to do with the WiFi key on the keyboard.
View 6 Replies
ADVERTISEMENT
Jan 11, 2013
I fresh installed Windows 7 and installed all the drivers from Lenovo's website. Still I cannot adjust the brightness. It stays on MAX and drains the battery in 1h30min. All other F hotkeys work but not F7 & F8 for brightness control. Is this a BIOS/Drivers issue?
ThinkPad Edge E535
Model: 3260-CTO
AMD A10 4600m apu
Windows 7 64 Home Premium
New just turned on a few hours ago. Brightness control was working before fresh install. Did fresh install to get rid of bloatware.
View 5 Replies
View Related
Feb 4, 2010
I have a fresh copy of win 7 ultimate (legit of course.. got it from a microsoft event).
I have seen a few threads about clean installing vaios (boy do they put a bit of crapware there...) but not sure whats best to do..
I dont think I need/want any of the free apps (are there any good ones?) so I reckon I am going to blast the harddrive (I imaged the whole lot with another backup prog)
Whats the best strategy for this? i.e. whats best for getting drivers etc?
I noticed some files in c:windowsdrivers (an exe and a inf diretory, not sure which is for which) should that contain all I need?
Will I have issues with sony system stuff?
Also what about registering it? I guess there will be no issue as far as warranty is concerned (as said, it is a proper legit win 7)
View 4 Replies
View Related
Aug 25, 2014
OS: Win7 64Bit
Product : b0p18pa#ab4
Model: dv6-7007tx
GPU: Nvidia Geforce GT 630m
On fresh install of W7 I have 2 instances of "standard VGA graphics adapter" one that is "installed correctly" (IDs below):
PCIVEN_8086&DEV_0166&SUBSYS_181B103C&REV_09PCIVEN_8086&DEV_0166&SUBSYS_181B103CPCIVEN_8086
&DEV_0166&CC_030000PCIVEN_8086&DEV_0166&CC_0300
One that is showing as an error:
PCIVEN_10DE&DEV_0DE9&SUBSYS_181B103C&REV_A1PCIVEN_10DE&DEV_0DE9&SUBSYS_181B103CPCIVEN_10DE
&DEV_0DE9&CC_030000PCIVEN_10DE&DEV_0DE9&CC_0300
After trying multiple times (both automatically and manually) to install the Nvidia drivers it shows an error saying "you must install an Intel driver first". I realize this is the HP forum, but i've tried contacting Intel with no luck on top of trying every Intel driver that looks even remotely relevant. (most of which error while installing mentioning my computer lacks the requirements for the install).
I've tried updating the drivers automatically through windows on top of disable/uninstall and restart, but the same problem keeps arising.
View 3 Replies
View Related
Jun 19, 2012
I have 3 thinkpads that after a fresh reload are unable to connect to wireless networks. I have gone through and installed the different wireless drivers on the lenovo support website.I have gone through several steps of similar problems others have had but it hasn't made a difference.
I have installed:
-HotKeys & patch
-Power manager & driver
-Chipset
The realtek network -ethernet adapter and communications LAN driver.I have installed and removed each wireless adapter available
Thinkpad Edge 15
Type: 0319-46U
On a side note in the Device manager screen there is a "Network Controller" alert saying no driver installed for this device. I have determined it is some Realtek device but beyond that I am lost.
View 8 Replies
View Related
Nov 12, 2013
Why a fresh vanilla install of windows 8.1 pro would keep waking up from standby? Which even viewer can I look at to figure this out?
View 5 Replies
View Related
Mar 30, 2013
I just did a system restore of windows 8 (clean wipe) and went through the process of reinstalling all the drivers. I installed the latest version SmartAudio (8.32.43.0). In Google hang out it said the microphone wasn't working, then I clicked on the settings and made the internal mic the default, I got good mic for 1 second. Did it again and the same thing. But this is only for a single second. In skype I tried the same thing and it is just super quite, it doesn't register on the scale unless I blow directly into the mic (so I know it's picking something up). Last week I had my upgraded from win 7 Windows 8 install working just fine with the microphone (zero problems ever before with this thing). I checked in mic properties and DB and volume are set to max. So what is it about the fresh install that is making the mic all cracked out? (I checked the SmartAudio settings too) I'm having issues with my Bluetooth mouse too(disconnects at restart and have to reinstall) and Power Manager (it doesn't show up as a toolbar anymore). P.S.. I've gone to the X220 site and downloaded the latest drivers and installed system update.
View 1 Replies
View Related
Aug 16, 2012
After some virus problems I set up my system from the scratch, formatting the hard drive and reinstalling Windows. I also downloaded the Lenovo System Updater, installed all updates and downloaded the ThinkVantage Solution Center. Now, the PC works again BUT the WiFi adapter does not work. It seems to be non-existent, if I press F9 it says I am suppossed to press the hardware switch. I have a ThinkPad Edge 15, it does not have such a switch at all.
In the hardware manager i find one network device without driver, so I suppose this is it. However, no driver seems to work. I downloaded the WiFi dirver(s) from the Lenovo website and installed them, nothing happens. What can I do?
Here are my specifications:
-Thinkpad Edge 15
-Windows 7 Home Premium (OEM)
- the driver I installed which did not work: Intel Wireless LAN (bg, abg, abgn) for Windows 7 (32-bit, 64-bit), XP - ThinkPad
I am pretty certain that the hardware works, before I set uo the system WiFi was not at all a problem.
View 9 Replies
View Related
Jul 6, 2008
I am trying to connect my E520 to a wireless router. The router isn't connected to a modem, it will just be used so I can transfer files between two wireless devices. The wifi router is functioning properly as I can cannect to it with the wifi on my phone. However my laptop doesn't even see any wifi networks to connect to. The wirless "radio" button (F9) is on.
What happens.....
- There us is no visible wifi network.
- I can connect and access the router and its settings using the ethernet cable.
- 1st method - When I go to "Network and Sharing Center" I select "Setup a new connection or network". From the box that appears I select "Setup a new connection". The next box asks me to choose a wireless router from the list and informs me it may take up to 90sec for a router to show up. However no routers show up at all even after 30min.
-2nd method - I go to "Network and Sharing Center" I select "Setup a new connection or network". From the box that appears I this time select "Manually connect to a wireless network". Thsi time I get a box with an error "An unexpected error occured". It doesn't give any more information than this and I have looked in the logs and though I don't know what I am looking for nothing jumps out.
-3rd method - I go to "Manage wireless networks" and click on the "add" button. The box that appears asks me to choose between "Manually create a network profile" or "create an ad hoc network". Choosing either of these reslts in the same "unexpected error" with no information.
Things I have tried:
- Uninstalled the wireless card drivers and installed the latest ones. (device manager says device is working properly).
- let windows try and update the driver.
- Turned off my firewall and internet security and tried again.
- Disabled power management for the wireless card.
- Physically checked the card in the base of the laptop - all seems ok.
Win7 64bit Home Premium
Zonelalarm Extreme
D-link DIR_600 wifi router.
View 7 Replies
View Related
Feb 4, 2014
After i uninstalled Lenovo's Access Connection SW my WIFI does not work anymore.
1. My laptop does not see any WIF newtork (even though available)
2. In the mobility center there is no WIFI option (to switch on/of)
Link to picture
3. In device manager all is fine (I even reinstalled the driver several time)
Link to picture
4. If I use the Intel diagnosis tool fails the hardware test
5. using the FN F9 key, i have the information that WIFI is on
6. wifi is enabled in BIOS
7. in the Network connections. WIFI adapter shows enabled and on properties says that is working properly
Link to picture
Unfortunately i do not have a previous restore point. I reinstalled Lenovo's Access Connections but did not work.
View 2 Replies
View Related
Nov 14, 2009
I have just received my upgrade for my VGN-Z21WN/B (my baby, love it!)... anyway, I did a bit of research before receiving it and everywhere I read suggested to do a fresh install - so thats' what I did. It actually all went okay, and it's happily running.
I visited vaio-link.com where I found some Win7 drivers, including:
- Bluetooth driver
- Realtek HD audio
- BIOS update for Win7
- Ethernet Driver
- Fingerprint suite
- Wireless LAN (Intel ProSet)
- WWAN
- nVidia graphics driver
All great , except now I am missing my FN keys. The FN keys for brightness, volume, switching display etc no longer work, and I cannot find a solution. One site I researched says to download the vista driver, but I cannot find that anywhere .. and then even people said that didn't work.
Secondly, although not a biggie, is there a VAIO Update driver?
View 10 Replies
View Related
Aug 14, 2012
I updated my Thinkpad with windows 8.1. But the wifi driver doesn't work correctly. After the installation the device was diasabled with code 10. I searched for a new driver and found one from Realtek for win 8. After this installation and the reboot, the wifi works fine. Restarting the notebook again, the device was disabled again. I tried a lot of different drivers - it's always the same: After the first installation and reboot it works, after the second boot, the device is disabled again.
View 2 Replies
View Related
Nov 5, 2013
After I reinstalled windows 7 I can't recover factory settings and drivers (going threw F11 as mention in many support sites). Also I can't download Wifi (wirelees lan driver). It shows that it can't be done on this computer becouse it doens't support this operating system or that it doesn't have wife device at all. I downloaded Lan driver from support and it works, but its diffrent story with wifi. Driver genius can't find it either. Also tried using rescue and restore, but it doesn't find any back up's. Even do there still a partition LENOVO_RECOVERY. So I need to know that I am doing wrong, did installed wrong OS(even do I tried two diffrent setups) or I just do something wrong then I try to restore fatory settings or I just f.
View 1 Replies
View Related
Apr 20, 2013
Every time I try to reinstall the wifi driver for my Inspiron 15 3521 (driver for Dell wireless 1704 version 10.0.0.200) the install fails with a not very useful error message.
View 1 Replies
View Related
Nov 8, 2014
There are two variants of drivers :
Dell Wireless 1704 WiFi + Bluetooth Driver and
Dell Wireless 1705 WiFi + Bluetooth Driver
the 1704 installs ok but the 1705 reports an error and doesn't install at all. Normally should they install both? Each of them does a different thing ? Why are there two drivers for same thing?
View 3 Replies
View Related
Feb 9, 2013
I have a Lenovo Edge 330 (E330), with win 7 pro pre-installed. I'm annoyed by all the software that's installed together with the laptop, and I'd rather want the laptop with a clean install of Win 7. I have a Win 7 Enterprise, but not a Pro. If I attempt to install Win 7 Ent., would this cause any trouble? Drivers for all hardware seems to be available from the support site, that shouldn't cause any problem.
View 9 Replies
View Related
Apr 13, 2014
I replaced hard drive with SSD and installed windows 7 ultimate (X64) on my HP Pavilion G4 notebook. However, I am not able to install switchable graphics on my laptop now.
I have tried this
1. Installed HPSA and ran update and tuneup. It asked me to update "AMD High-Definition Graphics Driver" but it failed with multiple retries and after some time now it doesnt ask to do this update at all. Now everything is green in HPSA but I am still not able to switch the graphics
2. Tried to download from HP drivers page but it says "AMD Catalyst Mobility cannot be downloaded due to incompatible harware/software on your computer"
3. Tried uninstalling the driver but windows updates the drivers automatically.
4. I also updated BIOS as suggested at [URL] ..... but still no luck......
Product Name: HP Pavilion g4 Notebook PC
Operating System: Windows 7 Ultimate 64-bit Service Pack 1
Product number : LQ375PA#AB
View 1 Replies
View Related
Dec 1, 2012
My Y580 should be arriving shortly. I got it on the Black Friday Special and it comes with Windows 8. I bought a SSD to replace the HDD and I am wanting to downgrade it to a fresh install of Windows 7 Ultimate or Pro and I have a couple questions:
How to do this for the Y580? I have not been able to locate one.
Also I am assuming I would not want to use the Windows 8 device drivers correct? Do I use the Windows 7 device drivers?
Would use the drivers from the Lenovo site or each devices specific website? I am going to try to save them on a DVD in advance and want to be prepared.
View 9 Replies
View Related
Dec 20, 2013
I've problem with my notebook. After clean installation of win7 64bit, installation of all drivers with lenovo update and windows update is the hibernation option behaving in strange way.
The screen turns black but the computer is still working and when I start moving with mouse it shows me the login screen. So basically it just logs me off.
I tried to instal newest drivers of Chipset, Graphical card, Bios.... the option in cmd: powercfg -h is turned on... nothing worked. I also updated powr manager soft and driver.
View 1 Replies
View Related
Feb 16, 2012
I just bought a used Red E520-1143CTO in brand new condition, from someone who screwed up the OS (It had Windows 7 Home Prem 64). A lot of the drivers were missing and not working correctly. The restore partition is still there when I look in My Computer but when i reboot and press F11, I never get the option to access it. There was no Lenovo software installed to create a repair disk and of course, it didn't come with any software. Is there a way to access it?
I also have access to another E520 that is almost exactly the same (It just has the older i3 processor). I tried to create a repair disk from it and use it on this computer but it says the Windows versions are not compatible or the Repair software is not compatible with this version.
So I'm trying to figure out if there is an alternative way to access this restore partition. I've installed a company version of Windows 7 Enterprise 32-bit on this machine and I've got most of the drivers installed and it appears to be working fine. But I have three that have yellow exclaimation points:
1) Base System Device
2) SM Bus Controller
3) Unknown Device
I've been downloaded drivers from this site, but I can't can't figure out which drivers I need to clear this list. So, how to get it restored to factory default. If not, I'd like to know what drivers I need to clear this list. I want it to look like brand new because I was going to give it to someone as a gift. I just don't see the on screen prompts for the wifi button (doens't work), volume, and brightness like the other machine. I'd like to get all that working.
View 3 Replies
View Related
Mar 22, 2009
Just did a fresh install of XP on my bootcamp partition. And I can't gat any drivers to work correctly with the 9600m GT. Tried several drivers from Laptopvideo2go.com, but they keep reverting to a basic VGA res and color depth. It will not let me adjust any settings.
It says sothing about the currently installed graphics drivers was written for a previous windows installation, so teh default VGA driver will be used.
If anyone has any info to help a guy out here it would be greatly appreciated.
I never experienced any issues like this on either Vista x64 or Win7 X84/64.
View 10 Replies
View Related
Jul 10, 2007
If you are thinking about formatting and re-installing the OS, and setting up new partitions, use GParted. It is a free and very easy to use program. I couldn't believe how easily it worked sparing me the $40-$60 that a good partition program uses. I just thought I would give these guys some free press since they do all that work for free.
View 9 Replies
View Related
Feb 20, 2010
i decided to do a long over due fresh install of windows 7 to get rid of the nonessential progs that were there for no reason. However, i have run into a lil snag. Some things are missing from my new baby and i can't figure out where i went wrong.
1. My touch pad can pinch zoom but use other multitouch functions like 2 finger scrolling
2. When i adjust the volumn and brightness the indicators no longer show up on screen
3. The eject media button for my cd drive no longer works
View 8 Replies
View Related
Feb 18, 2009
I just did a fresh install of Vista Home Premium 64 Bit following Orev's guide. I backed up the SWSetup folder and everything went fine except a couple of things:
1.) Quickplay. I don't have the QPW & HPQPDP folders in the SWSetup folder. Does quickplay still come with DV4T's or is HP using something new? Do I need to install some other program or driver from SWSetup to get quickplay to work? Should I not even worry about it and just another player?
2.) Recovery Partition. I followed a link in another post, here at NBR, to HP's site telling me how to add quickplay from the recovery partition of the hdd. I can see the recovery partition but when I try to access it, it says it's empty. Is it possible to access it through explorer or do I have to boot from it? When I did the fresh install, I just reformated partition 1, the one with vista on it already and did nothing to the recovery partition. Is this correct?
3.) Bluetooth. After I installed bluetooth and only after the internet connection is established, the icon pops up on the system tray even though I disabled it in the startup menu and told it in the bluetooth program itself not to display the icon. Also, when the computer first boots up, it tells me bluetooth couldn't connect because of a .dll file that is missing?
4.) Scroll Slider on Touchpad. I disabled alot of things in the startup menu and now the scroll slider doesn't work. Obviously it's because of the things I disabled, but why would disabling it from startup cause it not to work? The touchpad still works fine. I followed some things in this thread and everything here. Could any of this affect the scroll slider?
5.) Recovery Manager. What happened to the recovery manager that came factory installed? Is that in the SWSetup folder?
6.) Drivers. Should I follow this thread and update all the drivers since they are all new compared to what is in my SWSetup folder?
View 7 Replies
View Related
Apr 20, 2010
My new DV7t Quad should be coming on Friday. Right now it is stuck in China, but I was wondering. Would it be better to keep the Windows 7 that they have install on the computer, or should I do a clean install? Right now, I have Windows 7 Ultimate running my old laptop, however, I only the disk for the 32 bit. While my Quad will be a 64 bit.
So if it would be a benefit to do a clean install, could someone explain how to do it without having a new windows 7 disk. I did order the system restore disks from HP when I bought the computer.
View 7 Replies
View Related
Mar 15, 2010
Just purchased... haven't received yet.... rather than try and clean up the existing system... I plan on installing a fresh windows 7 OEM.
Are there any problems to expect that those who have preceded me could help with?
1. Do you recommend installing windows and then updating all current drivers from HP's site or get the latest available?
I've always enjoyed running drivers without bugs more than try to eek out a little more performance and put up with bugs. This computer is going to be far faster than anything I need anyway..... so I prefer stable bugless drivers!
I currently own a ZV6000 and I learned not to trust Microsofts drivers or even some of the manufacturers drivers for that matter as the one from the HP site are the only ones proven to be bugless... is that still the case with the dv8t?
2. Previously with XP I have done a total reinstall and found much better performance than trying to clean the existing bloatware.
I've read some folks can't tell the difference.
I"m feverishly reading as much as I can to offset any mistakes I'll regret.
3. Should I try and use my existing OEM serial number than came with my computer or is that considered used already?..... just thought if I could use it, I could save the OEM serial that comes with my new purchase of windows 7 OEM so I can install later on another computer.
I"ve technically paid for two licenses.... just don't know how that will all work and I really don't want to fuss with all the bloatware, easier for me to spend the cash.
I just want to get the system totally installed and up and running with no device manager errors and all working.. then I can worry about tweaking further.
View 5 Replies
View Related
Jun 22, 2009
I got a Dell a few weeks ago and I didn't want to be left without all the right drivers etc so I just went with the install they put on it and took out all the bloatware.
Should I create a 2nd partition, and install a 2nd copy of Vista on that and then gradually migrate all the drivers and programs over to that side and then just eventually delete the first side?
Would that improve performance as well?
Then when Win 7 comes out I can just upgrade to that as well.
Anyway of knowing if I would get any conflicts or missing drivers or anything? Any problems you can think of?
Dell Studio 1555
View 10 Replies
View Related
Jan 31, 2009
I just formatted my Precision M4400 and was going about installing the drivers. Are any of the applications useful?
It seems like every driver has a utility or application to go along with it
View 4 Replies
View Related
Sep 20, 2008
Just ordered E6400 with Windows Vista Home Basic and will install Windows XP SP2 as soon as it is landed. Is there anything I need to know before installing XP in E6400 (e.g. back up driver, compatibility with hardware, etc)?
View 10 Replies
View Related
Jun 17, 2009
I just got my new dv3 and want to to reformat the machine and install Vista afresh to get rid of all the bloatware. I've burned my recovery disks using the HP Recovery Manager. I've also read through the "Clean Vista Install with no activation" thread here.
My question is this: what happens after I install a fresh copy of Vista? Do I need to download all the required HP drivers? Where can I get some of the software that comes preloaded on the machine like HP Mediasmart and Wireless Assistant etc? Does anyone have a list of all the software that comes preinstalled on the dv3? I'd like to be able to get some things installed like mediasmart (and anything else that might actually be useful and is not junk).
View 3 Replies
View Related
