Lenovo 11e E/Edge :: ThinkPad E535 / Win 7 Fresh Install - No Brightness Control
Jan 11, 2013
I fresh installed Windows 7 and installed all the drivers from Lenovo's website. Still I cannot adjust the brightness. It stays on MAX and drains the battery in 1h30min. All other F hotkeys work but not F7 & F8 for brightness control. Is this a BIOS/Drivers issue?
ThinkPad Edge E535
Model: 3260-CTO
AMD A10 4600m apu
Windows 7 64 Home Premium
New just turned on a few hours ago. Brightness control was working before fresh install. Did fresh install to get rid of bloatware.
View 5 Replies
ADVERTISEMENT
Jan 13, 2015
I have a several issues with rendering in Google Chrome.
1) When I write in address line, Chrome doesn't offer me suggestions for webs, but duplicates image of already opened website to the space below address line.
2) Second thing is the same as the first point, except instead of duplicated image, there are offered possibilities, but horribly zoomed in.
3) Duplicated image is also appeared instead of pop-ups in browser and also on the bottom of the page, in case I move a pointer on some url (I don't see url, but just duplicated browser)
I had this problem before, so I reinstalled Windows and here it is again. I have ThinkPad E535, Win7 x64. Only installed SW is ESET Smart security and Lenovo software.
View 1 Replies
View Related
Aug 29, 2012
I've recently formatted my hard drive and put my own copy of Win7 on my Thinkpad Edge 14 (0579-A62). There's no more recovery partition. After being surprised that Win7 didn't have any built in drivers for the display or WiFi, I plugged an ethernet cable in and went to the Lenovo support site. I tried all of the Networking: WLAN drivers but none of them let wireless work. I installed the Intel PROSet software and it just says "Driver is not installed" so I'm assuming it doesn't have anything to do with the WiFi key on the keyboard.
View 6 Replies
View Related
Aug 13, 2012
ThinkPad Edge, Win 7 Sp1. For the last month I have had a problem with the control key always down. Programs react as if the control key were pressed. MS Word 7 gives an error message that the control key is down and asks if I want to go to Safe Mode. I have had the keyboard replaced with no change. The computer has been thoroughly checked, all drivers, patches, software upgrades have been made by my Tech, and the Bios has been flashed.
Last week, I found a post on Google for Win XP where the poster had the same problems. The fix was to ensure that the Sticky Keys were turned off in Ease of Access on the Control Panel. I went to Ease of Access and turned off all of the selections, and the fix seemed to work. However, yesterday the problem reoccurred. I don't know if it is a problem with the motherboard, hardware, or with Windows. It appears that this problem affects more than one version of Windows.
View 9 Replies
View Related
Oct 2, 2013
I must be missing something -- I'm trying to connect my E535's HDMI output to the HDMI input on my Panasonic Viera LCD TV. I've attached both ends of the cable to the corresponding ports and I get nothing. I select HDMI 1 or 2 on the TV, and still nothing.
I've also tried toggling the F6 display selector key, although I believe this is active only when using the VGA port, correct?
The Lenovo manual is pretty sketchy on the matter of DVI, so what I have to do in Control Panel or elsewhere to get the computer's display on the TV with HDMI?
View 4 Replies
View Related
Mar 30, 2013
I just did a system restore of windows 8 (clean wipe) and went through the process of reinstalling all the drivers. I installed the latest version SmartAudio (8.32.43.0). In Google hang out it said the microphone wasn't working, then I clicked on the settings and made the internal mic the default, I got good mic for 1 second. Did it again and the same thing. But this is only for a single second. In skype I tried the same thing and it is just super quite, it doesn't register on the scale unless I blow directly into the mic (so I know it's picking something up). Last week I had my upgraded from win 7 Windows 8 install working just fine with the microphone (zero problems ever before with this thing). I checked in mic properties and DB and volume are set to max. So what is it about the fresh install that is making the mic all cracked out? (I checked the SmartAudio settings too) I'm having issues with my Bluetooth mouse too(disconnects at restart and have to reinstall) and Power Manager (it doesn't show up as a toolbar anymore). P.S.. I've gone to the X220 site and downloaded the latest drivers and installed system update.
View 1 Replies
View Related
Jul 1, 2013
I can't change my ram anymore. this is quite a silly problem.-, I am currently running on 6gb : 1 samsung 4gb @1600mhz(original stick) 1kingston 2gb@ 1333 mhz this works fine exept it gets really hot (80c) I have tried removing the slots one by one. but never managed to get into the BIOS once changed. also tried switching the sticks and just 2x2gb , even with just the original one it wont get into bios, sometimes i get beebs from the motherboard and sometimes I just get a black screen.
but it only boots into BIOS when I put them back where they were in the first place.
also tried removing the bios battery but that just resets the time -,-
laptop:
E535 a6-4400
Windows 8
View 6 Replies
View Related
Oct 2, 2013
I have what I think is a common problem with Edges: My E535, which I've had just over a week, will start up quietly. Then after about 3 minutes the fan will switch to high speed, even under light load (e.g.. only Firefox running, and limited scrolling or other activity). After a few minutes at steady high speed, it will begin cycling up and down, up and down, up and down..... This is getting to be moderately annoying. It does this whether the machine is plugged in or on battery. It also happens when I'm doing other things...OpenOffice spreadsheets or word documents, or even just letting the system sit idle.
I've attempted to change settings with Power Manager but for some reason, PM ends up crashing when I attempt to select a lower fan speed setting and a normal (level 10) brightness setting. Can the two problems be related? I'm presuming from similar posts for E530 and other Edges that this is BIOS related. Here is my info:
MS Windows 7 Home Premium, Version 6.1.7601 SP 1, Build 7601
Edge E535 Model 3260CTO
AMD A4-4300 M, Radeon HD
BIOS LENOVO HHET75WW (2.08), 10/24/12
SM BIOS 2.7
View 7 Replies
View Related
Apr 8, 2013
i just bought a Thinkpad e535.Every time I turn off the laptop (not hibernating, not sleeping) and unplug the power cable from the Ac Outlet the battery loses around 20% of charge every 24 hours,
What I've already done to troubleshoot:
-Disabled USB always on in BIOS
-Disabled Wake On Lan from Windows AND BIOS
-Running command powercfg /devicequery wake_armed to see if any device is programmed to power on the laptop
BIOS version is the latest one (2.08)
Power Manager software is 6.32
View 9 Replies
View Related
Sep 23, 2012
I recently bought a new E535 laptop working like a charm up to now. Bios access was possible by pressing Enter directly after switching machine one, than came some sort of POST analysis which could be skipped by pressing any key and than came some sort of table where I could access Bios by pressing some key (cannot remember which it was exactly). Alternatively I could enter Bios when in boot menu by pressing tab which switched to another tab where Bios could be entered (also some sort of diagnosis programs could be started). As mentioned in the subject it is impossible for me to do this now, after I did the following:
- exchanged built in HDD with an new SSD (Bios access yet possible)
- changed in Bios Setup boot mode from both (legacy + UEFI) to Uefi only (this might be the problematic point but I'm not sure)
- Installed Windows 7 in Uefi mode on ssd
No when I press enter on startup it brings me to Windows boot manager menu (you know where you can say start Windows normally or in safe mode and so). Boot menu also changed with a new "start windows" entry (well, this seems to be correct), but when switching to the other tab it is empty now, no entry for Bios setup or diagnosis tests anymore.
This is really bad. I have googled around and tried the following up to now without success:
- Pressing F1 instead of enter
- Shutdown laptop, and start with F1 pressed down
- starting without HDD
- starting unmodified HDD which was originally installed in laptop (which cannot be booted anymore, probably because it was installed in legacy mode)
I have also thought about flashing the bios, but the newest version available on lenovo support seems to be 1.04, but pre installed on my laptop is 1.10, so my version is a lot newer. Should I try to flash it nevertheless ?
View 4 Replies
View Related
Oct 2, 2013
Playing DVDs on a Windows 7 equipped Thinkpad?
My E535 will play non-copy protected DVDs that I got from a training program years ago just fine. But although it will play some movies from my local library with no problem, there are certain releases that give me an error message on Windows Media Player that I need to update my drivers and DVD-RW settings or something to that effect, yet all drivers appear up to date and everything seems to be set correctly in Control Panel for the DVD-RW drive.
And occasionally I get a message that "Your computer is running low on memory. Close other programs to continue", or something similar. Huh?? Nothing else is running.
The weird part is that I can play these disks just fine in my 8 year old Dell desktop that's running XP and a much older version of WMP.
FYI, my machine is Windows 7 Home Premium with 4GB RAM, 320GB HD and the AMD A4300 and AMD graphics.
View 4 Replies
View Related
Dec 20, 2013
I've problem with my notebook. After clean installation of win7 64bit, installation of all drivers with lenovo update and windows update is the hibernation option behaving in strange way.
The screen turns black but the computer is still working and when I start moving with mouse it shows me the login screen. So basically it just logs me off.
I tried to instal newest drivers of Chipset, Graphical card, Bios.... the option in cmd: powercfg -h is turned on... nothing worked. I also updated powr manager soft and driver.
View 1 Replies
View Related
Jun 19, 2012
I have 3 thinkpads that after a fresh reload are unable to connect to wireless networks. I have gone through and installed the different wireless drivers on the lenovo support website.I have gone through several steps of similar problems others have had but it hasn't made a difference.
I have installed:
-HotKeys & patch
-Power manager & driver
-Chipset
The realtek network -ethernet adapter and communications LAN driver.I have installed and removed each wireless adapter available
Thinkpad Edge 15
Type: 0319-46U
On a side note in the Device manager screen there is a "Network Controller" alert saying no driver installed for this device. I have determined it is some Realtek device but beyond that I am lost.
View 8 Replies
View Related
Mar 20, 2014
Recently i was gifted with an r32 think pad and i want to install win 7ultimate instead win xp pro that are already running. I insert the win 7 installation cd but when procedure starts it requests drivers which i dont have....
View 2 Replies
View Related
Nov 12, 2013
Why a fresh vanilla install of windows 8.1 pro would keep waking up from standby? Which even viewer can I look at to figure this out?
View 5 Replies
View Related
Nov 24, 2011
When I press Fn+F9, Wireless Radios Master Control will appear, but there's only WiFi icon and Bluetooth icon is missing (I installed all latest drivers for my model E520 1143-37G).
I have seen advices to reinstall Hotkey Features Integration Pack but here comes my second problem. This HFIP includes Lenovo Patch Utility 32&64 bit but it's old version (1.2.0.1), newer version is included in Power Manager and ThinkVantage Communication Utility (v1.3.0.9). That;s the thing I don't get at all...
View 4 Replies
View Related
May 27, 2014
The brightness on my new E545 with Windows 8.1 fluctuates weirdly while browsing the web or doing other this. This is really annoying. It will fade and then suddly flash to a brighter setting.
I already disabled the adaptive brightness in the power options and it still does it.Searching around the web I see a bunch of suggestions that are related to Intel graphics adapters but nothing related to AMD.
View 3 Replies
View Related
Dec 19, 2013
I've got little issues with screen brightness on my T510.
Sometimes after returning from hybernate/sleep I cannot control screen brightness at all (chaning it by Fn+Home/End or from PowerManager just dont work).
I have got latest nNvidia NVS 3100M drivers.
View 1 Replies
View Related
Apr 1, 2014
I want to do this: Wipe out my Lenovo Thinkpad X220 HDD and install a fresh operating system, so what are the things to do before wiping out my laptap.
What I have:
1. 4GB usb with Windows 7 installer
2. My laptap have 1 hdd, partitioned into two
a. 97.9 GB ( where my OS is installed)
b. 200 GB (where my personal files is stored)
How to wipe out my laptap, delete partiton and delete all data and instal fresh OS, Bios etc...
View 4 Replies
View Related
Jun 19, 2014
I have owned a T440S since late 2013.
Relevant Details:
T440S
Model : 20AQCTO1WW
OS : Windows 7 professional (original installation by Lenovo)
Latest Drivers installed as of June 2014 - including HotKey and Power Management
HotKey ver : 8.30
Power Managment : 6.65.1
Since receiving this laptop, OSD birightness control has always failed to work, i.e. does not appear on the screen when using the Fn+F5/F6 key combination nor does it control actual screen brightness AFTER FIRST resuming from sleep mode.
Sequence of steps that demonstrates the above symptom:
1. OSD brightness works fine after reboot
2. Putting the machine to sleep (I do not use hibernate) for a duration longer than a few minutes
3. Open lid the first time, hit Fn to resume machine
4. Pressing Fn+F5/F6 key combo does not display the brightness slider nor does it control brightness
5. Closing the lid and opening it again, causes OSD brightness slider to flash briefly and is now fully functional using Fn+F5/F6 keys
Your tech department should easily be able to re-create this issue on any stock T440S/Win7pro machine, as I have seen others comment about this very issue across other T440/OS variants.
View 2 Replies
View Related
Feb 20, 2014
My Edge E40 has no display, I tried
-Hard booting... 60 secs of holding power button without battery or A/c adaper
-Removing the RAM HDD CD and tried booting
-Attaching to my old CRT monitor
NOTHING works
How can one find if it is booting at all since there is no HDD indicator in E40..??
View 3 Replies
View Related
Jun 1, 2014
I just received my new E545 and booted it up. I've noticed the CPU is quite hot and so ran some software tests. It is showing the CPU temp around 92 degree C / 196 degrees F.
The chip is an AMD A10-5750M. I take it the heat isn't normal. Should I be sending this back to warranty?
View 1 Replies
View Related
Feb 14, 2010
I am experiencing issues with my touchpad on my Thinkpad Edge AMD with 4 GB Ram.
Sometimes the touchpad will work and sometimes it will not respond. When I restart the computer, it will work but not for long. I have the up-to-date drivers which came with the machine. I just received my machine 2 days ago.
View 9 Replies
View Related
Feb 9, 2013
I have a Lenovo Edge 330 (E330), with win 7 pro pre-installed. I'm annoyed by all the software that's installed together with the laptop, and I'd rather want the laptop with a clean install of Win 7. I have a Win 7 Enterprise, but not a Pro. If I attempt to install Win 7 Ent., would this cause any trouble? Drivers for all hardware seems to be available from the support site, that shouldn't cause any problem.
View 9 Replies
View Related
Oct 5, 2014
I just purchased the E540. Running Win 7.1. I have 2 WD 3.0 Passport drives plugged into a USB 3.0 hub. The 3.0 hub has the correct cable for 3.0. They are not being recognized as 3.0 devices (I get a message). I updated the USB 3.0 driver on lenovo's site and BIOS is set to auto.recognize. I have also tried the 3.0 option in the BIOS but that didn't do anything. I also tried using the drives without the hub in one of the 3.0 USB slots but that didn't do anything either.
I have checked the forum but what I found was possibly purchasing a 3.0 cable (not necessary - my cable is 3.0 compliant) but that was for a Wn 8 system or updating 3.0 device driver (done). So much for plug and play.
View 3 Replies
View Related
May 11, 2013
This laptop shows "no operating system found" when I power up. I ran knoppix which works but I tried pressing F8 to get to the CMD prompt but it doesn't work, I can get into the BIOS, anything I can do in the bios to do either a system restore or run the recovery?
View 2 Replies
View Related
Jan 27, 2014
I just bought my ThinkPad E431, the camera is working fine. But after a while the camera stop working.
Link to image .....
View 9 Replies
View Related
Apr 5, 2011
I just reinstalled windows 7 on my edge 13 (cause the system really slowed down), everything's working so far, expect the WLan Device. The network adapter (realtek RTL8168D/Familie-PCI-E-Gigabit-Ethernet-NIC) is properly detected, if i plug in a Lan cable I have got a connection.
I already tried this Lenovo Update tool, it installed some drivers and updates, but still no change. I already tried all Wifi drivers from lenovo homepage without success. Hitting the F9 Button didn't change a thing.
View 9 Replies
View Related
Sep 16, 2009
I've had several laptops but I am hating this one and is basically the Fn Keys and F# Key. I am pretty customed to use keys like F4(invoking word magic), F5 (update), Alt+F4 (closing windows)...
So, now I have to press Fn + F4 Keys, Fn + F5 Keys and Fn + Alt + F5 Keys....
So is there a way to continue pressing just F4 F5 and that's it?
View 9 Replies
View Related
Jan 11, 2014
Just a got a brand new Thinkpad 540-E. So far this CPU runs like a beast(with a new SSD installed). I have one minor issue though...
GOAL:: Make the F1-F12 keys function without having to press Fn first.
So I've tried the three tips I've come across online. Here is what happens:
1. BIOS(ThinkpadSetup): I only get the option to switch the Fn and Ctrl key. There are no option in my BIOS to do anything else with the keyboard/mouse settings.
2. Holding down the Fn key for 30 sec to 1 minute: Nothing happens. I even tried to do a three minute press and hold. I had a blast, but nothing came out of that neither.
3. Entering the keyboard settings in Win 7 manually: So I have no trouble entering the keyboard settings window, but mine looks extremely limited. In fact I see no options to do anything in there besides updating the driver.
View 3 Replies
View Related
