Lenovo E535 11e E/Edge :: Cannot Change (downgrade) Ram Configuration
Jul 1, 2013
I can't change my ram anymore. this is quite a silly problem.-, I am currently running on 6gb : 1 samsung 4gb @1600mhz(original stick) 1kingston 2gb@ 1333 mhz this works fine exept it gets really hot (80c) I have tried removing the slots one by one. but never managed to get into the BIOS once changed. also tried switching the sticks and just 2x2gb , even with just the original one it wont get into bios, sometimes i get beebs from the motherboard and sometimes I just get a black screen.
but it only boots into BIOS when I put them back where they were in the first place.
also tried removing the bios battery but that just resets the time -,-
laptop:
E535 a6-4400
Windows 8
View 6 Replies
ADVERTISEMENT
Oct 2, 2013
I must be missing something -- I'm trying to connect my E535's HDMI output to the HDMI input on my Panasonic Viera LCD TV. I've attached both ends of the cable to the corresponding ports and I get nothing. I select HDMI 1 or 2 on the TV, and still nothing.
I've also tried toggling the F6 display selector key, although I believe this is active only when using the VGA port, correct?
The Lenovo manual is pretty sketchy on the matter of DVI, so what I have to do in Control Panel or elsewhere to get the computer's display on the TV with HDMI?
View 4 Replies
View Related
Oct 2, 2013
I have what I think is a common problem with Edges: My E535, which I've had just over a week, will start up quietly. Then after about 3 minutes the fan will switch to high speed, even under light load (e.g.. only Firefox running, and limited scrolling or other activity). After a few minutes at steady high speed, it will begin cycling up and down, up and down, up and down..... This is getting to be moderately annoying. It does this whether the machine is plugged in or on battery. It also happens when I'm doing other things...OpenOffice spreadsheets or word documents, or even just letting the system sit idle.
I've attempted to change settings with Power Manager but for some reason, PM ends up crashing when I attempt to select a lower fan speed setting and a normal (level 10) brightness setting. Can the two problems be related? I'm presuming from similar posts for E530 and other Edges that this is BIOS related. Here is my info:
MS Windows 7 Home Premium, Version 6.1.7601 SP 1, Build 7601
Edge E535 Model 3260CTO
AMD A4-4300 M, Radeon HD
BIOS LENOVO HHET75WW (2.08), 10/24/12
SM BIOS 2.7
View 7 Replies
View Related
Apr 8, 2013
i just bought a Thinkpad e535.Every time I turn off the laptop (not hibernating, not sleeping) and unplug the power cable from the Ac Outlet the battery loses around 20% of charge every 24 hours,
What I've already done to troubleshoot:
-Disabled USB always on in BIOS
-Disabled Wake On Lan from Windows AND BIOS
-Running command powercfg /devicequery wake_armed to see if any device is programmed to power on the laptop
BIOS version is the latest one (2.08)
Power Manager software is 6.32
View 9 Replies
View Related
Sep 23, 2012
I recently bought a new E535 laptop working like a charm up to now. Bios access was possible by pressing Enter directly after switching machine one, than came some sort of POST analysis which could be skipped by pressing any key and than came some sort of table where I could access Bios by pressing some key (cannot remember which it was exactly). Alternatively I could enter Bios when in boot menu by pressing tab which switched to another tab where Bios could be entered (also some sort of diagnosis programs could be started). As mentioned in the subject it is impossible for me to do this now, after I did the following:
- exchanged built in HDD with an new SSD (Bios access yet possible)
- changed in Bios Setup boot mode from both (legacy + UEFI) to Uefi only (this might be the problematic point but I'm not sure)
- Installed Windows 7 in Uefi mode on ssd
No when I press enter on startup it brings me to Windows boot manager menu (you know where you can say start Windows normally or in safe mode and so). Boot menu also changed with a new "start windows" entry (well, this seems to be correct), but when switching to the other tab it is empty now, no entry for Bios setup or diagnosis tests anymore.
This is really bad. I have googled around and tried the following up to now without success:
- Pressing F1 instead of enter
- Shutdown laptop, and start with F1 pressed down
- starting without HDD
- starting unmodified HDD which was originally installed in laptop (which cannot be booted anymore, probably because it was installed in legacy mode)
I have also thought about flashing the bios, but the newest version available on lenovo support seems to be 1.04, but pre installed on my laptop is 1.10, so my version is a lot newer. Should I try to flash it nevertheless ?
View 4 Replies
View Related
Oct 2, 2013
Playing DVDs on a Windows 7 equipped Thinkpad?
My E535 will play non-copy protected DVDs that I got from a training program years ago just fine. But although it will play some movies from my local library with no problem, there are certain releases that give me an error message on Windows Media Player that I need to update my drivers and DVD-RW settings or something to that effect, yet all drivers appear up to date and everything seems to be set correctly in Control Panel for the DVD-RW drive.
And occasionally I get a message that "Your computer is running low on memory. Close other programs to continue", or something similar. Huh?? Nothing else is running.
The weird part is that I can play these disks just fine in my 8 year old Dell desktop that's running XP and a much older version of WMP.
FYI, my machine is Windows 7 Home Premium with 4GB RAM, 320GB HD and the AMD A4300 and AMD graphics.
View 4 Replies
View Related
Jan 13, 2015
I have a several issues with rendering in Google Chrome.
1) When I write in address line, Chrome doesn't offer me suggestions for webs, but duplicates image of already opened website to the space below address line.
2) Second thing is the same as the first point, except instead of duplicated image, there are offered possibilities, but horribly zoomed in.
3) Duplicated image is also appeared instead of pop-ups in browser and also on the bottom of the page, in case I move a pointer on some url (I don't see url, but just duplicated browser)
I had this problem before, so I reinstalled Windows and here it is again. I have ThinkPad E535, Win7 x64. Only installed SW is ESET Smart security and Lenovo software.
View 1 Replies
View Related
Jan 11, 2013
I fresh installed Windows 7 and installed all the drivers from Lenovo's website. Still I cannot adjust the brightness. It stays on MAX and drains the battery in 1h30min. All other F hotkeys work but not F7 & F8 for brightness control. Is this a BIOS/Drivers issue?
ThinkPad Edge E535
Model: 3260-CTO
AMD A10 4600m apu
Windows 7 64 Home Premium
New just turned on a few hours ago. Brightness control was working before fresh install. Did fresh install to get rid of bloatware.
View 5 Replies
View Related
Jan 18, 2013
Three days ago to buy a laptop lenovo ideapad z500. The problem is that I need the f1, f2, f3, f4. without having to press the Fn key now when I press these keys are options, brightness, contrast, volume. is very uncomfortable. How could I change the key configuration....
View 9 Replies
View Related
Jul 17, 2013
I just installed two new memory modules (4 GB each) but my laptop only recognizes one of them. I've tried researching how to change the RAM voltage in BIOS to see if that will allow the laptop to recognize both memory modules but can't find out how to do so.
How to change the RAM voltage in BIOS (specifically from 1.5V to 1.6V).
View 1 Replies
View Related
Mar 4, 2013
I have a Thinkpad E530 which has a 1366x768 display panel. Unfortunately, This resolution began to be low for my usage (some applications don't even enter the screen entirely!), so I'm searching for a higher resolution panel (like 1600x900 or 1920x1080). Could this be made or the new screen wouldn't work?
View 1 Replies
View Related
Aug 6, 2014
I'm using a lenovo thinkpad edge e530.
I have a problem changing my BIOS settings after installing win8.1 and enabling bitlocker. I wanted to reformat the partition it was on, so I wiped it with gparted and now all settings in bios are greyed out and I cannot change anything. What can I do to be able to edit my BIOS?
I also have linux installed on my computer if I could do anything from there.
View 1 Replies
View Related
Jun 5, 2013
I own an Edge 15, 64 bit processor. It came with 2gb RAM. I recently purchased and installed two 4 gb cards for a total of 8gb RAM. I updated my BIOS. Under "Computer>Properties" it is showing only 4 gb Install RAM. Why is it not reading or the system not using the additional 4 gb of RAM on the second card?
View 3 Replies
View Related
Sep 25, 2014
I have a W540 Laptop with 170W Ultra-Dock. I have setup 3 external monitors, but can't seem to get my 3rd monitor to run at 1920x1080. Whenever I set it to that resolution and I move a window to that monitor, the window flickers and shakes.
I have my right monitor at 1920x1080 (VGA), my middle monitor at 1080x2560 (DisplayPort), and my left monitor at 1440x900 (HDMI) - this is the monitor that I can't get to work at 1920x1080.
Wondering if there is a max number of pixels that the graphics card can handle? I am using a NVIDIA Quadro K1100M 2GB graphics card.
I read on a review of that graphics card that it can support 4 monitors and up to 4K resolution (although not sure if it meant that all 4 monitors could be at 4K - I'm thinking not)
How to make this work?
View 3 Replies
View Related
Mar 30, 2014
I have a G710 that I just purchased this week and just got around to setting up my cell phone to bluetooth some photos to it and found the G710 could not be discovered so I checked and found this error message in the properties status for the bluetooth as:
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"...
View 4 Replies
View Related
Aug 29, 2013
I have a X230 (Dislay ports: VGA DP++). It is in a Port Replicator Series 3 with USB 3.0 (part number 433615W) (Dislay ports: VGA)
For display I have:
Lenovo Thinkvision 22" (no model number on case - 4 years old) 1680x1050 (Dislay ports: VGA DVI)
Benq GL2450 24" (Dislay ports: VGA DVI HDMI)
Numerous cables (DVI<->DVI VGA<->VGA HDMI<->HDMI)
How can I hook both monitors to the X230 for a dual external display (laptop monitor is not used)?
View 3 Replies
View Related
Aug 21, 2013
I just purchased a new T430s and, overall, I've been very happy with it. However, I'm having trouble getting a particular multi-monitor configuration to work.I am trying to get the very first configuration as is described on this page. URL....It is simply a 3-monitor setup where one monitor is external and hooked up via VGA, another monitor is external and hooked up via DisplayPort, and the third monitor is the actual laptop monitor. I simply cannot get this to work! I can plug in a single external monitor, but when I try and plug in a second, it always disables my laptop monitor, so I end up with only a 2-monitor setup.
I've called Lenovo Support 3 times after encountering this problem, and They kept citing that it was a "configuration" issue and that it's not their problem, and then they'd forward me to another department which would then forward me right back to them.
View 4 Replies
View Related
May 15, 2014
How can I configure Bitlocker in X1 Carbon using Win8.1 so that the laptop won't ask the freaking Bitlocker Recovery Key every time when I boot the laptop IN the OneLink Pro Dock station AFTER I've used the machine WITHOUT the docking station (or vice versa)?
Bitlocker works OK if I boot the laptop every time in same mode (using always docking station OR not using it ever). However, I need to use the laptop in both modes; with the docking station (at work) and without it (at home and when travelling). And I'm not wanting to type the looooooooong Bitlocker Recovery Key every time when I boot the laptop in different mode.
How can I tell for the Bitlocker that both these modes are trusted ones?
View 3 Replies
View Related
Sep 8, 2014
I wanted to downgrade my new Lenovo U330 Touch from Windows 8.1 to Windows 7 (x64 Home Premium).URL...I accidentally deleted the partition with Windows 8.1 on it by mistake.
Now, when I try to install Windows 7 from the boot sequence, I get the message saying that "Windows cannot be installed to this disk. The selected disk is of the GPT partition style".How do I install Windows 7?
View 2 Replies
View Related
Sep 23, 2014
I've bought new t440s with Windows 8.1 Pro preinstalled. Because of touch screen it doesn't allow me to select Windows 7 preinstalled. Bough with touch screen mostly because of possible Win 9 upgrade in future. I've already ordered Win 7 recovery DVD set, but t440s doesn't have DVD So I would need to make a USB stick from recovery disks. How to do that?
Some additional inputs to make story more complex. Before installing Win 7 I would replace existing 500Gb HDD with Samsung 840Evo 500Gb SSD and increase memory to maximum 12Gb (bought with only 4Gb). How that will works with Win 7 key? Does Win 7 would be able to read Win8 key from BIOS? Should I ever bother with recovery disks from Lenovo or just download Win 7 ISO from MSDN subscription that I've got on work and make USB stick from it according to: Prepare an usb thumb drive, to boot windows 7 in U...
Also I can install Win 7 on existing HDD, then make a clone of disks on other PC and install SSD with cloned partitions, but that I think not best course of actions.
View 5 Replies
View Related
Aug 25, 2014
I have a new U530 I just bought. I need windows 7, so I did a downgrade. I downloaded all the Win7 drivers, and managed to make everything happy except no Wifi. The Win7 drivers on the support site don't have the the hardware ID for this wifi card. In windows 8 it shows Broadcom 802.11ac Network Adapter, with PCVEN)14E4&DEV_43B1&SUBSYS_062E17AA&REV_03, which does not show up in the .inf file for the drivers that install from the wl05w7.exe driver file. Also the setup quits without graceful finish, even if I right click and do run as administrator.
I purchased two of these laptops, but one needs to work with Win 7. I'm willing to switch out the wifi card if you have something that works with Win 7.
View 3 Replies
View Related
Jun 3, 2011
the way the F keys have been switched on my Edge 14", today I came across some time to fiddle around with it. I googled what I needed to do...and came across this question on yahoo, which is exact what I need. I bought Lenovo Thinkpad Edge several months ago, and I really like it so far. But I use MS Excel a lot and I always use shortcut keys which involve F1~F12. On my thinkpad, I always have to hit "Fn" and "F1~F12" keys simultaneously, and it is a little annoying since I've been used to using F1~F12 keys without hitting "Fn". So I went to BIOS keyboard setting, and enabled the Function key lock. It became a little bit better, because now I don't have to hit "Fn" and F1~F12 simultaneously, but I could press "Fn" AND THEN, F1~F12. But what I really want is the "Fn" key always on without pressing it. On the BIOS screen, it says hitting "fn" key twice keeps "Fn" key always on, but whenever I hit it twice and hit F1~F12, it doesn't function like F1~F12 key, but it just controlls the sound volume or display light. Is there any way to keep "Fn" key always on without pressing it everytime I want to use F1~F12 keys?"
In short, in the BIOS page, once "enabled", you are able to double tap the Fn key and have it stay on without you pressing it each time; however, it doesn't appear to work that way and turns off everytime you use a F key.
View 3 Replies
View Related
Nov 7, 2009
The thing they call "edge to edge glass" which is really just plastic above an ordinary screen. The thing is, that the screen under that edge to edge plastic is a nice anti-glare screen, no kidding! You can see this if you take your laptop in sunlight and tilt it the right way.
So what's happening is you're getting the worst part of an anti-glare screen (reduced contrast ratio) plus the worst part of a glossy screen (unless you have a really pretty face).
I took the plastic thing off, cut along the black/clear border, pulled out the middle, and stuck the centerless border back on the laptop.
Result? THIS SCREEN IS FANTASTIC. Yeah ok, of course I would say that. But if you knew me, you'd know that was way out of the ordinary and really meant that THIS SCREEN IS FANTASTIC.
One thing you may not have considered is that the screen in its default position has yet another flaw, both sides of that glossy plastic thing are glossy, so some of the light coming from the screen is reflected back to the screen, and as you know light reflected onto the screen has a yellowish tint. That is my guess as to why the whites on this screen are really really white now, and the screen is much brighter. This also explains why other 300nit screens used to look so much brighter than this.
I will have more pics when I am able to charge the battery to my good camera. If anyone has any questions about removing that plastic thing I'll be happy to answer your questions, it's actually pretty easy. For those interested, here is how I did it:
1. I removed the "star" head screws, this was accomplished not with a special star head screw driver, but an ordinary flat head precision screw driver.
2. Put some paper over a hacksaw blade to avoid scratching, wedged it under the plastic near the top where the camera is, and snapped out the first of the several lock-in points on along the top edge. I proceeded to detatch the rest of the top of the screen in this way.
3. Both the left and right sides were held on mostly by adhesive, the very edge point locks in slightly, but the efforts removing these sides are focused mainly on separating the adhesive bond.
4. I pulled upward on the plastic and it came right off, there seems to be no adhesive or lock-in points on the bottom side.
5. Using the center of the screen as a test area, I tested several cutting utilities and decided on the utility knife. To my surprise, the plastic was about 1mm thick.
6. I clamped the screen down to the table, with a straight edge positioned 1mm inward of the black line, to give headroom for errors.
7. I cut along these lines, and repeated step 6 for each side, and pushed out the center to reveal the border piece that now resembled a common laptop screen enclosure border.
8. I used a medium grit sand paper to bring the cut lines to meet the black lines, and finished it off with a fine grit sand paper.
9. I applied some electrical tape to the area between the edge of the screen itself, and the edge of the laptop on the right and left sides because there was light leakage, and then popped the border back on and screwed it down.
Found the charger! Here's the high res shots. They do *some* justice to the screen quality.
View 10 Replies
View Related
Aug 4, 2009
How does this screen do for viewing blu-ray movies? I know that everyone is raving about the RGBLED, but if this option is still good, then I'll go with it, because it's about $250 cheaper...
View 9 Replies
View Related
Nov 7, 2009
I went insane and cut along the black-to-clear border of the m1340 screen thing. The thing they call "edge to edge glass" which is really just plastic above an ordinary screen.
The thing is, that the screen under that edge to edge plastic is a nice anti-glare screen, no kidding! You can see this if you take your laptop in sunlight and tilt it the right way.
So what's happening is you're getting the worst part of an anti-glare screen (reduced contrast ratio) plus the worst part of a glossy screen (unless you have a really pretty face).
I took the plastic thing off, cut along the black/clear border, pulled out the middle, and stuck the centerless border back on the laptop.
View 5 Replies
View Related
Aug 14, 2009
[url]
Heres a video I made to demonstrate the ammount of flex on the edge to edge lid. It does have flex and bend, but its not as bad as the one j3n82 reported. I recorded with an iPhone so the video quality is crap. Also forgot I had left it in portrait mode when I recorded it (I didn't have a tripod so I used a cup lol). But I hope it gives some of you a basic idea of the quality. I thought openning the blinds to allow the vertical lines will show the bend/flex a lot more. I was applying quite a bit of pressure, although it doesn't seem like I was in the video. I felt as if any harder I might have damage something, or maybe pop the edge to edge screen out. I used an 8lb dumbell, I think thats the limit.
If you noticed the cloth I used to cover the keyboard when I closed the screen, I did this this to avoid getting the smudges on the screen when I pushed the lid down onto the keyboard.
At the end of the video I tried showing the Edge to Edge display, notice how theres another layer of screen over the bezel. Thats the difference between the edge to edge.
View 10 Replies
View Related
Nov 20, 2012
I just bought an Edge 130 and wanted to set it up today. But I just can't enter the BIOS! I keep pressing F1 during the Lenovo splash screen. I've pressed it repeatedly, held it down, I even tried it with the Fn button pressed. Nothing worked.
I've have been working with and professionally supporting Lenovo (and before IBM) notebooks for over 10 years and not once did I have such a problem. This is only the second E-series notebook I have ever had. I bought myself an E525 last summer and had no such problems and at work we have T-, X- and W-series.
View 7 Replies
View Related
Aug 13, 2012
ThinkPad Edge, Win 7 Sp1. For the last month I have had a problem with the control key always down. Programs react as if the control key were pressed. MS Word 7 gives an error message that the control key is down and asks if I want to go to Safe Mode. I have had the keyboard replaced with no change. The computer has been thoroughly checked, all drivers, patches, software upgrades have been made by my Tech, and the Bios has been flashed.
Last week, I found a post on Google for Win XP where the poster had the same problems. The fix was to ensure that the Sticky Keys were turned off in Ease of Access on the Control Panel. I went to Ease of Access and turned off all of the selections, and the fix seemed to work. However, yesterday the problem reoccurred. I don't know if it is a problem with the motherboard, hardware, or with Windows. It appears that this problem affects more than one version of Windows.
View 9 Replies
View Related
Feb 20, 2014
My Edge E40 has no display, I tried
-Hard booting... 60 secs of holding power button without battery or A/c adaper
-Removing the RAM HDD CD and tried booting
-Attaching to my old CRT monitor
NOTHING works
How can one find if it is booting at all since there is no HDD indicator in E40..??
View 3 Replies
View Related
Jan 15, 2015
I have a Lenovo Thinkpad Edge E530. Occasionally I will have the following icon pop up on my screen and refuse to go away: A reverse google image search told me this is the logo for the "thinklight", which as far as I know is not actually equipped on this model. As a side note, I have seen this happen on a friend's E530 as well.
View 4 Replies
View Related
