HP/Compaq :: Install Windows 7 On A TX2000Z
Sep 10, 2009Do the drivers work for the touchscreen/waycom stuff? Any other caveats.
My experience with Windows 7 on "regular" laptops has been good, but haven't gone down the tablet route yet.
Do the drivers work for the touchscreen/waycom stuff? Any other caveats.
My experience with Windows 7 on "regular" laptops has been good, but haven't gone down the tablet route yet.
I have an HDX18t with an SSD partitioned for Vista and the Win7 RC. When I get my upgrade disc for Win 7, I'm considering installing it over the Win 7 RC partition and leaving the Vista partition in tact for now in case their are any problems with the install. I've read that you can do a clean install even with the upgrade disc. Is this a viable and/or advisable method?
View 3 Replies View RelatedJust installed Windows 7 on my HDX16t. For the most part, everything is working great with minimal drivers install. Had to install the memory card reader, and a few others but worked fine with Vista drivers.
What I can't get working are the quick launch buttons. The mute works (although it doesn't change colors), the volume up and down works, The treble / Bass does NOT work, wifi works, and the media smart, stop, play, eject , etc do NOT work.
Anyone get these working with Windows 7? If so can you point me to the drivers and or process?
My new DV7t Quad should be coming on Friday. Right now it is stuck in China, but I was wondering. Would it be better to keep the Windows 7 that they have install on the computer, or should I do a clean install? Right now, I have Windows 7 Ultimate running my old laptop, however, I only the disk for the 32 bit. While my Quad will be a 64 bit.
So if it would be a benefit to do a clean install, could someone explain how to do it without having a new windows 7 disk. I did order the system restore disks from HP when I bought the computer.
I just tried doing this a couple days ago and at first it was working perfectly. About a day later when I came home from work and turned it on, it took about 3 minutes to load and I got all kinds of errors. Aero Glass was disabled, it told me that it couldn't initialize the "Windows Notification Service service", and all other manner of problems existed. I tried doing a system restore to a configuration that was about a day older, and that seemed to work the rest of the night. When I came home again the next day and started it up, the same problems were back.
I'm ready to do another reformat and reinstall, but I'm curious how everyone else is doing this (successfully). The method I used last time was to just let it install drivers for everything it found, then supplement what it couldn't find with drivers off the HP website. Unfortunately there are about 20 different HDX16 configs on there, so I'm not sure if I got the right one. Are the drivers different among them?
The laptop I bought back in August came with Vista Home Premium 64-bit, so later this month I will be receiving the free Windows 7 "upgrade" disc from HP... My main question is, will I or won't I be able to do a clean install with just this disc?
View 4 Replies View RelatedDirver-wise, can I install Windows 7 on a Mini 1001TU?
Also, can you install additional RAM? And does it void the warranty?
How does this machine rack up against Dell's Mini 9? Which one is considered the better pick?
I downloaded and burned an ISO Win7 install file (legal, I am using a purchased key to register it), and wanted to do a clean install of Windows 7 without all the HP Bloatware crap like the sticky at the top of this forum suggests.... and when the install is done its first restart, and is on the Completing installation... phase the second time, it gives me a:
"Windows setup could not configure windows to run on this computers hardware".
Are you serious?
Does anyone have a fix for this please. I now have an inoperable, and un-installable brand new laptop. Sweet.
I am installing it via the USB DVD Drive, through a DVD (Not even a USB flash drive problem!). I have tried it twice now and it failed both times. I even tried reseting the BIOS settings to default.
It's obviously a glitch in something, because I was running Win7 on the laptop this afternoon.
I am having trouble installing Windows 7 on Compaq 610 needs CD/DVD drivers.
View 1 Replies View Relatedi am having a problem installing windows xp english version on my compaq presario b1011 which is default in german . when i try to install a english version of xp it hangs in xp logo itself . when i try to install a xp english version i am getting this error
"windows xp professional setup
setup was unable to verify c:
your computer may not have enough memory to examine the drives (or) your windows xp CD may contain some corrupt files to continue press enter" this is the error message when i continue to install it installs and after installation it hangs with xp logo . if i try to install with xp german it installs smoothly without error
I am going to install MSDN version Win 7 on my dv6700. Is there any issues, esp. drivers issues so far with this setup? Do current vista drivers work well with Windows 7?
I am not concerned about big things like display drivers. I am just crossing fingers for drivers like authentec, wifi and bluetooth?
Is it possible to do a clean install of Windows 7 on a dv6000 laptop that currently has Vista Home Premium? I know it is possible to do an in-place upgrade but I will want to do a clean install. From everything I have read, it sounds like Win 7 will require you to have a set of original Vista install disks as verification. No actual preinstalled disk came with my HP laptop. There was a partition with a copy of the backup files but that was deleted when I created my HP backup disks. I would not be surprised if the backup disk was rejected by Windows 7 if I tried to use it for verification.
View 8 Replies View RelatedI installed windows 7 on hp compaq nx9020 (pg751se) and lost my sound. On speaker icon it says no audio device installed. I've checked every where and cant find any sound driver on the laptop. Sound did work when windows xp was installed before windows 7.
View 1 Replies View RelatedI bought a new MacBook Pro and am going to give my folks my 2 year old HP dv6500t. I backed up all my stuff and using the System Recovery DVDs from HP wiped out and reformatted the drive.
Unfortunately now when I try to turn on the system I get a message about there being an error in c:windowspantherunattend.xml at line 6 column 169 (I think) and it can't process the answer file.
I tried to boot into safe mode to see if I could see what is in the unattend.xml file and of course Windows Install can't run in Safe Mode.
Is there any way I can get the dv6500 to be useable again?
The High Definition Audio Device ha an error10 , there ios no Driver installed for this device , is there a work around available to get my sound working??
View 3 Replies View RelatedI'm not able to install Intel Management Engine Interface (MEI) Driver. During Installation a message pops up saying, "The setup failed to install one or more drivers." I downloaded the latest version of the above software but still didn't work. I'm using Windows 7 Ultimate 64bit.
View 7 Replies View RelatedI replaced hard drive with SSD and installed windows 7 ultimate (X64) on my HP Pavilion G4 notebook. However, I am not able to install switchable graphics on my laptop now.
Â
I have tried this
1. Installed HPSA and ran update and tuneup. It asked me to update "AMD High-Definition Graphics Driver" but it failed with multiple retries and after some time now it doesnt ask to do this update at all. Now everything is green in HPSA but I am still not able to switch the graphics
2. Tried to download from HP drivers page but it says "AMD Catalyst Mobility cannot be downloaded due to incompatible harware/software on your computer"
3. Tried uninstalling the driver but windows updates the drivers automatically.
4. I also updated BIOS as suggested at [URL] ..... but still no luck......
Â
Product Name: HP Pavilion g4 Notebook PC
Operating System: Windows 7 Ultimate 64-bit Service Pack 1
Product number : LQ375PA#AB
I just finished doing a clean install with the help of velocity's clean install guide.
Everything is normal, but I have "unkown devices" in my device manager. Also, the touch sensitive volume control above my keyboard works, but the graphics that pop up on the screen while adjusting the volume are not there anymore.
I have a brand new DV6T 1300 CTO, and here is the HP driver webpage. [url]
Does anyone know which drivers I probably need to update? Has anyone experienced this?
Here is a Screen shot of my device manager:
I called HP support thinking they wouldn't care if I did a clean install. The rep was sort of a jerk. He told me I need to buy a $30 recovery disk from them. I told the rep all I needed to fix was 2 little things, which arn't worth $30 in the first place. I mentioned the HP drivers webpage and asked if he would point out which drivers I probably needed to download to fix my problems, but he wouldn't tell me. He kept giving me the run around.
I did create both a backup disc and a recovery set before I did a clean install.
When i bought my laptop it have windows 8 but i disliked it and have many bugs on my games so i installed windows 7
and complete delete everything in my harddisk. I couldn't find product keys anyway packet , laptop etc.
Â
My laptop is pavilion g6 2255eo
i need to know can i install windows server 2003 in the same laptop. I have partitoined my Laptop in to C, D and E drives,
now i installed Vista in C: drive is it posible to install windows server 2003 in D: drive? Suppose if i install like tht it will cause any problem? . Thank you all
My DELL Inspiron 1525 (Midnight Blue)
Screen: 15.4" HR glossy widescreen (1440x900)
Processor: Intel® Core™ 2 Duo T6400
RAM: 4.0 GB DDR2
HD: 320 GB
how to install windows 7 into pre-installed windows 8 hp pavilon 15-B001EE First it asks about a driver So I removed the harddesk and installed windows 8 on other PC. when I returned the harddest to computer and just when start loading windows it gives me a blue screen Do not know what to do since I removed the recovery partation
View 2 Replies View RelatedMy Y580 should be arriving shortly. I got it on the Black Friday Special and it comes with Windows 8. I bought a SSD to replace the HDD and I am wanting to downgrade it to a fresh install of Windows 7 Ultimate or Pro and I have a couple questions:
Â
How to do this for the Y580? I have not been able to locate one.
Â
Also I am assuming I would not want to use the Windows 8 device drivers correct? Do I use the Windows 7 device drivers?
Â
Would use the drivers from the Lenovo site or each devices specific website? I am going to try to save them on a DVD in advance and want to be prepared.
Have an HP DV8110us Pavilion notebook purchased in 2006. Â Running XP SP3. Â Upgrading to Windows 7 with a clean install. Â Ran the MS Windows 7 Upgrade Advisor. Â This notebook has the AMD Turion 64-bit chip running at 1.8 mhz. Â I have 2 GB memory. Â Looking through the Win7 options, I decided to order Win7 32-bit, since I'm only carrying 2 GB of memory. Â Win 7 64-bit seems to be happier with 4 GB. Â While the Advisor shows I have some drivers that need updating after Window 7 is installed, I just noticed that the Realtex RTL8139/810x NIC needs a new driver for 32-bit Win7, but under 64-bit Win7, the NIC is compatible.
Â
Should I have ordered the 64-bit Win7 ? Â Or should I look around for a new Realtek driver ? Â Realtex has a link to an old Vista driver that should work. Â Other searches suggest that a workable driver might be on the Win7 DVD.
Has anyone clean installed Windows 7 on their new Inspiron laptops? I just bought a E1545 and it came with Windows 7. I'd like to clean install and I was wondering if it was as easy as popping in the Windows 7 DVD and waiting for it to install and then just dling the drivers online and installing.
And how about Windows XP? I know most people have gotten used to and accepted Windows 7... but has anyone installed WIndows XP on their laptop that came with Windows 7 originally? I mean a native install, not virtual...
If no one has done this yet, I am willing to create a guide if it is requested and if I succeed in doing so...
Just bought an 8940G from Newegg and received it yesterday.
I started it up, just enough to run the recovery tools and burn the recovery DVD's. After that, I blew it away and installed Ubuntu (9.10)
My intention is/was to run Windows 7 in a VM off of Ubuntu, but I'm a bit concerned about my ability to do the reinstallation off of the recovery DVD's in the VM. I'll be running VMware 7 Workstation.
-) Has anyone ever done a native OS installation from the recovery DVD's?
-) Will the Win7 OS install from the recovery DVD's barf if being installed in a VM?
I'm guessing that the install would be OEM locked, so it technically won't "see" my laptop hardware in the VM environment.
I have installed Windows 7 Ulitimate on my FZ280. I followed the instructions of ScuderiaConchiglia and the win7 suggestions of Dr Pratik. The instructions seemed to be perfect.
I installed the OS and followed his instructions. Everything seems to work perfectly, including the Fn keys.
But I have found my first issue. I am having problems playing blu ray discs. I have tried Windows Media Player, DivX and Cyberlind PowerDVD to no avail
installing windows on the mac and found the boot camp assistant in my OSX and it partitioned the HD and ask for the windows disk! does this mean I don't need fusion 2.0? the thread dose not mention VMware fusion, in installing widows
View 10 Replies View RelatedI know there are a number of options out there like Bootcamp, VMWare, Parallels, and VirtualBox. Which is the best way to go to install Windows?
View 3 Replies View RelatedI mean install windows XP or 7 stored in a SD card( not via a sd card), because my SD slot usually free and i want to use it
View 10 Replies View RelatedI have a MacBookPro5,2 that I've recently installed a 2nd HDD using an optibay caddy where the superdrive had been.
I would like to have Windows 7 running natively on that 2nd drive. Can I do this via Bootcamp? Or do I use the OS X Disk Utility app to format it as FAT and then proceed to install the windows OS without using bootcamp? I assume I would then need to install the apple drivers that are on my snow leaopard install disk.
Is that about right? Will I be able to selective boot by holding the Opt key at bootup jsut as if I had used bootcamp?