I have a presario C500 I went to turn it on and it said enter power on password. i dont have on then after so many tries it said SYSTEM DISABLED 13865 i cant be with out my laptop i need it for school..
View 2 RepliesOn startup I get "Administrator Password or Power On Password". After three tries - System Disabled (65684298).
View 2 Replies View RelatedI pursched a compaq presario cq57 from a pawn shop && when getting home to turn on a black screen with blue shows up saying administrator password or power on password. After entering the password 3 times this is what shows up system disabled 76902311
View 2 Replies View RelatedSystem disabled after 3 tries, it keeps showing 68235122
View 2 Replies View RelatedI have a Compaq Presario CQ57-339WM and it won't boot.I tried to restore it, but I can't get into the bios to let it boot from CD.It says system disabled 59088611 after 3 failed attempts.
View 9 Replies View Relatedsystem disabled code is 52670601 hp pavilion g4 want to reset...
View 1 Replies View RelatedMy notebook (pavilion g4) asks for an administration or power on password (which I don't remember). After trying several times it shows this message:
System Disabled: 81203610
I recently bought this laptop from a friend and it has a bios lock I tried different codes off the site but now it says system disabled with this code [09310] ... I don't know what to do.
View 4 Replies View RelatedHP 2000-2d13ca system disabled, asked for asministrator password and after failed attempts has disabled system with code '75669971'.
View 1 Replies View RelatedI have an HP Compaq Presario F 700I forgot administrator pass word.System disabled code: 07497
View 4 Replies View RelatedI put tried to put the password in but got that message plus the number 85628188
The laptop had been left standing for a long time. What do I do next ?
I have a compaq presario CQ61-420US with similar problems below, except I have a black screen, fan turns blinking lights are the same (num lock and cap lock) but they are flashing continuously every second or 2. I have tried the hard reset with the ram fix, connecting an external monitor, changing the battery, and the power adapter to no avail. I also used compressed air on the vents just in case was stuffed with dust since it will overheat and may cause problems, but nothing.
One option I can think of is purchasing a new MotherBoard, but I'm trying anything else before that.
My ancient C500 fan is noisy, a constant slight grindy noise. Its been like this for months and I cant take it anymore. Can I clean or replace it w/o too much trouble or is it time for a new laptop? Looks like I'd have to take off the whole bottom to get at it...which Iwill do, if it will shut the damn thing up.
View 4 Replies View RelatedI've got an old C501NR with 80 GB HD that blue screened and died. Disk check indicated failed sectors. Wont boot into windows. Hp said its dead or dying. So I bought a 160 GB and Windows wont see any of it, neither does Bios. HP said it was too big, would only handle 120 GB so I ordered one of those, same speed/cache as the original. Same issue, its not found by Bios or Windows setup disc.
Here is the fun part: HP now says I can only use a certain part number which seems like total BS to me. Surethe 2 I tried were western digital and they come with Seagates, but so what? So if it isnt THAT that prevents me the puter from seeing the new drives, and that seems highly unlikely, what is it?? The drives are seating and connecting just fine.
i have a presario c552us laptop and it recently started making weird noises around the fan underneath. i took a look and it seems to be coming from the fan. it sounds like some1 stuck something in there and its hitting the fan blades. doesn't happen all the time either. when the fan is spinning, sometimes its great(like right now) and other times it sounds horrible.
i took apart the whole laptop and cleaned out all the dust, especially in the heatsinks and fan assembly. it seems to spin fine when i use canned air on the fan blades. it has the normal high pitch fan spin without the grinding noise and what not.
not sure what the deal with that is, but maybe the fan has issues gripping or spinning itself.
so it sounds like i pretty much need to replace the fan and the motor.
can i replace just the motor and fan? or do i have to buy the whole assembly with the weird shaped heatsink?
I accidentally dropped my Compaq Presario C571NR and it fires up Ok, but the screen is black. I have tested the video card with other monitor and it seems to work fine. I did some research and I found that it could be that either the inverter board or the backlight might have gotten damaged. I have purched a new inverter card online (awaiting arrival) to replace the existing one, but I wanted to know if any of you know which of them has the propensity to get damaged first, the inverter or the backlight?
I'm hoping is the inverter because it seems the easiest to replace, but if it's the backlight, then I'm screwed because I've read it's quite difficult to replace and it's more expensive. Compaq says they'll charge me $300 to fix it (since my warranty has already expired) but I might as well get a new one if the new inverter doesn't fix the problem.
I recently reinstalled windows XP though I dont know if that has anything to di with this, I didnt notice the problem till a few days later so I tend to think not. BUt now there is only a slight difference in screen brightness when I plug in as compared to on battery. I wonder if my backlight is failing.
View 6 Replies View Relatedi am attempting to replace the CMOS battery in my presario; however, i can't seem to find it. i have tried to search for the service manual for this model but could not find it. i looked at the service manual for the C300 series and it indicated that the CMOS was under the memory module, but it isnt in the same place in mine.
View 8 Replies View RelatedMy laptop model is HP Elite Book 8400p.I can't boot the system.In system diagnostics, it gives start up test,run in test,hard disk test as failure...Reason shown is "Test(quick).....Error:Read failure Error:Read failure".. How can I solve this?
View 5 Replies View RelatedI started up my hp mini and got a message saying password check failed fatal error....... system halted CNU84938ZV ....
View 5 Replies View RelatedI'm thinking about picking up a usb wireless n adapter; which means I won't be needing the internal wireless nic. Since that's a mini PCIe slot, I was wondering if anyone has tried replacing that with one of the many SSDs floating around the web...
2 main questions I have about those:
If they're mini-pciE, why are there sata versions and pata versions out there? There's no sata or pata connector on these cards it seems, the pci-e connector is all there is. Do they somehow use the sata/pata controller on the motherboard via the pci-e bus?
2nd question; would there be any way to boot from one of these? The bios has a bunch of options for booting up, network, usb, usb floppy, etc... but none for mini pci-e or anything like that...
Laptop is a presario C500, more precisely c551nr, broadcom 802.11b/g nic, 80gb toshiba 5400rpm slow ..... hard drive, and a celery 440 running the show..
Password check failedFatal error ... System halledCNU9301LXT COMPAQ MİNİ 110
View 3 Replies View Relatedcompaq mini 700 enter current password fatal error system halted!!!
View 4 Replies View RelatedI have several HP 8530p and I getting the num lock & cap lock leds blinking 5 times which indicates a general system board error. Bought new boards still getting the same issue. Note all the units will boot to windows fine, but there is a 10-15 sec delay in hard drive response when operating pc. The mouse is real time responsive but once you clink on a item the lag shows up. What to look for as the problem, CPU , Memory changed, Fans, Cooling system. Bios versions have been updated, I've torn the unit down, cleaned and added new thermal paste to CPU, GPU and added copper shims to promote better heat transfer. The system Diagnostics indicates hardware is ok.
View 3 Replies View Relatedpassword check failed fatal error system halted CNU902254V its an hp mini 1035nr. i forgot the password.
View 9 Replies View RelatedI have the same problem... Password check failed fatal error ...system haltedCNU018089X
View 3 Replies View RelatedAfter rebooting my system I now come to a screen to enter system password. Only thing is.. I never set this and there is no way around it.I have tried the take battery out reset CMOS trick that used to work in desktops to no avail.
This is the message I get after too many password attempts.
system disable key 92931076
I have three user profiles in my Compaq Presario CQ-42, one is administrator and others are "Other User". When I fisrt saw the synaptics touch pad settings window through my first "Other User" profile 1, in Mouse Properties->Device Settings->Synaptics LuxPad V7.4->Settings, all the options in this window were available for selection and no one was diabled. Now when I go to "Administrator" Profile, Some of the options in this settings window are disabled and appear to be partly hidden. Like the option "Enable Pinch Zoom in Pinch Zoom section" and "Enable Pivot Rotate in Rotating" appears to be hidden/disabled.
For verifying this, I created the another "Other user" profile 2 but no success and I found the same problem here also. I also tried to unistall the synaptics driver several times from all the profiles but every time I re-installed them and checked to get the same result. The settings were only accessible for "Other User" Profile 1 each time and were disable for Administrator profile and "Other User" Profile 2. I can produce the snaps of same if required.
I just restored this computer with the factory reset and with the bios password the system diabled key is 59036668.
View 2 Replies View RelatedMy Presario CQ57 started asking for a bios password and I have never set one. When i enter wrong one 3 times it generates this error code 61229567.
View 1 Replies View Related