Lenovo 11e E530 E/Edge :: Installed New Ssd - Can't Get It To Boot
Jul 10, 2013
I just bought the Thinkpad e530 with the 1tb+16 or so ssd cache harddrive. I decieded i wanted a ssd instead, so I bought a Samsung SSD 840 Series. - but since I removed the old 1tb harddrive and installed the ssd, I cant get it to boot. In bios I changed the boot priority so it looks like this when I get to the boot menu:
ATA HDD0: Samsung SSD 840 Series
Windows Boot Manager
Windows Boot manager
ATAPI CD0: PLDS DVD-RW DS8A8SH
ATA HDD2: SanDisk SSD U100 16 gb
PCI LAN
When I press enter on the SSD, nothing happens. When i press enter on the DVD, the screen goes black and then back to boot menu (the DVD is a installation for windows 7 of my own. There were any CDs with the lenovo) When I press enter on the first Windows boot manager, screen goes black and then back to boot menu. When I press enter on the second windows boot manager it give the error message with the status: 0xc0000225 (something with newly change of hardware or software). Its the same message when i press on the HDD2.
How can I get it to boot up so i can boot the DVD so I can install windows on my SSD?
[URL]
View 8 Replies
ADVERTISEMENT
Jan 15, 2015
I have a Lenovo Thinkpad Edge E530. Occasionally I will have the following icon pop up on my screen and refuse to go away: A reverse google image search told me this is the logo for the "thinklight", which as far as I know is not actually equipped on this model. As a side note, I have seen this happen on a friend's E530 as well.
View 4 Replies
View Related
Dec 18, 2011
How can I enter the bios in a recently purchased Edge e530 ??
View 9 Replies
View Related
Sep 19, 2013
I have E530 with 1TB disk and 16GB mSSD disk, which is partioned in 2 partitions. Now, I suspect Express Cache is using it somtimes, but I never see any usage from it in Task Manager. Task Manager Screengrab.However, sometimes Express Cache goes nuts on my HD, doing the opposite of what it is supposed to be doing Resource Monitor Showing Express Cache thrashing my HD
However, it seems to be doing something, sometime. I suspect it is from rebooting, but I rarely reboot my computer, so I'm not gaining much from it. I just formatted that mSATA drive and perhaps put the windows swap file and perhaps other cache folders there? I always feel that the disk I/O is the bottleneck of this computer, it feels slow when accessing the disk.
View 9 Replies
View Related
Jul 2, 2012
My E530's battery drains 5% per day after power off. I searched online and somebody else complained about similar issue on his Y-series laptop. His problem was solved by plugging off power cord before turning off the laptop. Lenovo also updated BIOS regarding this issue for his model after then.
Yesterday I tried his way and the issue was gone too. Can Lenovo update BIOS regarding this issue?
I also find the power manage scheme doesn't work. It always charges the battery from 96% to 100% in whatever scheme I chose. I tried to uninstall the driver and downgrade the power manager, still doesn't work. I didn't try reinstall the system because it is too time consuming. Does it matter I installed win7 in my SSD?
View 9 Replies
View Related
Mar 4, 2013
I have a Thinkpad E530 which has a 1366x768 display panel. Unfortunately, This resolution began to be low for my usage (some applications don't even enter the screen entirely!), so I'm searching for a higher resolution panel (like 1600x900 or 1920x1080). Could this be made or the new screen wouldn't work?
View 1 Replies
View Related
Jul 8, 2013
I've got a brandnew Thinkpad E530 with Windows 8 and integrated Camera. But the Camera is not wotking. When I start the Camera-App, the green Light of the Camera starts to shine, but there is no preview. Theres is only a picture of a crossed camera. Also if i start skype, my skype-partner can't see me.
I already had a look in the BIOS if the Camera is enabled (it is) and reinstalled the driver of the camera.
View 9 Replies
View Related
Feb 3, 2011
On they old keyboard, there was a dedicated green indicatory light on the key itself, which is missing on the keyboard. Now, I realize that the new keyboard affects all thinkpads alike, but the reason I'm posting this here is because my Thinkpad Edge (E530) has a dedicated numpad, thereby making me use the numlock much more often
I am aware of the often-suggested windows 7 software-sided fix: screen resolution > advanced settings > on screen display
However, the issue with this is that is that it groups the caps lock and numlock together. What if I want the numlock to be default on and NOT shown on-screen, but still wanted to be reminded on-screen if I [accidentally] have the caps lock on?
Is there a solution to this or is this another problem that Lenovo overlooked when upgrading the keyboard?
View 4 Replies
View Related
Feb 23, 2013
I have recently updated the BIOS on my E530 laptop to version 2.08 (the previously installed version was 1.xx, probably 1.37 as far as I remember, but am not sure about the exact version..). After the update the laptop keyboard and touchpad stopped working in Windows.
The keyboard does, however, work in the BIOS and both (keyboard and touchpad) work when the computer enters the Windows-startup-screen (where it suggests to fix hard drive errors etc.).
I am using Windows 8 all along and before I never had problems with my hardware. Now both the keyboard and touchpad are recognized in Window's Device manager, but are known to have troubles. There is also a PCI Device recognized in the category "Other devices", but it's missing any drivers (I wonder if there is a connection..). All those three are recognized as such by the Lenovo Solutions Center as well.
I have tried reinstalling the UltraNav drivers, but it wouldn't work. Also, I've tried finding any possible configuration regarding my problem in the BIOS, but was unsuccessful. If I attach an external mouse or keyboard, they work. I really don't know what else to do to get my laptop's keyboard & touchpad working!
The complete description of my laptop is: ThinkPad Edge E530 (3259-HLG), running Windows 8 (x64).
View 6 Replies
View Related
Aug 15, 2012
I installed new bios update downloaded from lenovo website (file h0uj03ww.exe). Immediately after succesful update message balloon popped up saying my battery is not genuine.
The battery is original, part of the notebook when i bought it and so far the system recognized battery as genuine.
Previous bios number was 1.12, new one is 1.14
Notebook model is 3259-C5G.
View 6 Replies
View Related
Oct 16, 2013
I have an Thinkpad edge E530 Laptop with Firefox 30. In this browser the Fingerprint Reader software Does not work.
View 4 Replies
View Related
May 18, 2013
I can't found my camera device in device manager and there is no imaging devices in device manager. There is no camera tab in Communication Settings (Fn+F5)...
I tried to install
"Integrated Camera Driver (1.0M) for Windows 7 (32-bit, 64-bit), XP - Notebooks"
"Integrated Camera Driver (0.3M) for Windows 7 (32-bit, 64-bit), XP - Notebooks"
but nothing happened ..
In the first time when I installed the windows the camera was working but now it's not !!
My Laptop is : ThinkPad Edge E530
My OS is : Windows 7 32-bot
View 4 Replies
View Related
Dec 20, 2013
I've problem with my notebook. After clean installation of win7 64bit, installation of all drivers with lenovo update and windows update is the hibernation option behaving in strange way.
The screen turns black but the computer is still working and when I start moving with mouse it shows me the login screen. So basically it just logs me off.
I tried to instal newest drivers of Chipset, Graphical card, Bios.... the option in cmd: powercfg -h is turned on... nothing worked. I also updated powr manager soft and driver.
View 1 Replies
View Related
Jul 25, 2012
I have a brand new E530 with 16 GB SSD. Product Code: 3259A29.
I installed the ExpressCache with the installer at C:SWTOOLSAPPSExpressCache. All went well and the machine ran faster, for a day.
Now I updated the Harddisk Protection, as recommended by the ThinkVantage System Update to Version 1.77.0.5.
Since this I get an error message at boot time: "2102: Detection Error on HDD2 (Mini SATA). Press ESC to continue." After ESC the machine boots.
But ExpressCache is not working any more. At the command line the command eccmd.exe -info says "**ERROR** ECCmd Requested device is not available : 2."
I suppose, that the update of HD-protection ruined the ExpressCache - cache.
How can I fix ExxpressCache? To any options of eccmd.exe it returns the above error message.
View 8 Replies
View Related
Aug 6, 2014
I'm using a lenovo thinkpad edge e530.
I have a problem changing my BIOS settings after installing win8.1 and enabling bitlocker. I wanted to reformat the partition it was on, so I wiped it with gparted and now all settings in bios are greyed out and I cannot change anything. What can I do to be able to edit my BIOS?
I also have linux installed on my computer if I could do anything from there.
View 1 Replies
View Related
Jun 28, 2012
Since the past couple of days I am receiving this Error 2102: Detection error in HDD2 during every cold/warm boot. It pops up even after a complete powerdown for overnight and boot up the next day. Further, the boot itself has become very slow - shows blank screen until the Thinkpad logo is displayed, followed by which the error message pops up.
Thinkpad Edge E530 - i5-3210M -upgraded 8GB RAM - 750 GB, 16GB mSATA HDD Performance Booster
View 2 Replies
View Related
Jun 3, 2014
Dolby Advanced Audio v2 issue .....
I added a second drive (SSD) successfully to the E540, everything works and is set up properly. I still have the original HDD in place and got Windows 8.1 (x64) installed on both drives. However, I cannot run Dolby Advanced Audio v2 when booting from the (fresh) Windows installation on the SSD. Right after booting or trying to start the application there is a Windows error message telling me that the Dolby-driver cannot be run and I should reinstall the application if the error continues to exist.
When booting from the original HDD there is no problem with Dolby Advanced Audio v2, the application just works fine. Whenever booting from SSD the error message comes up.
I know that this is a known issue and I've read all the information that is out there on the internet. I tried uninstalling and reinstalling from the DRIVERS folder on C: multiple times, installed everything in different orders and tried almost every combination of using the SETUP in AUDIO, the SETUP in DOLBY, the UIUa64 and so on. I can't install Dolby Advanced Audio v2 on the new SSD properly. The installation finishes and Dolby Advanced Audio v2 is shown in the list of installed programs, but immediately after finishing the installation the error message also occurs.
(I exactly followed the reported solutions for other systems, but none of them worked for me. In which order I have to run the driver setup(s) for my E540 if you think this is a possible error source.) I really do not know what could cause the error message while the (seemingly) exact installation still works while booting from the original HDD?
(I am not referring to Dolby Digital Plus but Advanced Audio v2! The Dolby Digital Plus user interface is accessible on SSD. The sound quality varies tremendously between the two Windows installations on HDD and SSD and the loss of sound quality is unacceptable for me.)
View 1 Replies
View Related
Dec 10, 2014
Today I received my brand-new E540 from Amazon. Upon inserting the battery and starting the laptop for the very first time, I was greeted by the following error message:
The battery installed is not supported by this system and will not charge.
Please replace the battery with the correct Lenovo battery for this system.
Press the ESC key to continue.
The message has only appeared once and hasn't been shown on subsequent reboots.
I proceeded to install Windows 7 which worked fine. Under Windows the battery symbol in the taskbar would say "66%. Plugged in. Not charging". I then shutdown the system and re-inserted the battery. Since then the battery appears to be charging normally and when I inspect the battery symbol in Windows it says something like "89% charged. Plugged in. Charging."
Seeing how this is a brand-new laptop, do you think the battery is broken and I should return the laptop, or should I keep it since it seems to be working normally now.
View 1 Replies
View Related
Nov 14, 2013
just received my new E531 Edge Thinkpad from Lenovo.
Right now I'm not able to boot from CD, it will always boot into the preinstalled Windows 8.
I've tried the F12 method to select a different boot device during startup where I can see the installed DVD RAM drive and select it, but no effect it returns immediately to the select screen.
I've played around with the various BIOS setting disabling the secure boot option and changing the boot order so that the DVD drive is first. Then the system will check for the the CD (you can hear it spinning during start up) but will start into Windows 8 right afterwards again.
I checked with various bootable CDs as well as DVDs but always same effect.
What am I missing? Any other BIOS or Windows 8 settings I need to change for that.
I have other Lenovo notebooks running like the X230, the T520 or an older T61 where booting from CD never seems to be an issue.
As the DVD drive is working correctly within Windows 8 I assume that it is in general functioning and shouldn't be broken.
View 2 Replies
View Related
Mar 13, 2012
About half the time I boot up my laptop the bios hangs and I have to hard-reboot it to get it to work. Is there anything I can do?
View 2 Replies
View Related
Nov 7, 2014
I purchased a Edge E545 that came pre loaded with Win7 Pro 64. I created the Recovery disks for Win7 and used the Win 8 Disks to upgrade the OS. I have created a new NTFS partition on my hard drive and would like to install Win 7 to that partition. I have tried to load the recovery disks to install into that partition but I have not been successful; the boot disk won't even load. I downloaded the Win7 Pro 64 ISO to try and load it into that partition but the computer does not have the COA sticker under the battery like it's supposed to.
I have recovery disks that won't load at restart or cold boot and I have a perfectly good ISO that i don't have a COA to.
View 4 Replies
View Related
Jun 20, 2014
When my E531 is connected to Onelink Dock Pro and the lid is closed, at least 50% of times it won't boot up. When I open the lid, either there is a boot screen or the screen is blank. Usually when I hold the power button for a few seconds and then try again, computer boots normally. For me it seems this is some kind of a BIOS issue because Windows is not booted yet. Sometimes the problem occurs when the lid is open too. Without the dock the computer functions properly.
At first i had a BIOS version 1.23 (which I didn't found on the internet btw) and then tried to fix a problem by downgrading to 1.22. I also changed several BIOS options reagarding the booting process. I have the computer on a shelf where the lid cannot be opened.
View 9 Replies
View Related
Jun 5, 2013
I own an Edge 15, 64 bit processor. It came with 2gb RAM. I recently purchased and installed two 4 gb cards for a total of 8gb RAM. I updated my BIOS. Under "Computer>Properties" it is showing only 4 gb Install RAM. Why is it not reading or the system not using the additional 4 gb of RAM on the second card?
View 3 Replies
View Related
Feb 24, 2008
I installed the FX2500M upgrade on Monday, and last night I did a reapplication of the AS5 on the cpu, and when I put everything back in and booted back up....NOTHING!!! The screen was very very dim, although the image was visible, which made me first think it was a power issue with the lcd display. Plugged in an external monitor, picture comes out fine, but i8kfangui can't read the GPU's temp anymore?
So I chat with the infamous people over at Dell, and to my surprise, within 10 minutes they promise a replacement display. I think my problems are solved.
But just for kicks, I throw in my old ATI Radeon X1400 in and lo and behold....the big DELL BIOS logo pops up, bright and beautiful! Everything is back to normal, except now I don't have the wonderful graphics performance that my FX2500M was giving me.
Now I'm absolutely lost...how could the FX2500M be producing a dim image on the laptop display if it outputs perfectly to an external monitor? I find no correlation between the back light of the lcd display and the output of the GPU, especially if another gpu works fine.
View 15 Replies
View Related
Feb 1, 2013
I bought for my dell 1526 a kit of 4gb ddr2 667mhz (2 x 2 gb) but the problem is that the laptop does not boot with the ram kit installed.I tried to use only one module of 2 gb and is the same thing. It powers up and stays with the power led on and does nothing.I tried a separate 1 gb module and the laptop works fine.Can it be that the ram is bad or incompatible?
View 4 Replies
View Related
Jun 17, 2012
Wife's 1720 originally came with one 250GB SATA HDD running Vista Business 32-bit. I decided to upgrade it and have bought Windows 7 Home Premium and 2 SATA SSDs. A 60GB Intel 520 series SSD is placed in HDD bay 1 and a 120GB Intel 330 series SSD is placed in HDD bay 2.
When I powered it up with the windows 7 disc, the machine will not boot up at all. After the initial bios screen with the progress bar, it just goes to a black screen with a blinking cursor. I cannot go to bios by pressing F2 nor into boot menu by pressing F12.
I eventually decided to remove the 120 GB SSD and this time, it booted up and installed Windows 7 on the 60B SSD. After installation and driver updates and reboots, I shut it down and re-installed the 120GB SSD. I selected F2 during boot and inspected the BIOS. It has detected both SSDs so I exited the BIOs and Windows 7 booted up without issues. I then formatted the 120GB with simple volume and then transfered wife's data from her old 250GB HDD (now in a Nexstar external case) to the 120GB HDD.
After installing some additional apps and McAfee AV, I restarted it. However, it is failing to boot again. Same old thing. Cannot go into BIOS by pressing F2 and cannot go into boot menu by pressing F12. I have not removed the 120GB SSD yet to see if it is causing the issue.
View 9 Replies
View Related
Apr 3, 2009
I'm trying to figure this out. I've done some searches and googled some more but to no avail.
I recently migrated over from PC so I might be having a harder time than some.
Anyway, I installed Windows XP Pro SP3 without a hitch. After installing it, I tried to remove the CD in order to install my bootcamp drivers. No luck. I tried right clicking CD drive and then eject, no luck. I tried all other possible methods in Windows to eject it, no luck.
I ended rebooting and holding down the trackpad and it finally ejected. Anyway, my hope was that installing bootcamp will help the issue but it didnt. When I'm in Windows and holding down the eject button, I would see the eject graphics pop up on screen, but nothing comes out. HOwever, the CD drive reads without a problem.
Any other things that I can do? Am I required to use SP2 when installing? Also, everything is fine in Mac OS.
View 10 Replies
View Related
Sep 18, 2014
I have been working on computers for almost 20 years and this has me completely confused. My Aspire V3-571-6643 laptop was working fine until just recently. The system will power on and show the Acer screen and then immediately reboots. It will stay in this reboot loop until manually stopped.
I cleaned and reseated the RAM module and also tried it in both slots with no change. I was able to access BIOS and determined the drives and all settings are correct and even reset to factory defaults with no change. I then pulled the HDD to use in a docking station to determine if the drive was salvagable. Everything reads fine and passed both short and long tests via SeaTools. With the HDD installed the system won't try to boot to CD/USB but after removing it the system will boot to CD just fine. I then ran a full scan using Eurosoft Pc-Check and everything is fine. I reinstalled the HDD and immediately get the reboot loop again.
At this point the mainboard and HDD both test fine independently but will not work together. My only guess is that the mainboard is no longer supplying enough power for all of the components and crashing when the HDD tries to spin up on boot. That, or the SATA controller is malfunctioning and only working for the ODD.
View 4 Replies
View Related
Sep 19, 2014
I'm a PC repair technician and have been working on computers for almost 20 years and this has me completely confused. My Aspire V3-571-6643 laptop was working fine until just recently. The system will power on and show the Acer screen and then immediately reboots. It will stay in this reboot loop until manually stopped.
I cleaned and reseated the RAM module and also tried it in both slots with no change. I was able to access BIOS and determined the drives and all settings are correct and even reset to factory defaults with no change. I then pulled the HDD to use in a docking station to determine if the drive was salvagable. Everything reads fine and passed both short and long tests via SeaTools. With the HDD installed the system won't try to boot to CD/USB but after removing it the system will boot to CD just fine. I then ran a full scan using Eurosoft Pc-Check and everything is fine. I reinstalled the HDD and immediately get the reboot loop again.
At this point the mainboard and HDD both test fine independently but will not work together. My only guess is that the mainboard is no longer supplying enough power for all of the components and crashing when the HDD tries to spin up on boot. That, or the SATA controller is malfunctioning and only working for the ODD.
View 4 Replies
View Related
Sep 15, 2014
I have upgraded the OS to Win 7 Home Premium, 32 bit, and had the hard drive upgraded to a 320 GB SATA drive. The system will boot flawlessly with the SATA drive installed, it will not boot with the 500Gb Samsung 840 EVO SSD drive installed.
When the power button is pressed the power light lights up, the hard drive activity light lights up, the CPU cooling fan comes on, the DVD drive light comes on and you hear a couple of clicks then it turns off.
Is there a special setting in BIOS that needs to be made or is this notebook simply unable to use an internal SSD drive?
View 3 Replies
View Related
