I purchased a Edge E545 that came pre loaded with Win7 Pro 64. I created the Recovery disks for Win7 and used the Win 8 Disks to upgrade the OS. I have created a new NTFS partition on my hard drive and would like to install Win 7 to that partition. I have tried to load the recovery disks to install into that partition but I have not been successful; the boot disk won't even load. I downloaded the Win7 Pro 64 ISO to try and load it into that partition but the computer does not have the COA sticker under the battery like it's supposed to.
I have recovery disks that won't load at restart or cold boot and I have a perfectly good ISO that i don't have a COA to.
The brightness on my new E545 with Windows 8.1 fluctuates weirdly while browsing the web or doing other this. This is really annoying. It will fade and then suddly flash to a brighter setting.
I already disabled the adaptive brightness in the power options and it still does it.Searching around the web I see a bunch of suggestions that are related to Intel graphics adapters but nothing related to AMD.
Last month I bought a Lenovo e545. I did an upgrade to windows 8.1 on my new system. After upgrading, I noticed several problems with my drivers and installation of them(Conextant audio driver, Windows location driver). Also none of the Windows 8 games work. So I thought I'd do a sfc /scannow first. There I got the message the system is locked. So I thought to reinstall my backup on the recovery partition. This also said the disk is locked. I tried reInstalling from a home made external USB hard disk with original recovery system, this also won't work. This makes all my recovery disks useless so I can not restore my computer if anything goes wrong...
Now the base of the problem might be influenced by one of these factors:
In trying to solve the problem I accidentally downgraded the BIOS from 1.10 to 1.09 (so maybe this infuences the Windows certificates in the BIOS, maybe a technician can tell me if this can happen) and can not find the 1.10 BIOS on the website to be downloaded and upgrade the BIOS again.I added 4 GB crucial RAM (1600)The Windows 8.1 upgrade is a pain in the ass and blocks the possibility somehow to recover the system. I really need to be able to recover the system to preform a clean system install...
I just purchased a new E545, which has the unusual keyboard layout that I like -- the Control key inside of the special Fn key. Of course, it seems Lenovo has gone and switched the way the function keys operate so that now you have to press the Fn key to get the F-keys.
How can I swap the function keys operation so that I need the Fn key to operate the PC and media controls?
I got my W540 recently with windows 8.1 pro on it. but as all engineers worst nightmare windows 8 has hard time with engineering softwares (for my case TIA Portal for PLC programming software which only support windows 7). so i need to have a windows 7. i prefer to keep my windows 8 and have dual boot system with windows 7 added. But i can't install windows 7. initially due to disk type (GPT), then i changed it to MBR without losing my files (which only was possible if i had deleted the recovery partition- now my recovery is on my flash drive). But there are already 4 partitions on the system (1 for C: drive and 3 for recovery and system files which came originally with the product) , how can i install a windows 7? i can't add another partition because that makes my disk a Dynamic disk. i really need windows 7 on my system ASAP.
I have recently purchased a W540 and connected to my Dell u3011 30" monitor. I used the Dual Link DVI-D cable that came with the monitor and plugged it into my Ultra Dock. The maximum resolution i can get is 1920x1080? When i change over to a Display port cable i can achieve the full 2560 x 1600 resolution? Is there something i need to do in addition to achieve the full 2560x1600 resolution with the DVI-D dual link cable? I want to be able to connect 2 laptops to the one monitor and only have 1 display port input so i need to be able to use the DVI cable on the 2nd machine while still achieving 2560x1600 resolution.
just received my new E531 Edge Thinkpad from Lenovo.
Right now I'm not able to boot from CD, it will always boot into the preinstalled Windows 8.
I've tried the F12 method to select a different boot device during startup where I can see the installed DVD RAM drive and select it, but no effect it returns immediately to the select screen.
I've played around with the various BIOS setting disabling the secure boot option and changing the boot order so that the DVD drive is first. Then the system will check for the the CD (you can hear it spinning during start up) but will start into Windows 8 right afterwards again.
I checked with various bootable CDs as well as DVDs but always same effect.
What am I missing? Any other BIOS or Windows 8 settings I need to change for that.
I have other Lenovo notebooks running like the X230, the T520 or an older T61 where booting from CD never seems to be an issue.
As the DVD drive is working correctly within Windows 8 I assume that it is in general functioning and shouldn't be broken.
ThinkPad Edge, Win 7 Sp1. For the last month I have had a problem with the control key always down. Programs react as if the control key were pressed. MS Word 7 gives an error message that the control key is down and asks if I want to go to Safe Mode. I have had the keyboard replaced with no change. The computer has been thoroughly checked, all drivers, patches, software upgrades have been made by my Tech, and the Bios has been flashed.
Last week, I found a post on Google for Win XP where the poster had the same problems. The fix was to ensure that the Sticky Keys were turned off in Ease of Access on the Control Panel. I went to Ease of Access and turned off all of the selections, and the fix seemed to work. However, yesterday the problem reoccurred. I don't know if it is a problem with the motherboard, hardware, or with Windows. It appears that this problem affects more than one version of Windows.
I am experiencing issues with my touchpad on my Thinkpad Edge AMD with 4 GB Ram.
Sometimes the touchpad will work and sometimes it will not respond. When I restart the computer, it will work but not for long. I have the up-to-date drivers which came with the machine. I just received my machine 2 days ago.
I just purchased these 2 new dual monitors whose input connectors only come in HDMI, DisplayPort, and Mini DisplayPort. I'm using a X230 with a Ultrabase 3 and I can't seem to get the 2nd monitor up and working... My first one is being used through the displayport direclty on my laptop (left side).
Is it not possible to get both monitors using a combination of these cables? Would buying a converter (HDMI or displayport --> VGA) solve the problem?
I just purchased the E540. Running Win 7.1. I have 2 WD 3.0 Passport drives plugged into a USB 3.0 hub. The 3.0 hub has the correct cable for 3.0. They are not being recognized as 3.0 devices (I get a message). I updated the USB 3.0 driver on lenovo's site and BIOS is set to auto.recognize. I have also tried the 3.0 option in the BIOS but that didn't do anything. I also tried using the drives without the hub in one of the 3.0 USB slots but that didn't do anything either.
I have checked the forum but what I found was possibly purchasing a 3.0 cable (not necessary - my cable is 3.0 compliant) but that was for a Wn 8 system or updating 3.0 device driver (done). So much for plug and play.
This laptop shows "no operating system found" when I power up. I ran knoppix which works but I tried pressing F8 to get to the CMD prompt but it doesn't work, I can get into the BIOS, anything I can do in the bios to do either a system restore or run the recovery?
I just reinstalled windows 7 on my edge 13 (cause the system really slowed down), everything's working so far, expect the WLan Device. The network adapter (realtek RTL8168D/Familie-PCI-E-Gigabit-Ethernet-NIC) is properly detected, if i plug in a Lan cable I have got a connection.
I already tried this Lenovo Update tool, it installed some drivers and updates, but still no change. I already tried all Wifi drivers from lenovo homepage without success. Hitting the F9 Button didn't change a thing.
Just a got a brand new Thinkpad 540-E. So far this CPU runs like a beast(with a new SSD installed). I have one minor issue though...
GOAL:: Make the F1-F12 keys function without having to press Fn first.
So I've tried the three tips I've come across online. Here is what happens:
1. BIOS(ThinkpadSetup): I only get the option to switch the Fn and Ctrl key. There are no option in my BIOS to do anything else with the keyboard/mouse settings.
2. Holding down the Fn key for 30 sec to 1 minute: Nothing happens. I even tried to do a three minute press and hold. I had a blast, but nothing came out of that neither.
3. Entering the keyboard settings in Win 7 manually: So I have no trouble entering the keyboard settings window, but mine looks extremely limited. In fact I see no options to do anything in there besides updating the driver.
I am planning to upgrade my RAM on my E420(1141CTO). It already has a 4 Gb on one slot. Couple of questions here.
1. What is the max RAM I can go upto on this E420 (Intel i3 2nd Gen) laptop. 2. As I have 4 GB on one slot can I put one 8Gb RAM (single module) on the other slot. 3. What brand of RAM I can use. 4. On this model can I fix another RAM myself easily or asking it the other way are the slots placed such that I can do it easily by merely oepning a couple of screws or do I have to tear everything apart. 5. Any other special considerations like about clock speed ?
With this laptop, the CPU usage rises significantly whenever the battery is charging. If I'm on running on battery power or it's fully charged, I don't have this problem. The CPU stays at 2-3% while browsing the internet, for example. But browsing the internet while the battery is charging will send the CPU up to 90-100%. It's not just browsing the internet, but any task, such as running Sony Vegas, using Skype, watching a movie, etc.
Again, this only happens while the battery is charging. Everything runs much, much slower. All power management settings are identical whether it be running on battery or charging with the AC adapter, so it's not that. I am also using the 65w power adapter that was supplied with the computer, and the adapter becomes very hot to the touch while charging.
I have recently purchased a Lenovo ThinkPad Edge E540, with Windows 7 installed. I'm trying to use the integrated camera with Skype, but I can record no picture. When I try to install the Integrated Camera Driver from Lenovo Support, [UR], the setup always fails with Engrish error messages.
I just got a brand new Edge 335 with Windows 8 Pro 64 bit installed. It has 8 GB RAM, and AMD E2-2000 APU. I've had a couple of issues with this. One was that I couldn't turn on Bluetooth in Windows 8 (fixed by installing an older version of Thinkpad Hotkey features software). The other issue which is still unresolved is that of virtualization.
AMD virtualization is enabled in the BIOS. However, Windows 8 as well as the AMD virtualization tool both state it is turned off. I have, after searching these forums and the web, disabled it, cold booted the machine (removing battery), re-enabled it, cold booted again (also removed the battery). However, Windows just doesn't want to accept that it's enabled.
AMD virtualization and DEP were both enabled when I got the laptop from Lenovo. Is there anything else I need to turn on/ off?
I have bought my new E540 some days ago. My keyboard is Norwegian so there is a key called AltGr available which is used as a combinational key similar to shift. when I just press the key related to backslash ( it's '+') it works fine but when I want to type backslash (it's AltGr and '+' together) it does not work.
I have a ThinkPad Edge 15. It had a charging problem from the day I purchased it. The people I bought it from sent it back to IBM/Lenovo who apparently tightened the area where the charging cord goes into the PC?
That did NOT fix the issue, so when I got my laptop back, I called LEnovo, they sent me a new battery (even though I told them the 'Power Manager' said the battery was in good condition) which did nothing. Then they sent me a new charging cord, again-nada. They sent me a box to send the laptop back to them. As I was figuring out how to put the laptop in the box, I looked over @ my PC, and lo and behold; the light that tells you if it is charging was shining!
Last night. I looked @ the charging icon; '15%, not charging'! Oops! Oh dear, not again! Went to power manager, everything is just fine. Checked all of my connections, same thing. I left the laptop plugged in. This morning as I look over @ the laptop & Guess WHAT! It was charging, the light was on! I turned it on...