Lenovo E531 11e E/Edge :: Won't Boot When Connected To OneLink Dock Pro (lid Closed)
Jun 20, 2014
When my E531 is connected to Onelink Dock Pro and the lid is closed, at least 50% of times it won't boot up. When I open the lid, either there is a boot screen or the screen is blank. Usually when I hold the power button for a few seconds and then try again, computer boots normally. For me it seems this is some kind of a BIOS issue because Windows is not booted yet. Sometimes the problem occurs when the lid is open too. Without the dock the computer functions properly.
At first i had a BIOS version 1.23 (which I didn't found on the internet btw) and then tried to fix a problem by downgrading to 1.22. I also changed several BIOS options reagarding the booting process. I have the computer on a shelf where the lid cannot be opened.
View 9 Replies
ADVERTISEMENT
Jan 4, 2015
I have recently bought ThinkPad E540 with OneLink Pro Dock, in which I have connected my LG Flatron IPS236 external display. LG's max resolution is Full HD 1920x1080, but for some reason my external display's max resolution is only 1280x1024. The display is attached to the OneLink Pro Dock's DVI port. I have both updated the graphic card's drivers and LG monitor's drivers and booted the system. I have also tried using both 75 hertz and 60 hertz refresh rates.
View 2 Replies
View Related
Nov 14, 2013
just received my new E531 Edge Thinkpad from Lenovo.
Right now I'm not able to boot from CD, it will always boot into the preinstalled Windows 8.
I've tried the F12 method to select a different boot device during startup where I can see the installed DVD RAM drive and select it, but no effect it returns immediately to the select screen.
I've played around with the various BIOS setting disabling the secure boot option and changing the boot order so that the DVD drive is first. Then the system will check for the the CD (you can hear it spinning during start up) but will start into Windows 8 right afterwards again.
I checked with various bootable CDs as well as DVDs but always same effect.
What am I missing? Any other BIOS or Windows 8 settings I need to change for that.
I have other Lenovo notebooks running like the X230, the T520 or an older T61 where booting from CD never seems to be an issue.
As the DVD drive is working correctly within Windows 8 I assume that it is in general functioning and shouldn't be broken.
View 2 Replies
View Related
Jun 25, 2014
I have a X1 Carbon and a OneLink Pro dock. I have it setup with evey thing working, no issue's whatsoever. My concern is that when the laptop is completly charged while connected to the dock, is there any way to switch to battery while staying connected to the dock to be able to use the extrnal monitor, ethernet, and usb ports etc?
What i have noticed is that even when the battery is 100% charged , the dock keeps charging as the battery doesnt fall below 100% and in long term it will reduce the battery life.
View 5 Replies
View Related
Oct 8, 2014
We have one setup with 2 Dell 24" Ultrasharp monitors (U2412M) using the display port and DVI port. The fact that I couldn't get native resolution of the screens when having dual monitors is strike one but I understand. If you only have 1 of them i would get native resolutions with the display port.
Anyways I had problems with the machine crashing and always when docked. I made sure the dock had the latest firmware and that the driver was also updated. It crashed so much that eventually the hard drive got corrupted. It kept showing NTFS errors so Lenovo replaced the drive for me. I was really crossing my fingers hoping the drive was bad in the first place thus all my problems.
Nope it still crashes! The client just can't use laptop with the onelink pro dock. I already have the latest drivers too.
View 6 Replies
View Related
Feb 25, 2014
I have an issue with the OneLink dock and the ethernet port. Initially it was working but after a BIOS update it now always gives me "Unknowns USB device".
I just got my hands on a i7 X1 Carbon 2 and a OneLink Pro dock and at first it all worked out as it should.
After a while the "System update" prompted me that there were updates I let it run, including an updateof BIOS from 1.06 to 1.07. Now I can no longer get it to work.
Whenever i plug it in i know get: Windows has stopped this device because it has reported problems. (Code 43)
The SuperSpeed link to the USB device keeps going to an error state Compliance. If the device is removable, remove the device and then disable/enable from device manager to recover.
I even did a full system restore and started from the beginning...
View 4 Replies
View Related
May 15, 2014
How can I configure Bitlocker in X1 Carbon using Win8.1 so that the laptop won't ask the freaking Bitlocker Recovery Key every time when I boot the laptop IN the OneLink Pro Dock station AFTER I've used the machine WITHOUT the docking station (or vice versa)?
Bitlocker works OK if I boot the laptop every time in same mode (using always docking station OR not using it ever). However, I need to use the laptop in both modes; with the docking station (at work) and without it (at home and when travelling). And I'm not wanting to type the looooooooong Bitlocker Recovery Key every time when I boot the laptop in different mode.
How can I tell for the Bitlocker that both these modes are trusted ones?
View 3 Replies
View Related
Dec 3, 2013
Yesterday my fingerprint reader worked correctly, but today I turned on my computer and I could not log in using my fingerprint reader. Then I looked to device manager and there was an unkown device. So I tried to reinstall fingerprint drivers but even though it still does not work and in device manager is "unknown device". How to make it work? I tried to install this driver: [URL] ..... I use Win7 64bit.
View 9 Replies
View Related
Sep 16, 2013
I have a problem with my dvd-rom. Whenever Im on battery, dvd-rom automatically turns itself off and I'm not able to turn it on again, clicking "power on" doesn't have any affect, and there is no setting in power manager that is related to this.I tried to reinstall microsoft drivers for dvd device,I tried to update PM and PM driver, but it didn't work. When I remove it in device manager and reboot system then it is ok, but this solution lasts until next boot.
View 7 Replies
View Related
Nov 13, 2013
I have a brand new Edge E531 that I have upgraded to Win 8.1. I am trying desperately to learn to use the TouchPad, and by tweaking the various settings I am able to get it to work ok.
Except for one thing: sometimes, it seems that the TouchPad will automatically perform the default action in a dialog box or click a button automatically.
I have gone through all the settings and see nothing related to this.
Is this known behavior? Can it be prevented?, I know I can disable the TouchPad and only use TrackPoint, but since Lenovo no longer has separate right and left mouse buttons, I find it hard to use.
View 3 Replies
View Related
Sep 5, 2013
I have a Lenovo E531 and Upon turning the Laptop on after having it unplugged for a short period of time, it will turn on to a screen that says..."Battery Critical" or something to that effect, telling me it can't boot and to plug the machine in. So I turn off the laptop, pull the battery out, plug the battery back in and then turn it on and it boots just fine.
View 1 Replies
View Related
Feb 6, 2009
I just installed Skype, mostly to test the camera, and the green light is on but I can't see anything. Skype just shows an outline of a camera with a diagonal line though it no matter which camera option I pick.
View 3 Replies
View Related
Nov 27, 2014
Lenovo thinkpad edge e531 - How to know charge fully?
View 9 Replies
View Related
Dec 11, 2013
So i bought a new refurb e531 i7 3632qm 4rb ram 500gb 7200rpm drive. Machine runs awesome however As soon as i turned it on i noticed it gave a battery not geunine message from the bios had to push esc to continue.
Ignored it figured maybe it would learn the battery or something.
Anyhow its been a good 10 hours now still give me the message as well as i noticed its not charging when plugged in. In an attempt to fix this i have.
updated bios. Uninstalled and reinstalled newest power management software and driver's shutdown system unplugged power cord pulled battery and waited 30seconds and reinsterted battery then charger.
Im so far not impressed with this geunine battery firmware built into the system cant even detect their own battery !!
View 4 Replies
View Related
Nov 13, 2013
I have a new Edge 531 just upgraded to Win 8.1. The Lenovo Solution Center gives me a Virus Protection Alert - even though Norton says all is OK. When i click to enable anti-virus in the Solution Center, nothing happens. How do I cancel the message?
View 3 Replies
View Related
Aug 4, 2011
After installation updates from Lenovo Update I always get error "rundll" when I start system with message: There was a problem starting C:Program The specified module could not be found.
I have new E531 with Windows 8 and after Windows Updates was all right.
View 1 Replies
View Related
Oct 28, 2013
I just purchased a Thinkpad Edge model E531. The shop transferred data from my previous laptop. I am getting an alert message that says I only have1.21G free of 13.67G on my primary drive. Is this a problem, and how can this be the case on a new machine...
View 3 Replies
View Related
Nov 5, 2013
I have Thinkpad Edge E330 bought this July, with win8 downgraded to win7. It recently started a problem where the laptop's own display doesn't display anything (just blank) if I don't have external display connected. The external display doesn't have be in use, just connected, and E330's own display works fine. If I disconnect the external display, the E330's own display goes blank also. It doesn't matter what display setting I have.Currently I'm not able to use my E330 as a laptop at all.
View 2 Replies
View Related
Oct 14, 2012
I can't get past BIOS when my W530 is connected to an external hard drive, in my case a WD My Book Essential 3TB (USB 3.0).
Here are some previous threads I've found:
-W520 hangs on boot when a WD SES USB drive is connected
-W520 won't boot with SES device connected to USB
-W530 stuck or won't boot when WD external drive plugged in.
I would be satisfied if I could disable USB Legacy Support in BIOS and move on, but I can't find that option anywhere on my W530.
Here's what I've tried so far:
-Updated BIOS to the latest version (1.11) and updated WD My Book firmware.
-Changed the port (tried both USB 2.0 and 3.0, powered and unpowered) that the drive is connected to.
-Removed everything except my MSATA drive in boot priority. I can't enter BIOS settings when the WD drive is connected so I can't actually exclude it from the boot priority, but I've tried to enable Boot Order Lock.
-Disabled USB options in BIOS (USB UEFI BIOS Support, Always on USB, etc.).Switched between Quick and Diagnostic boot. With Quick it's stuck at the Thinkpad splash screen, with Diagnostic I just get a black screen.
-Tried with both GPT and MBR partitions styles for the external drive.
-Changed between UEFI and Legacy.Tried it with my friend's Thinkpad T520, wouldn't boot either with the drive connected...
Other information:
My Thinkpad is docked to a Thinkpad Mini Dock Plus Series 3 with USB 3.0 (170W). I haven't bothered to try it undocked, but judging from the other posts it's not likely to fix the issue.
Surprisingly I don't have this issue with my older WD My Book Essential Edition 2.0 1TB (USB 2.0) external hard drive. I don't think it would work to simply remove the drive from boot priority. I've removed my other external hard drive but I can still hear it spinning up during boot (when the Thinkpad splash screen shows up), which suggest that it's still being identified during boot. Is there really no workaround other than "get a different enclosure" or "unplug it when powering on"? Are there any >3TB external hard drives, preferably USB 3.0, that are known to work?
View 9 Replies
View Related
Jan 29, 2014
I run the W530 with a dual boot setup with Windows 7 and a Ubuntu distro, with the Windows as the default one.
Every time I try to boot and there happen to be a memory stick or a drive connected to the computer, it freezes on boot at the Windows logo. If I unplug the memory stick, everything is fine and it boots up normally.
Ive purchased a Thinkpad 12,7 mm SATA HDD Bay Adapter III and a Samsung 840 EVO, 500GB, SSD. Now when I swapped the DVD drive with the new SSD the same freeze happens ever time I try to boot. Ive tried to connect the new SSD to the computer and formatted it beforehand. But it keeps freezing.
Im not sure if this relates to my dual boot setup or what.
View 2 Replies
View Related
Jul 10, 2013
I just bought the Thinkpad e530 with the 1tb+16 or so ssd cache harddrive. I decieded i wanted a ssd instead, so I bought a Samsung SSD 840 Series. - but since I removed the old 1tb harddrive and installed the ssd, I cant get it to boot. In bios I changed the boot priority so it looks like this when I get to the boot menu:
ATA HDD0: Samsung SSD 840 Series
Windows Boot Manager
Windows Boot manager
ATAPI CD0: PLDS DVD-RW DS8A8SH
ATA HDD2: SanDisk SSD U100 16 gb
PCI LAN
When I press enter on the SSD, nothing happens. When i press enter on the DVD, the screen goes black and then back to boot menu (the DVD is a installation for windows 7 of my own. There were any CDs with the lenovo) When I press enter on the first Windows boot manager, screen goes black and then back to boot menu. When I press enter on the second windows boot manager it give the error message with the status: 0xc0000225 (something with newly change of hardware or software). Its the same message when i press on the HDD2.
How can I get it to boot up so i can boot the DVD so I can install windows on my SSD?
[URL]
View 8 Replies
View Related
Mar 13, 2012
About half the time I boot up my laptop the bios hangs and I have to hard-reboot it to get it to work. Is there anything I can do?
View 2 Replies
View Related
Nov 7, 2014
I purchased a Edge E545 that came pre loaded with Win7 Pro 64. I created the Recovery disks for Win7 and used the Win 8 Disks to upgrade the OS. I have created a new NTFS partition on my hard drive and would like to install Win 7 to that partition. I have tried to load the recovery disks to install into that partition but I have not been successful; the boot disk won't even load. I downloaded the Win7 Pro 64 ISO to try and load it into that partition but the computer does not have the COA sticker under the battery like it's supposed to.
I have recovery disks that won't load at restart or cold boot and I have a perfectly good ISO that i don't have a COA to.
View 4 Replies
View Related
Oct 29, 2009
I just bought a HP Mini 311.Whenever I try to boot the Mini 311 with my Logitech Wireless Mouse receiver connected through USB, the netbook will just freeze on the HP Logo. When I unplug the USB dongle, it boots just fine. I've already tried to find a way to fix it through the BIOS, but so far nothing's worked.
View 9 Replies
View Related
May 2, 2009
It seems that since I updated to Vista and to Window 7 subsequently I can't get the audio to work out of my dock. It works fine out of the side of my laptop.
Any ideas on this? I wouldn't think it is a driver issue as sound does work.
View 6 Replies
View Related
Jun 5, 2013
I own an Edge 15, 64 bit processor. It came with 2gb RAM. I recently purchased and installed two 4 gb cards for a total of 8gb RAM. I updated my BIOS. Under "Computer>Properties" it is showing only 4 gb Install RAM. Why is it not reading or the system not using the additional 4 gb of RAM on the second card?
View 3 Replies
View Related
Sep 9, 2014
I got my w540 in about 2 weeks ago, and finally had a chance to start migrating everything to it last week. I bring my laptop(s) to and from work everyday and right now I'm bringing a w520 and my new w540. But everyday since I started bringing my w540 home with me when I get home the laptop is running when I take it out of my bag.
So yesterday and this morning, I made 100% sure the laptop was in sleep mode and nothing was running before I put the laptop in the bag. I get to work 15 minutes later and the laptop bag is about 150 degrees because the w540 is running even through the lid is closed.
View 2 Replies
View Related
Jul 2, 2014
I just received my Lenovo X1 Carbon; it's a very good product and I really like it. Everything is working as expected (fast & smooth) except one thing: laptop works kinda strange with the closed lid
My product code is 20A70037US, I'm running Windows 8.1 Pro.
I've chosen (in power options) that laptop does nothing when lid is closed. Yes, it works but... I'm using TeamViewer to connect to laptop; it works but TeamViewer periodically loses connection and displays message "The screen can't be captured at this moment..", Microsoft installer (I'm installing Visual Studio 2013) is paused (!), and Google Chrome won't render pages (but Internet Explorer works fine).
If I open the lid, all symptoms described above are disappear: installer resumes downloading, Chrome render html pages correctly and TeamViewer works fine (no periodical messages shown).
For me it looks like laptop not in "normal" operational state but kinda under power saving.
I've set power option to "High performance" (laptop is plugged) but it doesn't work.
View 4 Replies
View Related
Jul 11, 2011
Okay, so all was working fine until today, my webcam has stopped working, When i boot Dell Webcam Central i get a message at the bottom stating "No supported webcam connected".
Video chats on MSN and facebook do not work, it's like the webcam no longer exists.
I think it was caused by some other webcam software, which i've since uninstalled.
I've tried reinstalling the "Quanta H.264 Integrate Webcam Rev: A00" driver from the resource disk - it did not work.
I've tried to use system restore to restore to a time i KNOW the webcam was working, it did not work.
I was trying to find the executable to reinstall Webcam Central to see if that had any effect, Went to the "Download Factory Installed Software (My Dell Downloads)" section of the website, and i get this message:
Register Your System
Please proceed to register your system by clicking "Register New System". Registration will allow us to display the software entitled for download. You will be automatically registered after your click "allow" on the service tag scanning utility.
I tick the box and click Register System - Nothing happens. It just stays on the same page. I thought this was because i was in Firefox so i tried IE... same problem. Except this time IE has an error on page.
So... i tried emailing dell support... yet ANOTHER error:
Error determining system information. Please try again later.
I try to use the live chat... guess what...! for contacting Dell Chat. We are sorry to inform you that the Chat support is no more available for the product selected. For complex technical query, requiring an immediate response, please contact our technical support phone hotline. For non-complex technical query, please contact Dell technical support by E-mail.
View 15 Replies
View Related
Aug 15, 2012
I'm experiencing very strange problem with my Dell Vostro 3750. This machine is equipped with USB 2.0 capable USB ports and USB 3.0 capable ports. During the power-up any USB devices (or even multiple devices via hub) can be connected to the USB 2.0 capable port. However if even a single device is connected to one of the USB 3.0 capable ports, the system doesn't start.
I've reported the problem on the Linux kernel related lists: 59561
But the only answer was, that I should report it to Dell suggesting fixing of BIOS. Maybe this is a BIOS related problem, but Windows 7 starts on the same hardware configuration without problems.
As I'm mainly using Linux for my work, two USB ports are practically useless for me, I have to connect all my USB stuff via hubs to USB 2.0 ports.
My current BIOS (after last BIOS upgrade) is:
DMI: Dell Inc. Dell System Vostro 3750/0VP036, BIOS A12 02/22/2012
View -1 Replies
View Related
